Effect Of Sweep Research Articles

Evolution of the correlated genomic variation landscape across a divergence continuum in the genus Castanopsis.

The heterogeneous landscape of genomic variation has been well documented in population genomic studies. However, disentangling the intricate interplay of evolutionary forces influencing the genetic variation landscape over time remains challenging. In this study, we assembled a chromosome-level genome for Castanopsis eyrei and sequenced the whole genomes of 276 individuals from 12 Castanopsis species, spanning a broad divergence continuum. We found highly correlated genomic variation landscapes across these species. Furthermore, variations in genetic diversity and differentiation along the genome were strongly associated with recombination rates and gene density. These results suggest that long-term linked selection and conserved genomic features have contributed to the formation of a common genomic variation landscape. By examining how correlations between population summary statistics change throughout the species divergence continuum, we determined that background selection alone does not fully explain the observed patterns of genomic variation; the effects of recurrent selective sweeps must be considered. We further revealed that extensive gene flow has significantly influenced patterns of genomic variation in Castanopsis species. The estimated admixture proportion correlated positively with recombination rate and negatively with gene density, supporting a scenario of selection against gene flow. Additionally, putative introgression regions exhibited strong signals of positive selection, an enrichment of functional genes, and reduced genetic burdens, indicating that adaptive introgression has played a role in shaping the genomes of hybridizing species. This study provides insights into how different evolutionary forces have interacted in driving the evolution of the genomic variation landscape.

Economic and environmentally friendly anionic flocculant synthesized by starch-acrylic acid-itaconic acid grafting and efficient treatment of cationic dye wastewater

Starch-based flocculants are environmentally friendly and high-performance products, potentially applied in wastewater treatment with low operation cost and ecological risk. In this study, we successfully synthesized a ternary anionic copolymer of starch-acrylic acid-itaconic acid (SAI) through graft copolymerization. The synthesis conditions were optimized based on flocculation efficiency against cationic crystal violet (CV), and subsequent applicability was conducted under various environmental conditions. The results indicate that SAI exhibited outstanding decolorization efficiency under wide scopes of pH, temperature, and ionic strength. Most importantly, SAI achieved a remarkable decolorization rate of 91.2 % for 100 mg/L CV dye at a low concentration of 25 mg/L, accounting for one-fourth of the cost operated with commercial polyacrylamide. Compared to binary flocculants, SAI demonstrates superior flocculation performance too. The flocculation mechanism is primarily attributed to the combined effects of charge neutralization, bridging, and sweeping. SAI flocculants possess characteristics of high efficiency, environmental friendliness, and cost-effectiveness, thus presenting broad prospects for the treatment of dye wastewater.

Numerical study of the effects of discontinuous ice on three-dimensional wings

Ice accretion has adverse effects on aircraft, so it is very important to study the flow field of iced wings. Unlike previous studies that typically focused on continuous ice, this paper conducts a numerical study of the flow field around discontinuous ice. A modified laminar-turbulent transition model that incorporates large separation correction is employed for the study of discontinuous ice. An iced swept wing was chosen to validate the modified model's capability in predicting aerodynamic performance. The impact of discontinuous ice on both straight and swept wings was studied. For the straight wing, the effect of discontinuous ice with different gap widths on aerodynamic characteristics was investigated. The results show that the reduction in lift caused by discontinuous ice is typically lower than that caused by continuous ice. However, at angles of attack less than 7°, small-gap discontinuous ice causes more substantial reductions in lift compared to continuous ice. This is because small-gap ice causes greater separation at the leading edge, significantly reducing the suction peak of pressure. For the swept wing, the effect of sweep on discontinuous ice was studied. It was found that the swept effect causes asymmetric separation behind the ice shape. At higher angles of attack (greater than 4°), the impact of different ice configurations on lift shows an opposite trend on swept wings compared to straight wings.

Efficient, quick, and low-carbon removal mechanism of microplastics based on integrated gel coagulation-spontaneous flotation process

To address the problems of unstable efficiency, long treatment period, and high energy consumption during microplastics (MPs) removal by traditional coagulation–flotation technology, a gel coagulation–spontaneous flotation (GCSF) process is proposed that employs laminarin (LA) as the crosslinker and polyaluminum chloride (PAC)/polyaluminum ferric chloride (PAFC) as the coagulant to remove MPs. Herein, the effects of GCSF chemical conditions on microplastic-humic acid composite pollutants (MP-HAs) removal were investigated, and the removal mechanisms were analyzed through theoretical calculations and floc structure characterization. Results showed that an LA to PAC/PAFC ratio of 2.5:1 achieved the highest removal of HA (86 %) and MPs (93 %–99 %) in short coagulation (< 1 min) and spontaneous flotation (< 9 min) period. PAC-LA exhibited strong removal ability for MP-HAs while PAFC-LA induced fast flotation speed. The peak intensity and peak shift in Fourier-transformed infrared and X-ray photo-electron spectra indicated that the removal mechanisms of MPs include hydrogen bond adsorption and the sweeping effect, mainly relying on –OH/–C = O on the MPs surface and entrapment of gel flocs with a high degree of aggregation, respectively. The extended Derjaguin-Landau-Verwey-Overbeek calculation also revealed that interactions between PAC/PAFC-LA and MP-HAs were mainly polar interaction (hydrogen bonding) and intermolecular attraction interaction (Lifshitz-van der Waals force), and the sweep effect was reflected by intermolecular interaction. In addition, density function theory calculations indicated that –OH in LA mainly adsorbs DO through a double hydrogen bond configuration, and the crosslinking ligand FeO6/AlO6 assists in DO absorption by –OH.

Design strategy and relevant flow mechanisms of highly loaded 3D compressor tandem cascades

To investigate the design strategy of highly loaded tandem cascades at both the midspan and endwall, the overall performance and flow mechanisms of four typical tandem cascades based on the optimization were analyzed from multiple perspectives numerically. The results show that the interference effects on the Front Blade (FB) and Rear Blade (RB) should not be overlooked during the design phase, and the design strategies at the midspan and endwall are completely different. At the midspan, the optimization aims to increase the interference effects and the strength of the gap jet while maintaining the same load on the FB and RB. However, the endwall optimal airfoil exhibits weakening interference effects, advancement of the gap jet location, and load transfer from the FB to RB. Through further analysis of flow characteristics, the midspan optimal airfoil is beneficial for inhibiting the low-energy fluid from interacting with the suction surface of RB under the design condition, but results in earlier occurrence of corner stall. The endwall optimal airfoil helps suppress the development of the secondary flow and delay the onset of corner stall. Furthermore, by combining the benefits of these two design approaches, additional forward sweep effects are achieved, further enhancing the performance of the tandem cascade.

Examining the effectiveness of municipal street sweeping in removing road-deposited particles and metal(loid)s of respiratory health concern

Road dust is a demonstrated source of urban air pollution. Given this, the implementation of street sweeping strategies that effectively limit road dust accumulation and resuspension should be a public health priority. Research examining the effectiveness of street sweeping for road dust removal in support of good air quality has been limited to date. To address this, the study aimed to assess the use of a regenerative-air street sweeper to efficiently remove road dust particles and metal(loid)s in size fractions relevant for respiratory exposure in Toronto, Canada. As part of this, the mass amounts, particle size distribution and elemental concentrations of bulk road dust before and after sweeping at five arterial sites were characterized.Sweeping reduced the total mass amount of thoracic-sized (<10 µm) road dust particles by 76 % on average. A shift in the size distribution of remaining particles toward finer fractions was observed in post-sweeping samples, together with an enrichment in many metal(loid)s such as Co, Ti and S. Overall, the mass amounts of metal(loid)s of respiratory health concern like Cu and Zn were greatly reduced with sweeping. Traffic volume and road surface quality were predictors of dust loadings and elemental concentrations. Road surface quality was also found to impact street sweeping efficiencies, with larger mass amounts per unit area collected post-sweeping where street surfaces were distressed.This study demonstrates that street sweeping using advanced technology can be highly effective for road dust removal, highlighting its potential to support air quality improvement efforts. The importance of tailoring sweeping service levels and technologies locally as per the quality of road surface and traffic patterns is emphasized. Continued efforts to mitigate non-exhaust emissions that pose a respiratory health risk at their source is essential.

Effectiveness of Single Fetal Membrane Sweeping in Reducing Elective Labor Induction for Postdate Pregnancies (38+0 to 40+6 Weeks): A Randomized Controlled Trial.

Postdate pregnancy is characterized by a heightened risk for both maternal and perinatal complications. Owing to the risks, clinicians frequently turn to elective labor induction as a management strategy for postdate pregnancies. However, patients are increasingly informed and apprehensive about this approach and its associated risks. This has prompted a search for alternative management methods that may encourage spontaneous labor in pregnant women. One such approach is the use of fetal membrane sweeping, a method known to increase the likelihood of spontaneous labor onset. Yet, it remains unclear whether a single fetal membrane sweeping procedure can effectively reduce the need for elective labor induction in postdate pregnancies while minimizing risks to both the mother and fetus. The primary objective of this study was to assess the efficacy of a single fetal membrane sweeping procedure conducted between 38+0 and 40+6 weeks of gestation in reducing the rate of elective labor induction among postdate pregnancies at Central Hospital Benin City, Nigeria. Secondary objectives included evaluating the impact of membrane sweeping on maternal and perinatal outcomes. This open-label superiority randomized controlled study was carried out from June 2020 to March 2021, following ethical approval from the Hospital Management Board (HMB). One hundred and forty eligible participants, without contraindications to vaginal delivery, were randomly assigned to one of two groups. The first group received a single fetal membrane sweeping procedure between 38+0 and 40+6 weeks of gestation, while the control group underwent vaginal examination only to assess the Bishop score. Participants weremonitored until delivery.Data analysis was performed. Results were considered statistically significant at p < 0.05. The implementation of a single fetal membrane sweeping procedure effectively reduced the incidence of elective labor induction. Specifically, the membrane sweep group exhibited a significantly lower rate of elective labor induction compared to the control group (9.0% vs. 27.1%; p=0.0083). Moreover, a substantial proportion of the treatment group (91.4%) experienced spontaneous labor, while the control group reported a rate of 72.9%. Thedifference was statistically significant (p=0.0054). Notably, the control group exhibited a significantly longer mean time interval from recruitment to delivery (10.67±3.51 days) than the membrane sweeping group (3.64±4.123 days; p<0.05). Also, postdate women in the membrane sweep group were less likely to require cervical ripening with Foley's catheter than those in the control group (33.3% vs. 100%; RR: 0.33 (0.11-1.03); p=0.0057). Still, maternal satisfaction was significantly higher in the membrane-sweeping group (p<0.01). No significant differences were noted across the groups in maternal and neonatal outcomes. In low-risk term pregnancies, a single fetal membrane sweeping procedure is a superior alternative to no membrane sweeping in reducing the rate of elective labor induction for postdate pregnancies and in shortening the duration of term pregnancy.

Investigation of Polisher Head and Slurry Sweep Effect in Oxide Film Polishing

Abstract Chemical mechanical polishing (CMP) has undergone rapid advancements in global and local planarization. The synergy between the process control and the consumables is critical to overall CMP performance. In addition to optimizing consumables and equipment including a polisher, metrology, and inspection, the polishing protocol plays a crucial role in effective process management. In fabrication scenarios, protocol revision is a convenient and practical approach for problem-solving. This research focuses on the study of head sweep direction, head sweep distance, and slurry sweep effects in oxide film polishing. Sweeping toward the outside resulted in an average increase of 12.66% removal amount for ceria and 11.57% for silica compared to fixed head polishing. Moreover, a longer head sweep distance reduced non-uniformity. While the slurry sweep exhibited a non-significant effect on the removal amount, it proved valuable in optimizing the removal amount profile.

Modified stochastic diffusion particle tracking model driven by skew Brownian motion: Analysis of sediment particle motion in turbulent flow under the effects of ejection and sweep.

Turbulent bursting events have been classified into outward interactions (Q1), ejections (Q2), inward interactions (Q3), and sweeps (Q4) in various studies. Ejections (Q2) and sweeps (Q4) have been identified as significant contributors to time consumption, momentum flux, and sediment flux. Additionally, research has shown that the distribution of these events varies nonuniformly at different bed elevations. Despite extensive investigations into the nonuniform distribution of turbulent bursting events, their impact on sediment transport has been rarely explored. In this work, we developed a modified stochastic diffusion particle tracking model (SD-PTM) driven by skew Brownian motion (SBM) using the stochastic Lagrangian approach to scrutinize sediment particle movement in turbulent flows. The model incorporates turbulent characteristics derived from a direct numerical simulation dataset, allowing for a comprehensive analysis of sediment particle dynamics. Moreover, the proposed model accounts for the nonuniform spatial distribution of ejection and sweep events, as well as the particle movement direction during these events. Numerical simulations of the model were conducted to trace sediment particle trajectories in the streamwise and vertical directions. The analysis of sediment transport involved calculating the variance of particle trajectories to examine anomalous diffusion. The model's performance was evaluated by comparing it with flow velocity and sediment concentration profiles obtained from measurements in previous studies. In conclusion, our study suggests that the motion of sediment particles in turbulent flow can be thoroughly investigated under extreme flow conditions using the modified SD-PTM driven by SBM.

Cathepsin X deficiency alters the processing and localisation of cathepsin L and impairs cleavage of a nuclear cathepsin L substrate.

Proteases function within sophisticated networks. Altering the activity of one protease can have sweeping effects on other proteases, leading to changes in their activity, structure, specificity, localisation, stability, and expression. Using a suite of chemical tools, we investigated the impact of cathepsin X, a lysosomal cysteine protease, on the activity and expression of other cysteine proteases and their inhibitors in dendritic cells. Among all proteases examined, cathepsin X gene deletion specifically altered cathepsin L levels; pro-cathepsin L and its single chain accumulated while the two-chain form was unchanged. This effect was recapitulated by chemical inhibition of cathepsin X, suggesting a dependence on its catalytic activity. We demonstrated that accumulation of pro- and single chain cathepsin L was not due to a lack of direct cleavage by cathepsin X or altered glycosylation, secretion, or mRNA expression but may result from changes in lysosomal oxidative stress or pH. In the absence of active cathepsin X, nuclear cathepsin L and cleavage of the known nuclear cathepsin L substrate, Lamin B1, were diminished. Thus, cathepsin X activity selectively regulates cathepsin L, which has the potential to impact the degree of cathepsin Lproteolysis, the nature of substrates that it cleaves, and the location of cleavage.

Insights into Molecular Dynamics and Oil Extraction Behavior of the Polymeric Surfactant in a Multilayered Heterogeneous Reservoir.

Interlayer heterogeneity, an inevitable and complex challenge during water flooding, seriously constrains the spread of the sweep region and oil recovery enhancement in multilayered heterogeneous reservoirs. To overcome this challenge, a novel polymeric surfactant, having an excellent performance in the reduction of interfacial tension (IFT) and the increase of viscosity of displacing fluid, is applied for enlarging the sweep resonance and increasing the oil washing efficiency. Through the molecular dynamics (MD) simulation, the molecular distributing mechanisms of the polymeric surfactant at the oil-water interface are analyzed to provide the theoretical basis for explaining the microscopic mechanism of oil extraction. To directly reflect the microscopic behavior of oil extraction, multiple transparent sand-packed models are designed to investigate the flowing behavior of different fluids and the extracted mechanisms of the remaining oil in both pore and macroscales. The multilayered heterogeneous reservoirs consisting of high-, moderate-, and low-permeability layers are fabricated to represent a heterogeneous characteristic. The recognition from the visual experiment and MD simulation can study the performance control, the extracting performance of the remaining oil, and the expression of the displacing front from different perspectives. The results from MD simulation demonstrate that the polymeric surfactant can promote the disintegration of the remaining oil and enhance its mobility. The experimental results indicate that the sweep efficiency is restricted by viscous fingering and tongue advance. Through the analysis of mathematical models, the rising mobility ratio and the location of the displacing front have a strong positive relationship with viscous fingering and tongue advance, which can reasonably explain the plugging performance of the polymeric surfactant, greatly improving the sweeping effect of the whole reservoir. Moreover, the Marangoni effect generated by the IFT gradient can induce the transformation of interfacial energy to displacement kinetic energy by the emulsification of the oil-water interface so that the remaining oil in the blind-end pore can be effectively extracted. However, by comparing data from image quantification techniques and production dynamic performance, the sweep efficiency (484%) was significantly greater than that of oil recovery (300%), demonstrating that the expanded sweep effect still plays a dominant role in the extraction of remaining oil after polymeric surfactant flooding. This study provides a novel plugging and effective washing agent that is expected to be an excellent and comprehensive method for solving the problem of low oil recovery in multilayered heterogeneous reservoirs.

The electoral system and political parties in the municipal council elections of St. Petersburg

ABSTRACT This paper deals with an important and insufficiently studied problem relating to the ways in which Russia’s authorities use electoral process rules in order to enhance their political advantage at the local level. The well-established Duvergerian framework of electoral system analysis applies to a new context: municipal elections in Putin-era St. Petersburg. One of the effects of the “block vote” electoral system, which is currently the most common method used in the St. Petersburg municipal elections, is the sweep effect, wherein a party with a weak majority of support nevertheless is able to win a large number of seats. From the data on election results in St. Petersburg it can be interpreted that the electoral system used gave a significant bonus to the leading party. It is noteworthy that the leading position in some cases was occupied by the opposition parties, which used the bonus provided by the electoral system.

Assessing the effectiveness of membrane sweeping combined with cervical massage for term pre-induction cervical ripening: A single experimental study

Massage of the cervical region entails applying light pressure to the cervix to trigger the uterine contractions. Membrane sweeping, often called cervical sweeping or membrane stripping, releases hormones that may start labor by removing the amniotic sac from the uterine wall. Although membrane sweeping is helpful in several clinical trials, no studies have examined how effective cervical massage is when combined with membrane sweeping.This research compared the effectiveness of membrane sweeping and cervical massage as cervical ripening techniques in post-dated pregnancies before labor induction in specialized clinics. A total of 150 low-risk singleton pregnancies with a Modified Bishop Score (MBS) of fewer than five at 38 weeks of gestation were included. The experimental group received membrane sweeping with cervical massage, and the control group, which just received membrane sweeping, was randomly allocated to the participants. 48 hours after the intervention, changes in the MBS were used to gauge cervical favorability. Neonatal morbidity, membrane rupture, intrapartum and postpartum infections, and other complications were assessed.The mean ages and MBS of the primigravidae in the two research groups at induction were similar. After the intervention, the trial group's mean MBS was significantly higher than the control groups. Because of this, primigravidae observed a substantial change in the MBS after the operation. The experimental group's adverse effects and neonatal morbidity were comparable, except cardiotocographic abnormalities were observed more often in the control group.In some cases, when membrane sweeping cannot be conducted because of a closed cervical os, cervical massage combined with membrane sweeping appears successful and secure. A significant choice for obstetric care, this technique may aid cervical softening in post-dated pregnancies.

Exploration of Sweeping Effect: Droplet Coalescence Jumping of a Rolling and Static Droplet.

The sweeping effect of merged droplets plays a key role in enhancing application performance due to the continuing coalescence caused by the horizontal jumping velocity. Most studies focused on static droplet coalescence jumping, while moving droplet coalescence is poorly understood. In this work, we experimentally and numerically study the coalescence of a rolling droplet and a static one. When the droplet radius ratio is larger than 0.8, as the dimensionless initial velocity increases and the vertical jumping velocity first decreases and then increases. The critical dimensionless initial velocity Vc* corresponding to the minimum vertical jumping velocity could be estimated as . When the droplet radius ratio is smaller than 0.8, the dimensionless initial velocity has a positive effect on the vertical jumping velocity. The mechanism of the vertical jumping velocity can be attributed to two parts: liquid bridge impact and retraction of the merged droplet. The squeezing effect generated by the initial velocity between the two droplets promotes the growth of the liquid bridge and enhances the impact effect of the liquid bridge but weakens the upward velocity accumulation caused by the retraction of the merged droplets. However, different from the vertical jumping velocity, the horizontal jumping velocity is approximately proportional to the dimensionless initial velocity. The outcome of our work elucidates a fundamental understanding of a rolling droplet coalescing with a static one.

A comparative analysis of gas mixing during the underground hydrogen storage in a conventional and fractured reservoir

Climate change and political tensions are reducing the time for the energy transition. Large-scale underground hydrogen storage (UHS) can be crucial in future energy systems for decarbonizing the world's economy as well as ensuring energy security. There are challenges, however, that prevent it from being used on large scale as an energy carrier. The high cost of hydrogen cushion gas is one of them. It is not economical that a portion of hydrogen remains in a reservoir as a cushion gas during UHS until the end of a storage operation. Consequently, inert gases such as nitrogen can be used as cushion gas. Hydrogen's heating value gets reduced, however, due to gas mixing. Since gas mixing behavior differs in reservoirs with different mechanisms, hydrogen heating value was employed to examine the gas mixing behavior during UHS in conventional and fractured reservoir models (dual-porosity) for the first time in this study. The mixing behavior of hydrogen gas with replaced cushion gas will first be examined in the absence and presence of diffusion using a conventional gas reservoir model. Then some reservoir and operational parameters will be investigated in order to determine how they affect the gas mixing behavior, including reservoir porosity, permeability, rock compressibility, and cushion gas type. Next, a basic UHS scenario with dual-porosity will be examined to determine how hydrogen gas and cushion gas mix in the presence and absence of diffusion and the effects of specific parameters on gas mixing behavior in the fractured reservoir (NFR) model, including matrix-fracture transmissibility and cushion gas type. According to the results, in the conventional reservoir model, considering diffusion during early hydrogen production results in a decrease in hydrogen heating value. While in the second stage of hydrogen production, diffusion increases the hydrogen heating value, resulting from the sweeping effect. Dual-porosity models illustrate the opposite behavior. As well, porosity reduction resulted in higher hydrogen heating values during early production but reversed during late production. Unlike the effect of rock compressibility on heating value of hydrogen, a lower hydrogen heating value was obtained during hydrogen production as the reservoir permeability increased. Also, carbon dioxide cushion gas showed reversed effect on gas mixing during UHS in the conventional compared to the NFR case.

A Simplified Optimization Model for Hydrokinetic Blades with Diffuser and Swept Rotor

The use of a diffuser in hydrokinetic turbines can improve the power coefficient. However, the risk of cavitation in the rotor blades increases. Studies suggest that backward-curved blades can reduce the axial load on the rotor and therefore prevent cavitation. Therefore, this work develops an optimization procedure applied to backward-curved blades in hydrokinetic turbines with diffusers based on the Blade Element Momentum Theory. The main contribution is to consider both the sweep effect and the presence of a diffuser in the optimization in an innovative way. We use a radial transformation function that adjusts the radial position considering the curvature of the blade during optimization under the effect of the diffuser. The results showed that the increase in blade curvature resulted in greater chord distributions and twist angles, especially at the blade tips. The Prandtl’s loss factor was not sensitive to sweep, but the linked circulation increased at the blade tips, suggesting an increased risk of cavitation. Depending on the sweep angle, the optimized blades were able to mitigate or avoid cavitation. In particular, a sweep angle of 30∘ eliminated cavitation. This study indicated that the proposed optimization can effectively prevent cavitation, showing satisfactory results.

The crucial role of nMOFs in H2S absorption process using ionic liquid solution based nanofluid systems

Ionic liquid solutions based of polyamines were synthesized and used for H2S removal. The results of simulation calculation and characterization showed that ionic liquid trap H2S by forming hydrogen bonds. Five nanometer-sized MOFs (nMOFs) were synthesized and added into ionic liquid solutions to build nanofluid systems. The effects of types, particle size, concentration, and regeneration gas of nanoparticles on the desulfurization performance of different nanofluids were explored. The addition of nMOFs with appropriate types and concentrations showed significant enhancement effect on the H2S absorption of liquid. Among five nMOFs, the systems of HKUST-1 and MIL-101(Fe) had high enhancement as well as regeneration performance at low concentrations (0.05 %). Based on sweep effect, gas–liquid mass transfer was enhanced by nMOFs due to the quickly capture and release of H2S. Furthermore, in this work, an “enrichment effect” has been proposed, in which H2S molecular enrichment zones were formed around nanoparticles, promoting gas–liquid reactions. The nanoparticles at different stages were characterized using X-ray photoelectron spectroscopy, scanning electron microscope, transmission electron microscope and energy dispersive spectrum, and the results confirmed that nMOFs have the ability to enrich H2S, which play a catalyst-like and accelerator-like role in H2S absorption process.

Removal of fine solids from bitumen by hetero-aggregation and magnetic separation using surface-modified magnetite nanoparticles. Part 2: Role of surface modification

Stearylamine acetate (SAA) modified magnetite nanoparticles (MNPs) have been previously proven to significantly improve the efficiency of fine solids removal from cyclohexane-diluted non-aqueous extracted (NAE) bitumen following magnetic separation. In this work, asphaltene-modified magnetite nanoparticles (Asp-MNPs) were prepared, and their ability to remove fine solids from NAE bitumen was evaluated. The influence of the surface modification with SAA or asphaltene on MNPs in their interactions with NAE fine solids was studied through quartz crystal microbalance with dissipation monitoring and atomic force microscopy studies. It was demonstrated that modification by SAA increased the adhesion interaction between the MNPs and NAE fine solids through a bridging effect. The use of an external magnetic field also strengthened the hetero-aggregation between surface-modified MNPs and the NAE fine solids. Though the asphaltene modification of MNPs resulted in a repulsive behavior in the interaction between MNPs and NAE fine solids due to steric effect, the applied external magnetic field could drive the Asp-MNPs together and induce the bridging among the Asp-MNPs through an interdigitation process, and the NAE fine solids could be captured through a sweeping effect by the networked Asp-MNPs.

Laminar post-stall wakes of tapered swept wings

While tapered swept wings are widely used, the influence of taper on their post-stall wake characteristics remains largely unexplored. To address this issue, we conduct an extensive study using direct numerical simulations to characterize the wing taper and sweep effects on laminar separated wakes. We analyse flows behind NACA 0015 cross-sectional profile wings at post-stall angles of attack $\alpha =14^\circ$ – $22^\circ$ with taper ratios $\lambda =0.27$ – $1$ , leading-edge sweep angles $0^\circ$ – $50^\circ$ and semi aspect ratios $sAR =1$ and $2$ at a mean-chord-based Reynolds number of $600$ . Tapered wings have smaller tip chord length, which generates a weaker tip vortex, and attenuates inboard downwash. This results in the development of unsteadiness over a large portion of the wingspan at high angles of attack. For tapered wings with backward-swept leading edges, unsteadiness emerges near the wing tip. On the other hand, wings with forward-swept trailing edges are shown to concentrate wake-shedding structures near the wing root. For highly swept untapered wings, the wake is steady, while unsteady shedding vortices appear near the tip for tapered wings with high leading-edge sweep angles. For such wings, larger wake oscillations emerge near the root as the taper ratio decreases. While the combination of taper and sweep increases flow unsteadiness, we find that tapered swept wings have more enhanced aerodynamic performance than untapered and unswept wings, exhibiting higher time-averaged lift and lift-to-drag ratio. The current findings shed light on the fundamental aspects of flow separation over tapered wings in the absence of turbulent flow effects.

Numerical and experimental study on double coaxial gas assisted water jet guided laser machining of superalloy

To achieve more uniform gas film and higher working temperature, the design of film holes on combustion section parts of aero engine is developing towards three trends: smaller diameter, higher aspect ratio and more quantity. To realize the high quality manufacture of small film holes with high aspect ratio, a new water jet guided laser (WJGL) machining method based on double coaxial assistant gas was proposed in this article. An outer coaxial gas jet with high density was added to the existing coaxial jet of water and helium. That outer coaxial gas jet can weaken the interference effect of reverse water and sweep out the low speed water in deep blind hole. The sweep effect of outer coaxial assistant gas was confirmed by simulation and experimental results. The penetration time of Ф0.7 mm holes with depth of 4 mm decreased from 410 s to 173 s with the help of outer coaxial assistant gas. A series of Ф0.7 mm holes with the aspect ratio of 14.6:1 were machined using double coaxial assistant gas WJGL method on superalloy specimens with thermal barrier coatings (TBCs). The roughness of side wall was better than 0.6 μm, and no breakage or stratification was found at the interface of TBCs and matrix. This method can also be used in the manufacture of SiC/SiC ceramic matrix composites (CMCs) parts with deep small holes.