Efficient Triplet Energy Transfer Research Articles

Tunneling-Driven Marcus-Inverted Triplet Energy Transfer in a Two-Dimensional Perovskite.

Quantum tunneling, a phenomenon that allows particles to pass through potential barriers, can play a critical role in energy transfer processes. Here, we demonstrate that the proper design of organic-inorganic interfaces in two-dimensional (2D) hybrid perovskites allows for efficient triplet energy transfer (TET), where quantum tunneling of the excitons is the key driving force. By employing temperature-dependent and time-resolved photoluminescence and pump-probe spectroscopy techniques, we establish that triplet excitons can transfer from the inorganic lead-iodide sublattices to the pyrene ligands with rapid and weakly temperature-dependent characteristic times of approximately 50 ps. The energy transfer rates obtained based on the Marcus theory and first-principles calculations show good agreement with the experiments, indicating that the efficient tunneling of triplet excitons within the Marcus-inverted regime is facilitated by high-frequency molecular vibrations. These findings offer valuable insights into how one can effectively manipulate the energy landscape in 2D hybrid perovskites for energy transfer and the creation of diverse excitonic states.

Tuning Energy Transfer Pathways in Halide Perovskite-Dye Hybrids through Bandgap Engineering.

Lead halide perovskite nanocrystals, which offer rich photochemistry, have the potential to capture photons over a wide range of the visible and infrared spectrum for photocatalytic, optoelectronic, and photon conversion applications. Energy transfer from the perovskite nanocrystal to an acceptor dye in the form of a triplet or singlet state offers additional opportunities to tune the properties of the semiconductor-dye hybrid and extend excited-state lifetimes. We have now successfully established the key factors that dictate triplet energy transfer between excited CsPbI3 and surface-bound rhodamine dyes using absorption and emission spectroscopies. The pendant groups on the acceptor dyes influence surface binding to the nanocrystals, which in turn dictate the energy transfer kinetics, as well as the efficiency of energy transfer. Of the three rhodamine dyes investigated (rhodamine B, rhodamine B isothiocyanate, and rose Bengal), the CsPbI3-rose Bengal hybrid with the strongest binding showed the highest triplet energy transfer efficiency (96%) with a rate constant of 1 × 109 s-1. This triplet energy transfer rate constant is nearly 2 orders of magnitude slower than the singlet energy transfer observed for the pure-bromide CsPbBr3-rose Bengal hybrid (1.1 × 1011 s-1). Intriguingly, although the single-halide CsPbBr3 and CsPbI3 nanocrystals selectively populate singlet and triplet excited states of rose Bengal, respectively, the mixed halide perovskites were able to generate a mixture of both singlet and triplet excited states. By tuning the bromide/iodide ratio and thus bandgap energy in CsPb(Br1-xIx)3 compositions, the percentage of singlets vs triplets delivered to the acceptor dye was systematically tuned from 0 to 100%. The excited-state properties of halide perovskite-molecular hybrids discussed here provide new ways to modulate singlet and triplet energy transfer in semiconductor-molecular dye hybrids through acceptor functionalization and donor bandgap engineering.

TADF-Based X-ray Screens with Simultaneously Efficient Singlet and Triplet Energy Transfer for High Spatial Imaging Resolution.

X-ray imaging scintillators play a crucial role in medical examinations and safety inspections, making them an essential technology in our modern lives. However, commercially available high-performance scintillators are fabricated exclusively from ceramic materials that require harsh preparation conditions and are costly to produce. Organic scintillators have emerged as a promising alternative due to their transparency and ease of fabrication at a low cost. Unfortunately, organic scintillators suffer from inefficient exciton utilization efficiency, leading to poor performance in X-ray imaging screens and hindering their commercialization. In this study, we explore the use of thermally activated delayed fluorescence (TADF) chromophores (4CzIPN-I and 4CzTPN) to enhance the absorption of ionizing radiation in X-ray imaging screens by an order of magnitude. By leveraging the unique features of TADF chromophores through simultaneously singlet-singlet and triplet-triplet efficient energy transfers at the interface between two different TADF systems, we demonstrate an impressive X-ray sensitivity and radioluminescence intensity. Our time-resolved experiments and density functional theory (DFT) calculations provide further evidence for the effectiveness of this approach. The resulting X-ray imaging screens based on this efficient interfacial energy transfer process in TADF systems exhibit outstanding X-ray imaging resolution of 20 line pairs/mm, the highest resolution reported thus far for organic scintillators. This resolution is at least two times higher than that achieved by commonly used commercial inorganic scintillators in the X-ray imaging market. These findings introduce a new component for greatly improving the performance of organic X-ray imaging scintillators, supporting a wide range of emerging X-ray applications with exceptional spatial resolution.

NIR-Absorbing B,N-Heteroarene as Photosensitizer for High-Performance NIR-to-Blue Triplet-Triplet Annihilation Upconversion.

Triplet-triplet annihilation upconversion (TTA-UC) with near-infrared (NIR) photosensitizers is highly desirable for a variety of emerging applications. However, the development of NIR-to-blue TTA-UC with a large anti-Stokes shift is extremely challenging because of the energy loss during the intersystem crossing (ISC). Here, we develop the first NIR-absorbing B,N-heteroarene-based sensitizer (BNS) with multi-resonance thermally activated delayed fluorescence (MR-TADF) characters to achieve efficient NIR-to-blue TTA-UC. The small energy gap between the singlet and triplet excited states (0.14 eV) of BNS suppresses the ISC energy loss, and its long-delayed fluorescence lifetime (115 μs) contributes to efficient triplet energy transfer. As a result, the largest anti-Stokes shift (1.03 eV) among all heavy-atom-free NIR-activatable TTA-UC systems is obtained with a high TTA-UC quantum yield of 2.9 % (upper limit 50 %).

NIR‐Absorbing B,N‐Heteroarene as Photosensitizer for High‐Performance NIR‐to‐Blue Triplet‐Triplet Annihilation Upconversion

AbstractTriplet‐triplet annihilation upconversion (TTA‐UC) with near‐infrared (NIR) photosensitizers is highly desirable for a variety of emerging applications. However, the development of NIR‐to‐blue TTA‐UC with a large anti‐Stokes shift is extremely challenging because of the energy loss during the intersystem crossing (ISC). Here, we develop the first NIR‐absorbing B,N‐heteroarene‐based sensitizer (BNS) with multi‐resonance thermally activated delayed fluorescence (MR‐TADF) characters to achieve efficient NIR‐to‐blue TTA‐UC. The small energy gap between the singlet and triplet excited states (0.14 eV) of BNS suppresses the ISC energy loss, and its long‐delayed fluorescence lifetime (115 μs) contributes to efficient triplet energy transfer. As a result, the largest anti‐Stokes shift (1.03 eV) among all heavy‐atom‐free NIR‐activatable TTA‐UC systems is obtained with a high TTA‐UC quantum yield of 2.9 % (upper limit 50 %).

Design and Synthesis of Cofacially-Arrayed Polyfluorene Wires for Electron and Energy Transfer Studies.

A study of cofacially arrayed π-systems is of particular importance for the design of functional materials for efficient long-range intra-chain charge transfer through the bulk semiconducting materials in the layers of photovoltaic devices. The effect of π-stacking between a pair of aromatic rings has been mainly studied in the form of cyclophanes, where aromatic rings are forced into a sandwich-like geometry, which extensively deforms the aromatic rings from planarity. The synthetic difficulties associated with the preparation of cyclophane-like structures has prevented the synthesis of many examples of their multi-layered analogues. Moreover, the few available multi-layered cyclophanes are not readily amenable to the structural modification required for the construction of D-spacer-A triads needed to explore mechanisms of electron and energy transfer. In this review, we recount how a detailed experimental and computational analysis of 1,3-diarylalkanes led to the design of a new class of cofacially arrayed polyfluorenes that retain their π-stacked structure. Thus, efficient synthetic strategies have been established for the ready preparation of monodisperse polyfluorenes with up to six π-stacked fluorenes, which afford ready access to D-spacer-A triads by linking donor and acceptor groups to the polyfluorene spacers via single methylenes. Detailed 1H NMR spectroscopy, X-ray crystallography, electrochemistry, and He(I) photoelectron spectroscopy of F2-F6 have confirmed the rigid cofacial stacking of multiple fluorenes in F2-F6, despite the presence of rotatable C-C bonds. These polyfluorenes (F2-F6) form stable cation radicals in which a single hole is delocalized amongst the stacked fluorenes, as judged by the presence of intense charge-resonance transition in their optical spectra. Interestingly, these studies also discern that delocalization of a single cationic charge could occur over multiple fluorene rings in F2-F6, while the exciton is likely localized only onto two fluorenes in F2-F6. Facile synthesis of the D-spacer-A triads allowed us to demonstrate that efficient triplet energy transfer can occur through π-stacked polyfluorenes; the mechanism of energy transfer crosses over from tunneling to hopping with increasing number of fluorenes in the polyfluorene spacer. We suggest that the development of rigidly held π-stacked polyfluorenes, described herein, with well-defined redox and optoelectronic properties provides an ideal scaffold for the study of electron and energy transfer in D-spacer-A triads, where the Fn spacers serve as models for cofacially stacked π-systems.

Generation of Long-Lived Excitons in Room-Temperature Phosphorescence 2D Organic and Inorganic Hybrid Perovskites for Ultrafast and Low Power-Consumption Nonvolatile Photomemory.

Room-temperature phosphorescence (RTP) two-dimensional (2D) organic-inorganic hybrid perovskites (OIHPs) that possess superior stability and efficient triplet energy transfer between inorganic parts and organic cations have been seen as promising materials in optoelectronic devices. However, the development of RTP 2D OIHP-based photomemory has not been explored yet. In this work, the spatially addressable RTP 2D OIHPs-based nonvolatile flash photomemory is first investigated to explore the function of triplet excitons in elevating the performance of photomemory. Thanks to the triplet excitons generated in RTP 2D OIHP, extremely low photo-programming time of 0.7ms, multilevel behavior of minimum 7 bits (128 levels), remarkable photoresponsivity of 19.10 AW-1 and significantly low power consumption of 6.79 × 10-8 J per bit can be achieved. The current study provides a new prospective in understanding triplet excitons function in nonvolatile photomemory.

Structurally Flexible Au-Cu Alloy Nanoclusters Enabling Efficient Triplet Sensitization and Photon Upconversion.

Ligand-protected noble-metal nanoclusters exhibit an innately triplet nature and have been recently recognized as emerging platforms for triplet sensitizers of photon upconversion (UC) via triplet-triplet annihilation. Herein, we report that a structurally flexible Au-Cu alloy nanocluster, [Au4Cu4(S-Adm)5(DPPM)2]+ (Au4Cu4; S-Adm = 1-adamantanethiolate, DPPM = bis(diphenylphosphino)methane), exhibited favorable sensitizer properties and superior UC performance. Contrary to the structurally rigid Au2Cu6(S-Adm)6(TPP)2 (Au2Cu6, TPP = triphenylphosphine), Au4Cu4 exhibited significantly better sensitizer characteristics, such as a near-unity quantum yield for intersystem crossing (ISC), long triplet lifetime (ca. 8 μs), and efficient triplet energy transfer (TET). The efficient ISC of Au4Cu4 was attributed to the practically negligible activation barriers during the ISC process, which was caused by the spin-orbit interaction between the two isoenergetic isomers predicted by theoretical calculations. A series of aromatic molecules with different triplet energies were used as acceptors to reveal the driving force dependence of the TET rate constant (kTET). This dependency was analyzed to evaluate the triplet energy and sensitization ability of the alloy nanoclusters. The results showed that the maximum value of kTET for Au4Cu4 was seven times larger than that for Au2Cu6, which presumably reflects the structural/electronic fluctuations of Au4Cu4 during the triplet state residence. The combination of the Au4Cu4 sensitizer and the 9,10-diphenylanthracene (DPA) annihilator/emitter achieved UC with internal quantum yields of 14% (out of 50% maximum) and extremely low threshold intensities (2-26 mWcm-2). This performance far exceeds that of Au2Cu6 and is also outstanding among the organic-inorganic hybrid nanomaterials reported so far.

Thermally Activated Delayed Near‐Infrared Photoluminescence from Functionalized Lead‐Free Nanocrystals

AbstractAs an analogue to thermally activated delayed fluorescence (TADF) of organic molecules, thermally activated delayed photoluminescence (TADPL) observed in molecule‐functionalized semiconductor nanocrystals represents an exotic mechanism to harvest energy from dark molecular triplets and to obtain controllable, long‐lived PL from nanocrystals. The reported TADPL systems have successfully covered the visible spectrum. However, TADF molecules already emit very efficiently in the visible, diminishing the technological impact of the less‐efficient nanocrystal‐molecule TADPL. Here we report bright, near‐infrared TADPL in lead‐free CuInSe2 nanocrystals functionalized with carboxylated tetracene ligands, which results from efficient triplet energy transfer from photoexcited nanocrystals to ligands, followed with thermally activated reverse energy transfer from ligand triplets back to nanocrystals. This strategy prolonged the nanocrystal exciton lifetime from 100 ns to 60 μs at room temperature.

Thermally Activated Delayed Near-Infrared Photoluminescence from Functionalized Lead-Free Nanocrystals.

As an analogue to thermally activated delayed fluorescence (TADF) of organic molecules, thermally activated delayed photoluminescence (TADPL) observed in molecule-functionalized semiconductor nanocrystals represents an exotic mechanism to harvest energy from dark molecular triplets and to obtain controllable, long-lived PL from nanocrystals. The reported TADPL systems have successfully covered the visible spectrum. However, TADF molecules already emit very efficiently in the visible, diminishing the technological impact of the less-efficient nanocrystal-molecule TADPL. Here we report bright, near-infrared TADPL in lead-free CuInSe2 nanocrystals functionalized with carboxylated tetracene ligands, which results from efficient triplet energy transfer from photoexcited nanocrystals to ligands, followed with thermally activated reverse energy transfer from ligand triplets back to nanocrystals. This strategy prolonged the nanocrystal exciton lifetime from 100 ns to 60 μs at room temperature.

Triplet generation at the CdTe quantum dot/anthracene interface mediated by hot and thermalized electron exchange for enhanced production of singlet oxygen.

Triplet energy transfer (TET) from semiconductor quantum dots (QDs) to molecular triplets has potential applications in photon up-conversion and singlet oxygen generation. Here, we have constructed a complex consisting of CdTe QDs as the donor and 9-anthracenecarboxylic acid (ACA) as the triplet acceptor, and studied the TET pathways and enhanced singlet oxygen generation properties. The results from steady-state and time-resolved spectroscopy demonstrate efficient TET with a total efficiency of over 80% from photoexcited CdTe QDs to ACA. Dynamical analysis clearly indicates two distinctive TET channels - hot electron exchange and thermalized electron exchange - mediating the TET process in the CdTe QDs-ACA complex. The TET efficiencies from hot electron exchange at high energetic levels and thermalized electron exchange on the lowest exciton state can reach ∼27% and ∼85%, respectively, following 530 nm excitation. This efficient TET endows the CdTe QDs-ACA complex with a good capability of generating singlet oxygen species with a yield of up to ∼59%. These findings contribute further insights to the mechanisms of interfacial TET processes and are significant in designing efficient TET systems based on semiconductor nanoparticles and triplet molecules.

Efficient triplet energy transfer in a 0D metal halide hybrid with long persistence room temperature phosphorescence for time-resolved anti-counterfeiting

Due to strong overlap between the triplet emission of DPTA and 1S0 → 3Px absorption of Sb3+, efficient triplet energy transfer occurs between DPTA and Sb and the afterglow persistence time of DIC:x% Sb can be easily tailored through Sb3+ doping.

Dark Singlet Exciton Sensitized Triplet Energy Transfer Across the CsPbBr3 Nanoplate‐Organic Interface

AbstractSemiconductor nanocrystals (NCs) sensitized triplet energy transfer (TET) provides a promising alternative for achieving efficient triplet‐triplet annihilation up‐conversion (TTA‐UC). However, the study on the role of NC's exciton fine structure in TET, which is important to further enhance the TET efficiency, is still limited. Herein, the respective contribution of bright/dark exciton to TET using 1‐naphthoic acid (mediator) decorated 2 nm thick CsPbBr3 nanoplates as the model system is studied. The well‐characterized and unique exciton fine structure and large bright‐dark splitting energy of CsPbBr3 nanoplates provide an ideal platform to unambiguously explore the TET between dark singlet exciton and mediator. By using time‐resolved temperature dependent optical spectroscopy, the direct participation of dark singlet state in the TET process is proved and also point out that the dark singlet exciton to mediator TET is the major energy transfer pathway, which is due to the ill‐defined nature of exciton's spin in strongly confined nanoplates and dark exciton's long intrinsic lifetime. Finally, in combination with 2,5‐diphenyloxazole as annihilator, mediator decorated CsPbBr3 nanoplates can convert visible to ultraviolet light with a maximum photon gain of 0.75 eV under a low threshold of ≈0.76 W cm−2.

Optically Switchable NIR Photoluminescence of PbS Semiconducting Nanocrystals using Diarylethene Photoswitches.

Precisely modulated photoluminescence (PL) with external control is highly demanded in material and biological sciences. However, it is challenging to switch the PL on and off in the NIR region with a high modulation contrast. Here, we demonstrate that reversible on and off switching of the PL in the NIR region can be achieved in a bicomponent system comprised of PbS semiconducting nanocrystals (NCs) and diarylethene (DAE) photoswitches. Photoisomerization of DAE to the ring-closed form upon UV light irradiation causes substantial quenching of the NIR PL of PbS NCs due to efficient triplet energy transfer. The NIR PL fully recovers to an on state upon reversing the photoisomerization of DAE to the ring-open form with green light irradiation. Importantly, fully reversible switching occurs without obvious fatigue, and the high PL on/off ratio (>100) outperforms all previously reported assemblies of NCs and photoswitches.

Triplet energy transfer between inorganic nanocrystals and organic molecules

Merging the light- harvesting and emitting capability of inorganic materials with the versatile excited-state properties of organic molecules leveraging triplet energy transfer (TET) has recently become an important design strategy for light-driven applications ranging from energy conversion, biomedicine, to photoredox catalysis, and understanding the rules that govern such phenomena is essential. Recent years have witnessed some breakthroughs of TET as well as significant advances for regulating this photochemical process, but it still needs more integrated research at the center. In particular, efficient TET between semiconductor nanocrystals (or quantum dots) and organic molecules, which combines nanoscale size effect of the former and molecular versatility of the latter, has been demonstrated as a promising enabler for breaking the Shockley-Queisser limit in solar energy conversion, controlling photon emission, and driving photochemical reactions in the years to come. Here we review the fundamentals of TET mechanism and some of its emerging applications, with special focus on recent progress towards the understanding and application of TET in nanocrystal-molecule hybrids and highlight some challenges for the field. Work is currently aimed at providing insights in controlling TET dynamics with a view to making the process as efficient as possible according to expected designs.

Bright State Sensitized Triplet Energy Transfer from Quantum Dot to Molecular Acceptor Revealed by Temperature Dependent Energy Transfer Dynamics.

Quantum dot (QD) sensitized molecular triplet excited state generation has been a promising alternative for traditional triplet state harvesting schemes. However, the correlation between QD bright/dark states and QD sensitized triplet energy transfer (TET) has been unclear. Herein, we studied the bright/dark states contribution to TET with CdSe/CdS core/shell QD-oligothiophene as the model system. Equilibrium between QD bright and dark states was tuned by changing temperature, and TET dynamics were monitored with transient absorption spectroscopy. Analysis of acceptor triplet excited state growth kinetics yields rates of TET from bright and dark states as 0.492 ± 0.011 ns-1 and 0.0271 ± 0.0014 ns-1 at 5 K, suggesting significant contribution of bright states to TET. The result was rationalized by bright state wave function components with the same electron/hole spin projections leading to nonzero TET probability. The study provides new insights into QD sensitized TET mechanisms and inspiration for future TET efficiency optimization through QD exciton engineering.

Efficient Triplet-Triplet Annihilation Upconversion in Solution and Hydrogel Enabled by an S-T Absorption Os(II) Complex Dyad with an Elongated Triplet Lifetime.

A new Os(II) complex dyad featuring direct singlet-to-triplet (S-T) absorption and intramolecular triplet energy transfer (ITET) with lifetime up to 7.0 μs was designed to enhance triplet energy transfer efficiency during triplet-triplet annihilation upconversion (TTA-UC). By pairing with 9,10-bis(phenylethynyl)anthracene (BPEA) as a triplet acceptor, intense upconverted green emission in deaerated solution was observed with unprecedented TTA-UC emission efficiency up to 26.3% (with a theoretical maximum efficiency of 100%) under photoexcitation in the first biological transparency window (650-900 nm). Meanwhile, a 7.1% TTA-UC emission efficiency was acquired in an air-saturated hydrogel containing the photosensitizer and a newly designed hydrophilic BPEA derivative. This ITET mechanism would inspire further development of a highly efficient TTA-UC system for biological fields and renewable energy production.

Visible-Light Mediated Metal-Free 6π-Photocyclization of N-Acrylamides: Thioxanthone Triplet Energy Transfer Enables the Synthesis of 3,4-Dihydroquinolin-2-ones.

An efficient thioxanthone-catalyzed triplet energy transfer process for the synthesis of 3,4-dihydroquinolin-2-ones via a 6π-photocyclization is reported. Featuring a rare example of a metal-free formal C(sp2)-H/C(sp3)-H arylation mediated by visible-light, this work hopes to inspire further interest in these small molecules as sustainable alternatives to existing transition-metal photocatalysts in related processes.

Air‐Stable Silicon Nanocrystal‐Based Photon Upconversion

AbstractPhoton upconversion may have the highest impact in biological applications because incoming photons transparent to tissue can be combined to make visible light useful for photodynamic therapy and imaging. The ability to use semiconductor nanocrystals as light absorbers for photon upconversion is important because their strong absorption profiles are synthetically tunable. In particular, the use of earth‐abundant, environmentally benign silicon quantum dots (QDs) as light absorbers for photon upconversion is very attractive. In this work, the authors demonstrate a general strategy employing both physical and chemical barriers to achieve air‐stable fusion of triplet excitons photosensitized by silicon QDs, crucial to practical applications of photon upconversion. Gel permeation chromatography (GPC) and dynamic light scattering (DLS) show that thermal hydrosilylation critical for colloidal stability and efficient triplet energy transfer creates a polymeric barrier to oxygen. This kinetic barrier to oxygen arises from the presence of cross‐linked surfactants and is complemented by the sacrificial oxidation of silicon QDs itself. Photon upconversion lasted longer than 4 days with quantum yields (QYs) as high as 7.5% (out of a maximum of 50%) using Si QD light absorbers with diphenylanthracene in methyl oleate. Oil‐in‐water micelles are air‐stable for 2 days with absolute upconversion QYs of 5.5%.

Bulk Transparent Photon Upconverting Films by Dispersing High-Concentration Ionic Emitters in Epoxy Resins

It remains challenging to achieve efficient and air-stable photon upconversion (UC) in rigid, technologically valuable transparent films. Here, we report the first example of epoxy resins that show an air-stable and efficient triplet-triplet annihilation (TTA)-based UC. Epoxy resins are thermally cross-linked polymers widely used as coating and sealing materials in actual devices. To achieve efficient TTA-UC in rigid epoxy films, it is essential to execute both the triplet sensitization and triplet exciton diffusion processes without relying on molecular diffusion. This requires homogeneously dispersing emitter molecules without aggregation in three-dimensionally cross-linked rigid polymer networks at a high concentration (ca. 1000 mM) such that the inter-emitter distance is less than 1 nm, where dexter energy transfer can occur. This difficult requirement is solved by employing an ionic liquid emitter that consists of 9,10-diphenylanthracene sulfonate and lipophilic phosphonium ions bearing long alkyl chains. The obtained epoxy resins show a high TTA-UC efficiency (ηUC = 3.8%) and low threshold excitation intensity (Ith = 40 mW cm-2) in air. These UC parameters are achieved by virtue of a very high sensitizer-to-emitter triplet energy-transfer efficiency (92.8%) and a significantly long emitter triplet lifetime (17.8 ms) that reflect the high emitter concentration and the rigid chromophore environment, respectively. The bulk transparent upconverting resins can be prepared in air and function in air, which opens a new avenue toward a wide range of real-world applications.