Electrocatalytic Oxygen Evolution Reaction Research Articles

Research progress on electronic and active site engineering of cobalt‐based electrocatalysts for oxygen evolution reaction

AbstractElectrocatalytic water splitting has been identified as a potential candidate for producing clean hydrogen energy with zero carbon emission. However, the sluggish kinetics of oxygen evolution reaction on the anode side of the water‐splitting device significantly hinders its practical applications. Generally, the efficiency of oxygen evolution processes depends greatly on the availability of cost‐effective catalysts with high activity and selectivity. In recent years, extensive theoretical and experimental studies have demonstrated that cobalt (Co)‐based nanomaterials, especially low‐dimensional Co‐based nanomaterials with a huge specific surface area and abundant unsaturated active sites, have emerged as versatile electrocatalysts for oxygen evolution reactions, and thus, great progress has been made in the rational design and synthesis of Co‐based nanomaterials for electrocatalytic oxygen evolution reactions. Considering the remarkable progress in this area, in this timely review, we highlight the most recent developments in Co‐based nanomaterials relating to their dimensional control, defect regulation (conductivity), electronic structure regulation, and so forth. Furthermore, a brief conclusion about recent progress achieved in oxygen evolution on Co‐based nanomaterials, as well as an outlook on future research challenges, is given.

Accurately Modulating Binuclear Metal Nodes of Metal-Organic Frameworks for Oxygen Evolution.

The accurate manipulation of the species and locations of catalytic centers is crucial for regulating the catalytic activity of catalysts, which is essential for their efficient design and development. Metal-organic frameworks (MOFs) with coordinated metal sites are ideal materials for investigating the origin of catalytic activity. In this study, we present a Ni2-MOF featuring novel Ni-based binuclear nodes with open metal sites (OMSs) and saturated metal sites (SMSs). The nickel was replaced by iron to obtain Ni1Fe1-MOF. In the electrocatalytic oxygen evolution reaction, Ni1Fe1-MOF exhibited an overpotential and Tafel slope of 370 mV@10 mA cm-2 and 87.06 mV dec-1, respectively, which were higher than those of Ni2-MOF (283 mV@10 mA cm-2 and 39.59 mV dec-1, respectively), demonstrating the superior performance of Ni1Fe1-MOF. Furthermore, theoretical calculations revealed that iron as an SMS may effectively regulate the electronic structure of the nickel catalytic center to reduce the free energy barrier ΔG*OH of the rate-determining step.

Promoting Oxygen Evolution Electrocatalysis by Coordination Engineering in Cobalt Phosphate.

Understanding the structure-activity correlation is an important prerequisite for the rational design of high-efficiency electrocatalysts at the atomic level. However, the effect of coordination environment on electrocatalytic oxygen evolution reaction (OER) remains enigmatic. In this work, the regulation of proton transfer involved in water oxidation by coordination engineering based on Co3(PO4)2 and CoHPO4 is reported. The HPO4 2- anion has intermediate pKa value between Co(II)-H2O and Co(III)-H2O to be served as an appealing proton-coupled electron transfer (PCET) induction group. From theoretical calculations, the pH-dependent OER properties, deuterium kinetic isotope effects, operando electrochemical impedance spectroscopy (EIS) and Raman studies, the CoHPO4 catalyst beneficially reduces the energy barrier of proton hopping and modulates the formation energy of high-valent Co species, thereby enhancing OER activity. This work demonstrates a promising strategy that involves tuning the local coordination environment to optimize PCET steps and electrocatalytic activities for electrochemical applications. In addition, the designed system offers a motif to understand the structure-efficiency relationship from those amino-acid residue with proton buffer ability in natural photosynthesis.

Bridging OER Electrocatalysis and Tumor Therapy: Utilizing Piezoelectric‐Hole‐Induced OER Electrocatalysis for Direct Oxygen Generation to Address Hypoxia

AbstractIn addressing the challenge of hypoxia within the tumor microenvironment (TME), a significant obstacle to effective cancer therapy, this research introduces a pioneering nanozyme engineered to utilize water and oxygen as reactants. Utilizing ultrasonic piezoelectricity, this nanozyme converts these substrates into oxygen (O2) and reactive oxygen species, thereby amplifying oxidative stress without relying on endogenous H2O2. This approach involves the strategic engineering of porous ZnSnOv:Mn nanosheets (named MZSO NSs), which are distinguished by oxygen‐rich vacancies and enhanced piezoelectric properties. This breakthrough represents the initial attempt to merge catalytic activities akin to catalase (CAT) with the electrocatalytic oxygen evolution reaction (OER), confirmed through both enzymatic reactions and electrochemical voltammetric analysis. The predominant mechanism of ultrasound‐augmented oxygen generation in MZSO is identified as piezoelectric hole‐induced OER. Supporting theoretical analyses clarify the synergistic impact of oxygen vacancies and Mn doping on the dynamics of carriers and the OER process, leading to a notable increase in catalytic efficiency. These findings highlight the potential of piezoelectric‐enhanced OER electrocatalysts to alleviate hypoxia in the TME, providing novel insights into the development of piezoelectric acoustic sensitizers for the treatment of cancer.

Organic-inorganic hybrid interfaces with π-d electron coupling for preventing metal and sulfur leaching toward enhanced oxygen evolution reaction

Transition metal sulfides (TMSs) catalysts with high catalytic oxygen evolution reaction (OER) activity have been extensively studied, especially Fe and Co-based sulfides. Fe and Co active sites with a strong synergistic effect, which can adjust the electron density distribution and effectively improve the electrocatalytic OER activity. However, TMSs has poor stability in alkaline environment caused by metal ions and sulfur elements are facilitated to dissolve. In this work, TMSs was modified by polyaniline (PANI) to inhibit the precipitation of iron, cobalt, and sulfur elements and enhance its stability under alkaline conditions. Moreover, π-d structure can also be formed by the coating of polyaniline, which can further adjust its own electronic structure on the basis of stabilizing the TMSs structure, so as to improve the electrochemical performance, rendering them to stably operate at harsh environment for more than 90 h. These findings offer new guidance for improving the electrocatalytic stability of TMSs.

Ligand-Induced Electronic Structure Modulation of Self-Evolved Ni3S2 Nanosheets for the Electrocatalytic Oxygen Evolution Reaction.

Modulating the electronic structure of the electrocatalyst plays a vital role in boosting the electrocatalytic performance of the oxygen evolution reaction (OER). In this work, we introduced a one-step solvothermal method to fabricate 1,1-ferrocene dicarboxylic acid (FcDA)-decorated self-evolved nickel sulfide (Ni3S2) nanosheet arrays on a nickel foam (NF) framework (denoted as FcDA-Ni3S2/NF). Benefiting from the interconnected ultrathin nanosheet architecture, ligand dopants induced and facilitated in situ structural reconstruction, and the FcDA-decorated Ni3S2 (FcDA-Ni3S2/NF) outperformed its singly doped and undoped counterparts in terms of OER activity. The optimized FcDA-Ni3S2/NF self-supported electrode presents a remarkably low overpotential of 268 mV to achieve a current density of 10 mA cm-2 for the OER and demonstrates robust electrochemical stability for 48 h in a 1.0 M KOH electrolyte. More importantly, in situ electrochemical Raman spectroscopy reveals the generation of catalytically active oxyhydroxide species (NiOOH) derived from the surface construction during the OER of pristine FcDA-Ni3S2/NF, contributing significantly to its superior electrocatalytic performance. This study concerns the modulation of electronic structure through ligand engineering and may provide profound insight into the design of cost-efficient OER electrocatalysts.

Constructing a potential electrocatalyst: highly multi-porous Co3O4 nanostructures to enhance electrocatalytic oxygen evolution reactions

Constructing a potential electrocatalyst: highly multi-porous Co3O4 nanostructures to enhance electrocatalytic oxygen evolution reactions

Self-Assembled Conjugated Coordination Polymer Nanorings: Role of Morphology and Redox Sites for the Alkaline Electrocatalytic Oxygen Evolution Reaction.

Electrocatalytic water splitting provides a sustainable method for storing intermittent energies, such as solar energy and wind, in the form of hydrogen fuel. However, the oxygen evolution reaction (OER), constituting the other half-cell reaction, is often considered the bottleneck in overall water splitting due to its slow kinetics. Therefore, it is crucial to develop efficient, cost-effective, and robust OER catalysts to enhance the water-splitting process. Transition-metal-based coordination polymers (CPs) serve as promising electrocatalysts due to their diverse chemical architectures paired with redox-active metal centers. Despite their potential, the rational use of CPs has faced obstacles including a lack of insights into their catalytic mechanisms, low conductivity, and morphology issues. Consequently, achieving success in this field requires the rational design of ligands and topological networks with the desired electronic structure. This study delves into the design and synthesis of three novel conjugated coordination polymers (CCPs) by leveraging the full conjugation of terpyridine-attached flexible tetraphenylethylene units as electron-rich linkers with various redox-active metal centers [Co(II), Ni(II), and Zn(II)]. The self-assembly process is tuned for each CCP, resulting in two distinct morphologies: nanosheets and nanorings. The electrocatalytic OER performance efficiency is then correlated with factors such as the nanostructure morphology and redox-active metal centers in alkaline electrolytes. Notably, among the three morphologies studied, nanorings for each CCP exhibit a superior OER activity. Co(II)-integrated CCPs demonstrate a higher activity between the redox-active metal centers. Specifically, the Co(II) nanoring morphology displays exceptional catalytic activity for OER, with a lower overpotential of 347 mV at a current density of 10 mA cm-2 and small Tafel slopes of 115 mV dec-1. The long-term durability is demonstrated for at least 24 h at 1.57 V vs RHE during water splitting. This is presumably the first proof that links the importance of nanostructure morphologies to redox-active metal centers in improving the OER activity, and it may have implications for other transdisciplinary energy-related applications.

Dealloying of Mg-based alloys for production of self-supporting metallic nanostructures

Dealloying is a proficient technique in the fabrication of nanostructured metals, particularly nanoporous materials, with promising potential for diverse applications. However, the development of robust and self-standing nanostructured metal foils through dealloying presents significant challenges. By generating an alloy layer on the surface of the metal foil, nanostructures can be generated on the metal foil surface through subsequent dealloying. This approach utilizes the inherent flexibility and ductility of the metal foil to ensure self-support. It also allows for the tailoring of the structure and composition of the dealloyed nanostructured metal by manipulation of the phase constitution in the surface alloy layer. In this study, we report a strategy for generating alloy layers on metal foil surfaces through the thermal evaporation of magnesium (Mg) followed by annealing. Upon dealloying the surface alloy layer, we successfully obtain self-supported nanostructured metal foils. Employing copper (Cu) as an example, we demonstrate that Mg can form a Mg–Cu alloy layer on the surface of a Cu foil, where the control over the alloy layer's phase composition and thickness is achieved by adjusting the annealing duration. Furthermore, we investigated the feasibility of this method on nickel (Ni) substrates, including Ni foils and Ni foams. Moreover, by further functionalizing the resulting nanostructured Ni foil, we transformed it into Ni(OH)2/Ni foil and explored its performance in the electrocatalytic oxygen evolution reaction (OER). The resulting catalyst achieved a current density of 10 mA cm−2 at a potential of only 349 mV in a 1 M KOH solution, exhibiting a Tafel slope of 84.52 mV dec−1. Following 10 h of stability testing, the catalyst exhibited negligible degradation in performance. This study provides a convenient and versatile pathway for preparing self-supported nanostructured metals.

WC nanoparticles and NiFe alloy co-encapsulated in N-doped carbon nanocage for exceptional OER and ORR bifunctional electrocatalysis

Developing earth-abundant electrocatalysts with optimized intrinsic active sites is crucial for enhancing bifunctional oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) performance. In this study, we fabricated a hollow structured carbon framework utilizing NiFe Prussian Blue analogs (PBAs) as templates, while polypyrrole (PPy) and phosphotungstic acid (PW12). Pyrrole monomer underwent polymerization on the nanocubic PBA surface in the presence of PW12 (PBA@PPy-PW12). Subsequent carbothermal reduction created an N-doped carbon shell with embedded NiFe alloy and tungsten carbide (WC) nanoparticles. The polymeric PPy-PW12 nature can not only prevent the aggregation of PBA and WC structures but also enhance electrical conductivity by connecting neighboring nanospheres. Moreover, the introduction of WC can significantly enhance the bifunctional electrocatalytic activity of the carbon-based catalyst, which is attributed to synergism between the WC and NiFe materials within the NC layer. Consequently, NiFe/W0.3C@NC exhibited outstanding OER (overpotential = 290 mV for 10 mA/cm2; Tafel slope = 57 mV/dec) and ORR (half wave potential = 0.81 V; Tafel slope = 61 mV/dec) performances. This work presents a promising avenue for developing high-performance electrocatalysts for energy conversion systems that showcase remarkable efficiency, stability, and potential practicability.

Intercalated and Surface-Adsorbed Phosphate Anions in NiFe Layered Double-Hydroxide Catalysts Synergistically Enhancing Oxygen Evolution Reaction Activity.

The oxygen evolution reaction (OER), a crucial semireaction in water electrolysis and rechargeable metal-air batteries, is vital for carbon neutrality. Hindered by a slow proton-coupled electron transfer, an efficient catalyst activating the formation of an O-H bond is essential. Here, we proposed a straightforward one-step hydrothermal procedure for fabricating PO43--modified NiFe layered double-hydroxide (NiFe LDH) catalysts and investigated the role of PO43- anions in enhancing OER. Phosphate amounts can efficiently regulate LDH morphology, crystallinity, composition, and electronic configuration. The optimized sample showed a low overpotential of 267 mV at 10 mA cm-2. Density functional theory calculations revealed that intercalated and surface-adsorbed PO43- anions in NiFe LDH reduced the Gibbs free energy in the rate-determining step of *OOH formation, balancing oxygen-containing intermediate adsorption/dissociation and promoting the OER. Intercalated phosphate ions accelerated precatalyst dehydrogenation kinetics, leading to a rapid reconstruction into active NiFe oxyhydroxide species. Surface-adsorbed PO43- interacted favorably with adsorbed *OOH on the active Ni sites, stabilizing *OOH. Overall, the synergistic effects of intercalated and surface-adsorbed PO43- anions significantly contributed to enhanced OER activity. Achieving optimal catalytic activity requires a delicate equilibrium between thermodynamic and kinetic factors by meticulously regulating the quantity of introduced PO43- ions. This endeavor will facilitate a deeper comprehension of the influence of anions in electrocatalysis for OER.

Viologen-Cucurbit[7]uril Based Polyrotaxanated Covalent Organic Networks: A Metal Free Electrocatalyst for Oxygen Evolution Reaction.

Viologen-based covalent organic networks represent a burgeoning class of materials distinguished by their captivating properties. Here, supramolecular chemistry is harnessed to fabricate polyrotaxanated ionic covalent organic polymers (iCOP) through a Schiff-base condensation reaction under solvothermal conditions. The reaction between 1,1'-bis(4-aminophenyl)-[4,4'-bipyridine]-1,1'-diium dichloride (DPV-NH2) and 1,3,5-triformylphloroglucinol (TPG) in various solvents yields an iCOP-1 and iCOP-2. Likewise, employing cucurbit[7]uril (CB[7]) in the reaction yielded polyrotaxanated iCOPs, denoted as iCOP-CB[7]-1 and iCOP-CB[7]-2. All four iCOPs exhibit exceptional stability under the acidic and basic conditions. iCOP-CB[7]-2 displays outstanding electrocatalytic Oxygen Evolution Reaction (OER) performance, demanding an overpotential of 296 and 332mV at 10 and 20mA cm-2, respectively. Moreover, the CB[7] integrated iCOP-2 exhibits a long-term stable nature for 30h in 1m KOH environment. Further, intrinsic activity studies like TOF show a 4.2-fold increase in generation of oxygen (O2) molecules than the bare iCOP-2. Also, it is found that iCOP-CB[7]-2 exhibits a high specific (19.48mA cm-2) and mass activity (76.74mAmg-1) at 1.59V versus RHE. Operando-EIS study evident that iCOP-CB[7]-2 commences OER at a relatively low applied potential of 1.5V versus RHE. These findings pave the way for a novel approach to synthesizing various mechanically interlocked molecules through straightforward solvothermal conditions.

Large-Scale and Simple Synthesis of NiFe(OH)x Electrode Derived from Raney Ni Precursor for Efficient Alkaline Water Electrolyzer

Water electrolysis is a crucial technology in the production of hydrogen energy. Due to the escalating industrial demand for green hydrogen, the required electrode size for a traditional alkaline water electrolyzer has been increasing. Numerous studies have focused on developing highly active oxygen evolution reaction (OER) catalysts for water electrolysis. However, there remains a significant gap between the microscale synthesis of catalysts in laboratory settings and the macroscale preparation required for industrial scenarios. This challenge is particularly pronounced in the synthesis of sizable self-supported electrodes. In this work, we employed a commercially available Raney Ni-coated Ni mesh as a precursor material to fabricate a self-supported NiFe(OH)x@Raney Ni anode with a substantial dimension exceeding 300 mm through a straightforward immersion technique. The as-prepared electrode exhibited remarkable electrocatalytic OER activity, as an overpotential of only 240 mV is required to achieve 10 mA cm−2. This performance is comparable to that of NiFe-LDHs synthesized via a hydrothermal method, which is difficult to scale up for industrial applications. Furthermore, the electrode demonstrated exceptional durability, maintaining stable operation for over 100 h at a current density of 500 mA cm−2. The large-scale electrode displayed consistent overpotentials across various areas, indicating uniform catalytic activity. When integrated into an alkaline water electrolysis device, it delivered an average cell voltage of 1.80 V at 200 mA cm−2 and achieved a direct current hydrogen production energy consumption as low as 4.3 kWh/Nm3. These findings underline the suitability of electrodes for industrial scale applications, offering a promising alternative for energy-efficient hydrogen production.

Self-supported low-crystallinity CoFe layered double hydroxide nanospheres on monolayer Ti3C2 electrode for oxygen evolution reaction

The electrocatalytic oxygen evolution reaction is a crucial means to support the conversion and storage of the sustainable renewable energy. Low-crystallinity can offer short-range structural ordering and high active site density. In this work, an efficient self-supported oxygen evolution reaction (OER) electrocatalyst, cobalt iron layered double hydroxide (LDH) grown on Ti3C2 modified nickel foam (NF) heterostructure anode (CoFe-LDH/Ti3C2/NF) was prepared using electrodeposition. The exceptional electrocatalytic OER performance is ensured by in situ decorating monolayer Ti3C2/NF (s-Ti3C2/NF) with low-crystallinity CoFe nanospheres. By harnessing the low crystallinity, well-chosen composition and reasonable heterostructure, the overpotential of CoFe-LDH/Ti3C2/NF decreases to 246 mV at a current density of 10 mA·cm−2 in alkaline media. After 3000 cyclic voltammograms cycles, the ignorable increase in overpotential of 14 mV suggest the excellent long circular stability. Moreover, an accelerated reaction kinetics is implied by the smaller Tafel slope (28.76 mV·dec−1) and higher double-layer specific capacitance (2.33 mF·cm−2), which surpassed the counterparts CoFe-LDH grown on NF (CoFe-LDH/NF) and s-Ti3C2/NF. This work paves a new way to fabricate the low-crystallinity materials for electrocatalysis and energy storage.

Highly Stable Mo-NiO@NiFe-Layered Double Hydroxide Heterojunction Anode Catalyst for Alkaline Electrolyzers with Porous Membrane.

Heterostructure catalysts are considered as promising candidates for promoting the oxygen evolution reaction (OER) process due to their strong electron coupling. However, the inevitable dissolution and detachment of the heterostructure catalysts are caused by the severe reconstruction, dramatically limiting their industrial application. Herein, the NiFe-layered double hydroxide (LDH) nanosheets attached on Mo-NiO microrods (Mo-NiO@NiFe LDH) by the preoxidation strategy of the core NiMoN layer are synthesized for ensuring the high catalytic performance and stability. Owing to the enhanced electron coupling and preoxidation process, the obtained Mo-NiO@NiFe LDH exhibits a superlow overpotential of 253 mV to achieve a practically relevant current density of 1000 mA cm-2 for OER with exceptional stability over 1200 h. Notably, the overall water splitting system based on Mo-NiO@NiFe LDH reveals remarkable stability, maintaining the catalytic activity at a current density of 1000 mA cm-2 for 140 h under industrial harsh conditions. Furthermore, the Mo-NiO@NiFe LDH demonstrates outstanding activity and long-term durability in a practical alkaline electrolyzer assembly with a porous membrane, even surpassing the performance of IrO2. This work provides a new sight for designing and synthesizing highly stable heterojunction electrocatalysts, further promoting and realizing the industrial electrocatalytic OER.

Highly efficient anion exchange membrane water electrolyzers via chromium-doped amorphous electrocatalysts

In-depth comprehension and modulation of the electronic structure of the active metal sites is crucial to enhance their intrinsic activity of electrocatalytic oxygen evolution reaction (OER) toward anion exchange membrane water electrolyzers (AEMWEs). Here, we elaborate a series of amorphous metal oxide catalysts (FeCrOx, CoCrOx and NiCrOx) with high performance AEMWEs by high-valent chromium dopant. We discover that the positive effect of the transition from low to high valence of the Co site on the adsorption energy of the intermediate and the lower oxidation barrier is the key factor for its increased activity by synchrotron radiation in-situ techniques. Particularly, the CoCrOx anode catalyst achieves the high current density of 1.5 A cm−2 at 2.1 V and maintains for over 120 h with attenuation less than 4.9 mV h−1 in AEMWE testing. Such exceptional performance demonstrates a promising prospect for industrial application and providing general guidelines for the design of high-efficiency AEMWEs systems.

Unveiling the Potential of Covalent Organic Framework Electrocatalyst for Enhanced Oxygen Evolution.

The potential for sustainable energy and carbon neutrality has expanded with the development of a highly active electrocatalyst for the oxygen evolution reaction (OER). Covalent Organic Frameworks (COF) have recently garnered attention because of their enormous potential in a number of cutting-edge application sectors, such as gas storage, sensors, fuel cells, and active catalytic supports. A simple and effective COF constructed and integrated by post-alteration plasma modification facilitates high electrocatalytic OER activity under alkaline conditions. Variations in parameters such as voltage and treatment duration have been employed to enhance the factor that demonstrates high OER performance. The overpotential and Tafel slope are the lowest of all when using an optimized parameter, such as plasma treatment for 30 min utilizing 6 kV of voltage, PT-30 COF, measuring 390 mV at a current density of 10 mA.cm-2 and 69 mV.dec-1, respectively, as compared to 652 mV and 235 mV.dec-1 for the Pristine-COF. Our findings provide a method for broadening the scope by post-functionalizing the parent framework for effective water splitting.

Electron regulation of CeO2 on CoP multi-shell hetero-junction micro-sphere towards highly efficient water oxidation

CeO2 has been identified as a significant cocatalyst to enhance the electrocatalytic activity of transition metal phosphides (TMPs). However, the electrocatalytic mechanism by which CeO2 enhances the catalytic activity of TMP remains unclear. In this study, we have successfully developed a unique CeO2-CoP-1–4 multishell microsphere heterostructure catalyst through a simple hydrothermal and calcination process. CeO2-CoP-1–4 exhibits great potential for electrocatalytic oxygen evolution reaction (OER), requiring only an overpotential of 254 mV to achieve a current density of 10 mA cm−2. Moreover, CeO2-CoP-1–4 demonstrates excellent operating durability lasting for 55 h. The presence of CeO2 as a cocatalyst can regulate the microsphere structure of CoP, the resulting multishell microsphere structure can shorten the mass transfer distance, and improve the utilization rate of the active site. Furthermore, in situ Raman and ex situ characterizations, and DFT theoretical calculation results reveal that CeO2 can effectively regulates the electronic structure of Co species, reduces the reaction free energy of rate-limiting step, thus increase the reaction kinetic. Overall, this study provides experimental and theoretical evidence to better comprehend the mechanism and structure evolution of CeO2 in enhancing the OER performance of CoP, offering a unique design inspiration for the development of efficient hollow heterojunction electrocatalysts.

In-Situ Nanoarchitectonics of Fe/Co LDH over Cobalt-Enriched N-Doped Carbon Cookies as Facile Oxygen Redox Electrocatalysts for High-Rate Rechargeable Zinc-Air Batteries.

The reality of long-term rechargeable and high-performance zinc-air batteries relies majorly on cost-effective and eminent bifunctional electrocatalysts, which can perform both the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER). Herein, we demonstrate a new approach for the synthesis of in-situ-grown layered double hydroxide of iron and cobalt over a cobalt nanoparticle-enriched nitrogen-doped carbon frame (CoL 2:1) by a simple coprecipitation reaction with facile scale-up and explore its electrocatalytic ORR and OER activity for an electrically rechargeable zinc-air battery. Consequently, the developed composite displays excellent ORR and OER activity with an ORR half-wave potential of 0.84 V, a limiting current density of 5.85 mA/cm2, and an OER overpotential of 320 mV with exceptional stability. The outstanding bifunctionality index of the catalyst (ΔE = 0.72 V) inspired us to utilize it as a cathode catalyst in an in-house developed prototype zinc-air battery. The battery could easily supply a specific capacity of 804 mAh/g with a maximum peak power density of 161 mW/cm2. The battery exhibits an attractive charge-discharge profile with a lesser voltage gap of 0.76 V at 10 mA/cm2 with durability for a period of 200 h and a voltage efficiency of 97%, which surpassed the corresponding Pt/C + RuO2-based zinc-air battery. Further, a maximum load of 50 mA/cm2 could easily be sustained during cycling, revealing its outstanding stability. A series-connected two CoL 2:1-based zinc-air batteries effortlessly enlighten a pinwheel fan and LED panel simultaneously, revealing its practicality. The high electrical conductivity and greater specific surface area of Co/N-C and its robust attachment with Fe/Co LDH preserves both active sites, thereby resulting in exceptional performance. Our method is capable of being flexible enough to create various bifunctional Co/N-C-based composite electrodes, opening up a feasible pathway to rechargeable zinc-air batteries with maximum energy density.

Crystal Structure Regulation of CoSe2 Induced by Fe Dopant for Promoted Surface Reconstitution toward Energetic Oxygen Evolution Reaction.

Most nonoxide catalysts based on transition metal elements will inevitably change their primitive phases under anodic oxidation conditions in alkaline media. Establishing a relationship between the bulk phase and surface evolution is imperative to reveal the intrinsic catalytic active sites. In this work, it is demonstrated that the introduction of Fe facilitates the phase transition of orthorhombic CoSe2 into its cubic counterpart and then accelerates the Co-Fe hydroxide layer generation on the surface during electrocatalytic oxygen evolution reaction (OER). As a result, the Fe-doped cubic CoSe2 catalyst exhibits a significantly enhanced activity with a considerable overpotential decrease of 79.9 and 66.9 mV to deliver 10 mA·cm-2 accompanied by a Tafel slope of 48.0 mV·dec-1 toward OER when compared to orthorhombic CoSe2 and Fe-doped orthorhombic CoSe2, respectively. Density functional theory (DFT) calculations reveal that the introduction of Fe on the surface hydroxide layers will tune electron density around Co atoms and raise the d-band center. These findings will provide deep insights into the surface reconstitution of the OER electrocatalysts based on transition metal elements.