Effects Of Electromagnetic Fields Research Articles

Investigating the effect of electromagnetic field and Eucalyptus oil Citriodora on polymorphism of PVDF film

AbstractPolyvinylidene fluoride (PVDF) films were prepared for evaluating the effect of electromagnetic field and Eucalyptus oil Citriodora as an additive on the polymorphism. The values of PVDF crystalline phases were determined by attenuated total reflection‐Fourier transform infrared spectroscopy. Differential scanning calorimetry was performed to achieve the crystallinity degree of the PVDF films. To evaluate the impact of the electromagnetic field on the PVDF crystalline phases, the polymeric solution was placed in 1 tesla electromagnetic field for different times. The proper time for dominating the β phase was determined 10 min. Additionally, the sum of β and γ phases percentages augmented from 28.8 for the sample without the additive of Eucalyptus oil Citriodora to 65.2 for the sample containing 8% additive.

Analysis of the Interaction Effects of Electromagnetic Fields with Major Living Tissues—One Health Concept Numerical Evaluation Strategy

The well-being and sociability of individuals have always been part of modernity. The development of new technologies that meet these aspirations is receiving increasing attention. Thus, strengthening the desired objectives of these technologies and minimizing their undesirable side effects is the subject of growing commitment. The present contribution aims, in this context, to evaluate and analyze the desired and undesirable effects of the interaction of electromagnetic fields with living tissues in general. These are routines based on mathematical modeling reinforcing the expected functions as well as those of control and protection against undesirable effects. These adverse effects correspond to the “One Health” concept, which encompasses the health of animals, plants and humans, as well as ecological disorders created by human activity. First, in this article, the interactions of electromagnetic fields with tissues are analyzed, involving their thermal biological effects of desired and undesired exposures. The roles of blood and sap fluids in bio-affected tissues are then analyzed. Secondly, the equations governing electromagnetics and bio-heat, as well as their coupled solution are studied. Third, the thermal behavior of tissues and the adverse effects of exposure are examined. Next, monitoring and defending the effects of exposures are discussed. This contribution, supported by a review of the literature, illustrates routines for mathematical modeling of the generalized interaction of electromagnetic fields with living tissues.

Influence of cross baffle on heat transfer of nanofluid flow inside circular pipe in existence of electromagnetic field: Computational study

The usage of electromagnetic sources for the improvement of the heat transfer of ferrofluid is an efficient method in heat exchangers. In this article, the effects of the non-uniform electromagnetic field on the thermal characteristics of the nanofluid with 4 % nanoparticles of Fe3O4 streaming inside the pipe with a double cross barrier are extensively investigated. To simulate the nanofluid flow, Computational Fluid Dynamic is applied and a three-dimensional model is chosen to reveal the main effects of the electromagnetic field on the thermal efficiency of the nanofluid flow. The main novelty of this work is related to the application of the cross baffle and non-uniform magnetic field for the heat transfer improvements. The achieved results show that the existence of the electromagnetic field and cross barrier facilitates the production of the vortex inside the pipe. Therefore, the thermal layer diffusion into the stream more efficiently, and the thermal efficiency of nanofluid is improved. The influence of magnetic field intensity also shows that increasing the thermal efficiency is a direct function of magnetic source intensity.

Integrated influence of sulfide modification on the reactivity of nanoscale zero-valent iron towards decabromodiphenyl ether under an electromagnetic field

Individual application of sulfide modification and electromagnetic field (EMF) can enhance the reactivity of nanoscale zero-valent iron (nZVI), yet the potential of both in combination is not clear. This work found that the reactivity of nZVI towards decabromodiphenyl ether was significantly enhanced by the combined effect of sulfidation and EMF. The specific reaction rate constant of nZVI increased by 7 to 10 times. A series of characterization results revealed that the sulfidation level not only affects the inherent reactivity but also the magnetic-induced heating (MIH) and corrosion (MIC) of nZVI. These collectively influence the degradation efficiency of nZVI under EMF. Sulfidation generally diminished the MIH effect. The low degree of sulfidation (S/Fe = 0.1) slightly reduced the MIC effect by 21.4%. However, the high degree of sulfidation (S/Fe = 0.4) led to significantly enhanced MIC effect by 107.1%. For S/Fe = 0.1 and 0.4, the overall enhancement in the reactivity resulting from EMF was alternately dominated by the contributions of MIH and MIC. This work provides valuable insights into the MIH and MIC effects about the sulfidation level of nZVI, which is needed for further exploration and optimization of this combined technology.

Electromagnetic Modulation of Cell Behavior: Unraveling the Positive Impacts in a Comprehensive Review.

There are numerous effective procedures for cell signaling, in which humans directly transmit detectable signals to cells to govern their essential behaviors. From a biomedical perspective, the cellular response to the combined influence of electrical and magnetic fields holds significant promise in various domains, such as cancer treatment, targeted drug delivery, gene therapy, and wound healing. Among these modern cell signaling methods, electromagnetic fields (EMFs) play a pivotal role; however, there remains a paucity of knowledge concerning the effects of EMFs across all wavelengths. It's worth noting that most wavelengths are incompatible with human cells, and as such, this study excludes them from consideration. In this review, we aim to comprehensively explore the most effective and current EMFs, along with their therapeutic impacts on various cell types. Specifically, we delve into the influence of alternating electromagnetic fields (AEMFs) on diverse cell behaviors, encompassing proliferation, differentiation, biomineralization, cell death, and cell migration. Our findings underscore the substantial potential of these pivotal cellular behaviors in advancing the treatment of numerous diseases. Moreover, AEMFs wield a significant role in the realms of biomaterials and tissue engineering, given their capacity to decisively influence biomaterials, facilitate non-invasive procedures, ensure biocompatibility, and exhibit substantial efficacy. It is worth mentioning that AEMFs often serve as a last-resort treatment option for various diseases. Much about electromagnetic fields remains a mystery to the scientific community, and we have yet to unravel the precise mechanisms through which wavelengths control cellular fate. Consequently, our understanding and knowledge in this domain predominantly stem from repeated experiments yielding similar effects. In the ensuing sections of this article, we delve deeper into our extended experiments and research.

Are friends electric? Valuing the social costs of power lines using house prices

Overhead electrical power lines and pylons have long raised concerns regarding the effects of electromagnetic fields on health, noise pollution and the visual impact on rural landscapes. These issues are once again salient because of the need for new lines to connect sources of renewable energy to the grid. In this study we provide new evidence on the cost implied by these externalities, as revealed in house prices. We use a spatial difference-in-difference approach that compares price changes in neighborhoods that are close to overhead power-lines, before and after they are constructed, with price changes in comparable neighborhoods further away. Our findings suggest that the construction of new overhead pylons reduces prices by 3.9% for properties up to 1500 m away, suggesting the impacts extend further than previously estimated.

Silicon rib waveguide with palladium coated gold nanorods overlayer for hexane and N-methylaniline detection

The adsorption of hexane and N-methylaniline was investigated by on-chip vibrational spectroscopy. The interaction with the Pd surface significantly perturbs the vibrational modes of hexane. Near-infrared absorption spectroscopy on the waveguide detected a redshifted CH stretching vibration. We showed that while rapid evaporation of one component may occur, the modification facilitates the sensing for large molecules and mixtures of substances. Rib waveguides were modified with palladium to exhibit an enhanced electromagnetic field effect due to the electrostatic interaction of Pd and hydrogen, showing the drop in the amine overtone absorption of 7.6 dB and the overtone related to the bond of carbon to hydrogen of 6.8 dB. The absorption of hexane bonds in water is 5.5 dB. The obtained values are 100 times higher than those predicted by the electromagnetic simulator for pure rib waveguides. This may be explained by CH bonds in hexane that can be activated through a hydrogen bond-like interaction with metal substrates. This achievement holds promising potential for advancing hexane and N-Methylailine detection and analysis technologies, with implications for diverse applications in various industries, such as environmental monitoring, industrial processes, and safety measures.

Retraction: "Evaluation of the neuroprotective effects of electromagnetic fields and coenzyme Q10 on hippocampal injury in mouse".

Retraction: "Evaluation of the neuroprotective effects of electromagnetic fields and coenzyme Q10 on hippocampal injury in mouse" by Mansoureh Soleimani, Fereshteh Golab, Akram Alizadeh, Sara Rigi, Zeinab Nazarian Samani, Gelareh Vahabzadeh, Tahmineh Peirovi, Maryam Sarbishegi, Majid Katebi, Fereshteh Azedi, J Cell Physiol 2019, 234: 18720-18730. The above article, published online on 1 April 2019 in Wiley Online Library (https://onlinelibrary.wiley.com/doi/full/10.1002/jcp.28512) has been retracted by agreement between the journal's Editor in Chief, Alexander Hutchison, and the Wiley Periodicals LLC. The retraction has been agreed following an investigation based on allegations raised by third parties. Image elements in Figures 3 and 5 were found to have been duplicated and/or published elsewhere in a different scientific context by the same author group. The authors have admitted significant errors in figure compilation due to the simultaneous execution of experiments for both this article and their previous publication, resulting in complications with organization and storage of data. Accordingly, the editors consider the conclusions of this article to be invalid. The authors have been informed of the decision to retract the article but disagree with it.

Effect of hydroxyapatite and pulsed electromagnetic field on osteogenic differentiation of human stem cells seeded onto 3D‐printed polycaprolactone scaffolds for future bone graft transplantation

AbstractBone graft transplantation is a risky procedure mainly due to postoperative complications. Tissue engineering is an alternative to regenerating bone tissue by seeding mesenchymal stem cells into 3D scaffolds by osteoinductive signaling. Poly(ε‐caprolactone) (PCL) is one of the most used biopolymers for fabricating scaffolds for bone tissue engineering. PCL is enriched with hydroxyapatite (HA) to promote the production of the bone‐mineralized matrix. Moreover, the application of pulsed electromagnetic fields (PEMFs) on scaffolds loaded with HA can significantly benefit collagen and HA networks favoring the interaction between organic and mineral phases of bones. In this context, we investigated, for the first time, the effect exerted by a PEMF exposure on the osteogenic differentiation of human adipose stem cells (hASCs) seeded onto 3D printed PCL‐HA scaffolds and cultured in growth and osteogenic medium (OM). After 21 days of culture, the results showed excellent colonization of scaffolds and the deposition of extracellular matrix (ECM) secreted by hASCs. Immunofluorescence staining confirmed the deposition of collagen type I and osteopontin both on scaffolds. Gene expression analysis indicated that both HA crystal and PEMF treatment were able to trigger osteogenic differentiation, as documented by the increase of osteogenic markers. These results suggest that HA, osteogenic factors, and PEMFs converge on the same signaling pathways as there are no additive effects and no change in protein synthesis between scaffolds with HA or treated with PEMFs for cells cultured in OM. The proposed study lays the foundations for exploring new approaches in bone graft transplantation.

Ag Nanoparticles@Au Nanograting Array as a 3D Flexible and Effective Surface-Enhanced Raman Scattering Substrate.

Surface-enhanced Raman scattering (SERS) is a powerful analytical technique for chemical identification, but it remains a great challenge to realize the large-scale and well-controlled fabrication of sensitive and repeatable SERS substrates. Here, we report a facile strategy to fabricate centimeter-sized periodic Au nanograting (Au-NG) decorated with well-arranged Ag nanoparticles (Ag-NPs) (denoted as Ag-NPs@Au-NG) as a three-dimensional (3D) flexible hybrid SERS substrate with high sensitivity and good reproducibility. The Au-NG patterns with periodic ridges and grooves are fabricated through nanoimprint lithography by employing a low-cost digital versatile disc (DVD) as a master mold, and the Ag-NPs are assembled by a well-controlled interface self-assembly method without any coupling agents. Multiple coupling electromagnetic field effects are created at the nanogaps between the Ag-NPs and Au-NG patterns, leading to high-density and uniform hot spots throughout the substrate. As a result, the Ag-NPs@Au-NG arrays demonstrate an ultrahigh SERS sensitivity as low as 10-13 M for rhodamine 6G with a high average enhancement factor (EF) of 1.85 × 108 and good signal reproducibility. For practical applications, toxic organic pollutants including crystal violet, thiram, and melamine have been successfully detected with high sensitivity at a low detection limit, showing a good perspective in the rapid detection of toxic organic pollutants.

Environmental Factors as the Main Hormonal Disruptors of Male Fertility.

Many scientific reports confirm a systematic decline in male semen parameters over the last decades. This phenomenon has been observed in all parts of the world, and its occurrence is associated, among others, with the hazardous effects of some environmental factors. The environmental factors for which the adverse effect on male fertility has been proven include water, air, and soil pollution, as well as electromagnetic fields and ionizing radiation. The aim of this article was the evaluation of the effect of selected environmental factors on male reproductive capacity based on an analysis of the current scientific reports. A systematic literature review was carried out using three databases: PubMed, EMBASE, and Scopus. The search was limited to the period from 2015 until the end of December 2023. Brief description of the state of knowledge: Environmental factors, such as heavy metals, tobacco smoke, pesticides, dioxins, furans, phthalates, and bisphenols, are well-tested substances that exert an adverse effect on male fertility. A harmful effect of electromagnetic fields and water and air pollution on reproductive functions may be expected; however, this has not been fully proven. Results obtained by many researchers published to date should evoke great concern regarding the quality of the environment in which we live, as well as fears about the effect of environmental factors not only on male fertility, but also on all aspects of human health. The majority of environmental pollutants affect the male body by causing oxidative stress and through their effect on the endocrine system.

Current Evidence Using Pulsed Electromagnetic Fields in Osteoarthritis: A Systematic Review.

(1) Background: Osteoarthritis (OA) significantly impacts patients' quality of life and negatively affects public healthcare costs. The aim of this systematic review is to identify the effectiveness of pulsed electromagnetic fields (PEMFs) in OA treatment across different anatomical districts, determining pain reduction and overall improvement in the patient's quality of life. (2) Methods: In this systematic review following PRISMA guidelines, PubMed and Google Scholar were searched for randomized controlled trials involving patients with osteoarthritis undergoing PEMF therapy. Seventeen studies (1197 patients) were included. (3) Results: PEMF therapy demonstrated positive outcomes across various anatomical districts, primarily in knee osteoarthritis. Pain reduction, assessed through VAS and WOMAC scores, showed significant improvement (60% decrease in VAS, 42% improvement in WOMAC). The treatment duration varied (15 to 90 days), with diverse PEMF devices used. Secondary outcomes included improvements in quality of life, reduced medication usage, and enhanced physical function. (4) Conclusions: Diverse PEMF applications revealed promising results, emphasizing pain reduction and improvement in the quality of life of patients. The variability in the treatment duration and device types calls for further investigation. This review informs future research directions and potential advancements in optimizing PEMF therapies for diverse osteoarthritic manifestations.

Evaluation of the Exposure of 4.5G Mobile Phone Base Stations in Different Band Radio Frequencies in Urban Center and Rural Areas in Turkey.

Mobile phone base stations (MPBS) are electronic communication equipment, the number of which is rapidly increasing with the increasing need for mobile data use with developing technology. Since the middle of the 21st century, the effects of Radio Frequency Electromagnetic Fields (RF-EMF) emitted from base stations on human health have begun to be investigated. Although some of these studies have explained the harmful effects of RF-EMF on human health, others have stated that its effects on human health are limited and therefore contradictory results have emerged. RF-EMFs can have effects by transferring energy to human tissues, increasing temperature and changing the way cell membranes work. These effects may vary inversely with the proximity of MPBSs to residential areas and their safety distances. In this regard, rules such as location at least 300 m away from places with high population density (schools, hospitals, shopping malls, etc.) and at least 40 m above the ground are required. In this study, RF-EMF values of base stations installed both in Rize city center and rural areas in Turkey in different 4.5G frequency bands (GSM 900 DL- 1800 DL-2100 DL) were analyzed by real-time selective area analyzer (NARDA- It is measured using SRM 3006). The safety distances in the production/label values of these base stations, mathematically calculated EMF and measurement values were compared for different distances. Base station production/label and real-time measurement values of RF-EMF values emitted by MPBSs in urban centers and rural areas are determined and their effects on human health are evaluated.

Seed pre-treatment with electromagnetic field (EMF) differentially enhances germination kinetics and seedling growth of maize (Zea mays L.)

Pre-sowing treatment of seeds with different intensities and exposure times to electromagnetic fields (EMF) has proved to be beneficial in increasing the productivity of crops. The purpose of the recent study was to evaluate the effects of electromagnetic fields applied prior to cultivation to seeds of two maize genotypes namely FH-1046 and YH-5427. Sterilized seeds were exposed to three doses of EMF and sown in six treatments levels i.e. T0 (as control), T1 (60mT for 3 min.), T2 (120mT for 3 min.), T3 (180mT for 3 min.), T4 (60mT for 6 min.), T5 (120mT for 6 min.), and T6 (180mT for 6 min.). There were three replicates in each treatment. Results showed EMF exposure as an augmenting factor as it caused up to 50 % improvement in seed germination performance. The EMF exposure increased germination kinetics and triggered enhancement in morphological characteristics i.e., higher leaf area, plant height, more fresh and dry weight; higher concentration of physiological pigments like chlorophyll a, b, and carotenoids; upregulated antioxidative enzymatic activities; and, higher mineral ions concentration such as Na+, K+, and Ca2+. A growth promotory effect of all doses of electromagnetic field was observed on crop performance, however, T3 (180mT for 3 min.) and T5 (120mT for 6 min.) resulted in the highest germination indices, vegetative proliferations and biochemical assays. Of the two genotypes of maize, FH-1046 proved to be more sensitive the EMF as compared to YH-5427. It was concluded that maize growth and grain yield might be directly enhanced through the useful aspects of EMF by its analytical and sustainable utilization at the large scale of agricultural farming.

Моделирование влияния электромагнитных полей на микросхемы

The article examines the influence of electromagnetic fields on radiation effects in microcircuits, describes the influence of electromagnetic fields depending on the distance from the center of the explosion, and evaluates the degree of protection of microcircuits. Assessments of the impact of electromagnetic fields created by gamma radiation on CMOS microcircuits are considered, the physical process, a mathematical model of the occurrence of leakage current, charge loss, transistor switching speed and electronic mobility are described. The methods of protecting CMOS semiconductors from the effects of electromagnetic fields are considered: shielding, reducing the power and frequency of radiation, and compensation for the effects. Both the physical basis and the mathematical model of the parameters for shielding are considered: attenuation coefficient and shielding efficiency. The main method of protecting microcircuits from electromagnetic fields is determined using shielding, reducing the power and frequency of radiation, as well as compensating for exposure. The article describes the mathematical and algorithmic models on the basis of which a computer model was built to assess the impact of the electromagnetic field on CMOS semiconductors. The assessment of the reliability of the chip security assessment is based on a computer experiment built using a program written in the C# programming language. The result was data from an analysis of protection from the effects of an electromagnetic field on CMOS semiconductors for distances from the epicenter of the explosion at a distance of 10 to 100 km with a step of 10 km.

The Mobile Phone Electromagnetic Radiation Effects on Heart Rate Variability Function

Background: The proliferation of mobile phone usage has given rise to concerns about the potential health effects of electromagnetic fields (EMF), particularly in relation to heart rate variability (HRV), a key indicator of cardiac health. Previous studies have yielded inconsistent results using lower-order statistical measures, leaving a gap in understanding the nonlinear interactions between EMF exposure and HRV. Objective: This study aimed to investigate the effects of mobile phone EMF on HRV by employing bicoherence analysis of ECG data. It sought to determine whether the position of EMF exposure relative to the heart and the duration of exposure affected HRV parameters. Methods: Twenty subjects were recruited for the study, with ECG and EEG data collected under EMF and non-EMF conditions. ECG data were captured using a 12-lead system, with electrodes placed according to standard guidelines. EEG electrodes were positioned following the 10-20 system. Bicoherence and coherence analyses were conducted to assess nonlinear interactions in HRV activity and the relationship between heart and brain signals. The study also considered the duration of EMF exposure, comparing the effects of 10-minute and 40-minute sessions. Results: The bicoherence values for ECG data during EMF exposure at the left ear showed negligible differences, with values ranging between 0.0 to 0.04. However, chest positions V1 and V2 revealed statistically significant larger bicoherence values during non-EMF trials as opposed to EMF trials. Coherence analysis between ECG and EEG demonstrated significantly higher values across the 16-30Hz frequency band during EMF trials. No significant differences were observed for 10-minute EMF exposure, whereas 40-minute exposure sessions indicated a correlation with changes in HRV. Conclusion: The study's findings suggest that mobile phone EMF can affect HRV parameters, with the effects being more pronounced during longer exposure durations and when the source of EMF is closer to the heart. These results support the need for guidelines on safe mobile phone usage and further research into the effects of EMF on cardiac function.

Effect of electric and electromagnetic fields on energy consumption, texture, and microstructure of dried black garlic

Drying is one of the most energy-intensive food processing technologies and can contribute to greenhouse gas (GHG) emissions. Therefore, novel nonthermal pretreatment methods can be used to affect the plant tissue and decrease the drying time. A pulsed electric field (PEF), direct current electric field (DCEF), and electromagnetic field (EMF) were applied to black garlic cloves which were subsequently subjected to convective pre-drying followed by a vacuum-microwave finishing drying. The effect of these pretreatments on the physical properties, energy consumption, attributes of texture profile analysis (TPA), as well as microstructure determined by the use of X-ray computed tomography is presented. The application of pretreatments reduced the porosity of the material and resulted in an increased hardness compared to the unpretreated sample. Overall, nonthermal pretreatments proved beneficial in reducing the drying time and minimizing the energy consumption as well as greenhouse gas emissions during processing while maintaining a high quality of dried black garlic.

Impact of Pulsed Electromagnetic Field Therapy and Aerobic Exercise on Patients Suffering With Hypertension: A Systematic Review.

Hypertension is a major preventable risk factor for cardiovascular disease. This reviewevaluates the effects of pulsed electromagnetic field (PEMF) therapy and aerobic exercise on blood pressure (BP) levels in hypertensive patients. This study incorporated research conducted between 2012 and 2020 that was found through a systematic literature search. The measures used to estimate the improvement in BP include the BP measurements, quality-of-life (QOL) scale, and plasma nitric oxide (NO) level. The examination of the review comprised eight studies. These encompassed studies involving individuals with a systolic BP (SBP) above 140 mmHg and a diastolic BP (DBP) above 90 mmHg; those falling within the age range of 40 to 60 years, including both genders; and patients on antihypertensive medications. The review of selected articles concluded that PEMFtherapy and aerobic exercise positively impact BP among individuals with hypertension. Aerobic exercises of moderate intensity including brisk walking, jogging, and cycling type of aerobic exercises help reduce BP and maintain patients' physical fitness. PEMF therapy is a complementary approach that affects the biological system and potential health, positively impacting BP. Results indicate that PEMF therapy can be a nonpharmacological method to manage BP in clinical populations. More thorough research is necessary to understand the best dosage, long-term effects, and comparison between PEMF therapy and aerobic exercise.

Study of the copper structure samples externed to extreme influences

This work is devoted to the study of changes in the crystal structure, chemical and phase composition of copper samples subjected to extreme effects of temperature, pressure and electromagnetic fields. With the help of X-ray diffraction, as well as microanalysis, it was revealed that the plastic deformation of copper wires in the car power supply system leads to the formation of a superconducting Cu2O phase. This is the reason for the rapid ignition of the car, as it leads to a sharp increase in the magnitude of the electric current and temperature in the plastic deformation zone of copper wires. During explosion welding of copper samples, the Cu2O phase appears on their surface, which has superconducting properties. This significantly changes the electrophysical properties of copper samples. In metallurgical processes during the smelting of copper products, there is a possibility of the appearance of a superconducting Cu2O phase. When modifying a copper melt with hardening additives, the superconducting Cu2O phase makes it possible to obtain fracture-resistant copper products with high electrical conductivity. Plastic deformation of a copper foil 30 mkm thick by a magnetic field generated by a current of 180 kA leads to the formation of a texture and rupture of the foil. This has been detected using X-ray diffraction, as well as optical and scanning electron microscopy.

The Influence of Various Commonly Used Building Materials on the Shielding Effectiveness, Reflection and Absorption of the Electromagnetic Wave

People spend two-thirds of their time in buildings. Building materials are, therefore, natural shielding for us. Many studies describe the shielding effect of non-building materials. This study evaluates the shielding effectiveness (SE) of electromagnetic fields for various building materials over a frequency range of 1 GHz to 9 GHz. Measurements of SE, reflection (R), and calculated absorption (A) were conducted to determine the shielding properties of mineral wool (MW), hardened polystyrene (PT), extruded polystyrene (PE), polyurethane board (PUR), brick wall (BW), brick wall filled with mineral wool (BW-MW), and concrete wall. The results demonstrate that MW, PT, PE, and PUR exhibit low SE and R, indicating minimal shielding capabilities, with absorption values that do not significantly deviate from the level of measurement uncertainty. Conversely, BW, BW-MW, and concrete wall materials exhibit high SE, with notably increased absorption at higher frequencies, highlighting their potential for effective EMI shielding. Particularly, the concrete wall presents the highest absorption values, making it a superior choice for shielding applications. Reflection trends revealed a plateau for BW in the 6 GHz to 9 GHz range, indicating a frequency-dependent behavior of shielding mechanisms. This study underscores the importance of balancing reflective and absorptive properties in shielding materials and suggests that composite materials may offer enhanced performance. The findings of this research provide guidance for the selection and design of shielding materials in environments with a frequency spectrum of electromagnetic frequencies from 1 GHz to 9 GHz.