V2O5-MoO3/TiO2 catalyst modified by Mg was studied to obtain higher NOx SCR activity and higher P, SO2, and H2O resistance than the V2O5-MoO3/TiO2. The results show that Mg modification can promote the denitration activity of V2O5-MoO3/TiO2 catalyst, and the maximum NOx removal efficiency of Mg1-SCR catalyst was 97.5%; the optimum reaction temperature and flow rate were 350℃ and 1200mL/min, respectively. Mg doping can broaden the reaction temperature window of the catalyst, and the denitration efficiency can reach more than 87% at 300℃. P2O5 solution was prepared as poisoning precursor and mixed with catalyst to simulate the process of catalyst P-poisoning. The step-wise study showed that Mg0.5-SCR and Mg1-SCR catalyst displays higher durable resistance to P, SO2, and H2O than original catalyst. The degree of denitrification efficiency reduction of Mg1-SCR is 4% smaller than that of Mg0-SCR after passing SO2. Mg0.5-SCR catalyst achieves 88% denitrification efficiency at 350°C after simulating phosphorus poisoning. The catalysts have been characterized by X-ray diffraction, Brunner - Emmet - Teller, scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscop, programmed temperature desorption, and programmed temperature reduction. The obtained results suggested that the Mg doping made the active components more dispersed on the surface of the supports, improved the thermal stability of the catalyst, promoted the transition of VOx from monomeric state to polymerized state, inhibited the interaction between P and V, and protected the acid site.