Effect Of Pressure Research Articles

Effect of bionic shield texture on friction behavior of silicon carbide under water lubrication condition

Abstract Reasonable texture parameters can effectively generate local dynamic pressure effects and promote the formation of lubrication film. The synergistic friction reduction mechanism of the shield-shaped texture on the Silicon Carbide (SiC) surface under water-based lubrication conditions between the flow pressure effect and the ‘rolling ball’ effect is investigated by combining simulation analysis and friction experiments. The effects of shield textured surface on the friction and wear characteristics of SiC surface and the characteristics of interfacial polarization electric field under different rotational speeds and different load conditions were analyzed. The results display that synergistic texture lubrication has a beneficial effect on improving tribological properties. The surface with 6% texture area occupancy showed the best tribological characteristics. The surface with a textured area occupancy of 6% displays the optimal tribological properties. Moreover, the friction reduction mechanisms under different working conditions are discussed, with the textured uniformly arranged surfaces being more suitable for high-speed and heavy load (140 N, 2000 rpm) conditions and the textured non-uniformly arranged surfaces being more suitable for low-speed and light load (40 N, 400 rpm) conditions.

Reducing the Influence of Time Pressure on Risky Choice

Abstract: While the impact of time pressure on decision-making is extensively studied, how individuals regulate their behavior under such conditions is less understood. This study addressed this gap by prompting participants to use cognitive reappraisal, an emotion regulation strategy. Participants were instructed to reinterpret their emotions during the decision-making process and asked to answer within 1,000 ms. Findings revealed that cognitive reappraisal mitigated the effects of time pressure in gain-framed trials by decreasing risk aversion that is usually induced by time pressure. A post hoc moderated mediation analysis indicated that this was attributed to the dual influence of cognitive reappraisal: less emotional intensity toward options and less overall emotional reliance during the cognitive process, both modulating risky preferences. However, this modulation was not observed in loss-framed trials. These results enhance our understanding of cognitive reappraisal’s role in moderating the behavioral impact of time pressure and suggest interventions to reduce affect heuristics in decision-making.

Comparison of Effects between Nasal Bi-Level Positive Airway Pressure and Nasal Synchronized Intermittent Mandatory Ventilation in Neonatal Respiratory Distress Syndrome

Aims/Background Neonatal respiratory distress syndrome (NRDS) is characterized by progressive aggravation and rapid progression of respiratory distress, with a high incidence rate among premature infants. If left untreated, NRDS results in a poor prognosis. In recent years, various respiratory support modalities have received extensive attention in clinical practice. The therapeutic effect of different respiratory support modes on NRDS has gradually become the focus of clinical research. The aim of this study was to explore the therapeutic effects of nasal bi-level positive airway pressure (nBiPAP) and nasal synchronized intermittent mandatory ventilation (nSIMV) on NRDS. Methods This study retrospectively analyzed the clinical data of 157 newborns with NRDS in the Mudanjiang Medical University Affiliated Second Hospital from January 2021 to December 2023, finally including 153 cases after excluding 4 cases with missing clinical data. According to the non-invasive ventilation method, these newborns were categorized into a nBiPAP group (receiving nBiPAP treatment, n = 77) and an nSIMV group (receiving nSIMV treatment, n = 76). The blood gas indices, using time of ventilator, hospitalization time, therapeutic effects, and incidence of complications were compared between the two groups. Results The PaCO2, PaO2, and pH levels in the nBiPAP group were basically consistent with those in the nSIMV group before and after treatment (p > 0.05). The use time of ventilator, hospitalization time, and therapeutic effects in the nBiPAP group were similar to those in the nSIMV group (p > 0.05). Additionally, both groups demonstrated no significant difference in the incidence of complications such as intraventricular hemorrhage, apnea, necrotizing enterocolitis, and feeding intolerance (p > 0.05). The incidence rates of ventilator-associated lung injury and neonatal bronchopulmonary dysplasia in the nBiPAP group were lower than those in the nSIMV group, with a significant difference (p < 0.05). Conclusion Both nBiPAP and nSIMV have shown good effects in treating NRDS, with nBiPAP showing a significant advantage in reducing the incidence rates of complications such as ventilator-associated lung injury and neonatal bronchopulmonary dysplasia.

A Quasi Time-Domain Method for Fatigue Analysis of Reactor Pressure Vessels in Floating Nuclear Power Plants in Marine Environments

The reactor pressure vessel (RPV) in onshore nuclear power plants is typically analysed for fatigue life by considering the temperature, internal pressure, and seismic effects using a simplified time-domain fatigue analysis. In contrast, the frequency-domain fatigue analysis method is commonly employed to assess the fatigue life of ship structures. The RPV of a floating nuclear power plant (FNPP) is subjected to a combination of temperature, internal pressure, and wave loads in the marine environment. Consequently, it is essential to effectively integrate the frequency-domain fatigue analysis method used for hull structures with the time-domain fatigue analysis method for RPVs in FNPPs or, alternatively, to develop a suitable method that effectively accounts for the temperature, internal pressure, and wave loads. In this study, a quasi-time-domain method is proposed for the fatigue analysis of RPVs in FNPPs. In this method, secondary components of marine environmental loads are filtered out using principal component analysis. Subsequently, the stress spectrum induced by waves is transformed into a stress time history. Fatigue stress under the combined influence of temperature, internal pressure, and wave loads is then obtained through a stress component superposition method. Finally, the accuracy of the quasi-time-domain method was validated through three numerical examples. The results indicate that the calculated values obtained by the quasi-time-domain method are slightly higher than those obtained by the traditional time-domain method, with a maximum deviation of no more than 24%. Additionally, the computation time of the quasi-time-domain method is reduced by 98.67% compared to the traditional time-domain method.

Revealing the Effects of Pressure on the SDAS and Columnar Dendrite Growth Rate in 30Cr15Mo1N Ingot by Phase Field Method

Revealing the Effects of Pressure on the SDAS and Columnar Dendrite Growth Rate in 30Cr15Mo1N Ingot by Phase Field Method

Effect of stress on study skills self-efficacy in Nursing students: the chain mediating role of general self-efficacy and self-directed learning.

The purpose of the study is to explore the current level of nursing students' study skills self-efficacy, and whether general self-efficacy and self-directed learning ability mediate the relationship between perceived stress (including positive stress and negative stress) and study skills self-efficacy. The survey was conducted among 1,289 nursing students including 795 students from Jinzhou Medical University and 494 students from Dalian University. Participants completed a self-designed questionnaire, which included the Study Skills Self-Efficacy Scale, Perceived Stress Scale, General Self-Efficacy Scale, Self-Directed Learning Instrument, gender, age, academic year, and other demographic characteristics. Descriptive analysis, independent-samples t-test, one-way analysis of variance, Pearson correlation analyses, and the bootstrap method were used for data analysis. Positive stress significantly positively predicted students' study skills self-efficacy, with an effect size of 0.686. Moreover, general self-efficacy and self-directed learning mediate the relationship between positive stress and study skills self-efficacy in nursing students, with effect sizes of 0.235 and 0.245, respectively. The direct effect of negative pressure on students' study skills self-efficacy is not statistically significant, but it has a significant negative predictive effect on study skills self-efficacy under the mediation of general self-efficacy and self-directed learning, with effect sizes of -0.337 and -0.238, respectively. This study explains how stress affects students' study skills self-efficacy, and the results have certain enlightenment significance for improving the stress management ability and study skills self-efficacy of college students in the future.

DFT calculations of pressure effects on structural stability, optoelectronic and thermoelectric properties of SrZrO3

DFT calculations of pressure effects on structural stability, optoelectronic and thermoelectric properties of SrZrO3

Physical and mechanical depth relationships of rocks from the Rotokawa Geothermal Reservoir, Taupō Volcanic Zone, New Zealand

ABSTRACT The Rotokawa geothermal field is in the Taupō Volcanic Zone, New Zealand. It hosts two geothermal power plants, Rotokawa and Ngā Awa Pūrua, which together have a capacity over 170 MWe. The permeability of the rock mass comprising a geothermal field controls the volume of hot fluids that can be extracted for energy production. In this research we produce a stress model to estimate in-situ rock matrix permeability for a unique set of intact rock samples obtained from depths up to 2600 m in the Rotokawa geothermal field. We show that permeability generally decreases with sample depth, both intrinsically and in response to increasing confining pressure. We explore this confining pressure effect on other petrophysical and mechanical measurements, and highlight how rock texture and composition affect how the rocks respond to confining pressure. For example, we compare two altered andesite samples: a breccia with microfractures and infilled pores that tends to experience less compaction and porosity decrease than a lava with rounded, unfilled pores. We suggest that, when developing depth-models, measurements should be conducted at relevant in-situ conditions, if possible. Finally, we explore relationships between different physical parameters and provide estimating functions for those with the clearest correlations.

Age-specific in the relationship between diastolic blood pressure and the risk of cardiovascular disease: A cohort study of the UK Biobank.

To investigate the effect of optimal diastolic blood pressure (DBP) level on cardiovascular disease (CVD) events, considering different age groups. And the nonlinear relationship between DBP and CVD events by age were evaluated. 358,734 participants of the UK biobank were included. Multivariable Cox regressions were performed to evaluate the relation between DBP and cardiovascular risk, and the natural cubic spline was applied to estimate the nonlinear relationship between the DBP measures and the hazard. In the UK Biobank, a total of 358,734 participants (mean [SD] age, 55.3 [8.1] years; 205,215 [57.2 %] female) were included in this analysis. The rate of CVD cases was 6.05 per 1000 person-years. For each SD increase, DBP was associated with elevated CVD events for both <50 year (HR, 1.19; 95 % CI, 1.12 to 1.26) and 50-59 year-old group (HR, 1.04; 95 % CI, 1.01 to 1.08). However, for every SD increment, a marginal protective effect against CVD events was observed between DBP and the CVD events in elder people (≥60 years old) and lower DBP (<70 mm Hg) may confer an increased CVD risks (HR, 1.10; 95 % CI, 1.03 to 1.17). For adults younger than 60 years old, the study seems to support the ACC/AHA blood pressure guidelines lowering the DBP threshold to 80 mm Hg. Conversely, it may be reasonable to rule out large effects of high DBP on CVD events and DBP <70 mm Hg may be cause for caution in older people aged 60-69.

Structural Transition Analysis of Bilayer Black Phosphorus under High Pressure via Ultralow-Frequency Raman Spectroscopy.

The unique anisotropic electron-photon and electron-phonon interactions of black phosphorus (BP) set it apart from other isotropic 2D materials. These anisotropic properties can be adjusted by varying the stacking thickness and sequence as well as by applying external pressure and strain. In contrast to multilayer or bulk BP, the effects of pressure on bilayer BP are still not fully elucidated. This study presents experimental evidence that explores the high-pressure response (0-20 GPa) of bilayer BP within the extreme low Raman shift region (5-150 cm-1), aiming at verifying structural phase transitions and stacking sequence variations. Notably, phase transitions were observed at ∼7 GPa for the orthorhombic to rhombohedral transition and at ∼14-16 GPa for a further transition to a simple cubic structure. The effects of pressure on bilayer BP with three distinct stacking sequences (AA, AB, and AC) were analyzed using angular-resolved polarized Raman spectroscopy (ARPR). The recovery of all characteristic Raman modes after the application of pressure substantiates the reversibility of the structural phase transitions in bilayer BP across all three stacking sequences. However, significant alterations in the stacking sequences were observed before and after the application of hydrostatic pressure. Specifically, AA and AC stacking sequences showed a tendency to relax into an optimized interlayer AB stacking structure upon the release of pressure from 20 to 0 GPa. This observed change in the stacking sequences of bilayer BP under pressure is detected for the first time in this work. The pressure-induced modifications in the stacking sequences, and consequently in the anisotropic properties of bilayer BP, highlight its potential as a promising material for pressure- (or strain-) sensitive optoelectronic nanodevices. Additionally, this study offers novel insights into the analysis of anisotropic interlayer interactions in other van der Waals-stacked 2D materials.

Pressure-induced structural stability, metallization and optoelectronic properties of transition metal chalcogenide BaTiS3

The pressure effects on the structural stability, metallization and optoelectronic properties of transition metal chalcogenide BaTiS3 are investigated by performing ab-initio calculations. Our calculations show that BaTiS3 has a hexagonal structure at ambient pressure, which matches well with the available experimental values. As pressure increases, a transition from hexagonal to orthorhombic phase occurs at around 10.8 GPa. The band structure and density of states of hexagonal BaTiS3 have been calculated and analysed. Moreover, the effect of pressure on the optical properties has been studied in terms of dielectric function as well as absorption coefficient, reflectivity and extinction coefficient. The application of hydrostatic pressure has shifted the maximum absorption toward the visible range, revealing that hexagonal BaTiS3 can be used for high pressure optoelectronic applications.

Crystal growth and pressure effect on the transport properties in 122-type (La,Na,K)Fe2As2 superconductors

Abstract High-quality single crystals are essential for probing the intrinsic properties of unconventional superconductors. In this work, we report the successful growth of (La,Na,K)Fe2As2 single crystals, a novel 122-type iron-based superconductor, using the self-flux method. The crystal structure and chemical composition were characterized through x-ray diffraction and energy-dispersive x-ray spectroscopy. The (La,Na,K)Fe2As2 single crystals exhibit bulk superconductivity, with a critical transition temperature Tc of approximately 22 K. Magnetization measurements reveal a second peak effect and a critical current density Jc ~ 5×105 A/cm2 at 2 K in a self-field. The upper critical field anisotropy was systematically studied within the framework of the anisotropic Ginzburg–Landau theory, yielding an anisotropy value of approximately 2.6. Furthermore, we employ the diamond anvil cell technique to investigate the pressure effect on (La,Na,K)Fe2As2. Our results demonstrate that superconductivity is gradually suppressed with increasing pressure, while the normal state resistivity at low temperatures evolves from non-Fermi liquid to Fermi liquid behavior. This observation suggests that (La,Na,K)Fe2As2 may be situated on the right of the quantum critical point or, at the very least, within the over-doped region. These findings provide a critical sample platform and experimental insights for advancing the understanding of the physical properties of the newly discovered (La,Na,K)Fe2As2 superconductors.

Generation mechanism and anti-friction effect evaluation of continuous micro-groove texture machined by ball-end milling process

Abstract The tool path in ball-end milling process is flexible and controllable considering the structure characteristics and moving way of the cutter. This paper aims to reveal the generation method of continuous surface micro-groove texture by using ball-end milling process and evaluate the corresponding anti-friction performance by combining simulation and friction experiments. Results indicate that continuous micro-grooved surface texture can be obtained by combining small feed per tooth and large radial cutting depth. Radial depth of cut and tool radius affect aspect ratio of micro-groove. The bearing capacity of the oil film shows an increasing and then decreasing trend with the increase of radial depth of cut and orientation angle. Radial depth of cut increased from 0.1 mm to 0.3 mm, resulting in a maximum 4.87% increase in the bearing capacity of oil film because of the enhanced wedge effect. However, further increase in radial depth of cut leads to increased vortex, weakening the wedge effect. The oil film bearing capacity is reduced so that the friction coefficient increases by a maximum of 510%. Moreover, as the orientation angle increases from 10° to 20°, the bearing capacity of the oil film increases by 22.7%. The minimum friction coefficient currently is 0.0215. However, when the micro-groove orientation angle is further increased, the countercurrent effect is enhanced and the dynamic pressure effect is weakened, which finally leads to a decrease in the bearing capacity of the oil film. The friction coefficient has increased by 30.2% maximum. This study is of great significance which provides a new method for guiding the friction reduction on the die surface.

Electrical Tree and Partial Discharge Characteristics of Silicone Rubber Under Mechanical Pressure

Silicone rubber (SIR) is a crucial insulating material in cable accessories, but it is also susceptible to faults. In practical applications, mechanical pressure from bending or shrinking can impact the degradation of SIR, necessitating the study of its electrical tree and partial discharge (PD) characteristics under such pressure. This work presents the construction of a test platform for electrical trees under varying pressures to observe their growth process. A high-frequency current transformer is used to measure PD patterns during tree growth, enabling analysis of the effect of PD on tree initiation and propagation under pressure. The experimental results demonstrate a significant decrease in tree inception probability and increase in PD inception voltage under pressure. The pressure also influences the tree structure and PD during the treeing process, where the longest tree with a branch-like structure appears under 800 kPa. The effect of pressure on electrical tree and PD characteristics can be attributed to changes in free volume, alterations in air pressure within the tree channels, and the affected charge accumulation.

Response of the nephron arterial network and its interactions to acute hypertension: a simulation.

We simulated the dynamics of a group of 10 nephrons supplied from an arterial network and subjected to acute increases in blood pressure. Arterial lengths and topology were based on measurements of a vascular cast. The model builds on a previous version exercised at a single blood pressure with 2 additional features: pressure diuresis and the effect of blood pressure on efferent arteriolar vascular resistance. The new version simulates autoregulation, and reproduces tubule pressure oscillations. Individual nephron dynamics depended on mean arterial pressure and the axial pressure gradient required to cause blood flow through the arteries. Rhythmic blood withdrawal into afferent arterioles caused blood flow fluctuations in downstream vessels. Blood pressure dependent changes in nephron dynamics affected synchronization metrics. The combination of vascular pressure gradients and oscillations created a range of arterial pressures at the origins of the 10 afferent arterioles. Because arterial blood pressure in conscious animals has 1/f dynamics, we applied an arterial pressure pattern with such dynamics to the model. Amplitude of tubule pressure oscillations were affected by the 1/f blood pressure fluctuations, but the oscillation frequencies did not change. The pressure gradients required to deliver blood to all afferent arterioles impose a complexity that affects nephrons according to their locations in the network, but other interactions compensate to ensure the stability of the system. The sensitivity of nephron response to location on the network, and the constancy of the tubular oscillation frequency provide a spatial and time context.

Component‐section transverse‐pressure effect on internal damage and failure mode of post‐installed rebar

AbstractA post‐installed rebar (PIR) is commonly used to establish structural connections between new components and existing structures, such as structural member extensions or concrete layer overlays in the construction/strengthening/retrofitting of buildings or bridges. In joint connections, the anchored PIR system always bears a non‐negligible compression in the component section, which is derived from the loads and self‐weight and has a confinement effect on the anchorage zone. However, excessive pressure can result in the fracture of the adhesive component, thereby leading to brittle failure in the PIR system. Owing to the important role of the adhesive component in the PIR system, this study is focused on the internal damage to the PIR system, and the effect of transverse pressure on the failure modes is investigated. This study comprises an experimental investigation of the failures of a PIR system under transverse pressure and a description of the internal damages based on the test results. Finally, an elastic analysis was established to explain the internal cracking and investigate the stress distribution in the PIR system. The tests on 34 pull‐out specimens showed two typical failures for the PIR system under transverse pressure (adhesive–rebar [A–R] interface failure and adhesive fracture failure). The A–R interface failure resulted from the shearing failure in the adhesive component, while the adhesive fracture failure resulted from the propagation of longitudinal and transverse cracks. The elastic analysis indicated that cracking in the concrete and adhesive component was dominated by circumferential stress, and the rebar rib direction and adhesive component thickness had a significant influence on the stress distribution. Based on this, some suggestions for anchorage design were made.

Invasive plants grow taller under experimental warming, but mediated effects of biotic interactions are species‐specific

Understanding the responses of non‐native plants to climate change while accounting for biotic interactions is key to predicting and mitigating future invasion risks. Non‐native invasive plants may benefit from or decline in the face of climate change, relative to native competitors. Non‐native plants might also suffer less than native plants from natural enemies such as herbivores, which could give non‐natives a competitive advantage. However, we lack an understanding of how non‐native plants will compete with native plants in a warming climate, while accounting for the effects of herbivore pressure. To test the potential interactions between warming, herbivore pressure and competition, we set up a common‐garden experiment in Trondheim, Norway, using five non‐native plants growing either alone or in competition with a native plant community. These plants were subjected to herbivore exclusion and artificial warming treatments, using open‐top chambers. We found that under warming, three non‐native species had greater biomass and all five species were taller than when grown without warming. Competition with native species reduced the biomass of three non‐native species and herbivore exclusion resulted in taller plants for three non‐native species. Native community biomass was not affected by either warming or herbivore exclusion. Furthermore, the native community was not affected by competition with any non‐native plant except Centaurea montana, which resulted in lower native community biomass, suggesting that C. montana is likely to be the most detrimental of these non‐native species to native communities. Competition with natives reduced the positive effects of warming on biomass for only one species, Alchemilla mollis. Our study strongly suggests that a warming climate may benefit invasive plants more than native plants, but for some species these effects will be mediated by biotic interactions in idiosyncratic ways, depending on the identity of both native and non‐native species. This will present a challenge to predicting plant invasion success under climate change while accounting for biotic interactions.

Abstract 4136963: Long-term Effects of Continuous Positive Airway Pressure on Cardiovascular Outcomes after Acute Myocardial Infarction in Obstructive Sleep Apnea Patients

Background: There is increasing evidence of a strong association between obstructive sleep apnea (OSA) and ischemic heart disease. Previous studies have demonstrated OSA to be a significant predictor of incident CAD, while recent studies have confirmed individuals with OSA to have 3.9 times greater incidence of major adverse cardiac and cerebrovascular events (MACCE) at one year following acute myocardial infarction (AMI) than individuals without OSA. Whether treatment with continuous positive airway pressure (CPAP) after AMI in OSA patients reduces MACCE is not known. This study investigated the long-term cardiovascular outcomes associated with CPAP therapy after AMI in OSA patients, and is the first study to evaluate the effect of CPAP on secondary prevention after AMI. Methods: This retrospective study was conducted from 2015 to 2019 and included adults with AMI. Patients with at least moderate OSA (n=180) were followed for at least 1 year and categorized as either AMI and compliant to CPAP (54 patients) or AMI and non-compliant to CPAP (126 patients). We estimated the incidence of MACCE (early rehospitalization, re-catheterization, CABG, recurrent MI, CHF, arrhythmia, stroke, and death) in each group during follow-up from the index event. Continuous and categorical variables were analyzed for significance with Wilcoxon’s test and Fisher’s exact test respectively. Multivariate analyses were performed to adjust for confounders. Results: Most participants were male, the average age was 66 years old, and no significant demographic difference was identified between the two groups. Compared with non-compliant patients, CPAP-compliant patients exhibited significantly lower overall MACCE incidence (22.2% vs 40.5%, p=0.03) and repeat catheterization rate (1.9% vs 11.1%, p=0.04) after AMI. Conclusion: Long-term, compliant CPAP therapy, as compared with non-compliant CPAP therapy, significantly reduces recurrent cardiovascular events and provides effective secondary prevention after AMI in patients with at least moderate OSA.

How to Assess and Predict Electrical Double Layer Properties. Implications for Electrocatalysis.

The electrical double layer (EDL) plays a central role in electrochemical energy systems, impacting charge transfer mechanisms and reaction rates. The fundamental importance of the EDL in interfacial electrochemistry has motivated researchers to develop theoretical and experimental approaches to assess EDL properties. In this contribution, we review recent progress in evaluating EDL characteristics such as the double-layer capacitance, highlighting some discrepancies between theory and experiment and discussing strategies for their reconciliation. We further discuss the merits and challenges of various experimental techniques and theoretical approaches having important implications for aqueous electrocatalysis. A strong emphasis is placed on the substantial impact of the electrode composition and structure and the electrolyte chemistry on the double-layer properties. In addition, we review the effects of temperature and pressure and compare solid-liquid interfaces to solid-solid interfaces.

Impact of limb occlusion pressure assessment position on performance, cardiovascular, and perceptual responses in blood flow restricted low-load resistance exercise: A randomized crossover trial

ABSTRACT This study investigated the effect of limb occlusion pressure (LOP) position on exercise performance, cardiovascular responses, and perceptual experiences during seated bilateral leg extensions with and without blood flow restriction (BFR). Thirty resistance-trained males (age: 22 ± 2 years; weight: 74.4 ± 13.6 kg; height: 177.4 ± 6.4 cm; BMI: 23.5 ± 3.3 kg/m2) participated. Each performed exercise to failure (4 sets, 30% 1RM, 1 min rest) in three conditions: Supine LOP-BFR, Seated LOP-BFR, and no-BFR. BFR was applied at 60% LOP. Significant interaction effects were found for RPE (p = 0.021, d = 0.76), RPD (p < 0.01, d = 1.72), and DOMS (p < 0.01, d = 2.28). Statistically significant fewer repetitions were completed in Supine LOP-BFR vs. no-BFR (p < 0.01, d = 0.5), Seated LOP-BFR vs. no-BFR (p < 0.01, d = 1.0), and Seated LOP-BFR vs. Supine LOP-BFR (p < 0.01, d = 0.6). RPE was higher in Seated LOP-BFR vs. no-BFR (p < 0.01, d = 0.52). RPD was higher in Supine LOP-BFR vs. no-BFR (p < 0.01, d = 0.62) and Seated LOP-BFR vs. no-BFR (p < 0.01, d = 1.25). DOMS was higher in Supine LOP-BFR vs. no-BFR (p < 0.01, d = 0.77) and Seated LOP-BFR vs. no-BFR (p < 0.01, d = 3.52). Seated LOP-BFR increased perceptual demands and reduced repetitions compared to Supine LOP-BFR. Both LOP-BFR conditions reduced repetitions compared to no-BFR without affecting cardiovascular measures.