Electro-optic Platform Research Articles

Single-drive electro-optic frequency comb source on a photonic-wire-bonded thin-film lithium niobate platform.

Stable pulse and flat-top frequency comb generation are an indispensable component of many photonic applications, from ranging to communications. Lithium niobate on insulator is an excellent electro-optic (EO) platform, exhibiting high modulation efficiency and low optical loss, making it a fitting candidate for pulse generation through electro-optic modulation of continuous-wave (CW) light, a commonly utilized method for generating ultrashort pulses. Here, we demonstrate an on-chip electro-optic comb generation module on thin-film lithium niobate (TFLN) consisting of a Mach-Zehnder interferometer (MZI) amplitude modulator (AM) and a cascaded phase modulator (PM) system driven by a single-electrode drive. We show that when operated in the correct regime, the lithium niobate chips can generate frequency combs with excellent spectral power flatness. In addition, we optically package one of the pulse generator chips via photonic wire bonding. The pulses generated by the photonic-wire-bonded device are compressed to 840 fs pulse duration using an optical fiber and show extremely stable operation.

A Novel Proposal of an Electro-Optical Sensor to Measure Various Levels of an Electric Field Using Pockels Effect Photonic Crystals

Electro-optic sensors based on the Pockels effect are key components for optical instrumentation due to their speed and accuracy. In this work, we propose a new electro-optic platform using two-dimensional photonic crystals of gallium arsenide and barium titanate (GaAs-BTO). This structure allows for the measurement of various electric field levels, from 0 kV/mm to 50 kV/mm, with a very high sensitivity and a compact size. The opto-geometric parameters of this sensor were chosen, optimized, and analyzed numerically using the Plane Wave Expansion (PWE) and Finite-Difference Time-Domain (FDTD) methods.

Thin-film lithium-niobate electro-optic platform for spectrally tailored dual-comb spectroscopy

Laser frequency comb generators on photonic chips open up the exciting prospect of integrated dual-comb microspectrometers. Amongst all nanophotonic platforms, the technology of low-loss thin-film lithium-niobate-on-insulator shows distinguishing features, such as the possibility to combine various optoelectronic and nonlinear optical functionalities that harness second- and third-order nonlinearities, and thus promises the fabrication of a fully on-chip instrument. Here, a critical step towards such achievement is demonstrated with an electro-optic microring-based dual-comb interferometer. Spectra centered at 191.5 THz and spanning 1.6 THz (53 cm−1) at a resolution of 10 GHz (0.33 cm−1) are obtained in a single measurement without requiring frequency scanning or moving parts. The frequency agility of the system enables spectrally-tailored multiplexed sensing, which allows for interrogation of non-adjacent spectral regions, here separated by 6.6 THz (220 cm−1), without compromising the signal-to-noise ratio. Our studies show that electro-optic-based nanophotonic technology holds much promise for new strategies of molecular sensing over broad spectral bandwidths.

A Wireless Electro-Optic Platform for Multimodal Electrophysiology and Optogenetics in Freely Moving Rodents.

This paper presents the design and the utilization of a wireless electro-optic platform to perform simultaneous multimodal electrophysiological recordings and optogenetic stimulation in freely moving rodents. The developed system can capture neural action potentials (AP), local field potentials (LFP) and electromyography (EMG) signals with up to 32 channels in parallel while providing four optical stimulation channels. The platform is using commercial off-the-shelf components (COTS) and a low-power digital field-programmable gate array (FPGA), to perform digital signal processing to digitally separate in real time the AP, LFP and EMG while performing signal detection and compression for mitigating wireless bandwidth and power consumption limitations. The different signal modalities collected on the 32 channels are time-multiplexed into a single data stream to decrease power consumption and optimize resource utilization. The data reduction strategy is based on signal processing and real-time data compression. Digital filtering, signal detection, and wavelet data compression are used inside the platform to separate the different electrophysiological signal modalities, namely the local field potentials (1–500 Hz), EMG (30–500 Hz), and the action potentials (300–5,000 Hz) and perform data reduction before transmitting the data. The platform achieves a measured data reduction ratio of 7.77 (for a firing rate of 50 AP/second) and weights 4.7 g with a 100-mAh battery, an on/off switch and a protective plastic enclosure. To validate the performance of the platform, we measured distinct electrophysiology signals and performed optogenetics stimulation in vivo in freely moving rondents. We recorded AP and LFP signals with the platform using a 16-microelectrode array implanted in the primary motor cortex of a Long Evans rat, both in anesthetized and freely moving conditions. EMG responses to optogenetic Channelrhodopsin-2 induced activation of motor cortex via optical fiber were also recorded in freely moving rodents.

Integrated electro-optic platform using ferroelectric crystals with the point symmetry of orthorhombic mm2

We theoretically and numerically investigate the modulation efficiencies of integrated electro-optic (EO) modulators based on ferroelectric crystals with the point symmetry of orthorhombic mm2. An analytical expression describing the index-ellipsoid under the EO effect is derived, where all 5 non-zero linear EO coefficients of mm2-crystals are considered. As practical candidates for integrated EO platform, three mm2-crystals (KNbO3, KTiOPO4, and Ba2NaNb5O15) that are well-established and commercially available are chosen for numerical simulations. The refractive-index (RI) changes caused by an external electric field applied to each crystal with an arbitrary direction are analyzed in detail for the given optical polarization states of input light wave. For each crystal, the modulation efficiency is evaluated in terms of the half-wave voltage required for a π-phase shift of input wave, which is compared with the established counterpart based on LiNbO3. The results indicate that higher modulation efficiencies are achievable in the two schemes using KNbO3 and Ba2NaNb5O15 than those for other cases, meaning that either lower power-consuming or larger beam-window integrated EO devices are feasible.

Electronically programmable photonic molecule

Physical systems with discrete energy levels are ubiquitous in nature and are fundamental building blocks of quantum technology. Realizing controllable artifcial atom- and molecule-like systems for light would allow for coherent and dynamic control of the frequency, amplitude and phase of photons. In this work, we demonstrate a photonic molecule with two distinct energy-levels and control it by external microwave excitation. We show signature two-level dynamics including microwave induced photonic Autler-Townes splitting, Stark shift, Rabi oscillation and Ramsey interference. Leveraging the coherent control of optical energy, we show on-demand photon storage and retrieval in optical microresonators by reconfguring the photonic molecule into a bright-dark mode pair. These results of dynamic control of light in a programmable and scalable electro-optic platform open doors to applications in microwave photonic signal processing, quantum photonics in the frequency domain, optical computing concepts and simulations of complex physical systems.

Electrically Tunable Harmonic Generation of Light from Plasmonic Structures in Electrolytes.

An emerging trend in plasmonics is to exploit nanostructured metals as a self-contained electrooptic platform with simultaneously supported electrical and optical functions. When it comes to nonlinear optics, this dual electrical and optical functionality offers an exciting potential to enable electrically controlled wave mixing processes in various nanometallic systems. Here we demonstrate tunable nonlinear generation of light enabled by an electrically active plasmonic crystal in aqueous electrolytic solutions. A modulation depth of ∼150%/V is observed in the second-harmonic signal, thanks to the light concentrating ability of the resonant plasmonic structure as well as the voltage-assisted charge accumulation on the metallic surfaces. The hybrid plasmonic-electrolyte system demonstrated in this work offers the exciting new potential to use plasmonic nanostructures for voltage-controlled nonlinear signal generation and in situ biochemical sensing in an aqueous environment.

\(2 \times 100\) -Gb/s NRZ-OOK Integrated Transmitter for Intradata Center Connectivity

We demonstrate an integrated transmitter that can generate two 100-Gb/s optical channels with simple nonreturn-to-zero-ON-OFF keying format. The transmitter is based on the combination of an ultrafast electro-optic polymer platform for the photonic integration and the optical modulation with ultrafast InP-double heterojunction bipolar transistor electronics for the multiplexing and the amplification of the 100-Gb/s driving signals. Through error-free transmission of 2 × 80-Gb/s signals over 1 km of SMF and transmission of 2 × 100-Gb/s signals over 500 m of single-mode fiber with error performance way below the forward error correction limit, we reveal the potential of the approach for parallel 100-GbE optical interfaces in small footprint transceivers for intradata center networks.

Complex monolithic and InP hybrid integration on high bandwidth electro-optic polymer platform

We report on the monolithic integration of multimode interference couplers, Bragg gratings, and delay-line interferometers on an electro-optic polymer platform capable of modulation directly at 100 Gb/s. We also report on the hybrid integration of InP active components with the polymer structure using the butt-coupling technique. Combining the passive and the active components, we demonstrate a polymer-based, external cavity laser with 17 nm tuning range and the optical assembly of an integrated 100 Gb/s transmitter, and we reveal the potential of the electro-optic polymer technology to provide the next generation integration platform for complex, ultra-high-speed optical transceivers.