Electrocatalytic Nitrogen Reduction Research Articles

Catalysts with Trimetallic Sites on Graphene-like C2N for Electrocatalytic Nitrogen Reduction Reaction: A Theoretical Investigation.

Electrocatalytic nitrogen reduction reaction (NRR) is a green and highly efficient way to replace the industrial Haber-Bosch process. Herein, clusters consisting of three transition metal atoms loaded on C2N as NRR electrocatalysts are investigated using density functional theory (DFT). Meanwhile, Ca was introduced as a promoter and the role of Ca in NRR was investigated. It was found that Ca anchored to the catalyst can act as an electron donor and effectively promote the activation of N2 on M3. In both M3@C2N and M3Ca@C2N (M=Fe, Co, Ni), the limiting potential (UL) is less negative than that of the Ru(0001) surface and has the ability to suppress the competitive hydrogen evolution reaction (HER). Among them, Fe3@C2N is suggested to be the most promising candidate for NRR with high thermal stability, strong N2 adsorption ability, low limiting potential, and good NRR selectivity. The concepts of trimetallic sites and alkaline earth metal promoters in this work provide theoretical guidance for the rational design of atomically active sites in electrocatalytic NRR.

Transition metal ions doped into Haeckelite-MoS2 as highly efficient and selective electrocatalyst for nitrogen reduction reaction

Due to the high-cost energy and environmental damage of industrial ammonia production, utilizing the catalyst to improve the reaction efficiencies has been regarded as a potential way. In this work, the electrocatalytic nitrogen reduction reaction (NRR) of a series of transition metal atoms (TMs: 3d, 4d and 5d atoms) doped Haeckelite-MoS2 nanosheet (TM@HL-MoS2) is systematically investigated by using density function theory (DFT) calculations. Comparing with the HL-MoS2, the role of TM doping is highlighted by the partial density of status (PDOS) and the charge variations, which can provide an active site for NRR and serve as an intermediate for electron transfer from HL-MoS2 to adsorbed molecule. After evaluating the activation of N2 and the Gibbs free energy, the best catalyst can be found in the three possible NRR paths. Meanwhile, the further application of TM@HL-MoS2 is tested by the thermodynamic stability and the competitiveness with hydrogen evolution reactions.

Iron Monomers or Trimers on Nitrogen-Doped Carbon: Which Is Better for the Electrocatalytic Nitrogen Reduction Reaction?

The electrocatalytic nitrogen reduction reaction (NRR) presents an alternative method for the Haber-Bosch process, and single-atom catalysts (SACs) to achieve efficient NRR have attracted considerable attention in the past decades. However, whether SACs are more suitable for NRR compared to atomic-cluster catalysts (ACCs) remains to be studied. Herein, we have successfully synthesized both the Fe monomers (Fe1) and trimers (Fe3) on nitrogen-doped carbon catalysts. Both the experiments and DFT calculations indicate that compared to the end-on adsorption of N2 on Fe1 catalysts, N2 activation is enhanced via the side-on adsorption on Fe3 catalysts, and the reaction follows the enzymatic pathway with a reduced free energy barrier for NRR. As a result, the Fe3 catalysts achieved better NRR performance (NH3 yield rate of 27.89 μg h-1 mg-1cat. and Faradaic efficiency of 45.13%) than Fe1 catalysts (10.98 μg h-1 mg-1cat. and 20.98%). Therefore, our research presents guidance to prepare more efficient NRR catalysts.

“Capture-activation-recapture” mechanism-guided design of double-atom catalysts for electrocatalytic nitrogen reduction

Compared with the traditional industrial nitrogen fixation, electrocatalytic methods, especially those utilizing double-atom catalysts containing nonmetals, can give good consideration to the economy and environmental protection. However, the existing “acceptance-donation” mechanism is only applicable to bimetallic catalysts and nonmetallic double-atom catalysts containing boron atoms. Herein, a novel “capture-activation-recapture” mechanism for metal-nonmetal double-atom catalyst is proposed to solve the problem by adjusting the coordination environments of nonmetallic atoms and utilizing the activation effect of metal atoms on nitrogen. Based on this mechanism, the nitrogen reduction reaction (NRR) activity of 48 structures is calculated by density functional theory calculation, and four candidates are selected as outstanding electrocatalytic nitrogen reduction catalysts: Si-Fe@NG (UL = –0.14 V), Si-Co@NG (UL = –0.15 V), Si-Mo@BP1 (UL = 0 V), and Si-Re@BP1 (UL = –0.02 V). The analyses of electronic properties further confirm “capture-activation-recapture” mechanism and suggest that the difference in valence electron distribution between metal and Si atoms triggers the activation of N≡N bonds. In addition, a machine learning approach is utilized to generate an expression and an intrinsic descriptor that considers the coordination environment to predict the limiting potential. This study offers profound insight into the synergistic mechanism of TM and Si for NRR and guidance in the design of novel double-atom nitrogen fixation catalysts.

Rare-Earth Lanthanum-Evoked Amorphization and Optimization to Boost Ambient Nitrogen Fixation over Single-Atom Catalysts.

Single-atom catalysts (SACs) have been widely studied in a variety of electrocatalysis. However, its application in the electrocatalytic nitrogen reduction reaction (NRR) field still suffers from unsatisfactory performance, due to the sluggish mass transfer and significant kinetic barriers. Herein, a novel rare-earth-lanthanum-evoked optimization strategy is proposed to boost ambient NRR over SACs. The incorporation of La with a large atomic radius tends to break the atomic long-range order and trigger the amorphization of SACs, endowing a greater density of dangling bonds that could modify affinity for reactants and adsorbates. Moreover, with unique 5d16s2 valence-electron configurations, its presence could further enrich the electron density and enhance the intrinsic activity of single-metal center via the valence orbital coupling. As expected, the La-modified catalyst presents excellent activity toward the electrochemical NRR, delivering a maximum ammonia yield rate of 33.91 μg h-1 mg-1 and a remarkable Faradaic efficiency of 53.82%.

Electrochemical nitrogen reduction reaction catalyzed by a cucurbit[6]uril-phosphomolybdic-copper cation hybrid

The electrocatalytic nitrogen reduction reaction (NRR) provides an energy-saving and environmentally friendly method to synthesize ammonia. Herein, a molybdenum-containing hybrid material (Q[6]-PMA-Cu) was prepared form the assembly of Keggin-type phosphomolybdic acid (PMA) with cucurbit[6]uril (Q[6]) and Cu2+ cations. Q[6]-PMA-Cu with multiple active sites and stable properties not only enables a high selectivity for NRR, but also shows a distinct advantage to suppress HER process, affording a high ammonia yield of 135.04±4.25 µg h−1 mgcat−1 with a Faradaic efficiency (FE) of 85.48±3.33%. 15N2 isotope labeling and control experiments were conducted to verified the nitrogen resource of ammonia formation. The results of experiments and DFT calculations demonstrates the reaction mechanism along the alternate association pathway, of which the metal active sites (Mo & Cu) play crucial role in electron transfer and the presence of hydrophobic Q[6] is responsible to inhibit side reaction of HER.

Introduction of element Bi in the P-block promotes N2 activation for efficient electrocatalytic nitrogen reduction to produce ammonia

The synthesis of ammonia through electrocatalytic nitrogen reduction reaction (NRR) under ambient conditions is a presumable strategy. However, it still faces the problems of poor activity and low Faradic efficiency, so the development of efficient, stable and highly selective catalysts is of the importance. Molybdenum disulfide (MoS2) materials are widely used in NRR reactions owing to good electrical conductivity and abundant active sites, but the edge active site is the dual active site of NRR and competitive hydrogen evolution reaction (HER). Encouragingly, the strong interaction between elements in the P-block and N 2p orbitals results in excellent performance in adsorbing and activating nitrogen. Meanwhile, the partial occupation of p-orbitals by elements in the P-block also leads to poor HER activity. Herein, we introduced the P-block element Bi into 1 T-MoS2 and prepared Bi2S3/MoS2 composite. Taking advantage of the high conductivity of 1 T-MoS2 and the N2 adsorption and activation advantages of Bi element, an ammonia yield rate of 54.64 µg h−1 mg−1cat. and a high Faradic efficiency of 58.56 % were obtained. In addition, the active site and the evolution pathway of N2 reduction were investigated by in-situ infrared spectroscopy measurements and density functional theory (DFT). The in-situ infrared spectroscopy measurement results manifested the presence of the main intermediate transition state during the reduction of N2 to NH3. The calculation results indicated that N2 had the best adsorption on the introduced P-block element Bi, and the entire NRR reaction process followed an alternating pathway. This study reveals the synergistic effect of P-block elements and transition metal-based electrocatalytic materials on nitrogen reduction to ammonia synthesis.

Efficient Electrocatalytic Ammonia Synthesis via Theoretical Screening of Titanate Nanosheet-Supported Single-Atom Catalysts.

The electrocatalytic nitrogen reduction reaction (NRR) for synthesizing ammonia holds promise as an alternative to the traditional high-energy-consuming Haber-Bosch method. Rational and accurate catalyst design is needed to overcome the challenge of activating N2 and to suppress the competitive hydrogen evolution reaction (HER). Single-atom catalysts have garnered widespread attention due to their 100% atom utilization efficiency and unique catalytic performance. In this context, we constructed theoretical models of metal single-atom catalysts supported on titanate nanosheets (M-TiNS). Initially, density functional theory (DFT) was employed to screen 12 single-atom catalysts for NRR- and HER-related barriers, leading to the identification of the theoretically optimal NRR catalyst, Ru-TiNS. Subsequently, experimental synthesis of the Ru-TiNS single-atom catalyst was successfully achieved, exhibiting excellent performance in catalyzing NRR, with the highest NH3 yield rate reaching 15.19 μmol mgcat-1 h-1 and a Faradaic efficiency (FE) of 15.3%. The combination of experimental results and theoretical calculations demonstrated the efficient catalytic ability of Ru sites, validating the effectiveness of the constructed theoretical screening process and providing a theoretical foundation for the design of efficient NRR catalysts.

The intermediate valence state Mo5+ in Fe doping La2(MoO4)3 boosting electrochemical nitrogen reduction

NH3 is considered as an ideal fuel for fuel cells to achieve zero carbon emissions due to its high energy density (at liquefaction) and carbon-free properties. The zero-carbon clean electrocatalytic nitrogen reduction reaction (NRR) is one of the alternative routes for NH3 synthesis. The efficiency of NRR is restricted by the high stability of N N and the slow reaction rate. In this study, La2(MoO4)3 (LaMo), and x%Fe doping-LaMo (x = 3, 5, 7, and 10) are synthesized via a hydrothermal method. The strong electron-donating ability of Fe converts a part of Mo6+ to Mo5+ and Mo4+ improving the electronic environment. The presence of Mo5+, an intermediate valence state, facilitates the oxidation and reduction reactions and establishes rapid electron transport channels. The electron transport of Mo6+↔e−Mo5+ is easier than Mo6+↔2e−Mo4+. Furthermore, the Mo5+ activates N2 and enhances N2 adsorption, boosting the NRR performance. Importantly, the content of Mo5+ exhibits a positive correlation with NH3 yield rate (R2 = 0.89), and Faradaic efficiency (FE, R2 = 0.95). Consequently, the 5%Fe–LaMo exhibits the highest Mo5+ percentage (75.9 %) and NRR performance (NH3 yield rate:30.4 μg h−1 mgcat−1, FE: 3.6 %). Thus, this study proposes a method to enhance the NRR performance by element doping with strong electron-donating ability to regulate the Mo5+ percentage.

Remarkable Synergy Effect of Cu–Nb Oxide Nanorods toward Electrocatalytic Nitrogen Reduction: The Enhanced Mass and Electron Transfer

Remarkable Synergy Effect of Cu–Nb Oxide Nanorods toward Electrocatalytic Nitrogen Reduction: The Enhanced Mass and Electron Transfer

Boron-Doped PdRh Mesoporous Nanotubes for Electrocatalytic Nitrogen Reduction to Ammonia

Boron-Doped PdRh Mesoporous Nanotubes for Electrocatalytic Nitrogen Reduction to Ammonia

Tuning electronic environment of B sites in boron carbonitride nanoribbon boosts catalytic activity of reducing N2 to NH3

The electrocatalytic nitrogen reduction reaction (NRR) to synthesize ammonia is an important and challenging task in chemistry, where low-cost, highly active non-metallic catalysts such as boron carbonitride (BCN) are still highly desired. Tuning the electronic environment of the active site B is an effective approach to improve the NRR performance of BCNs. However, the study on the mechanism of this effect has been seriously neglected. The diversity and controllability in atomic arrangements of BCN make it suitable for studying the relationship between the local chemical environment of boron and the catalytic properties. To this end, we design four kinds of BCN materials named as homogeneous BCN nanoribbon and BCN nanosheet enriched with B − C active sites and localized phase-separated BCN nanoribbon and BCN nanosheet rich in B − N active sites, and theoretically screen the homogeneous type BCN nanoribbons that have better NRR performances. Meanwhile, we experimentally demonstrate that the optimized charge redistribution of B atoms in BCN skeleton by tuning the electronic environment makes the B − C sites being the effective centers in NRR, and arising the excellent NH3 productivity of 63.02 μg h−1 mg − 1 cat with a highest Faraday efficiency of 32.28 %.

Electronegative Phosphorus-Integrated Co2+ Active Sites for Enhanced Electrocatalytic Nitrogen Reduction.

In the quest for proficient electrocatalysts for ammonia's electrocatalytic nitrogen reduction, cobalt oxides, endowed with a rich d-electron reservoir, have emerged as frontrunners. Despite the previously evidenced prowess of CoO in this realm, its ammonia yield witnesses a pronounced decline as the reaction unfolds, a phenomenon linked to the electron attrition from its Co2+ active sites during electrocatalytic nitrogen reduction reaction (ENRR). To counteract this vulnerability, we harnessed electron-laden phosphorus (P) elements as dopants, aiming to recalibrate the electronic equilibrium of the pivotal Co active site, thereby bolstering both its catalytic performance and stability. Our empirical endeavors showcased the doped P-CoO's superior credentials: it delivered an impressive ammonia yield of 49.6 and, notably, a Faradaic efficiency (FE) of 9.6% at -0.2 V versus RHE, markedly eclipsing its undoped counterpart. Probing deeper, a suite of ex-situ techniques, complemented by rigorous theoretical evaluations, was deployed. This dual-pronged analysis unequivocally revealed CoO's propensity for an electron-driven valence metamorphosis to Co3+ post-ENRR. In stark contrast, P-CoO, fortified by P doping, exhibits a discernibly augmented ammonia yield. Crucially, P's intrinsic ability to staunch electron leakage from the active locus during ENRR ensures the preservation of the valence state, culminating in enhanced catalytic dynamism and fortitude. This investigation not only illuminates the intricacies of active site electronic modulation in ENRR but also charts a navigational beacon for further enhancements in this domain.

Boosting Electrocatalytic N2 Reduction to NH3 by Enhancing N2 Activation via Interaction between Au Nanoparticles and MIL-101(Fe) in Neutral Electrolytes.

Electrocatalytic nitrogen reduction reaction (NRR) has attracted much attention as a sustainable ammonia production technology, but it needs further exploration due to its slow kinetics and the existence of competitive side reactions. In this research, xAu/MIL-101(Fe) catalysts were obtained by loading gold nanoparticles (Au NPs) onto MIL-101(Fe) using a one-step reduction strategy. Herein, MIL-101(Fe), with high specific surface area and strong N2 adsorption capacity, is used as a support to disperse Au NPs to increase the electrochemical active surface area. Au NPs, with a high NRR activity, is introduced as the active site to promote charge transfer and intermediate formation rates. More importantly, the strong interaction between Au NPs and MIL-101(Fe) enhances the electron transfer between Au NPs and MIL-101(Fe), thereby enhancing the activation of N2 and achieving efficient NRR. Among the prepared catalysts, 15 %Au/MIL-101(Fe) has the highest NH3 yield of 46.37 μg h-1 mg-1 cat and a Faraday efficiency of 39.38 % at -0.4 V (vs. RHE). In-situ FTIR reveals that the NRR mechanism of 15 %Au/MIL-101(Fe) follows the binding alternating pathway and also indicates that the interaction between Au NPs and MIL-101(Fe) strengthens the activation of the N≡N bond in the rate-limiting process, thereby accelerating the NRR process.

Constructing Mo5+ sites in molybdenum oxide by lattice stress for efficient ammonia synthesis

Molybdenum oxide (MoO3) is a promising catalyst for electrocatalytic nitrogen reduction (eNRR). However, Mo sites with saturated coordination are not favorable to stable N2 adsorption. Herein, we employed sodium ions as electron donors to interact with the interlayer atoms of MoO3, causing localized lattice stress on it and weakening the M-O bond, thus inducing the Mo5+ active sites (NaxMoO3). The N2 temperature-programmed desorption (N2-TPD) result of the as-prepared NaxMoO3 exhibits that introducing Mo5+ could significantly improve the N2 adsorption on the catalyst’s surface. The optimized NaxMoO3 has an NH3 yield of 41.3 μg h−1 mg−1 at ambient temperature and an FE of 21.4 %, which is in the relatively advanced position in the contemporaneous studies. Both experiments and density-functional theory (DFT) calculation demonstrated that the Mo5+ sites can effectively reduce the d-orbital energy level of Mo, which significantly enhances the interaction with N2.

Directional design of the pyridine ligand functional block fine-tuned hydrophobicity to improve the electrocatalytic nitrogen fixation performance of the Co/Ni based MOFs-derived materials

A series of isostructural Co/Ni-MOFs with different linearly bridged bipyridines as organic linkers has been designed and synthesized. Experimental studies reveal that linker engineering by tuning the functional block of the pyridine-bridging units renders these MOFs derived materials with significantly improved electrocatalytic nitrogen reduction reactions (eNRR) to NH3. Among them, at −0.4 V vs reversible hydrogen electrode the one containing a 1,3,4-thiadiazole unit exhibits the best eNRR performance in 0.1 M Na2SO4 with the highest NH3 yield (39.7 μg h−1 mg−1) and Faraday efficiency (33.3 %). This excellent nitrogen fixation performance comes from the synergistic effect of the heterojunction formed by the Co2N component that is conducive to nitrogen fixation and the Co9S8 component that inhibits hydrogen evolution in the derived material. Significantly, the systematic tuning of the bridging ligands in MOFs provides a new pathway to develop eNRR electrocatalysts.

Theoretical insights into Mo cluster modified Fe5C2 catalysts for electrocatalytic nitrogen reduction

The pursuit of green ammonia synthesis via electrocatalytic nitrogen reduction (NRR) faces challenges in developing high-performance, selective electrocatalysts. Inspired by the nitrogenase Fe-Mo cofactor, this study explores the catalytic efficiency of Mo clusters anchored on Fe5C2 for NRR. We investigate structural stability, N2 adsorption, and Gibbs free energy, revealing that Mon clusters on Fe5C2 demonstrate robust NRR selectivity and notable catalytic activity. Each of the three cluster structures demonstrated superior adsorption capacity in the "side-on" configuration. Among the studied cluster configurations, the Mo5-Fe5C2 shows the lowest limiting potential (-0.24 V), and the Mo4-Fe5C2 exhibits heightened selectivity for NRR, minimizing interference from the hydrogen evolution reaction (HER). This enhanced performance is attributed to the unique structure and interactive dynamics of Mon-Fe5C2 and the electron orbital interactions facilitating direct nitrogen charge transfer. Our findings underscore the potential of Mo cluster-modified Fe5C2 as a pioneering catalyst for electrocatalytic nitrogen reduction.

One-dimensional biomass-based carbon nanotubes loaded with MoS2 as catalysts for the electrocatalytic nitrogen reduction reaction

In recent years, electrochemical conversion of nitrogen to ammonia at low temperature and atmospheric pressure has become a hot research topic because of its advantages of low carbon emission, low energy consumption and high energy transfer rate. The development of catalysts with high catalytic activity and flexibility are an important topic in the current nitrogen reduction reaction. In this paper, CNT@MoS2 composite catalysts were prepared by catalytic pyrolysis of biomass to prepare one-dimensional carbon nanotubes and then combined with MoS2 by a hydro thermal method. It was found that 120 CNT@MoS2 had better NRR activity and selectivity, NH3 yield rate of 21.2 μg h−1 mg−1 was achieved at −0.44 V vs. The Faraday efficiency can reach 5.4%. The catalytic performance is more than 3 times higher than CNT. The mechanism of MoS2-catalyzed NRR was further investigated by DFT theoretical calculations. The results of the theoretical calculations are in good agreement with the experimental results, providing a reasonable explanation for the high reduction performance of the catalyst. This study offered a promising avenue for exploring and rationalizing the design of electrocatalytic materials for NRR.

Advancements in Electrocatalytic Nitrogen Reduction: A Comprehensive Review of Single-Atom Catalysts for Sustainable Ammonia Synthesis.

Electrocatalytic nitrogen reduction technology seamlessly aligns with the principles of environmentally friendly chemical production. In this paper, a comprehensive review of recent advancements in electrocatalytic NH3 synthesis utilizing single-atom catalysts (SACs) is offered. Into the research and applications of three categories of SACs: noble metals (Ru, Au, Rh, Ag), transition metals (Fe, Mo, Cr, Co, Sn, Y, Nb), and nonmetallic catalysts (B) in the context of electrocatalytic ammonia synthesis is delved. In-depth insights into the material preparation methods, single-atom coordination patterns, and the characteristics of the nitrogen reduction reaction (NRR) are provided. The systematic comparison of the nitrogen reduction capabilities of various SAC types offers a comprehensive research framework for their integration into electrocatalytic NRR. Additionally, the challenges, potential solutions, and future prospects of incorporating SACs into electrocatalytic nitrogen reduction endeavors are discussed.

Screening of borophene-supported highly active and selective single-atom catalysts for electrocatalytic nitrogen reduction reactions

Ammonia (NH3) is an ideal zero-carbon clean energy source because of its substantial hydrogen capacity, high-energy density and facile transportability. Compared to disadvantages of Haber–Bosch processes, such as demanding reaction conditions, high energy consumption and inefficiency, the electrocatalysis nitrogen reduction reaction (NRR) can achieve green synthesis of NH3 due to mild reactive conditions. Utilizing density functional theory (DFT), explored the potential of borophene-supported transition metals as single atom catalysts (SACs) for NRR. The NRR pathways and Gibbs free-energy (ΔG) of the selected V@Bβ12, Cr@Bβ12, Zr@Bβ12 and Mo@Bβ12 were studied in detail after rigorous screening processes. The limiting potentials of NRR in optimal path are -0.10, -0.27, -0.18 and -0.07 V, respectively, which are excellent catalysts for NRR. Under operating voltage conditions, TM@Bβ12 has excellent ability to resist surface oxidation and inhibit hydrogen evolution reaction (HER). In addition, V@Bβ12, Cr@Bβ12, Zr@Bβ12 and Mo@Bβ12 have good selectivity for NRR. Cr@Bβ12 and Mo@Bβ12 are also potential catalysts for HER. The source of TM@Bβ12 catalytic activity in NRR fully confirms the good conductive properties, and the transmission of the charge contribute to improve catalytical activity of NRR. This paper provides theoretical guidance on the synthesis of a new type of NRR catalyst.