Electrochemical Surface Plasmon Research Articles

Electrochemical structure‐switching sensing using nanoplasmonic devices

In this article, the implementation of electrochemical plasmonic nanostructures functionalized with DNA‐based structure‐switching sensors is presented. eNanoSPR devices with open and microfluidic measurement cells are developed on the base of nanohole arrays in 100 nm gold film and applied for combined microscopic and electrochemical surface plasmon (eSPR) visualization. eSPR voltammograms and spectroscopy are performed using planar three electrode schematic with plasmonic nanostructure operated as working electrode. Limit of detection of eNanoSPR devices for oligonucleotide hybridization is estimated in the low nanomolar and applications for structure‐switching electro‐plasmonic sensing in complex liquids are discussed.

In Situ Study of Electropolymerized Poly(3-aminobenzoic acid) Thin Film on BD-R and DVD-R Grating Substrates by Electrochemical-Transmission Surface Plasmon Resonance Spectroscopy

The electropolymerization process and doping/dedoping properties of poly(3-aminobenzoic acid) (PABA) thin films on gold-coated commercial BD-R and DVD-R grating substrates were simultaneously studied by the combination of electrochemical technique and transmission surface plasmon resonance (TSPR) spectroscopy. The optical property as a function of the applied potentials and time dependence during electropolymerization were studied. The obtained TSPR wavelength scan spectra after electropolymerization showed that the maximum wavelength slightly shifted to longer wavelength indicating the increase of film thickness. In addition, the change during construction of PABA-based immunosensor for label-free detection of human immunoglobulin G can be observed.

Development of a Novel Electrochemical Surface Plasmon Resonance Instrument Based on a Mini Three Electrode Flow Cell

The construction and performance of a novel electrochemical (EC) surface plasmon resonance (SPR) instrument based on a mini three electrode flow cell that was designed and manufactured by MEMS technology is described. The working electrode is 50nm gold and counter and reference electrodes, made of Au and Ag/AgCl separately, are 0.6 mm in diameter. The flow channel is made of polydimethylsiloxane (PDMS) with 1mm in width, 200μm in depth, 5μL in volume. The process for activating and modifying the working electrode is given by the real-time SPR detection. The Cyclic voltammetry (CV) and SPR detection are conducted simultaneously in potassium ferricyanide solution system. It is proved that the signal of redox reaction and the change of refractive index have a well correlation by the potential sweep experiment. Four kinds of concentration of potassium ferricyanide are analyzed and the peak oxidizing current, obtained from the curve, is proportional to the respective concentration of the sample. The EC-SPR experiment is also carried out in CuSO4 system and the results is similar to potassium ferricyanide.