Efficient Genome Editing Method Research Articles

Fast and efficient CRISPR-mediated genome editing in Aureobasidium using Cas9 ribonucleoproteins

Species of the genus Aureobasidium are ubiquitous, polyextremotolerant, “yeast-like” ascomycetes used for the industrial production of pullulan and other products and as biocontrol agents in agriculture. Their application potential and wide-spread occurrence make Aureobasidium spp. interesting study objects. The availability of a fast and efficient genome editing method is an obvious advantage for future basic and applied research on Aureobasidium. In this study, we describe the development of a CRISPR/Cas9-based genome editing method using ribonucleoproteins (RNPs) in A. pullulans and A. melanogenum. We demonstrate that this method can be used for single and multiplex genome editing using only RNPs by targeting URA3 (encoding for orotidine-5′-phosphate decarboxylase), ADE2 (encoding for phosphoribosylaminoimidazole carboxylase) and ARG4 (encoding for argininosuccinate lyase). We demonstrate the applicability of Trichoderma reesei pyr4 and Aspergillus fumigatus pyrG to complement the URA3 deficiency. Further, we show that using RNPs improves the homologous recombination rate and 20 bp long homologous flanks are sufficient. Therefore, the repair cassettes can be constructed by a single PCR, abolishing the need for laborious and time-consuming cloning, which is necessary for previously described methods for CRISPR-mediated genome editing in these fungi. The here presented method allows fast and efficient genome editing for gene deletions, modifications, and insertions in Auresobasidium with a minimized risk of off-target effects.

NT-CRISPR, combining natural transformation and CRISPR-Cas9 counterselection for markerless and scarless genome editing in Vibrio natriegens

The fast-growing bacterium Vibrio natriegens has recently gained increasing attention as a novel chassis organism for fundamental research and biotechnology. To fully harness the potential of this bacterium, highly efficient genome editing methods are indispensable to create strains tailored for specific applications. V. natriegens is able to take up free DNA and incorporate it into its genome by homologous recombination. This highly efficient natural transformation is able to mediate uptake of multiple DNA fragments, thereby allowing for multiple simultaneous edits. Here, we describe NT-CRISPR, a combination of natural transformation with CRISPR-Cas9 counterselection. In two temporally distinct steps, we first performed a genome edit by natural transformation and second, induced CRISPR-Cas9 targeting the wild type sequence, and thus leading to death of non-edited cells. Through cell killing with efficiencies of up to 99.999%, integration of antibiotic resistance markers became dispensable, enabling scarless and markerless edits with single-base precision. We used NT-CRISPR for deletions, integrations and single-base modifications with editing efficiencies of up to 100%. Further, we confirmed its applicability for simultaneous deletion of multiple chromosomal regions. Lastly, we showed that the near PAM-less Cas9 variant SpG Cas9 is compatible with NT-CRISPR and thereby broadens the target spectrum.

A Novel and Efficient Genome Editing Tool Assisted by CRISPR-Cas12a/Cpf1 for Pichia pastoris.

Pichia pastoris has been widely exploited for the heterologous expression of proteins in both industry and academia. Recently, it has been shown to be a potentially good chassis host for the production of high-value chemicals and pharmaceuticals. Effective synthetic biology tools for genetic engineering are essential for industrial and biotechnological research in this yeast. Here, we describe a novel and efficient genome editing method mediated by the CRISPR-Cpf1 system, which could facilitate the deletion of large DNA fragments and integration of multiplexed gene fragments. The CRISPR-Cpf1 system exhibited a precise and high editing efficiency for single-gene disruption (99 ± 0.8%), duplex genome editing (65 ± 2.5% to 80 ± 3%), and triplex genome editing (30 ± 2.5%). In addition, the deletion of large DNA fragments of 20kb and one-step integration of multiple genes were first achieved using the developed CRISPR-Cpf1 system. Taken together, this study provides an efficient and simple gene editing tool for P.pastoris. The novel multiloci gene integration method mediated by CRISPR-Cpf1 may accelerate the ability to engineer this methylotrophic yeast for metabolic engineering and genome evolution in both biotechnological and biomedical applications.

A SacB-based system for diverse and multiple genome editing in Gluconobacter oxydans

Gluconobacter oxydans is an important industrial bacterial strain widely used to produce a lot of useful products. However, very few gene editing tools are available for G. oxydans. This study aimed to develop an efficient genome editing method for G. oxydans using SacB as a counter-selectable marker. A plasmid that could express the kanamycin resistance gene in both E. coli and G. oxydans was constructed using the screened shuttle promoter P116. After optimizing the genome editing conditions, the derivative plasmids could be effectively utilized for diverse genome editing, such as gene deletion, insertion, replacement, and in situ modification in G. oxydans WSH-003. In addition, the SacB-based system also achieved multiple gene editing in G. oxydans. Moreover, the genome of the industrial strain G. oxydans WSH-003 was modified and the growth rate and substrate conversion rate of the strain successfully increased using this system. The system could also have potential to be applied in different G. oxydans strains. The process established in this study also provides a reference for constructing genetic tools for many other genetically recalcitrant bacteria.

Characterizing the portability of phage-encoded homologous recombination proteins.

Efficient genome editing methods are essential for biotechnology and fundamental research. Homologous recombination (HR) is the most versatile method of genome editing, but techniques that rely on host RecA-mediated pathways are inefficient and laborious. Phage-encoded ssDNA annealing proteins (SSAPs) improve HR 1000-fold above endogenous levels; however, they are not broadly functional. Using Escherichia coli, Lactococcus lactis, Mycobacterium smegmatis, Lactobacillus rhamnosus, and Caulobacter crescentus we investigated the limited portability of SSAPs. We find that these proteins specifically recognize the C-terminal tail of the host’s single-stranded DNA-binding protein (SSB), and are portable between species if compatibility with this host domain is maintained. Furthermore, we find that co-expressing SSAPs with a paired SSB can significantly improve activity, in some species enabling SSAP functionality even without host-compatibility. Finally, we find that high-efficiency HR far surpasses the mutational capacity of commonly used random mutagenesis methods, generating exceptional phenotypes inaccessible through sequential nucleotide conversions.

Genome editing in the fall armyworm, Spodoptera frugiperda: Multiple sgRNA/Cas9 method for identification of knockouts in one generation

The CRISPR/Cas9 system is an efficient genome editing method that can be used in functional genomics research. The fall armyworm, Spodoptera frugiperda, is a serious agricultural pest that has spread over most of the world. However, very little information is available on functional genomics for this insect. We performed CRISPR/Cas9-mediated site-specific mutagenesis of three target genes: two marker genes [Biogenesis of lysosome-related organelles complex 1 subunit 2 (BLOS2) and tryptophan 2, 3-dioxygenase (TO)], and a developmental gene, E93 (a key ecdysone-induced transcription factor that promotes adult development). The knockouts (KO) of BLOS2, TO and E93 induced translucent mosaic integument, olive eye color, and larval-pupal intermediate phenotypes, respectively. Sequencing RNA isolated from wild-type and E93 KO insects showed that E93 promotes adult development by influencing the expression of the genes coding for transcription factor, Krüppel homolog 1, the pupal specifier, Broad-Complex, serine proteases, and heat shock proteins. Often, gene-edited insects display mosaicism in which only a fraction of the cells are edited as intended, and establishing a homozygous line is both costly and time-consuming. To overcome these limitations, a method to completely KO the target gene in S. frugiperda by injecting the Cas9 protein and multiple sgRNAs targeting one exon of the E93 gene into embryos was developed. Ten percent of the G0 larvae exhibited larval-pupal intermediates. The mutations were confirmed by T7E1 assay, and the mutation frequency was determined as >80%. Complete KO of the E93 gene was achieved in one generation using the multiple sgRNA method, demonstrating a powerful approach to improve genome editing in lepidopteran and other non-model insects.

Reconstitution of biosynthetic machinery of fungal natural products in heterologous hosts.

Ascomycota and basidiomycota fungi are prolific sources of biologically active natural products. Recent genomic data and bioinformatic analysis indicate that fungi possess a large number of biosynthetic gene clusters for bioactive natural products but more than 90% are silent. Heterologous expression in the filamentous fungi as hosts is one of the powerful tools to expression of the silent gene clusters. This review introduces recent studies on the total biosynthesis of representative family members via common platform intermediates, genome mining of novel di- and sesterterpenoids including detailed cyclization pathway, and development of expression host for basidiomycota genes with efficient genome editing method. In addition, this review will discuss the several strategies, for the generation of structural diversity, which are found through these studies.

Electroporation of AsCpf1/RNP at the Zygote Stage is an Efficient Genome Editing Method to Generate Knock-Out Mice Deficient in Leukemia Inhibitory Factor.

CRISPR/Cpf1 is a class II, type V RNA-guided endonuclease that is distinct from the type II CRISPR/Cas9 nuclease, widely used for genome editing. Cpf1 is a smaller and simpler endonuclease than Cas9, overcoming some limitations of the CRISPR/Cas9 system. The applications of CRISPR to rodent embryos for the production of knock-out (KO) mice have been achieved mainly by microinjection, which requires heavily-equipped instruments with skillful hands. Here, we evaluated the genome editing efficiency between Cpf1/mRNA and Cpf1/ribonuclear protein (RNP) in mouse embryos, and established an easy, fast, and technically less demanding method to produce KO mice using electroporation of the Cfp1/RNP system. The efficiency of electroporation-based delivery of AsCpf1/mRNA and AsCpf1/RNP to target exon 3 of leukemia inhibitory factor (Lif) into mouse zygotes was evaluated. Embryos that developed to the two-cell stage after zygote electroporation were transferred into the oviducts of surrogate mothers to produce AsCpf1-mediated LIF KO mice. The genome editing efficiency of blastocysts and pups was tested using the T7E1 assay and/or DNA sequencing. Congenital abnormalities and reproductive phenotypes in LIF KO mice produced by electroporation with AsCpf1/RNP were examined. Survival and two-cell development of electroporated zygotes were comparable between the AsCpf1/mRNA and AsCpf1/RNP groups, whereas genome editing efficiency was relatively higher in the AsCpf1/RNP group (13.3% vs 18.1% at blastocyst and 33.3% vs 45.5% at offspring), respectively. Two mouse lines with a frameshift mutation in exon 3 of the Lif gene were established from the AsCpf1/RNP group. All congenital abnormalities of LIF KO mice produced by AsCpf1/RNP electroporation were observed. AsCpf1-mediated LIF KO mice showed postnatal growth retardation and implantation failure, both of which are major phenotypes of LIF KO mice generated by conventional gene targeting. Electroporation of AsCpf1/RNP at the zygote stage is an efficient genome editing method to produce KO mice.

Genome editing of Ralstonia eutropha using an electroporation-based CRISPR-Cas9 technique.

BackgroundRalstonia eutropha is an important bacterium for the study of polyhydroxyalkanoates (PHAs) synthesis and CO2 fixation, which makes it a potential strain for industrial PHA production and attractive host for CO2 conversion. Although the bacterium is not recalcitrant to genetic manipulation, current methods for genome editing based on group II introns or single crossover integration of a suicide plasmid are inefficient and time-consuming, which limits the genetic engineering of this organism. Thus, developing an efficient and convenient method for R. eutropha genome editing is imperative.ResultsAn efficient genome editing method for R. eutropha was developed using an electroporation-based CRISPR-Cas9 technique. In our study, the electroporation efficiency of R. eutropha was found to be limited by its restriction-modification (RM) systems. By searching the putative RM systems in R. eutropha H16 using REBASE database and comparing with that in E. coli MG1655, five putative restriction endonuclease genes which are related to the RM systems in R. eutropha were predicated and disrupted. It was found that deletion of H16_A0006 and H16_A0008-9 increased the electroporation efficiency 1658 and 4 times, respectively. Fructose was found to reduce the leaky expression of the arabinose-inducible pBAD promoter, which was used to optimize the expression of cas9, enabling genome editing via homologous recombination based on CRISPR-Cas9 in R. eutropha. A total of five genes were edited with efficiencies ranging from 78.3 to 100%. The CRISPR-Cpf1 system and the non-homologous end joining mechanism were also investigated, but failed to yield edited strains.ConclusionsWe present the first genome editing method for R. eutropha using an electroporation-based CRISPR-Cas9 approach, which significantly increased the efficiency and decreased time to manipulate this facultative chemolithoautotrophic microbe. The novel technique will facilitate more advanced researches and applications of R. eutropha for PHA production and CO2 conversion.

Development of an Efficient Genome Editing Tool in Bacillus licheniformis Using CRISPR-Cas9 Nickase.

Bacillus strains are important industrial bacteria that can produce various biochemical products. However, low transformation efficiencies and a lack of effective genome editing tools have hindered its widespread application. Recently, clustered regularly interspaced short palindromic repeat (CRISPR)-Cas9 techniques have been utilized in many organisms as genome editing tools because of their high efficiency and easy manipulation. In this study, an efficient genome editing method was developed for Bacillus licheniformis using a CRISPR-Cas9 nickase integrated into the genome of B. licheniformis DW2 with overexpression driven by the P43 promoter. The yvmC gene was deleted using the CRISPR-Cas9n technique with homology arms of 1.0 kb as a representative example, and an efficiency of 100% was achieved. In addition, two genes were simultaneously disrupted with an efficiency of 11.6%, and the large DNA fragment bacABC (42.7 kb) was deleted with an efficiency of 79.0%. Furthermore, the heterologous reporter gene aprN, which codes for nattokinase in Bacillus subtilis, was inserted into the chromosome of B. licheniformis with an efficiency of 76.5%. The activity of nattokinase in the DWc9nΔ7/pP43SNT-SsacC strain reached 59.7 fibrinolytic units (FU)/ml, which was 25.7% higher than that of DWc9n/pP43SNT-SsacC Finally, the engineered strain DWc9nΔ7 (Δepr ΔwprA Δmpr ΔaprE Δvpr ΔbprA ΔbacABC), with multiple disrupted genes, was constructed using the CRISPR-Cas9n technique. Taken together, we have developed an efficient genome editing tool based on CRISPR-Cas9n in B. licheniformis This tool could be applied to strain improvement for future research.IMPORTANCE As important industrial bacteria, Bacillus strains have attracted significant attention due to their production of biological products. However, genetic manipulation of these bacteria is difficult. The CRISPR-Cas9 system has been applied to genome editing in some bacteria, and CRISPR-Cas9n was proven to be an efficient and precise tool in previous reports. The significance of our research is the development of an efficient, more precise, and systematic genome editing method for single-gene deletion, multiple-gene disruption, large DNA fragment deletion, and single-gene integration in Bacillus licheniformis via Cas9 nickase. We also applied this method to the genetic engineering of the host strain for protein expression.

Tagging to endogenous genes of Plasmodium falciparum using CRISPR/Cas9

BackgroundPlasmodium falciparum is the deadliest malaria parasite. Currently, there are seldom commercial antibodies against P. falciparum proteins, which greatly limits the study on Plasmodium. CRISPR/Cas9 is an efficient genome editing method, which has been employed in various organisms. However, the use of this technique in P. falciparum is still limited to gene knockout, site-specific mutation and generation of green fluorescent protein (GFP) reporter line with disruption of inserted sites.ResultsWe have adapted the CRISPR/Cas9 system to add commercial tag sequences to endogenous genes of P. falciparum. To add HA or HA-TY1 tags to ck2β1, ck2α and stk, pL6cs-hDHFR-ck2β1/ck2α/stk was constructed, which contained sequences of tags, specific homologous arms, and sgRNA. The P. falciparum 3D7 strain was subsequently transfected with pUF1-BSD-Cas9 and pL6cs-hDHFR-ck2β1/ck2α/stk plasmids via electroporation. After that, BSD and WR99210 drugs were added to the culture to screen parasites containing both plasmids. Twenty days after electroporation, live parasites appeared and were collected to check the tagging by PCR, DNA sequencing, Western blotting and immuno-fluorescence assays. The results showed that the tags were successfully integrated into the C-terminus of these three proteins.ConclusionsWe have improved the method to integrate tags to Plasmodium falciparum genes using the CRISPR/Cas9 method, which lays the foundation for further study of Plasmodium falciparum at the molecular level.

Efficient DNA-free genome editing of bread wheat using CRISPR/Cas9 ribonucleoprotein complexes

Substantial efforts are being made to optimize the CRISPR/Cas9 system for precision crop breeding. The avoidance of transgene integration and reduction of off-target mutations are the most important targets for optimization. Here, we describe an efficient genome editing method for bread wheat using CRISPR/Cas9 ribonucleoproteins (RNPs). Starting from RNP preparation, the whole protocol takes only seven to nine weeks, with four to five independent mutants produced from 100 immature wheat embryos. Deep sequencing reveals that the chance of off-target mutations in wheat cells is much lower in RNP mediated genome editing than in editing with CRISPR/Cas9 DNA. Consistent with this finding, no off-target mutations are detected in the mutant plants. Because no foreign DNA is used in CRISPR/Cas9 RNP mediated genome editing, the mutants obtained are completely transgene free. This method may be widely applicable for producing genome edited crop plants and has a good prospect of being commercialized.

Efficient and transgene-free genome editing in wheat through transient expression of CRISPR/Cas9 DNA or RNA

Editing plant genomes is technically challenging in hard-to-transform plants and usually involves transgenic intermediates, which causes regulatory concerns. Here we report two simple and efficient genome-editing methods in which plants are regenerated from callus cells transiently expressing CRISPR/Cas9 introduced as DNA or RNA. This transient expression-based genome-editing system is highly efficient and specific for producing transgene-free and homozygous wheat mutants in the T0 generation. We demonstrate our protocol to edit genes in hexaploid bread wheat and tetraploid durum wheat, and show that we are able to generate mutants with no detectable transgenes. Our methods may be applicable to other plant species, thus offering the potential to accelerate basic and applied plant genome-engineering research.

Multigene disruption in undomesticated Bacillus subtilis ATCC 6051a using the CRISPR/Cas9 system.

Bacillus subtilis ATCC 6051a is an undomesticated strain used in the industrial production of enzymes. Because it is poorly transformable, genetic manipulation in this strain requires a highly efficient genome editing method. In this study, a Streptococcus pyogenes CRISPR/Cas9 system consisting of an all-in-one knockout plasmid containing a target-specific guide RNA, cas9, and a homologous repair template was established for highly efficient gene disruption in B. subtilis ATCC 6051a. With an efficiency of 33% to 53%, this system was used to disrupt the srfC, spoIIAC, nprE, aprE and amyE genes of B. subtilis ATCC 6051a, which hamper its use in industrial fermentation. Compared with B. subtilis ATCC 6051a, the final mutant, BS5 (ΔsrfC, ΔspoIIAC, ΔnprE, ΔaprE, ΔamyE), produces much less foam during fermentation, displays greater resistant to spore formation, and secretes 2.5-fold more β-cyclodextrin glycosyltransferase into the fermentation medium. Thus, the CRISPR/Cas9 system proved to be a powerful tool for targeted genome editing in an industrially relevant, poorly transformable strain.

Development of an Efficient Genome Editing Method by CRISPR/Cas9 in a Fish Cell Line.

CRISPR/Cas9 system has been used widely in animals and plants to direct mutagenesis. To date, no such method exists for fish somatic cell lines. We describe an efficient procedure for genome editing in the Chinook salmon Oncorhynchus tshawytscha CHSE. This cell line was genetically modified to firstly overexpress a monomeric form of EGFP (cell line CHSE-E Geneticin resistant) and additionally to overexpress nCas9n, a nuclear version of Cas9 (cell line CHSE-EC, Hygromycin and Geneticin resistant). A pre-validated sgRNA was produced in vitro and used to transfect CHSE-EC cells. The EGFP gene was disrupted in 34.6 % of cells, as estimated by FACS and microscopy. The targeted locus was characterised by PCR amplification, cloning and sequencing of PCR products; inactivation of the EGFP gene by deletions in the expected site was validated in 25 % of clones. This method opens perspectives for functional genomic studies compatible with high-throughput screening.

Single-Cell-State Culture of Human Pluripotent Stem Cells Increases Transfection Efficiency

Human pluripotent stem cells (hPSCs), such as human embryonic stem cells (hESCs) and human induced pluripotent stem cells (hiPSCs), have the potential to self-renew indefinitely and differentiate into various cell types. hPSCs can differentiate into various stem or progenitor cell populations used for regenerative medicine and drug development. Newly developed genome editing technology has advanced the use of hPSCs for such purposes. However, to fully utilize hPSCs to achieve this goal, more efficient gene transfer methods under defined conditions are required.Development of efficient genome editing methods, such as zinc-finger nucleases (ZFNs), transcription activator-like effector nucleases (TALENs), and clustered regularly interspaced short palindromic repeat (CRISPR)/CRISPR-associated nuclease 9 (Cas9), for use in hPSCs holds great promise in the fields of basic and clinical research. Among these methods, TALENs are more efficient and safer for use in hPSCs to achieve specific gene editing, as ZFNs had a low gene editing efficiency and CRISPR/Cas9 was accompanied by more severe off-target effects than TALENs. Electroporation is a widely used transfection method for hPSC genome editing; however, this method results in reduced cell viability and gene editing efficiency.In the past decade, various methods were developed for gene transfer into hPSCs; however, hPSCs form tightly packed colonies, making gene transfer difficult. In this study, we established a culture method of hPSCs at a single-cell-state to reduce cell density, and investigated gene transfection efficiency followed by gene editing efficiency. hPSCs cultured in a single-cell-state were transfected using non-liposomal transfection reagents with plasmid DNA driven by the human elongation factor 1-alpha 1 (EF1α) promoter or mRNA encoding enhanced green fluorescent protein (eGFP). The proportion of eGFP+ cells considerably increased in single-cell-state cultures (DNA: 95.80 ± 2.51%, mRNA: 99.70 ± 0.10%). Moreover, most of the cells were viable (control: 93.10 ± 0.40%, DNA: 83.40 ± 2.03%, mRNA: 86.71 ± 0.19%). The mean fluorescence intensity (MFI) was approximately three-fold higher than that in cells transfected by electroporation (electroporation (EPN): 6631 ± 992; transfection (TFN): 17933 ± 1595). eGFP expression was detected by fluorescence microscopy until day seven post-transfection. Our results also demonstrate an inverse correlation between cell density and transfection efficiency. To test whether transfection using this method affected the "stemness" of hPSCs, we examined SSEA4 and NANOG expression in eGFP-transfected cells by flow cytometry analysis. The percentage of both SSEA4+ and NANOG+ cells was greater than 90%. Moreover, transplantation of eGFP-transfected cells into immunodeficient mice led to the formation of teratomas. These results strongly suggested that single-cell-state hPSC culture improved transfection efficiency without inducing differentiation or loss of pluripotency.Moreover, we used our efficient transfection method to edit the hPSC genome using TALENs. We constructed a Platinum TALEN driven by the EF1α promoter targeting the adenomatous polyposis coli (APC) gene and analyzed the efficiency of gene editing using the Cel-1 assay. Our efficient transfection method induced mutations more efficiently than electroporation (Transfection: 11.1 ± 1.38%, Electroporation: 3.2 ± 0.89). These results showed that TALENs increased gene editing efficiency in single-cell-state hPSC cultures.Overall, our efficient hPSC transfection method using single-cell-state culture provides an excellent experimental system to investigate the full potential of hPSCs. We expect that this method may contribute to the fields of hPSC-based regenerative medicine and drug discovery. DisclosuresNo relevant conflicts of interest to declare.

CRISPRz: a database of zebrafish validated sgRNAs.

CRISPRz (http://research.nhgri.nih.gov/CRISPRz/) is a database of CRISPR/Cas9 target sequences that have been experimentally validated in zebrafish. Programmable RNA-guided CRISPR/Cas9 has recently emerged as a simple and efficient genome editing method in various cell types and organisms, including zebrafish. Because the technique is so easy and efficient in zebrafish, the most valuable asset is no longer a mutated fish (which has distribution challenges), but rather a CRISPR/Cas9 target sequence to the gene confirmed to have high mutagenic efficiency. With a highly active CRISPR target, a mutant fish can be quickly replicated in any genetic background anywhere in the world. However, sgRNA's vary widely in their activity and models for predicting target activity are imperfect. Thus, it is very useful to collect in one place validated CRISPR target sequences with their relative mutagenic activities. A researcher could then select a target of interest in the database with an expected activity. Here, we report the development of CRISPRz, a database of validated zebrafish CRISPR target sites collected from published sources, as well as from our own in-house large-scale mutagenesis project. CRISPRz can be searched using multiple inputs such as ZFIN IDs, accession number, UniGene ID, or gene symbols from zebrafish, human and mouse.