Electrochemical Mass Spectrometry Research Articles

Probing the Origin of Overpotential for Sodium‐Oxygen Batteries with Distribution of Relaxation Time

AbstractSodium‐oxygen batteries are emerging as new battery systems. Deep understanding of the origin of overpotential and the kinetic process in sodium‐oxygen batteries remain challenging yet critical. We apply a method of distribution of relaxation time (DRT) to decipher the electrochemical impedance spectroscopy (EIS), allowing us to monitor the changes of different kinetic processes during the discharging and charging. The origin of the overpotential in a battery was further comprehensively investigated combining DRT analysis with differential electrochemical mass spectrometry, Raman and other characterizations. Overpotential is found to primarily stem from oxygen mass transport during discharging, and from poor solid‐solid contact at the electrode surface during charging. Our work demonstrates the study of kinetic processes using DRT analysis, and suggests effective ways to improve the performances of sodium‐oxygen batteries.

Unlocking the potential of lattice oxygen evolution in stainless steel to achieve efficient OER catalytic performance

Excellent OER catalysts can enhance the efficiency of hydrogen production from electrolytic water. The development of low-cost, abundant, and highly efficient catalysts remains crucial for the electrolytic hydrogen production industry. In this work, we have developed a highly efficient and cost-effective stainless steel-based OER catalyst using a strategy combining anodic corrosion and structural reconstruction. This approach is not only simple and easy to scale up production, but more importantly, it can also achieve controllable switching of lattice oxygen evolution mechanism (LOM). Specifically, in a 1 M KOH electrolyte, this catalyst achieves current densities of 500 mA/cm² and 1000 mA/cm² with remarkably low overpotentials of only 347 mV and 382 mV, respectively. Moreover, the catalyst exhibits exceptional stability even under high industrial current densities. In-situ differential electrochemical mass spectrometry (DEMS) experiments provide direct evidence of the transition from the adsorbate evolution mechanism (AEM) to the LOM. Through comprehensive characterizations and density functional theory (DFT) calculations, we have elucidated the underlying mechanism responsible for the improved performance and identified key factors influencing the induction of the LOM. This work provides support and new insights for the design and preparation of high-performance steel-based electrolytic water catalysts.

Impact of Transition Metal Layer Vacancy on the Structure and Performance of P2 Type Layered Sodium Cathode Material.

This study explores the impact of introducing vacancy in the transition metal layer of rationally designed Na0.6[Ni0.3Ru0.3Mn0.4]O2 (NRM) cathode material. The incorporation of Ru, Ni, and vacancy enhances the structural stability during extensive cycling, increases the operation voltage, and induces a capacity increase while also activating oxygen redox, respectively, in Na0.7[Ni0.2VNi0.1Ru0.3Mn0.4]O2 (V-NRM) compound. Various analytical techniques including transmission electron microscopy, X-ray absorption near edge spectroscopy, operando X-ray diffraction, and operando differential electrochemical mass spectrometry are employed to assess changes in the average oxidation states and structural distortions. The results demonstrate that V-NRM exhibits higher capacity than NRM and maintains a moderate capacity retention of 81% after 100 cycles. Furthermore, the formation of additional lone-pair electrons in the O 2p orbital enables V-NRM to utilize more capacity from the oxygen redox validated by density functional calculation, leading to a widened dominance of the OP4 phase without releasing O2 gas. These findings offer valuable insights for the design of advanced high-capacity cathode materials with improved performance and sustainability in sodium-ion batteries.

The zinc ion concentration dynamically regulated by an ionophore in the outer Helmholtz layer for stable Zn anode

The Zn dendrite limits the practical application of aqueous zinc-ion batteries in the large-scale energy storage systems. To suppress the growth of Zn dendrites, a zinc ionophore of hydroxychloroquine (defined as HCQ) applied in vivo treatment is investigated as the electrolyte additive. HCQ dynamically regulates zinc ion concentration in the outer Helmholtz layer, promoting even Zn plating at the anode/electrolyte interface. This is evidenced by the scanning electron microscopy, which delivers planar Zn plating after cycling. It is further supported by the X-ray diffraction spectroscopy, which reveals the growth of Zn (002) plane. Additionally, the reduced production of H2 during Zn plating/stripping is detected by the in-situ differential electrochemical mass spectrometry (DEMS), which shows the resistance of Zn (002) to hydrogen evolution reaction. The mechanism of dynamic regulation for zinc ion concentration is demonstrated by the in-situ optical microscopy. The hydrated zinc ion can be further plated more rapidly to the uneven location than the case in other regions, which is resulted from the dynamic regulation for zinc ion concentration. Therefore, the uniform Zn plating is formed. A cycling life of 1100 h is exhibited in the Zn||Zn symmetric cell at 1.6 mA cm−2 with the capacity of 1.6 mAh cm−2. The Zn||Cu battery exhibits a cycling life of 200 cycles at 4 mA cm−2 with a capacity of 4 mAh cm−2 and the average Coulombic efficiency is larger than 99 %. The Zn||VO2 battery with HCQ modified electrolyte can operate for 1500 cycles at 4 A g−1 with a capacity retention of 90 %. This strategy in the present work is wished to advance the development of zinc-ion batteries for practical application.

Lattice Oxygen Activation through Deep Oxidation of Co4N by Jahn–Teller–Active Dopants for Improved Electrocatalytic Oxygen Evolution

AbstractTriggering the lattice oxygen oxidation mechanism is crucial for improving oxygen evolution reaction (OER) performance, because it could bypass the scaling relation limitation associated with the conventional adsorbate evolution mechanism through the direct formation of oxygen–oxygen bond. High‐valence transition metal sites are favorable for activating the lattice oxygen, but the deep oxidation of pre‐catalysts suffers from a high thermodynamic barrier. Here, taking advantage of the Jahn–Teller (J–T) distortion induced structural instability, we incorporate high‐spin Mn3+ ( ) dopant into Co4N. Mn dopants enable a surface structural transformation from Co4N to CoOOH, and finally to CoO2, as observed by various in situ spectroscopic investigations. Furthermore, the reconstructed surface on Mn‐doped Co4N triggers the lattice oxygen activation, as evidenced experimentally by pH‐dependent OER, tetramethylammonium cation adsorption and online electrochemical mass spectrometry measurements of 18O‐labelled catalysts. In general, this work not only offers the introducing J–T effect approach to regulate the structural transition, but also provides an understanding about the influence of the catalyst's electronic configuration on determining the reaction route, which may inspire the design of more efficient catalysts with activated lattice oxygen.

Lattice Oxygen Activation through Deep Oxidation of Co4N by Jahn-Teller-Active Dopants for Improved Electrocatalytic Oxygen Evolution.

Triggering the lattice oxygen oxidation mechanism is crucial for improving oxygen evolution reaction (OER) performance, because it could bypass the scaling relation limitation associated with the conventional adsorbate evolution mechanism through the direct formation of oxygen-oxygen bond. High-valence transition metal sites are favorable for activating the lattice oxygen, but the deep oxidation of pre-catalysts suffers from a high thermodynamic barrier. Here, taking advantage of the Jahn-Teller (J-T) distortion induced structural instability, we incorporate high-spin Mn3+ ( ) dopant into Co4N. Mn dopants enable a surface structural transformation from Co4N to CoOOH, and finally to CoO2, as observed by various in situ spectroscopic investigations. Furthermore, the reconstructed surface on Mn-doped Co4N triggers the lattice oxygen activation, as evidenced experimentally by pH-dependent OER, tetramethylammonium cation adsorption and online electrochemical mass spectrometry measurements of 18O-labelled catalysts. In general, this work not only offers the introducing J-T effect approach to regulate the structural transition, but also provides an understanding about the influence of the catalyst's electronic configuration on determining the reaction route, which may inspire the design of more efficient catalysts with activated lattice oxygen.

Cu into Cu2O/RuAl intermetallic heterojunction for lowering the thermodynamic energy barrier of the CO2 reduction and evolution reactions in Li–CO2 battery

The Li–CO2 battery has been under the spotlight of future battery technologies since it can achieve CO2 utilization and energy conversion simultaneously. However, its advancement is hampered by poor energy efficiency and limited reversibility due to the sluggish kinetics of the CO2 reduction and evolution reactions. Herein, a multiscale nanoporous interpenetrating‑phase nanohybrid of RuAl intermetallic and Cu2O (MP-Cu2O/RuAl) was carved by driving synchronous phase and microstructure evolutions through dealloying of one RuCuAl master alloy. The built-in RuAl intermetallic and Cu2O closely stack to form abundant nano-interfaces with revolutionized electronic structure. The theoretical simulations reveal that the Cu2O/RuAl interface can distinctly reduce the energy barrier of the Li2CO3 decomposition reaction. The interconnected pore channels with large surface area can enhance catalytic site accessibility, mass transfer, and uniform deposition of the discharge products. In situ differential electrochemical mass spectrometry discloses that the CO2-to-electron ratio during charging coincides with the theoretical value of 3/4, demonstrating the high efficacy of MP-Cu2O/RuAl in achieving the recycling of CO2. The dealloying protocol provides an affordable platform to empower transition metal oxides into high-efficiency electrocatalysts by hybridizing with metallic nano-sponge for advancing the application of Li–CO2 batteries.

Defluorination of Organofluorine Compounds Using Dehalogenase Enzymes from Delftia acidovorans (D4B).

Organofluorine compounds have been widely used as pharmaceuticals, agricultural pesticides, and water-resistant coatings for decades; however, these compounds are recognized as environmental pollutants. The capability of microorganisms and enzymes to defluorinate organofluorine compounds is both rare and highly desirable to facilitate environmental remediation efforts. Recently, a strain of Delftia acidovorans (D4B) was identified with potential biodegradation activity toward perfluoroalkyl substances (PFAS) and other organofluorine compounds. Genomic analysis found haloacid and fluoroacetate dehalogenases as enzymes associated with Delftia acidovorans. Here, defluorination activity of these enzymes toward different fluorinated substrates was investigated after their recombinant expression and purification from E. coli. Using an electrochemical fluoride probe, 19F NMR, and mass spectrometry to monitor defluorination, we identified two dehalogenases, DeHa2 (a haloacid dehalogenase) and DeHa4 (a fluoroacetate dehalogenase), with activity toward mono- and difluoroacetate. Of the two dehalogenases, DeHa4 demonstrated a low pH optimum compared to DeHa2, which lost catalytic activity under acidic conditions. DeHa2 and DeHa4 are relatively small proteins, operate under aerobic conditions, and remain active for days in the presence of substrates. Significantly, while there have been many reports on dehalogenation of monofluoroacetate by dehalogenases, this study adds to the relatively small list of enzymes reported to carry out enzymatic defluorination of the more recalcitrant disubstituted carbon in an organofluorine compound. Thus, DeHa2 and DeHa4 represent organofluorine dehalogenases that may be used in the future to design and engineer robust defluorination agents for environmental remediation efforts.

Chemical Origin of in Situ Carbon Dioxide Outgassing from a Cation-Disordered Rock Salt Cathode.

In situ carbon dioxide (CO2) outgassing is a common phenomenon in lithium-ion batteries (LiBs), primarily due to parasitic side reactions at the cathode-electrolyte interface. However, little is known about the chemical origins of the in situ CO2 released from emerging Li-excess cation-disordered rock salt (DRX) cathodes. In this study, we selectively labeled various carbon sources with 13C in cathodes containing a representative DRX material, Li1.2Mn0.4Ti0.4O2 (LMTO), and performed differential electrochemical mass spectrometry (DEMS) during galvanostatic cycling in a carbonate-based electrolyte. When charging LMTO cathodes, electrolyte solvent (EC) decomposition is the dominant source of the CO2 outgassing. The amount of EC-originated CO2 is strongly correlated with the total surface area of carbon black in the electrode, revealing the critical role of electron-conducting carbon additives in the electrolyte degradation mechanisms. In addition, unusual bimodal CO2 evolution during the first cycle is found to originate from carbon black oxidation. Overall, the underlying chemical origin of in situ CO2 release during battery cycling is highly voltage- and cycle-dependent. This work further provides insights into improving the stability of DRX cathodes in LiBs and is envisioned to help guide future relevant material design to mitigate parasitic reactions in DRX-based batteries.

Setup Design and Data Evaluation for DEMS in Sodium Ion Batteries, Demonstrated on a Mn‐Rich Cathode Material

AbstractDifferential electrochemical mass spectrometry (DEMS) is a powerful operando method for analyzing side reactions in batteries. We describe our DEMS setup highlighting the relevance for implementing a reference electrode. Although the method provides valuable information, the correct assignment of the DEMS signals to types of gases and quantifying the amounts released can be challenging. A frequent limitation is that gas concentrations are calculated from single m/z ratios. This has the drawback of overlooking unexpected gases which can cause misinterpretation of the signal intensities, or even attributing to gases which are not actually formed. We present a multiple concentration determination (MCD) algorithm that uses the full MS‐spectra, which allows a more reliable determination of the gas release. We demonstrate this approach for Na‐ion half‐cells with P2‐Na0.67Mn3/4Ni1/4O2 (NaMNO) as cathode active material (CAM). Studying the gassing behavior for two electrolyte formulations (1 M NaPF6 in propylene carbonate (PC) and in diglyme (2G)). Against the general belief that glymes lead to more gassing at high potentials, we find that gas evolution for PC electrolytes is larger compared to 2G electrolytes. Dimethyl ether is found to be a decomposition product of 2G. Pressure change measurements are used to independently validate the gas quantification.

Metal Doped Unconventional Phase IrNi Nanobranches: Tunable Electrochemical Nitrate Reduction Performance and Pollutants Upcycling.

Electrochemical nitrate reduction (NO3RR) provides a new option to abate nitrate contamination with a low carbon footprint. Restricted by competitive hydrogen evolution, achieving satisfied nitrate reduction performance in neutral media is still a challenge, especially for the regulation of this multielectron multiproton reaction. Herein, facile element doping is adopted to tune the catalytic behavior of IrNi alloy nanobranches with an unconventional hexagonal close-packed (hcp) phase toward NO3RR. In particular, the obtained hcp IrNiCu nanobranches favor the ammonia production and suppress byproduct formation in a neutral electrolyte indicated by in situ differential electrochemical mass spectrometry, with a high Faradaic efficiency (FE) of 85.6% and a large yield rate of 1253 μg cm-2 h-1 at -0.4 and -0.6 V (vs reversible hydrogen electrode (RHE)), respectively. In contrast, the resultant hcp IrNiCo nanobranches promote the formation of nitrite, with a peak FE of 33.1% at -0.1 V (vs RHE). Furthermore, a hybrid electrolysis cell consisting of NO3RR and formaldehyde oxidation is constructed, which are both catalyzed by hcp IrNiCu nanobranches. This electrolyzer exhibits lower overpotential and holds the potential to treat polluted air and wastewater simultaneously, shedding light on green chemical production based on contaminate degradation.

Unraveling the Mechanism of Ammonia Electrooxidation by Coupled Differential Electrochemical Mass Spectrometry and Surface-Enhanced Infrared Absorption Spectroscopic Studies.

Ammonia electrooxidation has received considerable attention in recent times due to its potential application in direct ammonia fuel cells, ammonia sensors, and denitrification of wastewater. In this work, we used differential electrochemical mass spectrometry (DEMS) coupled with attenuated total reflection-surface-enhanced infrared absorption (ATR-SEIRA) spectroscopy to study adsorbed species and solution products during the electrochemical ammonia oxidation reaction (AOR) on Pt in alkaline media, and to correlate the product distribution with the surface ad-species. Hydrazine electrooxidation, hydroxylamine electrooxidation/reduction, and nitrite electroreduction on Pt have also been studied to enhance the understanding of the AOR mechanism. NH3, NH2, NH, NO, and NO2 ad-species were identified on the Pt surface with ATR-SEIRA spectroscopy, while N2, N2O, and NO were detected with DEMS as products of the AOR. N2 is formed through the coupling of two NH ad-species and then subsequent further dehydrogenation, while the dimerization of HNOad leads to the formation of N2O. The NH-NH coupling is the rate-determining step (rds) at high potentials, while the first dehydrogenation step is the rds at low potentials. These new spectroscopic results about the AOR and insights could advance the search and design of more effective AOR catalysts.

Surface Encapsulation of Layered Oxide Cathode Material with NiTiO3 for Enhanced Cycling Stability of Na-Ion Batteries

Abstract In Na-ion batteries, O3-type layered oxide cathode materials encounter challenges such as particle cracking, oxygen loss, electrolyte side reactions, and multi-phase transitions during the charge/discharge process. This study focuses on surface coating with NiTiO3 achieved via secondary heat treatment using a coating precursor and the surface material. Through in-situ X-ray diffraction (XRD) and differential electrochemical mass spectrometry (DEMS), along with crystal structure characterizations of post-cycling materials, it was determined that the NiTiO3 coating layer facilitates the formation of a stable lattice structure, effectively inhibiting lattice oxygen loss and reducing side reaction with the electrolyte. This enhancement in cycling stability is evidenced by a capacity retention of approximately 74% over 300 cycles at 1C, marking a significant 30% improvement over the initial sample. Furthermore, notable advancements in rate performance were observed. Experimental results indicate that a stable and robust surface structure substantially enhances the overall stability of the bulk phase, presenting a novel approach for designing layered oxide cathodes with higher energy density.

Experimental screening of intermetallic alloys for electrochemical CO2 reduction

In this study, we experimentally screen a promising class of intermetallic alloys for the electrochemical reduction of CO2 toward hydrocarbon products. Based on previous DFT-based screening papers, combinations of strongly CO-binding metals such as iron, cobalt, and nickel with weakly CO-binding metals such as gallium, aluminium or zinc were selected as potentially promising catalytic materials. Despite the challenging production of these alloys, we report a general two-step synthesis method for intermetallic alloys and discuss the specific synthesis conditions that must be taken into account when synthesising these materials. After their synthesis, we use a recently developed differential electrochemical mass spectrometry (DEMS) setup to rapidly quantify the CO2 reduction products over a range of potentials. Almost all newly developed intermetallic catalysts are shown to produce methane and ethylene, while the CoSn catalyst showed higher selectivity towards formate production. However, all tested catalysts mostly produced hydrogen and only reduce CO2 to a small extent, despite the favourable computational screening results. We discuss possible reasons for this discrepancy and outline a more holistic approach for linking future DFT studies with experiments.

Air-Stable and Low-Cost High-Voltage Hydrated Eutectic Electrolyte for High-Performance Aqueous Aluminum-Ion Rechargeable Battery with Wide-Temperature Range.

Aqueous aluminum-ion batteries (AAIBs) are considered as a promising alternative to lithium-ion batteries due to their large theoretical capacity, high safety, and low cost. However, the uneven deposition, hydrogen evolution reaction (HER), and corrosion during cycling impede the development of AAIBs, especially under a harsh environment. Here, a hydrated eutectic electrolyte (AATH40) composed of Al(OTf)3, acetonitrile (AN), triethyl phosphate (TEP), and H2O was designed to improve the electrochemical performance of AAIBs in a wide temperature range. The combination of molecular dynamics simulations and spectroscopy analysis reveals that AATH40 has a less-water-solvated structure [Al(AN)2(TEP)(OTf)2(H2O)]3+, which effectively inhibits side reactions, decreases the freezing point, and extends the electrochemical window of the electrolyte. Furthermore, the formation of a solid electrolyte interface, which effectively inhibits HER and corrosion, has been demonstrated by X-ray photoelectron spectroscopy, X-ray diffraction tests, and in situ differential electrochemical mass spectrometry. Additionally, operando synchrotron Fourier transform infrared spectroscopy and electrochemical quartz crystal microbalance with dissipation monitoring reveal a three-electron storage mechanism for the Al//polyaniline full cells. Consequently, AAIBs with this electrolyte exhibit improved cycling stability within the temperature range of -10-50 °C. This present study introduces a promising methodology for designing electrolytes suitable for low-cost, safe, and stable AAIBs over a wide temperature range.

Ethylene Glycol Co‐Solvent Enables Stable Aqueous Ammonium‐Ion Batteries with Diluted Electrolyte

AbstractAqueous ammonium‐ion batteries (AAIBs) are considered as one of the most promising technologies for large scale energy storage applications, due to their intrinsic safety, environmental friendliness and low cost. Nevertheless, the practical application of AAIBs is impeded by hydrogen evolution reaction (HER) occurring in diluted aqueous electrolyte. Highly concentrated electrolytes can improve electrochemical stability but lead to higher costs and increased hydrolysis of NH4+. In this work ethylene glycol (EG) is proposed as co‐solvent, which can act as H‐bond modulating agent, to increase the stability of AAIBs with diluted electrolytes. The perturbation of water H‐bond network regulated by EG is proved by spectroscopic methods, while the suppressed HER is confirmed by differential electrochemical mass spectrometry (DEMS) results. As a result, full cells with 3,4,9,10‐perylenebis(dicarboximide) (PTCDI) anode and FeFe(CN)6 (FeHCF) cathode and EG‐added electrolyte exhibit stable cycling performance with capacity retention of 77% after 1950 cycles.

Boosting the Proton Intercalation via Crystal Plane Optimization of TiS2 for Cycling‐Stable Aqueous Zn‐Ion Batteries

AbstractTiS2 has received significant attention as a promising anode for “Rocking‐Chair”‐type aqueous Zn‐ion batteries due to the large interlayer spacing and low discharge plateau. However, the structural distortion caused by the embedding of divalent Zn2+ as well as the undesirable hydrogen evolution reaction (HER) severely affects their cycling stability. Herein, a facet‐dependent mechanism is first deeply investigated to understand charge storage behaviors of TiS2 via differential electrochemical mass spectrometry, in situ electrochemical quartz crystal microbalance, and in situ X‐ray diffraction characterizations. By regulating the exposed crystal facets of TiS2 from (001) (TS (001)) to (011) (TS(011)), HER can be effectively inhibited, and the charge storage mechanism is transformed from Zn2+ insertion/extraction dominating to H+ insertion/extraction dominating, resulting in faster charge transfer kinetics and strong structure stability during long‐term cycling. Hence, TS(011) delivers a higher reversible capacity of 212.9 mAh g−1 at 0.1 A g−1 and a strong cycling stability of 74% capacity retention over 1000 cycles, much better than that of TS (001) with a reversible capacity of 164.7 mAh g−1 at 0.1 A g−1, a capacity retention of 17% after 1000 cycles. These new findings can provide deep insight into the rational design of high‐performance intercalation‐type electrode materials for energy storage applications.

Allotrope-dependent activity-stability relationships of molybdenum sulfide hydrogen evolution electrocatalysts

Molybdenum disulfide (MoS2) is widely regarded as a competitive hydrogen evolution reaction (HER) catalyst to replace platinum in proton exchange membrane water electrolysers (PEMWEs). Despite the extensive knowledge of its HER activity, stability insights under HER operation are scarce. This is paramount to ensure long-term operation of Pt-free PEMWEs, and gain full understanding on the electrocatalytically-induced processes responsible for HER active site generation. The latter are highly dependent on the MoS2 allotropic phase, and still under debate. We rigorously assess these by simultaneously monitoring Mo and S dissolution products using a dedicated scanning flow cell coupled with downstream analytics (ICP-MS), besides an electrochemical mass spectrometry setup for volatile species analysis. We observe that MoS2 stability is allotrope-dependent: lamellar-like MoS2 is highly unstable under open circuit conditions, whereas cluster-like amorphous MoS3-x instability is induced by a severe S loss during the HER and undercoordinated Mo site generation. Guidelines to operate non-noble PEMWEs are therefore provided based on the stability number metrics, and an HER mechanism which accounts for Mo and S dissolution pathways is proposed.

Dual-ion regulation of coordination chemistry for high-voltage stabilized P2-type cathode

P2-Na2/3Ni1/3Mn2/3O2 has shown great potential as cathode material for sodium-ion batteries with its high theoretical capacity and energy density. However, severe structural changes are induced by charging P2-Na2/3Ni1/3Mn2/3O2 above 4.2 V, resulting in rapid capacity decay and poor kinetic capability. In this study, we propose a Zn/Ti synergistic modification strategy to stabilize the P2-type cathode under high voltage. It is found that the P2-O2 phase transition with large volume change is replaced by a milder P2-Z phase transition with the noteworthy improvement in structural stability and Na+ diffusion kinetics, due to the disordered Na+/vacancy and the suppressed of the sliding of transition metal layers, as disclosed by density functional theory calculations and in-situ X-ray diffraction. Concurrently, The phenomenon of Ni and O reductive coupling is inhibited by regulating local O coordination owing to the incorporation of a strong Ti−O covalence bond, leading to the more reversible charge compensation mechanism and the inhibited lattice O evolution, as clearly revealed by ex-situ X-ray absorption spectroscopy and Differential Electrochemical Mass Spectrometry. Consequently, we obtained a stable P2-Na0.67Zn0.05Ni0.28Mn0.52Ti0.15O2 cathode, achieving an average discharge voltage of 3.62 V at 0.1 C and a capacity retention of 80% after 500 cycles at 2 C. This research provides valuable insights into the enhancement of sodium-ion battery cathode materials by utilizing different functional ions in synergy.

Suppressed Electrolyte Decomposition Behavior to Improve Cycling Performance of LiCoO2 under 4.6V through the Regulation of Interfacial Adsorption Forces.

Alleviating the decomposition of the electrolyte is of great significance to improving the cycle stability of cathodes, especially for LiCoO2 (LCO), its volumetric energy density can be effectively promoted by increasing the charge cutoff voltage to 4.6V, thereby supporting the large-scale application of clean energy. However, the rapid decomposition of the electrolyte under 4.6V conditions not only loses the transport carrier for lithium ion, but also produces HF and insulators that destroy the interface of LCO and increase impedance. In this work, the decomposition of electrolyte is effectively suppressed by changing the adsorption force between LCO interface and EC. Density functional theory illustrates the LCO coated with lower electronegativity elements has a weaker adsorption force with the electrolyte, the adsorption energy between LCO@Mg and EC (0.49eV) is weaker than that of LCO@Ti (0.73eV). Meanwhile, based on the results of time of flight secondary ion mass spectrometry, conductivity-atomic force microscopy, in situ differential electrochemical mass spectrometry, soft X-ray absorption spectroscopy, and nuclear magnetic resonance, as the adsorption force increases, the electrolyte decomposes more seriously. This work provides a new perspective on the interaction between electrolyte and the interface of cathode and further improves the understanding of electrolyte decomposition.