Electrocatalytic Activity For Oxygen Evolution Reaction Research Articles

Incorporation of Ag in Co9S8-Ni3S2 for Predominantly Enhanced Electrocatalytic Activities for Oxygen Evolution Reaction: A Combined Experimental and DFT Study.

Electrodeposition of abundant metals to fabricate efficient and durable electrodes play a viable role in advancing renewable electrochemical energy technologies. Herein, we deposit Co9S8-Ag-Ni3S2@NF onto nickel foam (NF) to form Co9S8-Ag-Ni3S2@NF as a highly efficient electrode for oxygen evolution reaction (OER). The electrochemical investigation verifies that the Co9S8-Ag-Ni3S2@NF electrode exhibits superior electrocatalytic activity toward OER because of its nanoflowers' open-pore morphology, reduced overpotential (η10 = 125 mV), smaller charge transfer resistance, long-term stability, and a synergistic effect between various components, which allows the reactants to be more easily absorbed and subsequently converted into gaseous products during the water electrolysis process. DFT calculation also reveals that the introduction of Ag (222) surface into the Co9S8 (440)-Ni3S2 (120) system increases the electronic density of states per unit cell of a system and significantly reduces the energy barriers of intermediates for OER, leading to enhanced electrocatalytic activity for OER. This study showcases the innovation of employing trimetallic nanomaterials immobilized on a conductive, continuous porous three-dimensional network formed on a nickel foam (NF) substrate as a highly efficient catalyst for OER.

Organic-inorganic hybrid interfaces with π-d electron coupling for preventing metal and sulfur leaching toward enhanced oxygen evolution reaction

Transition metal sulfides (TMSs) catalysts with high catalytic oxygen evolution reaction (OER) activity have been extensively studied, especially Fe and Co-based sulfides. Fe and Co active sites with a strong synergistic effect, which can adjust the electron density distribution and effectively improve the electrocatalytic OER activity. However, TMSs has poor stability in alkaline environment caused by metal ions and sulfur elements are facilitated to dissolve. In this work, TMSs was modified by polyaniline (PANI) to inhibit the precipitation of iron, cobalt, and sulfur elements and enhance its stability under alkaline conditions. Moreover, π-d structure can also be formed by the coating of polyaniline, which can further adjust its own electronic structure on the basis of stabilizing the TMSs structure, so as to improve the electrochemical performance, rendering them to stably operate at harsh environment for more than 90 h. These findings offer new guidance for improving the electrocatalytic stability of TMSs.

Hierarchical-hollow architecture NiSe2 nanosheets for overall water splitting

Electrolytic water splitting (EWS), regarded as a sustainable and promising strategy for hydrogen production, has received huge attention in recent years. However, the practical application of EWS is greatly hindered by the sluggish kinetics of the oxygen evolution reaction (OER). Herein, we proposed an efficient strategy for the synthesis of hierarchical hollow nickel selenide with significant HER and OER electrocatalytic activity. The as-synthesized NiSe2 possesses low overpotential of ∼85 mV at the current density of 10 mA/cm2 for the HER in 0.5 M H2SO4 and ∼270 mV for OER in 1 M KOH. Importantly, when employed into full water splitting on membrane electrode assembly, it merely requires an ultralow voltage of 1.73 V to achieve the current density of 1 A/cm2, outperforming most of the reported other Ni/Ni-Se based structures. Density Functional Theory (DFT) simulations confirm that the hierarchical hollow NiSe2 structure facilitates the reduction of the Gibbs free energy change of H- and O-containing intermediates in the HER/OER process, which promotes the formation of intermediates and thus accelerates the catalytic kinetics. This work offers an important structure engineering route to develop high catalytic performance materials and sheds light on the promotion of electrocatalytic activity for clean energy utilization.

Large-Scale and Simple Synthesis of NiFe(OH)x Electrode Derived from Raney Ni Precursor for Efficient Alkaline Water Electrolyzer

Water electrolysis is a crucial technology in the production of hydrogen energy. Due to the escalating industrial demand for green hydrogen, the required electrode size for a traditional alkaline water electrolyzer has been increasing. Numerous studies have focused on developing highly active oxygen evolution reaction (OER) catalysts for water electrolysis. However, there remains a significant gap between the microscale synthesis of catalysts in laboratory settings and the macroscale preparation required for industrial scenarios. This challenge is particularly pronounced in the synthesis of sizable self-supported electrodes. In this work, we employed a commercially available Raney Ni-coated Ni mesh as a precursor material to fabricate a self-supported NiFe(OH)x@Raney Ni anode with a substantial dimension exceeding 300 mm through a straightforward immersion technique. The as-prepared electrode exhibited remarkable electrocatalytic OER activity, as an overpotential of only 240 mV is required to achieve 10 mA cm−2. This performance is comparable to that of NiFe-LDHs synthesized via a hydrothermal method, which is difficult to scale up for industrial applications. Furthermore, the electrode demonstrated exceptional durability, maintaining stable operation for over 100 h at a current density of 500 mA cm−2. The large-scale electrode displayed consistent overpotentials across various areas, indicating uniform catalytic activity. When integrated into an alkaline water electrolysis device, it delivered an average cell voltage of 1.80 V at 200 mA cm−2 and achieved a direct current hydrogen production energy consumption as low as 4.3 kWh/Nm3. These findings underline the suitability of electrodes for industrial scale applications, offering a promising alternative for energy-efficient hydrogen production.

Unveiling the Potential of Covalent Organic Framework Electrocatalyst for Enhanced Oxygen Evolution.

The potential for sustainable energy and carbon neutrality has expanded with the development of a highly active electrocatalyst for the oxygen evolution reaction (OER). Covalent Organic Frameworks (COF) have recently garnered attention because of their enormous potential in a number of cutting-edge application sectors, such as gas storage, sensors, fuel cells, and active catalytic supports. A simple and effective COF constructed and integrated by post-alteration plasma modification facilitates high electrocatalytic OER activity under alkaline conditions. Variations in parameters such as voltage and treatment duration have been employed to enhance the factor that demonstrates high OER performance. The overpotential and Tafel slope are the lowest of all when using an optimized parameter, such as plasma treatment for 30 min utilizing 6 kV of voltage, PT-30 COF, measuring 390 mV at a current density of 10 mA.cm-2 and 69 mV.dec-1, respectively, as compared to 652 mV and 235 mV.dec-1 for the Pristine-COF. Our findings provide a method for broadening the scope by post-functionalizing the parent framework for effective water splitting.

In-Situ Nanoarchitectonics of Fe/Co LDH over Cobalt-Enriched N-Doped Carbon Cookies as Facile Oxygen Redox Electrocatalysts for High-Rate Rechargeable Zinc-Air Batteries.

The reality of long-term rechargeable and high-performance zinc-air batteries relies majorly on cost-effective and eminent bifunctional electrocatalysts, which can perform both the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER). Herein, we demonstrate a new approach for the synthesis of in-situ-grown layered double hydroxide of iron and cobalt over a cobalt nanoparticle-enriched nitrogen-doped carbon frame (CoL 2:1) by a simple coprecipitation reaction with facile scale-up and explore its electrocatalytic ORR and OER activity for an electrically rechargeable zinc-air battery. Consequently, the developed composite displays excellent ORR and OER activity with an ORR half-wave potential of 0.84 V, a limiting current density of 5.85 mA/cm2, and an OER overpotential of 320 mV with exceptional stability. The outstanding bifunctionality index of the catalyst (ΔE = 0.72 V) inspired us to utilize it as a cathode catalyst in an in-house developed prototype zinc-air battery. The battery could easily supply a specific capacity of 804 mAh/g with a maximum peak power density of 161 mW/cm2. The battery exhibits an attractive charge-discharge profile with a lesser voltage gap of 0.76 V at 10 mA/cm2 with durability for a period of 200 h and a voltage efficiency of 97%, which surpassed the corresponding Pt/C + RuO2-based zinc-air battery. Further, a maximum load of 50 mA/cm2 could easily be sustained during cycling, revealing its outstanding stability. A series-connected two CoL 2:1-based zinc-air batteries effortlessly enlighten a pinwheel fan and LED panel simultaneously, revealing its practicality. The high electrical conductivity and greater specific surface area of Co/N-C and its robust attachment with Fe/Co LDH preserves both active sites, thereby resulting in exceptional performance. Our method is capable of being flexible enough to create various bifunctional Co/N-C-based composite electrodes, opening up a feasible pathway to rechargeable zinc-air batteries with maximum energy density.

The formation of unsaturated IrOx in SrIrO3 by cobalt-doping for acidic oxygen evolution reaction

Electrocatalytic water splitting is a promising route for sustainable hydrogen production. However, the high overpotential of the anodic oxygen evolution reaction poses significant challenge. SrIrO3-based perovskite-type catalysts have shown great potential for acidic oxygen evolution reaction, but the origins of their high activity are still unclear. Herein, we develop a Co-doped SrIrO3 system to enhance oxygen evolution reaction activity and elucidate the origin of catalytic activity. In situ experiments reveal Co activates surface lattice oxygen, rapidly exposing IrOx active sites, while bulk Co doping optimizes the adsorbate binding energy of IrOx. The Co-doped SrIrO3 demonstrates high oxygen evolution reaction electrocatalytic activity, markedly surpassing the commercial IrO2 catalysts in both conventional electrolyzer and proton exchange membrane water electrolyzer.

CoP nanoparticles embedded in N-doped carbon for highly efficient oxygen evolution reaction electrocatalysis

Development of high-activity and low-cost electrocatalysts is significant to enhance the low-kinetic process of oxygen evolution reaction (OER). In this paper, we utilized the self-assembly between melamine, phytic acid and cobalt ions to obtain two-dimensional Co-MPA. Subsequently, in situ phosphating of cobalt ions to obtain CoP/N-CNT was achieved by the pyrolytic of Co-MPA. The small size of CoP (∼18 nm) and the N-doped carbon material endowed CoP/N-CNT with excellent OER electrocatalytic activity, which delivered an overpotential of 330 mV to drive a current density of 10 mA cm−2. Moreover, the TOF value of CoP/N-CNT catalyst is 4.6 times higher than the commercial RuO2 catalyst (at the overpotential of 480 mV), providing it as a promising electrocatalyst for OER.

A comparative study on the electrocatalytic OER activity of mesoporous high-entropy oxide and medium-entropy oxide nanoparticles through SCS method

Developing readily available and cost-effective electrocatalysts as an alternative to the noble metals is a critical issue for renewable hydrogen energy generation. Mesoporous high-entropy oxides (HEOs) are among the most noteworthy candidates in the kinetically challenged process of oxygen evolution reaction (OER); The current study notifies the successful fabrication, and characterization of a series of meso-structured HEOs (5 elements) and MEOs (4 elements) nanopowders with remarkable electrocatalytic performance. Obtained results reveal that the synthesized HEOs and MEOs nanocompounds are meso-structured (with pore size of ⁓43–67 Å) with particle size of ⁓20–30 nm. Combusted HEOs and MEOs powders have high crystallinity degree (derived from XRD analysis) and homogenous elemental distributions. The electrocatalytic activity of the prepared HEOs and MEOs nanopowders were studied using linear sweep voltammetry (LSV), electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) analyses. It was specified that HEO nanoparticles (HEO 0.95 sample) exhibit superior electrocatalytic performance compared to MEOs particles with respect to their overpotential of 310 mV at 10 mA cm−2 and Tafel slope of 53 mV.dec−1. The drop of the charge transfer resistance (RCT) and increase of the conductivity in HEO 0.95 sample contributes to the improved electrocatalytic OER activity of the HEOs nanopowders. Taking ECSA into account, the improved electrocatalytic activity of meso-structured HEO 0.95 sample relates to the large number of active sites in this sample. The XRD, TEM, and FE-SEM results of HEO 0.95 sample after OER analysis indicated no alteration in phase composition and morphology revealing the reusability of the synthesized nanoparticles. This study also provides an insight into the behavior of Co, Ni, Cu elements as typical electrocatalysts as well as Zn and Mg elements as obscure electrocatalysts for efficient OER electrocatalysis. Furthermore, the impact of adiabatic temperature, crystallinity degree and physicochemical features of meso-structured particles on electrocatalytic performance are explored.

Cr dopant regulating d-orbital electronic configuration of NiFe spinel oxide to improve oxygen evolution reaction in Zn-air battery

Significant advancements towards enhancing the catalytic activity of spinel ferrites in oxygen evolution reaction (OER) have been achieved, however, further studies are required on this regard. In this study, Cr-doped spinel ferrite (NiFe2O4) embedded in N-doped C (Cr-NiFe2O4@NC) was synthesized via a high-temperature treatment using an NiFe Prussian blue analog as a precursor and K2Cr2O7 as a Cr source. Owing to the strong octahedral site preference energy, Cr3+ ions were successfully doped into octahedral sites and tailored the electronic configuration of NiFe2O4, as confirmed by XPS. The Cr-substituted Cr-NiFe2O4@NC exhibited the overpotential of 241 mV at 10 mA cm−2, which was smaller than that of NiFe2O4@NC (266 mV) at the same current density. Meanwhile, the Tafel slope of Cr-NiFe2O4@NC (65.32 mV dec−1) was also lower than that of NiFe2O4@NC (86.96 mV dec−1). Therefore, the Cr substitution can improve the electrocatalytic OER performance of NiFe2O4@NC. In particular, an assembled rechargeable Zn-air battery using Cr-NiFe2O4@NC as the cathode catalyst afforded a high power density (61.1 mA cm−2) together with a high specific capacity (740 mA g−1). Amazingly, it could power light-emitting diodes, demonstrating its real-world application. Density functional theory calculations revealed that Cr ion doping led to electron transfer in NiFe2O4, resulting in a density of electronic states close to the Fermi level, which probably regulated the adsorption/desorption behaviors of oxygenate intermediates (*O and *OOH), thus promoting the reaction kinetics of the OER. This study provides a helpful basis for the development of spinel oxides with high electrocatalytic OER activity and durability via cation doping.

Tuning Electrocatalytic Water Oxidation Activity: Insights from the Active-Site Distance in LnCu6 Clusters.

Atomically precise metal clusters serve as a unique model for unraveling the intricate mechanism of the catalytic reaction and exploring the complex relationship between structure and activity. Herein, three series of water-soluble heterometallic clusters LnCu6, abbreviated as LnCu6-AC (Ln = La, Nd, Gd, Er, Yb; HAC = acetic acid), LnCu6-IM (Ln = La and Nd; IM = Imidazole), and LnCu6-IDA (Ln = Nd; H2IDA = Iminodiacetic acid) are presented, each featuring a uniform metallic core stabilized by distinct protected ligands. Crystal structure analysis reveals a triangular prism topology formed by six Cu2+ ions around one Ln3+ ion in LnCu6, with variations in Cu···Cu distances attributed to different ligands. Electrocatalytic oxygen evolution reaction (OER) shows that these different LnCu6 clusters exhibit different OER activities with remarkable turnover frequency of 135s-1 for NdCu6-AC, 79s-1 for NdCu6-IM and 32s-1 for NdCu6-IDA. Structural analysis and Density Functional Theory (DFT) calculations underscore the correlation between shorter Cu···Cu distances and improves OER catalytic activity, emphasizing the pivotal role of active-site distance in regulating electrocatalytic OER activities. These results provide valuable insights into the OER mechanism and contribute to the design of efficient homogeneous OER electrocatalysts.

Ionic liquid in-situ functionalized carbon nanotube film as self-supported metal-free electrocatalysts for oxygen evolution

The oxygen evolution reaction (OER) is a critical cathode reaction for hydrogen production from water splitting. However, due to the sluggish kinetics of OER, the water-splitting process is impeded. Thus, it is imperative to develop efficient and low-cost electrocatalysts that reduce the overpotential and improve the kinetics of OER. Herein, an in-situ synthesis strategy was applied to prepare the ionic liquid functionalized carbon nanotube (IL-CNT) that served as a metal-free electrocatalyst for OER. This powder material exhibited exceptional electrocatalytic activity for OER, with an overpotential of 335 mV at 10 mA cm−2 and a Tafel slope of 71 mV dec-1. Then, it was found that catalytic activity was influenced by the IL anion. Moreover, this IL-CNT powder could self-assemble to form carbon film during preparation, exhibiting outstanding catalytic activity for OER (a low overpotential of 153 mV at 10 mA cm−2), which was highly beneficial for practical application. Based on the theoretical calculations and experimental results, these in-situ functionalization sites on CNT surface played a significant role in regulating their electron structure. This, in turn, promoted electron transfer and hydroxyl adsorption, resulting in a substantial increase in catalytic activity for the OER.

The Electrocatalytic Oxygen Evolution Reaction Activity of Rationally Designed NiFe-Based Glycerates

The electrocatalytic oxygen evolution reaction (OER) is an arduous step in water splitting due to its slow reaction rate and large overpotential. Herein, we synthesized glycerate-anion-intercalated nickel–iron glycerates (NiFeGs) using a one-step solvothermal reaction. We designed various NiFeGs by tuning the molar ratio between Ni and Fe to obtain Ni4Fe1G, Ni3Fe1G, Ni3Fe2G, and Ni1Fe1G, which we tested for their OER performance. We initially analyzed the catalytic performance of powder samples immobilized on glassy carbon electrodes using a binder. Ni3Fe2G outperformed the other NiFeG compositions, including NiFe layered double hydroxide (LDH). It exhibited an overpotential of 320 mV at a current density of 10 mA cm–2 in an electrolytic solution of pH 14. We then synthesized carbon paper (CP)-modified Ni3Fe2G as a self-supported electrode (Ni3Fe2G/CP), and it exhibited a high current density (100 mA cm−2) at a low overpotential of 300 mV. The redox peak analysis for the NiFeGs revealed that the initial step of the OER is the formation of γ-NiOOH, which was further confirmed by a post-Raman analysis. We extensively analyzed the catalyst’s stability and lifetime, the nature of the active sites, and the role of the Fe content to enhance the OER performance. This work may provide the motivation to study metal-alkoxide-based efficient OER electrocatalysts that can be used for alkaline water electrolyzer applications.

Supramolecular Macrocycle Regulated Single‐Atom MoS2@Co Catalysts for Enhanced Oxygen Evolution Reaction

The development of active water oxidation catalysts for water splitting has stimulated considerable interest. Herein, the design and building of single atom Co sites using a supramolecular tailoring strategy are reported, that is, the introduction of pillar[4]arene[1]quinone (P4A1Q) permits mononuclear Co species stereoelectronically assembled on MoS2 matrix to construct an atomically dispersed MoS2@Co catalyst with modulated local electronic structure, definite chemical environment and enhanced oxygen evolution reaction performance. Theoretical calculations indicate that immsobilized single‐Co sites exhibit an optimized adsorption capability of oxygen‐containing intermediates, endowing the catalyst an excellent electrocatalytic oxygen evolution reaction activity, with a low overpotential of 370 mV at 10 mA cm−2 and a small Tafel slope of 90 mV dec−1. The extendable potential of this strategy to other electrocatalysts such as MoS2@Ni and MoS2@Zn, and other applications such as the hydrogen evolution reaction was also demonstrated. This study affords new insights into the rational design of single metal atom systems with enhanced electrocatalytic performance.

Enhanced lanthanum-stabilized low crystallinity metal oxide electrocatalysts with superior activity for oxygen reactions

Oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are key electrochemical reactions for the development of rechargeable Zn-air batteries. However, due to the high cost of commercial noble metal-based catalysts and their limited bifunctionality, it is necessary the design of new electrocatalysts. In this study, stable electrocatalysts have been synthesized through a hydrothermal method and further low-temperature thermal treatment. The materials consist of La stabilized low crystallinity Mn and Co metal (hydro-)oxides. The electrocatalytic performance of these materials has been compared with counterparts calcined at higher temperatures. The findings demonstrate that materials synthesized at lower temperatures and with low crystallinity exhibit superior electrocatalytic activity for both ORR and OER. Moreover, the research highlights the favorable influence of the lanthanum cation, which enhances changes of surface morphology and oxidation states of other cations (Mn and Co). Additionally, the positive contribution of the carbon component to electrochemical activity and electrical conductivity has been elucidated. The best electrocatalyst was studied in a rechargeable Zn-air battery with a durability of up to 120 h. They exhibited better stability and performance than the commercial Pt/C + RuO2 catalyst currently used.

Surface reconstruction of La0.6Sr0.4Co0.8Ni0.2O3-δ perovskite nanofibers for oxygen evolution reaction

Perovskites have become promising alternatives to precious metal-catalyzed oxygen evolution reaction (OER). Herein, we report the synthesis of several perovskite nanofibers, specifically La0.6Sr0.4CoxNi1-xO3-δ (LSCN), and investigate their electrocatalytic water oxidation activity in alkaline electrolytes. La0.6Sr0.4Co0.8Ni0.2O3-δ (LSCN-0.8) is selected and immersed in an aqueous NaBH4 solution for 1 h for surface reconstruction. The perovskite nanofibers' electrocatalytic OER activity and stability are rigorously evaluated using a standard three-electrode system. Results reveal that even a slight Co substitution for Ni content within the LSCN perovskite structure has a notable impact on electrocatalytic activity. Moreover, LSCN-0.8 exhibits an overpotential of 363 mV at 20 mA cm−2 in 1 M KOH. However, significant improvement is observed after the surface reconstruction process. The optimized LSCN-0.8 (now called LSCN-2) displays the lowest OER overpotential (320 mV) under the same conditions. Furthermore, the LSCN-2 nanostructure demonstrates exceptional electrode stability, as evidenced by only a slight decrease in electrocatalytic performance during 5000 cycles of linear sweep voltammetry.

A facile synthesis of hierarchical CoFe2O4 nanosheets for efficient oxygen evolution in neutral medium

It is of great significance to develop electrocatalysts that are abundant in Earth's crust, highly efficient, and exceptionally durable for the oxygen evolution reaction (OER), particularly in neutral medium. Herein, the hierarchical CoFe2O4 nanosheets supported on iron foam (CoFe2O4/IF) were prepared by the ambient spontaneous redox reaction between iron foam and Co2+ at room temperature. The chemical composition and structure of as-prepared CoFe2O4/IF nanosheets were characterized by XRD, XPS, SEM and TEM. The CoFe2O4/IF. The as-obtained CoFe2O4/IF electrode presents excellent electrocatalytic OER activity with an overpotential of 429 mV at 10 mA cm−2 and maintains the stability of 50 h in 1 M PBS. The outstanding electrocatalytic OER activity of CoFe2O4/IF can be credited to the decreased transfer resistance and unique structural features. In addition, the CoFe2O4/IF presented here holds promise for noble-metal-free OER electrocatalyst.

Recent strategies for improving the catalytic activity of ultrathin transition metal sulfide nanosheets toward the oxygen evolution reaction

Hydrogen is considered as one of the clean secondary energy sources required in industry and daily life. Electrocatalytic hydrogen production is believed to be the most reliable method for converting renewable energy into chemical energy. Two-dimensional (2D) transition metal disulfides (TMDs), as an emerging electrocatalysts, have been widely investigated for oxygen evolution reaction (OER) in water splitting. Herein, this review summarizes the recent progress and the strategies of ultrathin TMDs for improving the OER electrocatalytic activities. The basic catalytic mechanism of OER is first introduced, and then the catalytic characteristics of 2D TMDs are presented. Importantly, this review specifically concentrates on strategies to improve catalytic activity such as phase engineering, defect/vacancy engineering, heterostructure, doping effect, and catalyst support material. It can be concluded that these regulatory strategies can largely enhance the electrocatalytic performance by increasing the active site exposure and improving the electrocatalytic kinetics. In addition, the challenges and perspectives of 2D TMDs catalysts are presented, which offers valuable guidance in designing efficient and low-cost OER electrocatalysts for future energy applications. We hope that this review will inspire future studies and bridge the gap between strategy design and practical application.

The oxygen evolution reaction on cobalt atom embedded nitrogen doped graphene electrocatalysts: a density functional theory study.

The oxygen evolution reaction (OER) is essential for the development of renewable energy conversion and storage technologies. Eight N-doped graphenes containing variable numbers of embedded cobalt atoms (Coxy-NG, x = 1-4, y = 1-3, where x represents the number of embedded Co atoms and y represents different configurations) were designed and their OER electrocatalytic activities were systematically studied through density functional theory calculations. The significant roles of the number of Co atoms and their configuration in their OER performance were discussed in detail. Co31-NG occupies the peak of the activity volcano plot with a low overpotential of 0.31 V, which is smaller than Co11-NG with only one Co atom and even superior to the widely used IrO2 (0.56 V). The electronic structure and electron density analysis reveal that the outstanding electrocatalytic performance is due to the orbital hybridization between Co and N atoms and the increased positive charge on in-plane Co due to the out-of-plane Co atoms/clusters. This work clarifies the important role of transition atoms and provides excellent examples for reducing the overpotential through embedding several transition metal atoms onto single-atom electrocatalysts.

A series of isostructural metal-organic frameworks for an enhanced electro-catalytic oxygen evolution reaction.

Three new isostructural MOFs (ZnTIA, CoTIA and CdTIA) were synthesized by the solvothermal synthesis of the organic linker 5-triazole isophthalic acid (5-TIA) with the transition metals Zn(II), Co(II) and Cd(II) in the presence of the structure directing agent tetramethyl ammonium chloride (TMA). These three MOFs were characterized thoroughly by ScXRD, PXRD, FT-IR, TGA, BET and SEM. They have excellent thermal and water stabilities. Among all these MOFs mentioned, pristine CoTIA exhibited excellent electrocatalytic activity toward the oxygen evolution reaction (OER). It exhibits a Tafel slope of 68.9 mV dec-1 with an overpotential of 337 mV at 10 mA cm-2 current density. The OER activity of the CoTIA MOF is relatively equivalent to that of the state-of-the-art catalyst (RuO2). Furthermore, the mechanical stability of crystalline ZnTIA, CoTIA and CdTIA MOFs was tested under ball mill pressure. The result showed that all the MOFs exhibit low tolerance to mechanical force because their structure was highly distorted or collapsed under such pressure, which is reflected by their poor electrocatalytic OER activity.