Efficient Nucleating Agent Research Articles

Influence of functional group structures in nucleating agents on the crystallization behavior of poly(ethylene terephthalate)

AbstractNucleating agents are crucial for modifying semi‐crystalline polymers, but the impact of different end‐group structures on crystallization behavior remains unclear. This study synthesized succinic dihydrazide nucleating agents with various end groups (methyl, ethyl, and tert‐butyl) for PET composite materials. The tert‐butyl‐terminated nucleating agent showed the best performance, increasing the crystallization peak temperature to 203.8°C, crystallinity to 27.3%, and reducing half‐crystallization time to 2.8 min at 220°C. It also enhanced the impact strength to 47.2 kJ·m−2 and flexural modulus to 2623 MPa, while improving Vicat softening temperature and heat distortion temperature by 41 and 8°C, respectively. The results from FTIR and Raman Spectroscopy indicate that the interactions between the end groups of the nucleating agent and the CH bonds in the PET structure, the π–π interactions between the nucleating agent and the PET molecular structure, as well as the modulation of the PET chain conformation by the nucleating agent, are the primary factors contributing to the enhanced crystallinity of PET. This study provides a new approach for designing efficient nucleating agents for high‐performance materials.

Significantly enhanced crystallization of poly(L‐lactide) by incorporation of poly(D‐lactide) grafted cellulose nanocrystals

AbstractPoly(L‐lactic acid) (PLLA), as a green, biodegradable polymer material, has garnered considerable attention due to its ease of processing and exceptional properties. However, the inherent slow crystallization rate and brittleness of PLLA substantially restrict its extensive applications across various domains. In present work, PLLA and poly(D‐lactide) (PDLA)‐modified cellulose nanocrystals (CNCs), referred as CNC‐g‐L and CNC‐g‐D, are serving as nano‐fillers to enhance the crystallization rate of PLLA. Our findings demonstrate that both nano‐fillers could enhance the crystallization rate of PLLA, but the CNC‐g‐D shows a more efficient nucleation agent compared with its counterpart, CNC‐g‐L. Isothermal crystallization analysis indicates that CNC‐g‐D substantially increases nucleation density of PLLA, with pronounced crystallization at an elevated temperature of 155°C as confirmed by differential scanning calorimetry (DSC) and polarized optical microscopy (POM). Wide‐angle x‐ray diffraction (WAXD) analysis shows the preformation of stereocomplex crystals on the CNC‐g‐D surface may result in a fast crystallization rate. Meanwhile, after incorporation of different nano‐fillers, the toughness property of PLLA has also been significantly enhanced. Our result has shown the CNC‐g‐D could serve as an efficient nucleation agent toward PLLA and also facilitate to aiding in establishing comprehensive structure–property relationships of polymer materials.

Improvement of thermal, mechanical, and electromagnetic interference shielding properties of polyethylene nanocomposites by introducing non‐covalently modified carbon nanotube and reactive polyethylene copolymer

AbstractWe herein report the enhancement of thermal, electrical, electromagnetic interference (EMI) shielding, and mechanical performance of polyethylene (PE) nanocomposites by the introduction of non‐covalently modified multi‐walled carbon nanotube (MWCNT) and ethylene‐glycidyl methacrylate (EGMA) copolymer. For this purpose, benzylacetic acid‐functionalized MWCNT (BA‐M) is prepared by ball milling, and it is melt‐mixed with EGMA to prepare a masterbatch. The masterbatch is then melt‐compounded with neat PE to manufacture a series of PE/EGMA/BA‐M nanocomposites with 0.5–5 wt% MWCNTs. Electron microscopic and spectroscopic analyses confirm the successful fabrication of non‐covalently functionalized BA‐M, the uniform dispersity of MWCNTs in the PE matrix, and the chemical reactions between the carboxylic acid groups of BA‐M and the epoxy group of EGMA in the nanocomposites. Scanning calorimetric data reveals that BA‐M acts as an efficient nucleating agent for the crystallization of PE. The excellent dispersity and robust interfacial bonding of BA‐M in the PE matrix result in improved electrical and EMI shielding properties in PE/EGMA/BA‐M nanocomposites. Furthermore, the tensile strength, initial modulus, and impact strength of the nanocomposites gradually rise as the BA‐M content increases. Thus, the PE/EGMA/BA‐M nanocomposite containing 5 wt% MWCNT achieves excellent performance of EMI shielding effectiveness of ~14.7 dB/mm, tensile strength of ~34.5 MPa, initial modulus of ~295.7 MPa, and impact strength of ~539.9 J/m, which represent enhancements of ~265%, ~40%, ~82%, and ~452%, respectively, compared to pristine PE.Highlights Non‐covalently modified MWCNT (BA‐M) was prepared by facile ball milling. PE nanocomposites with BA‐M and EGMA were prepared by masterbatch melt‐mixing. Excellent dispersity and interfacial bonding of MWCNT in the PE matrix were attained. Tensile strength and initial modulus of the nanocomposites were highly improved. EMI shielding effectiveness of the nanocomposite with 5 wt% MWCNT was ~14.7 dB/mm.

Eco-friendly zinc-metal-organic framework as a nucleating agent for poly (lactic acid)

Eco-friendly poly(L-lactic acid) (PLA) can be made more versatile, and its crystallization rate is accelerated by adding Zinc-based metal-organic framework (Zn-MOF) particles. Using differential scanning calorimetry (DSC), the non-isothermal melt crystallization behavior of biodegradable PLA nucleated by 0.3 to 3 wt% of Zn-MOF was examined. The non-isothermal melt crystallization kinetics parameters were determined using a modified Avrami model and Mo approach. Zn-MOF dramatically accelerated the crystallization process, as evidenced by several non-isothermal crystallization metrics, including the crystallization half-time and crystallization rate constant. The melt crystallization temperatures of the PLA-Zn-MOF composites, with contents of 0.7 and 1 wt%, were increased by 21 °C compared to the neat PLA. Using the Friedman isoconversional kinetic method, the neat PLA and PLA-Zn-MOF composites' effective activation energy values, ∆E, were determined. The ∆E values of PLA-Zn-MOF from 0.3 to 1 wt% Zn-MOF composites were lower than that of neat PLA. Moreover, polarized optical microscopy revealed the formation of numerous small-sized PLA spherulites upon Zn-MOF addition. The results indicate that the Zn-MOF (at concentrations of 0.7 to 1.0 wt%) can be used as an efficient nucleating agent for PLA, where it increases the melt crystallization temperature, nucleation density, and crystallinity without changing the crystalline structure, while also significantly reduces the effective activation energy and the size of spherulites. Additionally, scanning electron microscopy confirms good dispersion of Zn-MOF (0.3 to 1 wt%) within the PLA matrix.

Effect of Nano Spinel Ferrites Co0.9Cu0.1Fe2O4 on Non-Isothermal Cold Crystallization Behaviours and Kinetics of Its Composites with Polylactic Acid.

Nanoparticles of spinel ferrites with a composition of Co0.9Cu0.1Fe2O4 (AM NPs) were effectively synthesized via a hydrothermal route. The structure of ferrite nanoparticles was characterized with X-ray diffraction, which showed a single cubic spinel phase. Energy-dispersive X-ray (EDX) spectroscopy and field emission-scanning electron microscopy (FE-SEM) were employed to analyse elemental composition and surface morphology, respectively. Moreover, the effects of the Co0.9Cu0.1Fe2O4 on the morphology of [PLA = polylactic acid] nanocomposites were examined through polarized light optical microscopy (POM) and X-ray diffraction (XRD). The thermal behaviours for tested samples were studied through [DSC = differential scanning calorimetry] and [TGA = thermal gravimetric analysis]. A great number of minor PLA spherulites were detected using POM in the presence of the Co0.9Cu0.1Fe2O4 ceramic magnetic nanoparticles (AM), increasing with AM nanoparticle contents. X-ray diffraction (XRD) analysis showed that the presence of nanoparticles led to an increase in the intensity of diffraction peaks. The DSC findings implied that the crystallization behaviours for the efficient PLA as well as its nanocomposites were affected by the addition of AM nanoparticles. They act as efficient nucleating agents because they shift the temperature of crystallization to a lower value. The Avrami models were used to analyse kinetics data. The experimental data were well described using the Avrami method for all samples tested. The addition of AM to the PLA matrix resulted in a decrease in the crystallization half-time t1/2 values, indicating a faster crystallization rate. TGA data showed that the occurrence of AM nanoparticles decreased the thermal stability of PLA.

Aromatic Amide-Based Hindered Amine Derivative as an Efficient Nucleation Agent for Polypropylene within Antiaging and Rechargeable Antibacterial Performances

Aromatic Amide-Based Hindered Amine Derivative as an Efficient Nucleation Agent for Polypropylene within Antiaging and Rechargeable Antibacterial Performances

The effect of poly(ethylene glycol) on the properties of poly (lactic acid)/silane-modified bacterial cellulose nanocomposites

ABSTRACT This study aimed to investigate the impact of poly (ethylene glycol) (PEG) on the properties of nanocomposites consisting of polylactic acid (PLA) and 3-aminopropyltriethoxysilane-modified bacterial cellulose (MBC) nanofibers. Differential scanning calorimetry (DSC) studies indicated that the presence of PEG enhanced the chain mobility of PLA during crystallization, thereby enabling the MBC to act as efficient nucleation agents. Furthermore, DSC and X-ray diffraction (XRD) analyses provided evidence for the formation of two distinct crystal structures, namely α and α,’ as well as various spherulitic dimensions. Finally, the toughening of PLA was occurred by adding PEG to PLA and ternary nanocomposites.

Exclusive stereocomplex crystallization of high-molecular-weight poly(l-lactide)/poly(d-lactide) blends enabled by nucleating agent

Stereocomplex-type polylactide (SC-PLA) has recently emerged as an up-and-coming engineering Bio-plastic because the SC crystallization between enantiomeric poly(l-lactide) (PLLA) and poly(d-lactide) (PDLA) can substantially enhance the heat resistance and hydrolytic stability. Unfortunately, it is exceedingly challenging for high-molecular-weight PLLA/PDLA blends to preferentially crystallize into SC crystals (SCs) during melt processing and the concomitant formation of homocrystals (HCs) causes a significant deterioration in physio-chemical properties of final products. Herein, a dibenzoylhydrazide compound has been utilized as an efficient nucleating agent (NA) for the SC crystallization of PLLA/PDLA blends. The results indicate that, in both non-isothermal and isothermal crystallizations, the SC crystallization is markedly promoted with the incorporation of 0.2–1.5 wt% NA. Specially, the enantiomeric blends with relatively high amounts (≥0.5 wt%) of NA are found to exclusively crystallize into SCs without any HCs formation. Meanwhile, the NA can accelerate the SC crystallization and reduce the crystal size. The preferential SC crystallization should be associated with the hydrogen-bonding interactions between PLAs and NA molecules, which could lower barriers for the nucleation and crystal growth of SCs. Our work provides a facile yet powerful strategy for the preparation of high-performance SC-PLA materials with exceptional SC crystallization ability.

Using an aromatic amide as nucleating agent to enhance the crystallization and dimensional stability of poly(3-hydroxybutyrate-co-3-hydroxyhexanate)

Biosynthesized poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) has emerged as a promising biodegradable polymer with a great potential to compete with traditional petroleum-based plastics, however, the poor crystallization ability makes it challenge to transform into high-performance products via common melt-processing methods. Herein, we demonstrate that N,N′-dicyclohexyl-2,6-naphthalenedicarboxamide (TMB) can serve as an efficient nucleating agent to significantly enhance the crystallization and resulting storage stability of PHBHHx. The results indicate that PHBHHx with small amounts of TMB (0.3–0.5 wt%) can crystallize completely even under a rapid cooling rate of 100 °C/min and the isothermal crystallization time is greatly reduced. As a result, the crystallinity of the injection-molded PHBHHx products is increased from 24.5 % to 39.5 %, without secondary crystallization after being stored at room temperature for 6 h. The products exhibit superior dimensional stability and the post-shrinkage can be decreased to as low as 0.1 %. Our work offers a feasible method to develop high-performance PHBHHx materials with remarkably enhanced crystallization ability.

Directed Gradients in the Excited-State Energy Landscape of Poly(3-hexylthiophene) Nanofibers.

Funneling excitation energy toward lower energy excited states is a key concept in photosynthesis, which is often realized with at most two chemically different types of pigment molecules. However, current synthetic approaches to establish energy funnels, or gradients, typically rely on Förster-type energy-transfer cascades along many chemically different molecules. Here, we demonstrate an elegant concept for a gradient in the excited-state energy landscape along micrometer-long supramolecular nanofibers based on the conjugated polymer poly(3-hexylthiophene), P3HT, as the single component. Precisely aligned P3HT nanofibers within a supramolecular superstructure are prepared by solution processing involving an efficient supramolecular nucleating agent. Employing hyperspectral imaging, we find that the lowest-energy exciton band edge continuously shifts to lower energies along the nanofibers' growth direction. We attribute this directed excited-state energy gradient to defect fractionation during nanofiber growth. Our concept provides guidelines for the design of supramolecular structures with an intrinsic energy gradient for nanophotonic applications.

A Kinetic Study on Crystallization in TiO2-SiO2-CaO-Al2O3 Glass under Nucleation Saturation Conditions for the High Value-Added Utilization of CaO-SiO2-Based Solid Wastes.

A kinetic study of the non-isothermal crystallization of CaO-SiO2-Al2O3-TiO2 glass was carried out using the Matusita-Sakka equation and differential thermal analysis. As starting materials, fine-particle glass samples (<58 µm), case defined as ''nucleation saturation'' (i.e., containing such a large number of nuclei that the nucleus number is invariable during the DTA process), became dense bulk glass-ceramics through heat treatment, demonstrating the strong heterogeneous nucleation phenomenon at the juncture of particle boundaries under "nucleation saturation" conditions. Three types of crystal phase are formed during the heat treatment process: CaSiO3, Ca3TiSi2(AlSiTi)3O14, and CaTiO3. As the TiO2 content increases, the main crystal shifts from CaSiO3 to Ca3TiSi2(AlSiTi)3O14. The EG values (activation energy of crystal growth) are in the 286-789 kJ/mol range. With increasing TiO2, EG initially decreases (the minimum appears at 14% TiO2), and then, increases. When added within 14%, TiO2 is shown to be an efficient nucleating agent that promotes the growth of wollastonite in a two-dimensional mechanism. As TiO2 further increases to exceed 18%, it is no longer just a nucleating agent but becomes one of the major components in the studied glass, so, in turn, it undermines the crystallization of wollastonite by forming Ti-bearing compounds, resulting in a tendency toward surface crystallization and higher activation energy of crystal growth. For glass samples with fine particles, it is important to note the "nucleation saturation" case for a better understanding of the crystallization process.

Heterogeneous Nucleation of High-Density Polyethylene Crystals on Graphene within Microdomains

In polymer processes, nucleating agents are often used to control the kinetics of crystallization, but their application remains largely a matter of trial and error. Thermodynamically, the efficiency of a nucleating agent can be quantified by the difference in substrate/crystal, crystal/melt, and substrate/melt interfacial energies, Δσ. In this work, the efficiency of graphene nanoplatelets (GNP) as nucleating agents for high-density polyethylene (HDPE) is investigated. HDPE nucleates and crystallizes rapidly, so Δσ can be especially difficult to measure experimentally. To overcome this difficulty, blends of HDPE+GNP are confined to microdomains so that crystallization becomes nucleation limited. Two methods of microdomain formation are employed. In the first, HDPE+GNP is melt-blended with an immiscible matrix of polystyrene (PS), and crystallization is characterized using differential scanning calorimetry (DSC); in the second, dispersions of HDPE+GNP in toluene are sprayed onto PS substrates, and crystallization is characterized with polarized optical microscopy (POM). Heterogeneous nucleation rates at several crystallization temperatures and for several GNP loadings were measured by these two methods and found to give excellent agreement across GNP loadings. The value of Δσ for HDPE+GNP is calculated to be 0.83 ± 0.18 erg/cm2. This value is only 2.8 times larger than that reported for HDPE nucleated heterogeneously on a HDPE fiber, a nearly ideal nucleating agent for HDPE, and much smaller than many of the best nucleating agents reported for other polymers. We conclude that GNP is an efficient nucleating agent for HDPE.

Heterogeneous Nucleation in Protein Crystallization.

Protein crystallization was first discovered in the nineteenth century and has been studied for nearly 200 years. Protein crystallization technology has recently been widely used in many fields, such as drug purification and protein structure analysis. The key to successful crystallization of proteins is the nucleation in the protein solution, which can be influenced by many factors, such as the precipitating agent, temperature, solution concentration, pH, etc., among which the role of the precipitating agent is extremely important. In this regard, we summarize the nucleation theory of protein crystallization, including classical nucleation theory, two-step nucleation theory, and heterogeneous nucleation theory. We focus on a variety of efficient heterogeneous nucleating agents and crystallization methods as well. The application of protein crystals in crystallography and biopharmaceutical fields is further discussed. Finally, the bottleneck of protein crystallization and the prospect of future technology development are reviewed.

Effect of PGMA-saponite brushes on the rheology, crystallization and supercritical CO2 foaming behavior of poly(lactic acid)

In this work, poly(glycidyl methacrylate) (PGMA) were grafted onto the surface of saponite to form polymer brushes (m@g-Sap) via surface-initiated atom transfer radical polymerization (SI-ATRP). Moreover, PLA/m@g-Sap nanocomposites foams were prepared by supercritical carbon dioxide foaming with m@g-Sap as fillers. And its comprehensive performance, structure-properties relationship were investigated. It was shown that m@g-Sap as an efficient nucleating agent enhanced the rheological properties, crystallization behavior and foamability of PLA. The pore density of PLA4 (PLA/m@g-Sap (0.7 wt%) nanocomposites foams) is increased by 3 orders of magnitude and its average pore size is reduced by 84.94%. Furthermore, the unique intercalation structure and branched interpenetration network structure of m@g-Sap effectively improved the compression resistance of PLA based nanocomposites foams. Compared with pure PLA foam, the compressive strength of PLA4 platform region increased by 282%. Finally, what's more, the results of simultaneous rheological and in situ IR, molecular dynamics simulations indicate that there was a significant interaction between m@g-Sap and PLA and CO2, which in turn enhanced the melt strength of PLA based nanocomposites and induced the rapid crystallization of PLA. The above results demonstrated that m@g-Sap had great potential to improve the foaming behavior of PLA.

Nucleation of jet engine oil vapours is a large source of aviation-related ultrafine particles

Large airports are a major source of ultrafine particles, which spread across densely populated residential areas, affecting air quality and human health. Jet engine lubrication oils are detectable in aviation-related ultrafine particles, however, their role in particle formation and growth remains unclear. Here we show the volatility and new-particle-formation ability of a common synthetic jet oil, and the quantified oil fraction in ambient ultrafine particles downwind of Frankfurt International Airport, Germany. We find that the oil mass fraction is largest in the smallest particles (10-18 nm) with 21% on average. Combining ambient particle-phase concentration and volatility of the jet oil compounds, we determine a lower-limit saturation ratio larger than 1 × 105 for ultra-low volatility organic compounds. This indicates that the oil is an efficient nucleation agent. Our results demonstrate that jet oil nucleation is an important mechanism that can explain the abundant observations of high number concentrations of non-refractory ultrafine particles near airports.

Fabrication of functional and biodegradable scaffolds using nucleated poly(4-hydroxybutyrate) via 3D printing for bone tissue engineering

Poly (4-hydroxybutyrate) (P4HB) was a new generation of biosourced and biodegradable semi-crystalline polymer. However, due to the low crystallization temperature and slow crystallization rate of P4HB, there were problems such as insufficient cooling and product collapse during the 3D printing. The additive of biocompatible nucleating agents is one of the most effective means to promote the crystallization. Therefore, it was studied that the crystallization behavior and morphology of biodegradable P4HB were influenced by the zinc salt of d-phenylalanine (Zn(D-Phe)2) and cyanuric acid (CA) as efficient nucleating agents respectively. The addition of 2% Zn(D-Phe)2 and 0.6% CA could effectively increase the crystallization temperature, crystallization rate and nucleation density of P4HB spherulites, without damaging the crystal structure. Then, the bone tissue engineering scaffolds were prepared through 3D printing by the nucleated P4HB. The tensile strengths of P4HB/Zn(D-Phe)2 and P4HB/CA samples prepared by 3D printing were 33.4 MPa and 27.2 MPa, with the elongation at break of 449% and 370%, respectively, which fully met the requirements of bone tissue engineering on the mechanical properties of scaffolds. The results of biological property test showed that the P4HB were ideal scaffolds materials with good biological activity and biocompatibility.

Structural, thermal and dielectric properties of 2D layered Ti3C2Tx (MXene) filled poly (ethylene‐co‐methyl acrylate) (EMA) nanocomposites

AbstractLight‐weight and flexible 2D MXene‐based polymer materials with low dielectric loss and high dielectric constant have drawn great attention in the power systems and modern electronic field. A series of Ti3C2Tx/EMA composites were fabricated via simple solution casting followed by a compression molding method with various mass concentrations of Ti3C2Tx (0, 1, 3, 5, 8, 10, 12, and 15 wt%). Morphological and micro structural properties of the prepared composites were studied via X‐ray diffraction (XRD) and field‐emission scanning electron microscope (FESEM), where the distribution of Ti3C2Tx in the Ti3C2Tx/EMA composites was confirmed. Thermal behaviors were analyzed by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) investigations. The DSC analysis reveals that the % of crystallinity decreases from 11.06 with 1 wt% to 5.68 with 15 wt%, where Ti3C2Tx acts as an efficient nucleating agent. TGA data confirm the enhancement of the thermal stability of the composites upon increasing in Ti3C2Tx loading. The room temperature electrical and dielectric behavior of the studied composites were examined in the frequency range of 100 Hz–5 MHz. In this work, the 10 wt% of Ti3C2Tx loaded poly (ethylene‐co‐methyl acrylate) composite (EMA) showed higher dielectric permittivity (ε′ = 124.22) with lower dissipation loss (tan δ = 0.051) at 100 Hz among all weight percentages. The behavior of charge carriers in the prepared composites was studied by utilizing the impedance spectroscopy technique. The electrical parameters were calculated from the fitted Nyquist plots with a corresponding circuit model. I–V curves confirmed the conduction mechanisms of the composites. This beneficial enhancement in electrical properties recommends the composite can be utilized in flexible electronic storage devices.

Fully biodegradable Poly(butylene succinate-co-1,2-decylene succinate)/Cellulose nanocrystals composites with significantly enhanced crystallization and mechanical property*

Poly (butylene succinate-co-1,2-decylene succinate) (PBDS) is a promising biodegradable polyester with n-octyl being the side group (Polymer 2021, 213, 123197). The toughness of PBDS is significantly higher than that of linear poly (butylene succinate) (PBS), while the tensile strength and crystallization rate of PBDS are remarkably lower than those of PBS. In this research, fully biodegradable PBDS/cellulose nanocrystals (CNC) composites were prepared at low CNC loadings with the aim of improving the crystallization and mechanical properties. The surface morphology study suggested CNC achieved an even distribution in PBDS. As an efficient heterogeneous nucleating agent, CNC obviously enhanced the nonisothermal melt crystallization behavior and isothermal melt crystallization kinetics of PBDS, as evidenced by the upward shift of melt crystallization temperature and shorter crystallization half-time. Both the nucleation activity and nucleation efficiency of CNC were quantitively evaluated, which were 0.40 and 44.9%, respectively, at a CNC loading of 2 wt%. CNC did not change the crystallization mechanism and crystal structure of PBDS. The mechanical properties study indicated that the tensile mechanical properties (Young's modulus and tensile strength from the tensile test) and storage modulus (from dynamic mechanical analysis) of PBDS were obviously enhanced by CNC, indicating the reinforcement effect.

Stretchable, Breathable, and Stable Lead-Free Perovskite/Polymer Nanofiber Composite for Hybrid Triboelectric and Piezoelectric Energy Harvesting.

Halide-perovskite-based mechanical energy harvesters display excellent electrical output due to their unique ferroelectricity and dielectricity. However, their high toxicity and moisture sensitivity impede their practical applications. Herein, a stretchable, breathable, and stable nanofiber composite (LPPS-NFC) is fabricated through electrospinning of lead-free perovskite/poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) and styrene-ethylene-butylene-styrene (SEBS). The Cs3 Bi2 Br9 perovskites serve as efficient electron acceptors and local nucleating agents for the crystallization of polymer chains, thereby enhancing the electron-trapping capacity and polar crystalline phase in LPPS-NFC. The excellent energy level matching between Cs3 Bi2 Br9 and PVDF-HFP boosts the electron transfer efficiency and reduces the charge loss, thereby promoting the electron-trapping process. Consequently, this LPPS-NFC-based energy harvester displays an excellent electrical output (400V, 1.63 µA cm-2 , and 2.34 W m-2 ), setting a record of the output voltage among halide-perovskite-based nanogenerators. The LPPS-NFC also exhibits excellent stretchability, waterproofness, and breathability, enabling the fabrication of robust wearable devices that convert mechanical energy from different biomechanical motions into electrical power to drive common electronic devices. The LPPS-NFC-based energy harvesters also endure extreme mechanical deformations (washing, folding, and crumpling) without performance degradation, and maintain stable electrical output up to 5 months, demonstrating their promising potential for use as smart textiles and wearable power sources.

Significantly Enhanced Crystallization of Poly(ethylene succinate-co-1,2-propylene succinate) by Cellulose Nanocrystals as an Efficient Nucleating Agent.

Poly(ethylene succinate-co-1,2-propylene succinate) (PEPS) is a novel aliphatic biodegradable polyester with good mechanical properties. Due to the presence of methyl as a side group, the crystallization rate of PEPS is remarkably slower than that of the poly(ethylene succinate) homopolymer. To promote the potential application of PEPS, the effect of cellulose nanocrystals (CNC) on the crystallization behavior, crystalline morphology, and crystal structure of PEPS was investigated in this research with the aim of increasing the crystallization rate. CNC enhanced both the melt crystallization behavior of PEPS during the cooling process and the overall crystallization rate during the isothermal crystallization process. The crystallization rate of PEPS became faster with an increase in CNC content. The crystalline morphology study directly confirmed the heterogeneous nucleating agent role of CNC. The crystal structure of PEPS remained unchanged in the composites. On the basis of the interfacial energy, the nucleation mechanism of PEPS in the composites was further discussed by taking into consideration the induction of CNC.