Effects Of Accidental Explosions Research Articles

Robustness assessment of a deterministically designed sacrificial cladding for structural protection

Being able to efficiently mitigate the effects of blast loads on structures, sacrificial cladding solutions are increasingly used to protect structural elements from the effects of accidental explosions and/or terrorist attacks. The present study analyses the loss of effectiveness of a deterministically designed sacrificial cladding when variability in the material properties and uncertainties in the mechanical model are considered. The results of an experimental campaign are used to validate the numerical models that allow the deterministic design of a sacrificial cladding which successfully improves the blast resistant capabilities of a given structural element. Nonetheless, it is shown that, taking into account the probabilistic variability of key parameters is of vital importance when designing sacrificial cladding solutions, since, when not properly designed for the structural element it intends to protect, adding a sacrificial cladding might negatively impact its blast resistant capabilities. Additionally, it is concluded that the deterministic approach might be against safety. In the reported case study, when comparing the admissible charge weight yielding from the deterministic and probabilistic approaches, one verifies that the former allows a higher charge weight.

Experimental Investigation of Aluminum Foam Lined Suppressive Shield Containment Vessels

Manufacture, transport, and storage of dangerous goods, especially energetic materials, in Canada and around the world pose serious challenges to explosives regulators and inspectors. Currently siting of manufacturing and storage facilities are in accordance with quantity-distance principles designed to mitigate effects of accidental explosions. The land requirements to satisfy these principles are imposing financial burdens on the explosives sector. This paper presents an experimental program designed to investigate the effectiveness of suppressive shield containers in reducing the blast pressure outside of the container while eliminating fragments thus reducing the distance requirement for the stored amount of explosives. Several suppressive shield panels including aluminium foam-lined panels were tested to study their effect on blast pressure and impulse. In addition computational fluid dynamics techniques were used to study suppressive shields effects on blast environment. The results show reduction of the incident peak blast pressure by 60% and the incident impulse by 58%. The aluminium foam-lined suppressive shield panels attenuated the peak incident pressure and impulse by 80%.