Efficient Photocyclization Research Articles

Polycyclic Heteroaromatic π‐Linkers Provide Dithienylethene Switches with Favorable Thermal and Photochemical Properties for Solar‐Energy Storage

AbstractDithienylethene photoswitches with an aromatic π‐linker as the bridge between the two thiophene units are attractive starting materials for developing molecular solar thermal energy (MOST) storage systems, partly because the aromaticity of their ring‐open forms is a favorable feature with regard to the energy‐storage densities of their ring‐closed forms produced by photoinduced electrocyclization (photocyclization) reactions. At the same time, this typically leads to small barriers for their thermal cycloreversion reactions, which are not desirable in this context. Here, we use computational methods to show that this problem can be circumvented with polycyclic heteroaromatic π‐linkers. Specifically, through the tuning of the aromatic character of the individual rings of such a π‐linker (like indole or isoindole), it is shown to be possible to strike a delicate balance between the seemingly contrasting requirements of simultaneously achieving both a high energy‐storage density and a large cycloreversion barrier. Furthermore, this design is also found to provide for a quick and efficient photocyclization reaction, owing to the onset of excited‐state antiaromaticity in the π‐linker upon light absorption of the ring‐open form. Altogether, dithienylethenes with polycyclic heteroaromatic π‐linkers appear to have both thermal and photochemical properties suitable for further development into future MOST systems.

Free Radical-Mediated Photocyclization of Triphenylphosphindole Oxides for Photoactivated and Self-Reported Lipid Peroxidation.

Photocyclization is demonstrated as a powerful tool for building complicated polycyclic molecules. And efficient photocyclization is competent as an artful strategy to develop photo-responsive smart materials. Herein, an efficient free radical-mediated photocyclization for triphenylphosphindole oxide (TPPIO) derivatives to generate tribenzophosphindole oxide (TBPIO) derivatives at ambient condition is reported. The reaction mechanism and substituent effect on photocyclization efficiency are thoroughly investigated. Additionally, photophysical and photochemical properties of TPPIO and TBPIO derivatives are measured for comparison and deeply deciphered by theoretical calculation. TPPIO derivatives own typical aggregation-induced emission feature but barely generate reactive oxygen species (ROS), while TBPIO derivatives experience aggregation-caused quenching but show efficient Type I ROS generation capacity. Further, in vitro experiments demonstrate that this photo-conversion can efficiently occur in situ in living cells to activate photodynamic therapy (PDT) effect to trigger lipid peroxidation with selective fluorescence "light up" in lipid droplet area under continuous irradiation. This work extends the optoelectronically and biologically interesting phosphindole oxide-containing π-conjugated systems through an efficient synthetic strategy, provides in-depth mechanistic descriptions in the aspects of reaction and property, and further presents their great potentials for photoactivated and self-reported PDT.

Photocyclization reaction and related photodynamics in the photoproducts of a tetraphenylethylene derivative with bulky substituents: unexpected solvent viscosity effect.

Tetraphenylethylene (TPE) derivatives are ones of the most versatile building blocks showing aggregation-induced emission (AIE). However, their applications are limited by the photophysical and photochemical processes that occur in their excited state. Herein, we report a detailed study of the photochemical behaviour of a new TPE derivative with bulky terphenyl groups (TTECOOBu) in solvents of different viscosities and in a PMMA film. UV light irradiation shows an efficient photocyclization reaction, which produces a 9,10-diphenylphenanthrene (DPP) derivative photoproduct. The emission spectra of the irradiated samples show intermediate (∼420 nm) and final (∼380 nm) species. The photocyclization events are more efficient in environments of higher viscosities or rigidity. We show that in a photoirradiated PMMA film containing TTECOOBu, it is possible to etch a message for more than 1 year. The kinetics is dictated by the motions of the phenyl rings and is faster when their motions are precluded or inhibited. We also elucidated the femto- to millisecond photodynamics of the intermediate and final photoproducts and provide a full picture of their relaxation, with the latter in ∼1 ns at S1 and ∼1 μs at T1. We also demonstrate that the kinetics of the bulky TTECOOBu is much slower than that of the TPE core. Our results also show that both photoevents are not reversible contrary to the case of TPE kinetics. We believe that these results will shed more light on the photochemical behaviour of TPE derivatives and should help in the development of novel TPE-based materials with improved photostability and photo-properties.

Cucurbit[8]uril-induced diarylethene thermally activated delay fluorescence supramolecular switch for sequential energy transfer

Constructing molecular switches based on supramolecular assembly strategy is a research hotspot. In this work, we constructed an all visible-light-regulated supramolecular photo-switch based on pyridinium-modified diarylethene derivative (DTE-Me) and cucurbit[8]uril (CB[8]). CB[8] not only accelerated the photochromic process under 365 nm ultraviolet light but also shifted the absorption of open formed DTE-Me to the visible region, which led to efficient photocyclization under 450 nm visible light irradiation, while DTE-Me and DTE-Me/CB[7] remained unchanged under the same irradiating condition. Moreover, the complexation with CB[8] could induce the strong thermally activated delayed fluorescence (TADF) of guest molecular at 550 nm, which further shifted to 670 nm through two-step sequential energy transfer with sulforhodamine B (SRB) and Cy5. This energy transfer process could also be regulated with visible light, and the application for information encryption was also demonstrated. This assembly provides a convenient approach to construct all visible light-regulated TADF photo-switch.

Unsymmetrical benzothiazole-based dithienylethene photoswitches.

Herein, we investigate the structure-property relationships in a new series of benzothiazole based unsymmetrical hexafluorocyclopentene dithienylethenes (DTEs) and compare the results with the known facts for symmetric diarylethenes (DAEs). We reveal high photocyclization efficiency resulting from a significant shift of ground state equilibrium to the antiparallel conformation and a barrierless excited state pathway to conical intersection, which remains unperturbed even in polar solvents for most of the prepared DTEs. Furthermore, we uncover that the rate of back thermal cycloreversion correlates clearly more with the central C-C bond-length in the transition state than with the central C-C bond-length in the ground state of the cyclic form. Finally, our detailed vibrational spectral analysis of studied DTEs points out significant changes in Raman and infrared spectra during photoswitching cycles which pave the way for a non-destructive readout of stored information.

Multiwavelength-controlled multicolor photochromism and fluorescence switching based on an efficient photocyclization reaction by introducing two photoactive subunits into AIEgens

Multiwavelength-controlled multicolor photochromism and fluorescence switching were achieved by introducing two photoactive subunits with varied conjugation into the tetraarylethene skeleton with aggregation-induced emission.

Highly luminescent ladder dimer based on perylene diimides and norbornane

Solution processable functional ladder-type materials with well-defined structures attract tremendous interest from the researchers due to their extraordinary stability and intriguing photoelectric properties, while the development of efficient and versatile synthetic routes still remains as an enormous challenge. Herein, we report a novel synthetic strategy towards a ladder-type PDI dimer by efficient photo-cyclization reaction of the single stranded precursor. The incorporation of the norbornane bridge endows the ladder dimer with planar PDI units, zigzag molecular conformation, and good solubility in various solvents. Besides superior thermal and photo-stability, LPD exhibits fluorescent quantum yields (QY) of 90.8% and 25.7% in solution and film, respectively. Both values are significantly higher than those of the single-stranded counterpart SPD (85.1% and 7.5%).

Photon-Quantitative 6π-Electrocyclization of a Diarylbenzo[b]thiophene in Polar Medium.

The high reactivity of 6π-electrocyclization in polar solvents has remained one of the important challenges for diarylethenes because of the emergence of a twisted intramolecular charge transfer (TICT) state at the excited state in such polar media, which usually quenches the photocyclization reaction. Herein we report on the preparation and highly efficient photocyclization of 2,3-diarylbenzo[b]thiophenes with nonsymmetric side-aryl units in a polar solvent. While the dithiazolylbenzo[b]thiophene showed a suppressed quantum yield of 6π-electrocyclization of 54 % in methanol, the replacement of a thiazole unit with a thiophene ring led to a photon-quantitative 6π-cyclization reaction. The nonsymmetrical modification into the side-aryl units was considered to enhance the CH/π interactions between side-aryl units to support a photoreactive conformation in methanol. The stabilization of the photochromic reactive conformation is expected to suppress the formation of the TICT state at the excited state, leading to highly efficient photoreactivity.

Novel Naphthalene Based Lariat-Type Crown Ethers Using Direct Single Electron Transfer Photochemical Strategy

This study explored a direct SET-photochemical strategy to construct a new family of thioene conjugatednaphthalamide fluorophore based lariat-crown ethers which show strong binding properties towards heavy metal ions. Irradiations of designed nitrogen branched (trimethylsilyl)methylthio-terminated polyethylenoxytethered naphthalimides in acidic methanol solutions have led to highly efficient photocyclization reactions to generate naphthalamide based lariat type thiadiazacrown ethers directly in chemo- and regio-selective manners which undergo very facile secondary dehydration reactions during separation processes to produce their corresponding amidoenethio ether cyclic products tethered with electron donating diethyleneoxy- and diethyenethio-side arm chains. Fluorescence and metal cation binding properties of the lariat type enamidothio products were examined. The photocyclized amidoenethio products, thioene conjugated naphthalamide fluorophore containing lariat-thiadiazacrowns exhibited strong fluorescence emissions in region of 330-450 nm along with intramolecular exciplex emissions in region of 450-560 nm with their maxima at 508 nm. Divalent cation Hg 2+ and Pb 2+ showed strong binding to sulfur atom(s) in side arm chain and atoms in enethiadiazacrown ether rings which led to significant enhancement of fluorescence from its chromophore singlet excited state and concomitant quenching of exciplex emission. The dual fluorescence emission responses towards divalent cations might provide a new guide for design and development of fluorescence sensors for detecting those metals.

Triplet Pathways in Diarylethene Photochromism: Photophysical and Computational Study of Dyads Containing Ruthenium(II) Polypyridine and 1,2-Bis(2-methylbenzothiophene-3-yl)maleimide Units

A 1,2-bis(2-methylbenzothiophene-3-yl)maleimide model ( DAE) and two dyads in which this photochromic unit is coupled, via a direct nitrogen-carbon bond ( Ru-DAE) or through an intervening methylene group ( Ru-CH 2-DAE ), to a ruthenium polypyridine chromophore have been synthesized. The photochemistry and photophysics of these systems have been thoroughly characterized in acetonitrile by a combination of stationary and time-resolved (nano- and femtosecond) spectroscopic methods. The diarylethene model DAE undergoes photocyclization by excitation at 448 nm, with 35% photoconversion at stationary state. The quantum yield increases from 0.22 to 0.33 upon deaeration. Photochemical cycloreversion (quantum yield, 0.51) can be carried out to completion upon excitation at lambda > 500 nm. Photocyclization takes place both from the excited singlet state (S 1), as an ultrafast (ca. 0.5 ps) process, and from the triplet state (T 1) in the microsecond time scale. In Ru-DAE and Ru-CH 2-DAE dyads, efficient photocyclization following light absorption by the ruthenium chromophore occurs with oxygen-sensitive quantum yield (0.44 and 0.22, in deaerated and aerated solution, respectively). The photoconversion efficiency is almost unitary (90%), much higher than for the photochromic DAE alone. Efficient quenching of both Ru-based MLCT phosphorescence and DAE fluorescence is observed. A complete kinetic characterization has been obtained by ps-ns time-resolved spectroscopy. Besides prompt photocyclization (0.5 ps), fast singlet energy transfer takes place from the excited diarylethene to the Ru(II) chromophore (30 ps in Ru-DAE, 150 ps in Ru-CH 2-DAE ). In the Ru(II) chromophore, prompt intersystem crossing to the MLCT triplet state is followed by triplet energy transfer to the diarylethene (1.5 ns in Ru-DAE, 40 ns in Ru-CH 2-DAE ). The triplet state of the diarylethene moiety undergoes cyclization in a microsecond time scale. The experimental results are complemented with a combined ab initio and DFT computational study whereby the potential energy surfaces (PES) for ground state (S 0) and lowest triplet state (T 1) of the diarylethene are investigated along the reaction coordinate for photocyclization/cycloreversion. At the DFT level of theory, the transition-state structures on S 0 and T 1 are similar and lean, along the reaction coordinate, toward the closed-ring form. At the transition-state geometry, the S 0 and T 1 PES are almost degenerate. Whereas on S 0 a large barrier (ca. 45 kcal mol (-1)) separates the open- and closed-ring minima, on T 1 the barriers to isomerization are modest, cyclization barrier (ca. 8 kcal mol (-1)) being smaller than cycloreversion barrier (ca. 14 kcal mol (-1)). These features account for the efficient sensitized photocyclization and inefficient sensitized cycloreversion observed with Ru-DAE. Triplet cyclization is viewed as a nonadiabatic process originating on T 1 at open-ring geometry, proceeding via intersystem crossing at transition-state geometry, and completing on S 0 at closed-ring geometry. A computational study of the prototypical model 1,2-bis(3-thienyl)ethene is used to benchmark DFT results against ab initio CASSCF//CASPT2 results and to demonstrate the generality of the main topological features of the S 0 and T 1 PES obtained for DAE. Altogether, the results provide strong experimental evidence and theoretical rationale for the triplet pathway in the photocyclization of photochromic diarylethenes.

Photochemical Reactivity of 2-Vinylbiphenyl and 2-Vinyl-1,3-terphenyl: The Balance between Nonadiabatic and Adiabatic Photocyclization

A mechanism for the photochemical conversion of 2-vinyl-1,3-terphenyl to 8,9a-dihydrophenanthrene (Lewis, F. D.; Zuo, X.; Gevorgyan, V.; Rubin, M. J. Am. Chem. Soc. 2002, 124, 13664-13665) is presented in this study, based on ab initio restricted active space self-consistent field calculations and a molecular mechanics-valence bond dynamics simulation of a model system: the syn isomer of 2-vinylbiphenyl. An extended crossing seam between the ground and first excited electronic states was found to be largely responsible for the efficient photocyclization of the photochemically active syn isomer. This mechanism is nonadiabatic in nature, with an excited-state reaction pathway approaching the crossing region during the initial stage of cyclization. Dynamics simulation shows that this seam is easily accessible by vibrational motion in the branching space, once a small barrier is passed on the S1 excited-state potential energy surface. Ultrafast radiationless decay to the ground state then follows, and the cyclization is completed on this surface. A second possible mechanism was identified, which involves complete adiabatic cyclization on the S1 surface, with decay to the ground state (at a different conical intersection) only taking place once the product is formed. Thus, there is a competition between these two mechanisms-nonadiabatic and adiabatic-governed by the dynamics of the system. A large quantum yield is predicted for the photocyclization of the syn isomer of 2-vinylbiphenyl and 2-vinyl-1,3-terphenyl, in agreement with experimental observations.

Photochromic dithienylethene derivatives containing Ru(II) or Os(II) metal units. Sensitized photocyclization from a triplet state.

Efficient photocyclization from a low-lying triplet state is reported for a photochromic dithienylperfluorocyclopentene with Ru(bpy)3 units attached via a phenylene linker to the thiophene rings. The ring-closure reaction in the nanosecond domain is sensitized by the metal complexes. Upon photoexcitation into the lowest Ru-to-bpy 1MLCT state followed by intersystem crossing to emitting 3MLCT states, photoreactive 3IL states are populated by an efficient energy-transfer process. The involvement of these 3IL states explains the quantum yield of the photocyclization, which is independent of the excitation wavelength but decreases strongly in the presence of dioxygen. This behavior differs substantially from the photocyclization of the nonemissive dithienylperfluorocyclopentene free ligand, which occurs from the lowest 1IL state on a picosecond time scale and is insensitive to oxygen quenching. Cyclic voltammetric studies have also been performed to gain further insight into the energetics of the system. The very high photocyclization quantum yields, far above 0.5 in both cases, are ascribed to the strong steric repulsion between the bulky substituents on the dithienylperfluorocyclopentene bridge bearing the chelating bipyridine sites or the Ru(bpy)3 moieties, forcing the system to adopt nearly exclusively the reactive antiparallel conformation. In contrast, replacement of both Ru(II) centers by Os(II) completely prevents the photocyclization reaction upon light excitation into the low-lying Os-to-bpy 1MLCT state. The photoreaction can only be triggered by optical population of the higher lying 1IL excited state of the central photochromic unit, but its yield is low due to efficient energy transfer to the luminescent lowest 3MLCT state.

Crystal engineering of photochromic diarylethene single crystals.

Photochromic performance of diarylethene single crystals was controlled by crystal engineering using non-covalent aromatic-aromatic interactions as the directional intermolecular force. A diarylethene derivative with two pentafluorophenyl groups, 1,2-bis(2-methyl-5-pentafluorophenyl-3-thienyl)perfluorocyclopentene (1a), formed stoichiometric co-crystals with benzene (Bz) and naphthalene (Np) by aryl-perfluoroaryl interactions. Face-to-face pi-stacking interactions between the pentafluorophenyl groups of 1a and the aromatic molecules are responsible for 2:1 and 1:1 stoichiometric compositions in 1a/Bz and 1a/Np co-crystals, respectively. The diarylethene underwent thermally stable and photoreversible photochromic reactions in a homo-crystal of 1a and co-crystals 1a/Bz and 1a/Np. The absorption spectra of the photogenerated closed-ring isomers varied depending on the conformation of the diarylethene molecules packed in the crystals. The diarylethene 1a also formed 1:1 stoichiometric co-crystals with different kinds of diarylethenes, 1,2-bis(2-ethyl-5-phenyl-3-thienyl)perfluorocyclopentene (2a) and 1,2-bis[2-methyl-5-(1-naphthyl)-3-thienyl]perfluorocyclopentene (3a). Both co-crystals 1a/2a and 1a/3a showed photochromism. Although 1a, 2a, and 3a underwent efficient photocyclization reactions in their homo-crystals, highly selective photocyclization reactions of 2a or 3a were observed in the co-crystals. The selective reactions were confirmed by HPLC and X-ray crystallography. Excited energy transfers from 1a to 2a and from 1a to 3a are considered to occur and cause the selective reactions.

Conformational control and photoenolization of pyridine-3-carboxaldehydes in the solid state: stabilization of photoenols via hydrogen bonding and electronic control.

We have investigated the solid-state photobehavior of a broad set of pyridine-3-carboxaldehydes 1-5. The introduction of a heteroatom into mesitaldehydes as in aldehydes 1 raises the question of conformational preference in the solid state. The preferred conformations have been unequivocally established from X-ray crystal structure analyses of two of the aldehydes, 1c and 2c; it is shown that intramolecular hydrogen bonding could be utilized to achieve conformational control. In contrast to mesitaldehydes, which undergo efficient photocyclization to benzocyclobutenols in the solid state, the heteroatom analogues 1b and 1c exhibit a perceptible color change (from colorless to pale yellow for 1b and yellow-orange for 1c) upon UV irradiation; the color attributed to (E)-enols is persistent for several hours. Continued irradiation leads to an intractable polymeric material. The AM1 calculations, which have been reliably applied to the thermal cyclization of xylylenols to benzocyclobutenols, reveal that the (E)-enols of 1 are more stable than those of the mesitaldehydes relative to their corresponding benzocyclobutenols. The stabilization is interpreted as arising from the possibility of engaging the heteroatom in resonance delocalization. That the contribution from such a role of the nitrogen atom is so pronounced is elegantly demonstrated by forming the fluoroborate salts; 1a-HBF(4) and 1b-HBF(4) readily exhibit highly red-shifted absorption upon exposure to UV radiation as a result of stabilization of the photoenols. Notably, such a remarkable stabilization via electronic control of the photoenols is unprecedented. All of the 2-methoxy- and 2-chloro-substituted aldehydes 2-5 exhibit photochromism. Ab initio calculations show that the methoxy group in aldehydes 2 and 3 stabilizes the (E)-enols via O[bond]H...O hydrogen bonding as compared to those of 1 by 5-6 kcal/mol relative to their corresponding benzocyclobutenols. Thus, the presence of methoxy and halo groups at position 2 serves not only to direct the formyl oxygen toward the methyl group for H-abstraction but also to stabilize the (E)-enols.

Symmetry-enforced conformational control of photochemical reactivity in 2-vinyl-1,3-terphenyl.

The photocyclization of o-vinylbiphenyl to 9,10-dihydrophenanthrene occurs with very low quantum yield because of the low ground-state population of the reactive syn rotamer. 2-Vinyl-1,3-terphenyl exists as a single rotamer which undergoes highly efficient photocyclization. Irradiation at 77 K in a rigid glass permits observation of the 8a,9-dihydrophenanthrene which rearranges to the 9,10-dihydrophenanthrene upon warming of the glass. The barriers for photocyclization and the thermal sigmatropic hydrogen shift are both remarkably small.

Single electron transfer initiated photocyclization of substituted cinnamic acids to corresponding coumarins

Efficient photocyclization of substituted cinnamic acids to corresponding coumarins, initiated by single electron transfer processes, have been reported. A probable mechanism has been discussed.