Effects Of Such Additives Research Articles

DEVELOPMENT OF A NEW SAUSAGE PRODUCT USING NATURAL ADDITIVES OF PLANT ORIGIN

The article is devoted to the prospects of using natural vegetable raw materials as food additives in the meat processing industry using the example of a new sausage product.The need to create such products arose as a result of the current situation with the use of a huge number of artificial food additives in the production of meat products, which allow manufacturers using cheap prescription ingredients to create a wide range of products more flavorful, tastier, more attractive in appearance, with an extended shelf life.The negative effect of such additives on the human body has been proven by numerous and long-term studies of domestic and foreign scientists. Therefore, in order to preserve and maintain the health of consumers, it is necessary to study the possibilities of using various plant raw materials, which, in addition to containing a large number of various useful substances, have the ability to exhibit those properties due to which artificial additives are used, for example, enhancing taste, aroma, suppression of pathogenic microflora, formation of the structure of the finished product, fixation of coloring, etc.In this regard, we have proposed a new sausage product with attractive organoleptic characteristics, intended for a wide range of consumers and for which a patent for a utility model has been obtained.

A - 166 Predictors of Intention to Participate in Programmed Exercise for Postconcussion Recovery.

Programmed exercise has been proposed for postconcussion recovery, but willingness to engage in such programs has not been explored. This study investigated sociocognitive factors from the Theory of Planned Behavior (TPB) and their relationship to exercise intention for postconcussion recovery (intention). Four hundred and fifty-nine adults completed an online survey (Age = 18-72years, 34% concussion history). All participants received information about mTBI, postconcussion symptoms, and programmed exercise. The measures assessed TPB constructs including intention, and evaluated program design features that could affect engagement (e.g., session frequency). Structured equation modelling found that intention was significantly predicted (p < 0.05) by subjective norms (strongest predictor) and perceived behavioral control (weaker predictor). Attitudes did not significantly predict intention. The model accounted for approximately half of the variance in exercise intention (R2 = 0.506). The addition of moderators (habitual exercise, concussion history) did not have any effect. Key program design features were personalization and supervision. People's intention to undertake programmed exercise for postconcussion recovery is shaped by individual psychological factors, especially subjective norms and perceived behavioral control. This could be considered in the program design (e.g., building program connections with significant others; fostering a sense of control through personalization/session timetabling). Further research is needed to establish the effect of such additions on engagement with programmed exercise for postconcussion recovery.

Characterization of Cassava Starch Extruded Sheets Incorporated with Tucumã Oil Microparticles

The application of biopolymers and feasible technologies to obtain sheets is crucial for the large-scale production of food packages and for reducing plastic pollution. Additionally, the inclusion of additives in sheets can affect and improve their properties. This work aimed to incorporate tucumã oil (TO) and TO microparticles produced by spray drying (SD), spray chilling (SC), and their combination (SDC) into extruded cassava starch sheets and to evaluate the effect of such addition on their physical, optical, and mechanical properties. Gum Arabic and vegetable fat were used as wall materials for SD and SC/SDC, respectively. The sheets enriched with tucumã oil (FO) and the microparticles produced by SD, SC and SDC (FSD, FSC, and FSDC, respectively) presented yellow color (hue angle around 90°) and higher opacity (11.6–25.3%) when compared to the control (6.3%). All sheets showed high thickness (1.3–1.8 mm), and the additives reduced the water solubility of the materials (from 27.11% in the control to 24.67–25.54% in enriched samples). The presence of large SDC particles, as evidenced by Scanning Electron Microscopy (SEM), caused discontinuity of the sheet structure and decreased mechanical strength of the FSDC. One may conclude that potential active packages were obtained by extrusion of cassava starch sheets added with pure and encapsulated TO.

Cholesterol as a Subsidiary Component of Sorbitan Surfactant-Based Aggregates: A Study of Formation, Hydrophobicity, and Estimation of Localization of Embedded Molecules

Aggregates of amphiphilic molecules can be used as drug carriers, for which the properties can be modified by mixing with other molecules such as cholesterol. It is important to understand the effects of such additives on the properties because they directly define the material functions. In this work, we investigated the effect of cholesterol on the formation and hydrophobicity of aggregates of sorbitan surfactants. As cholesterol changed its formation from micelles to vesicles, an increase in hydrophobicity was seen, particularly in the middle regions compared with the shallow and deep regions. We show that this gradual hydrophobicity is related to the localization of the embedded molecules. 4-Hydroxy-TEMPO and 4-carboxy-TEMPO were preferentially localized in the shallow region of the aggregates, whereas 4-PhCO2-TEMPO was preferentially localized in the deep region of the vesicle. The localization of molecules depends on their chemical structure. However, the localization of 4-PhCO2-TEMPO in micelles was not observed, despite the similar hydrophobicity in the hydrophobic region within the aggregates. The localization of embedded molecules was related to other properties, such as molecular mobility.

(Invited) Chemistry Effects on the Electrodeposition of Re, Co, and Alloys

Electrodeposition has been adopted in various metallization processes. It allows conformal and super-conformal deposition on curved and recessed substrates, enables the fabrication of metals and alloys with well controlled composition, impurity, and grain structure, and provides fast growth rate, high throughput, and low cost of ownership. Organic additives have been used in electrolytes to tune not only the growth behavior, but also the impurity and grain structure of the deposited material. The most well-known cases are those used for magnetic alloy plating[1,2] in storage and MEMS industry and for damascene copper plating[3,4] in microelectronic industry. On the other hand, the electrolyte itself has largely remained aqueous for most cases. Organic solvents, room temperature ionic liquids, and deep eutectic systems have been widely studied with, however, relatively limited success in large scale adoption.The first part of this talk will introduce some studies on the electrodeposition of Cobalt as an alternative metal for semiconductor interconnect applications. Organic additives that tailor the deposition rate of cobalt are used to enable the Co filling in sub-micron structures. The effect of such additives on the impurity incorporation and film grain structure will be discussed. The second part of the talk will discuss some recent studies on the electrodeposition from “water-in-salt” electrolytes, where the hydration of a super high concentration of supporting salt depletes the free water molecules in the aqueous solution, thus limiting the hydrogen evolution reaction. The discussion will be in a context of Re and ReCo alloy deposition for superconducting connector applications for quantum devices. REFERENCES T. Osaka, M. Takai, K. Hayashi, K. Ohashi, M. Saito, and K. Yamada, A soft magnetic CoNiFe film with high saturation magnetic flux density and low coercivity, Nature, 1998, 392(6678), 796. E.I. Cooper, C. Bonhôte, J. Heidmann, Y. Hsu, P. Kern, J.W. Lam, M. Ramasubramanian, N. Robertson, L.T. Romankiw, and H. Xu, Recent developments in high-moment electroplated materials for recording heads, IBM Journal of Research and Development, 2005, 49(1), 103. P. Andricacos, C. Uzoh, J. Dukovic, J. Horkans, and H. Deligianni, Damascene copper electroplating for chip interconnections, IBM Journal of Research and Development, 1998, 42(5), 567. T.P. Moffat, J.E. Bonevich, W.H. Huber, A. Stanishevsky, D.R. Kelly, G.R. Stafford, and D. Josell, Superconformal Electrodeposition of Copper in 500–90 nm Features, Journal of The Electrochemical Society, 2000, 147, 4524.

Термографические исследования деасфальтизата в присутствии 2-этилгексаноатов цинка, никеля и железа

The results of thermographic studies of the deasphalted oil obtained by deasphalting West Siberian oil tar with butane with the addition of zinc, nickel, and ferrous iron 2-ethylhexanoates, as well as without additives, are presented. The effect of metal-containing additives on the process of weight loss and the change in the magnitude of heat fluxes during thermal exposure has been established. The effect on the weight loss of samples of deasphalted oil containing salts of ferrous iron, with increasing temperature, differs significantly from the effect of such additives as zinc and nickel salts.

Termites Improve the Horizontal Movement of Carbonized Particles: A Step towards Sustainable Utilization of Biochar

Soil amendments containing carbonized materials increase the soil carbon reservoir, influence plant productivity, and, ultimately, help to clean the environment. There is data on the effect of such additions on soil physicochemical properties or plant growth, but few studies have focused on how these carbonized materials are distributed by termite species in the soil ecosystem. It is the first comprehensive study of the transportation of biochar (BC) by termite species under tropical environmental conditions in Pakistan. The present study was carried out to test the hypothesis that if termite species I) were involved in the distribution of biochar particles II) if yes, then how far these particles were transported during the study period (10 days) and III) check their preference between the enriched BC (EBC) and non-enriched BC. BC was enriched with the cattle slurry after its pyrolysis in the study. The results showed that EBC particles were significantly more widely distributed than non-enriched BC particles, but both types of BC were transported more than 4 cm (ring 4) within 10 days (at the end of the experiment). The current study also revealed that EBC was easily attached to the setae, cuticle, and legs of termites, implying that it could potentially be transported over a greater distance. Furthermore, transportation of EBC over larger distances indicated a potential preference of termite species between the EBC and BC particles. During the study, however, the preference among the termite species was also observed. Under the prevailing study conditions, the Coptotermes heimi and Heteroterme indicola species transported the EBC further than Microtermes obesi and Odontotermes obesus. These findings revealed that transportation preferences were observed among the four termite species. In conclusion, the current study found that termites were involved in the distribution of BC particles, with a preference for EBC and that these have the potential to transport BC particles more than 4 cm within 10 days. Furthermore, two species Coptotermes heimi and Heteroterme indicola may be more suitable candidates for EBC transpiration in Pakistani soils. It was necessary to conduct additional research into the effect of temperature on the transportation process.

Inclusion of 2D Transition Metal Dichalcogenides in Perovskite Inks and Their Influence on Solar Cell Performance.

Organic–inorganic hybrid perovskite materials have raised great interest in recent years due to their excellent optoelectronic properties, which promise stunning improvements in photovoltaic technologies. Moreover, two-dimensional layered materials such as graphene, its derivatives, and transition metal dichalcogenides have been extensively investigated for a wide range of electronic and optoelectronic applications and have recently shown a synergistic effect in combination with hybrid perovskite materials. Here, we report on the inclusion of liquid-phase exfoliated molybdenum disulfide nanosheets into different perovskite precursor solutions, exploring their influence on final device performance. We compared the effect of such additives upon the growth of diverse perovskites, namely CH3NH3PbI3 (MAPbI3) and triple-cation with mixed halides Csx (MA0.17FA0.83)(1−x)Pb (I0.83Br0.17)3 perovskite. We show how for the referential MAPbI3 materials the addition of the MoS2 additive leads to the formation of larger, highly crystalline grains, which result in a remarkable 15% relative improvement in power conversion efficiency. On the other hand, for the mixed cation–halide perovskite no improvements were observed, confirming that the nucleation process for the two materials is differently influenced by the presence of MoS2.

Exergetic performance evaluation of a diesel engine powered by diesel/biodiesel mixtures containing oxygenated additive ethylene glycol diacetate

A diesel engine running on diesel/biodiesel mixtures containing ethylene glycol diacetate (EGDA) was investigated from the exergoeconomic and exergoenvironmental viewpoints. Biodiesel was mixed with petrodiesel at 5% and 20% volume ratios, and the resultant mixtures were then doped with EGDA at 1–3% volume ratios. The exergetic sustainability indicators of the engine operating on the prepared fuel formulations were determined at varying engine loads. The indicators were selected to support decision-making on fuel composition and engine load following thermodynamic, economic, and environmental considerations. The engine load markedly affected all the studied exergetic parameters. The highest engine exergetic efficiency (39.5%) was obtained for petrodiesel doped with 1 v/v% EGDA at the engine load of 50%. The minimum value of the unit cost of brake power exergy (49.6 US$/GJ) was found for straight petrodiesel at full-load conditions, while the minimum value of the unit environmental impact of brake power exergy (29.9 mPts/GJ) was observed for petrodiesel mixed with 5 v/v% biodiesel at the engine load of 75%. Overall, adding EGDA to fuel mixtures did not favorably influence the outcomes of both exergetic methods due to its energy-intensive and cost-prohibitive production process. In conclusion, although petrodiesel fuel improvers such EGDA used in the present study could properly mitigate pollutant emissions, the adverse effects of such additives on thermodynamic parameters of diesel engines, particularly on exergoeconomic and exergoenvironmental indices, need to be taken into account, and necessary optimizations should be made before their real-world application.

MO684A CO-CULTURE MODEL FOR TESTING EFFECTS OF CYTOPROTECTIVE ADDITIVES IN PD FLUIDS ON THE SECRETOME OF MESOTHELIAL AND ENDOTHELIAL CELLS

Abstract Background and Aims The composition of all currently available peritoneal dialysis fluids (PDF) triggers morphological and functional changes in the peritoneal membrane. Periodic exposure leads to vasculopathy, hypervascularization, and diabetes-like damage of vessels of the peritoneal membrane, eventually leading to technique failure. Patients undergoing dialysis generally, have a high risk of cardiovascular events. It is currently unclear if there is a mechanistic link between peritoneal membrane failure and cardiovascular risk. In vitro and in vivo studies have shown that cytoprotective additives (e.g. dipeptide alanyl-glutamine (AlaGln) or kinase inhibitor lithium chloride (LiCl)) to PDF reduce peritoneal damage. Here, we developed an experimental model for investigating effects of such additives on secretome-mediated signalling between cell-types of the peritoneal membrane which are relevant in the cardiovascular context. Method For modelling the peritoneal membrane in vitro, mesothelial (MC) and endothelial cells (EC) were co-cultured in transwell plates. MC were grown in the upper compartment and primary microvascular cells were grown in the lower compartment. MC were exposed to PDF with or without cytoprotective compounds (8 mM AlaGln in glucose-based PDF 3.86% or 10 mM LiCl in icodextrin-based PDF), while EC below were kept in medium. Cell damage was assessed by quantification of lactate-dehydrogenase (LDH) release, neutral red uptake and cell morphology. Proteome and secretome profiles were analysed for both cell-types in co-culture or separately with an isobaric-tag labelling approach with a multiplexed liquid chromatography/mass spectrometry (LC-MS) approach. Prior to analysis of the secretome a bead-based equalizer approach based on a combinatorial peptide ligand library (CPLL) was performed to enrich low abundant proteins. Results EC injury after PD-fluid exposure of MC was decreased with the addition of AlaGln or LiCl, showing a link between the individual cell outcomes. Proteome analysis revealed perturbation of major cellular processes including regulation of cell death and cytoskeleton re-organization, which characterize PDF cytotoxicity. Selected markers of angiogenesis, oxidative stress, cell junctions and transdifferentiation were counter-regulated by the additives. Co-cultured cells yielded differently regulated pathways following PDF exposure compared to separate culture. We were able to identify and quantify 334 secreted proteins in the co-culture system. The secretome analysis showed variation in several clinically relevant proteins and important extracellular processes such as extracellular matrix reorganization, vesicle transport or collagen deposition. Comparison to previously published abundance profiles of omental arteriolar proteins from paediatric PD patient and age-matched controls confirmed overlapping protein regulation between endothelial cells in vitro and in vivo. Conclusion This study shows that harmful effects of PDF-stressed MC also affect EC and elucidates potential mechanisms by which cytoprotective additives may counteract the signalling axis between local peritoneal damage and systemic vasculopathy. An in vitro co-culture system may be an attractive approach to simulate the close proximity of different cell types in the peritoneal membrane for testing direct and indirect effects of cytoprotective additives. Characterisation of PD-induced perturbations may allow identifying molecular mechanisms linking the peritoneal and cardiovascular context, offering therapeutic targets to reduce current limitations of PD and ultimately decreasing cardiovascular risk of dialysis patients.

Impact of Cathodic Electric Double Layer Composition on the Performance of Aprotic Li-O2 Batteries

One of the difficulties limiting the development of high capacity Li-O2 batteries is the positive electrode passivation by the discharge product Li2O2 which is deposited mostly due to the second electron transfer of oxygen reductionwhich requires the presence of Li+ in the Stern layer. To suppress the passivation and shift the reaction zone of Li2O2 formation towards the electrolyte bulk, we propose to use additional cations in the electrolyte. Using molecular dynamics simulations, we investigate the ability of various cations to replace Li+ ions in the first cation layers near the electrode, with EMI+ (1-ethyl-3-methylimidazolium) and PP13+ (N-methyl-N-propylpiperidinium) showing pronounced effects. However, our experimental studies including cycling voltammetry and discharge capacity measurements in high and low donor number solvents reveal practically no effect of such addition. Therefore, Li+ should be fully eliminated from electron transfer zone, and this is possible by anchoring of additional cations according to the simulations. We optimized the surface density for these cations, although the experimental support of this approach looks challenging.

Effect of Emulsifier Diacetyl Tartaric Acid Ester of Mono- and Diglycerides (DATEM) and Enzyme Transglutaminase on Quality Characteristics of Rice Bran Croissants

Rice bran (RB) is a good source of dietary fibre. Addition of rice bran into croissant interferes with the gluten formation of dough and hence affect the physicochemical properties of croissant. The effect of RB addition on physicochemical properties of croissant were determined by using 0%, 10% and 15% RB. Besides, additives such as emulsifiers and enzymes can be used in pastry to enhance the physicochemical properties of croissant. Diacetyl tartaric acid ester of mono-diglycerides (DATEM) and transglutaminase (TGase) were used respectively on 0%, 10% and 15% RB to investigate the effect of such additives on physicochemical properties of croissant. Increased % RB and DATEM, produced a significant decrease in specific volume, together with a significant increase in colour, hardness and chewiness. With increased % RB, TGase caused significant increase in colour, hardness and chewiness but significant decrease in specic volume. The overall moisture sorption isotherm curves of the croissant belong to the Type III isotherm, also known as Flory-Huggins Isotherm (J-shaped). The critical aw obtained from the Guggenheim-Anderson-de Boer (GAB) equation showed that the shelf life of croissants were not positively impacted by the addition of DATEM and TGase and the addition of RB did not cause any significant positive effects on quality characteristics of croissants.

Ice Growth Suppression in the Solution Flows of Antifreeze Protein and Sodium Chloride in a Mini-Channel

The control of ice growth inside channels of aqueous solution flows is important in numerous fields, including (a) cold-energy transportation plants and (b) the preservation of supercooled human organs for transplantation. A promising method for this control is to add a substance that influences ice growth in the flows. However, limited results have been reported on the effects of such additives. Using a microscope, we measured the growth of ice from one sidewall toward the opposite sidewall of a mini-channel, where aqueous solutions of sodium chloride and antifreeze protein flowed. Our aim was to considerably suppress ice growth by mixing the two solutes. Inclined interfaces, the overlapping of serrated interfaces, and interfaces with sharp and flat tips were observed in the cases of the protein-solution, salt-solution, and mixed-solution flows, respectively. In addition, it was found that the average interface velocity in the case of the mixed-solution flow was the lowest and decreased by 64% compared with that of pure water. This significant suppression of the ice-layer growth can be attributed to the synergistic effects of the ions and antifreeze protein on the diffusion of protein.

Effect of Adding Lecithin and Nonionic Surfactant on α-Gels Based on a Cationic Surfactant-Fatty Alcohol Mixture.

α-Gels are often used as base materials for cosmetics and hair conditioners. α-Gel-based commercial products typically contain many types of additives, such as polymers, electrolytes, oily components, and other surfactants, in addition to the three basic components. However, few systematic studies have been conducted on the effect of such additives on α-gels. In this study, we chose surfactant as an example to initiate the effect of such additives on the structure and rheological properties of α-gel samples formulated using cetyl alcohol (C16OH) and cetyltrimethylammonium chloride (CTAC). Optical microscopy analysis demonstrated that the size of the vesicles in the α-gel samples in this study was decreased via the addition of hydrogenated soybean lecithin (HSL) and penta(oxyethylene) cetyl ether (C16EO5), a nonionic surfactant, to them. Rheological measurements revealed that at high C16OH/CTAC ratios, the viscosity and yield stress of the α-gel samples decreased owing to the addition of surfactants to them. Conversely, at low C16OH/CTAC ratios, the opposite tendency was observed. Small-angle X-ray scattering analysis indicated that for the α-gel samples with high C16OH/CTAC ratios, the addition of HSL or C16EO5 to them decreased the interlayer spacing of their lamellar bilayer stack, which led to the changes in the rheological properties of the α-gel samples.

Effects of organic additives on the impurity and grain structure of electrodeposited cobalt

Co films were electrodeposited with different additives including dimethylglyoxime, sodium chloride, and mercapto-propanesulfonate (MPS). A systematic study was conducted using scanning electron microscope, four-point probe, secondary ion mass spectrum, and X-ray diffraction to understand the effects of such additives on the morphology, resistivity, impurity incorporation, and grain structure of film, as well as how thermal annealing influences these attributes. The addition of MPS into the electrolyte was found to significantly increase the S incorporation level and decrease the grain size, both contributing to a higher sheet resistance of film. Transmission electron microscope with energy dispersive X-ray spectroscopy and local electrode atom probe tomography were used to determine the distribution of different impurity elements. A pronounced grain structure change from columnar grains to pseudo-spherical grains was observed upon the addition of MPS in electrolyte or the incorporation of S in film. In addition to the precipitation of sporadic S-rich clusters, S and C were also found to segregate at the grain boundaries in annealed Co films, both of which are believed to correlate to the grain growth and a significant resistance drop upon annealing.

Effect of binary additives on performance of the undivided soluble-lead-redox-flow battery

Cycle-life of Soluble-Lead-Redox-Flow-Batteries (SLRFBs) is impacted due to formation of lead dendrites at anode and oxygen evolution at cathode. In this regard, addition of certain surfactants to the electrolyte helps preventing dendrite formation while adding fluoride salts reduces the rate of oxygen evolution reaction. Since SLRFB has a common electrolyte, understanding the combined effect of such additives on individual electrodes as well as on the overall SLRFB performance is desirable, which is lacking in the literature. Accordingly, in the present study, the combined effect of sodium lignosulfonate (SLS) and sodium fluoride (NaF) additives on the overall cell performance, individual electrodes, electrode kinetics, crystallographic phase formation, and surface morphology of electrodeposits is reported. The electrochemical data on SLRFB are analyzed in the light of electrode-kinetic parameters, namely limiting current-density, exchange current-density and Tafel-slope. The study reveals that adding NaF additive enhances the kinetics of Pb/Pb2+ and Pb2+/Pb4+ redox couples as compared to the pristine electrolyte or with SLS additive. The exchange current-density is higher with NaF additive as compared to NaF and SLS binary combined additive. It is also observed from cyclic voltammograms that the peak current decreases in the presence of binary additive indicating sluggish electrode kinetics. SEM images and galvanostatic charge–discharge studies suggest that binary additive results in uniform electrodeposit which improves the cycle-life of SLRFB.

Effects of Different Microplastics on Nematodes in the Soil Environment: Tracking the Extractable Additives Using an Ecotoxicological Approach.

With increasing interest in the effects of microplastics on the soil environment, there is a need to thoroughly evaluate the potential adverse effects of these particles as a function of their characteristics (size, shape, and composition). In addition, extractable chemical additives from microplastics have been identified as an important toxicity pathway in the aquatic environment. However, currently, little is known about the effects of such additives on the soil environment. In this study on nematodes (Caenorhabditis elegans), we adopted an ecotoxicological approach to assess the potential effects of 13 different microplastics (0.001–1% of soil dry weight) with different characteristics and extractable additives. We found that poly(ethylene terephthalate) (PET) fragments and polyacrylicnitrile (PAN) fibers show the highest toxicity, while high-density polyethylene (HDPE), polypropylene (PP), and polystyrene (PS) fragments induced relatively less adverse effects on nematodes. In addition, low-density polyethylene (LDPE) induced no toxicity within our test concentration range for the acute period. Acute toxicity was mainly attributed to the extractable additives: when the additives were extracted, the toxic effects of each microplastic disappeared in the acute soil toxicity test. The harmful effects of the LDPE films and PAN fibers increased when the microplastics were maintained in the soil for a long-term period with frequent wet–dry cycles. We here provide clear evidence that microplastic toxicity in the soil is highly related to extractable additives. Our results suggest that future experiments consider extractable additives as key explanatory variables.

Formulation of sub-zero metalworking fluids for cutting processes: Influence of additives

Sub-zero metalworking fluids (MWF) are supplied to the machining process at temperatures below 0°C, but above those used in cryogenic machining. As sub-zero MWF are liquids, such that additives can be used. The effects of such additives on machining with sub-zero MWF were studied in the present work. The base MWF was a mixture of water and ethane-1,2-diol with which temperatures down to about −50°C can be achieved. The influence of the properties of the base MWF, which can be influenced by the concentration of the ethane-1,2-diol, on the machining process are discussed. Anti-corrosion, anti-wear, and extreme pressures additives were examined by face turning of steel for varied temperatures of the sub-zero MWF regarding tool temperatures, tool wear, and surface roughness. The effects achieved by the additives were found to be temperature-dependent and interactions between the additives were observed. The results show that further research on the effects of additives in sub-zero MWF is needed.

Iron-Catalyzed Oxidation of 1-Phenylethanol and Glycerol With Hydrogen Peroxide in Water Medium: Effect of the Nitrogen Ligand on Catalytic Activity and Selectivity.

The iron(II) complexes [Fe(bpy)3](OTf)2 (bpy = 2,2'-bipyridine; OTf = CF3SO3) (1) and [Fe(bpydeg)3](OTf)2 (bpydeg = N4,N4-bis(2-(2-methoxyethoxy)ethyl) [2,2'-bipyridine]-4,4'-dicarboxamide) (2), the latter being a newly synthesized ligand, were employed as catalyst precursors for the oxidation of 1-phenylethanol with hydrogen peroxide in water, using either microwave or conventional heating. With the same oxidant and medium the oxidation of glycerol was also explored in the presence of 1 and 2, as well as of two similar iron(II) complexes bearing tridentate ligands, i.e., [Fe(terpy)2](OTf)2 (terpy = 2, 6-di(2-pyridyl)pyridine) (3) and [Fe(bpa)2](OTf)2 (bpa = bis(2-pyridinylmethyl)amine) (4): in most reactions the major product formed was formic acid, although with careful tuning of the experimental conditions significant amounts of dihydroxyacetone were obtained. Addition of heterocyclic amino acids (e.g., picolinic acid) increased the reaction yields of most catalytic reactions. The effect of such additives on the evolution of the catalyst precursors was studied by spectroscopic (NMR, UV-visible) and ESI-MS techniques.

The Interesting Complicacy of the New Age Metallic Coatings with Carbonaceous Additives

It has been well documented that the inertness and impermeability of graphene/graphene oxide and hydrophobicity of carbon nanotubes (CNTs) can be used to protect surfaces from degradation due to corrosion. Direct deposition of these carbonaceous materials to protect large scale structures is however impractical due to obvious high cost and instrumentation related difficulties. One other way to use such carbonaceous additives is to incorporate them in minor quantitates into conventional metallic coatings. The sensitivity of the corrosion response of the composite coatings with minor additions of the carbonaceous materials is well established but there exists a debate about the beneficial or detrimental effect of such addition. In this report, we discuss some of the interesting observations made in our work on metal-graphene/graphene oxide/CNT composite coatings and illustrate that there exists a strong correlation between the additive volume fraction and the coating microstructure which essentially governs the corrosion response.