Effects Of Rare Earth Elements Research Articles

Minimizing vacancy defects with Eu passivation strategy to enable highly efficient perovskite photovoltaics

The intrinsic ionic nature of metal halide perovskites facilitates the formation of abundant defects at grain boundaries (GBs) and surfaces, consequently diminishing the stability and photovoltaic performance of perovskite solar cells (PSCs). Due to the low formation energies and instability of Pb-I bonds, iodine (I) and lead (Pb) vacancies are prevalent high-density point defects. In this study, we explore the use of europium (Eu) as a novel passivator to concurrently address I and Pb vacancies through first-principles calculations. Our results demonstrate that Eu significantly lowers the defect formation energies and adjusts the bandgap, enlarged by vacancy defects, to align with the ideal Shockley-Queisser limit, indicating a strong potential for achieving high power conversion efficiency (PCE). Furthermore, Eu passivation markedly increases the activation energy barriers for ion migration, resulting in substantially reduced migration rates. This suggests a minimal likelihood of I and Pb ion migration on defected surfaces, underscoring Eu’s potential to mitigate hysteresis effects and enhance stability. This work advances our understanding of the passivation effects of rare earth elements and establishes a foundation for designing highly effective passivation strategies to achieve stable and efficient PSCs.

Improvement of microstructure and dielectric properties of Zn1.8SiO3.8 ceramics by doping with rare earth elements (La, Pr, Nd, Sm)

The current crucial focus is improving the performance of microwave dielectric ceramics, aiming for a low dielectric constant and minimal dielectric loss for millimeter-wave applications. In this study, we successfully synthesized Zn1.8SiO3.8-RO (R=La, Pr, Nd, Sm) microwave dielectric ceramics, namely ZLSO, ZPSO, ZNSO, and ZSSO, using the solid-state reaction sintering method. X-ray diffraction peaks indicated that the main phase matched the standard Zn2SiO4 diffraction peaks. As the dopant ion radius increases from Sm³⁺ to La³⁺, the diffraction peak shifts to a lower angle and the cell volume increases. Scanning electron microscopy revealed that the ZLSO, ZPSO, ZNSO, and ZSSO ceramics displayed denser and more uniform grain shape, along with a significant decrease in the densification temperature (1200°C-1250°C) compared to the Zn1.8SiO3.8 (1350°C-1400°C). Further research indicated that substituting rare earth ions maintained a low εr while effectively increasing the Q×f values. The specific properties are as follows: ZLSO: εr = 7.06, Q × f = 59,314GHz, τf = -25.00 ppm/℃; ZPSO: εr = 7.02, Q × f = 111,184GHz, τf = -17.77 ppm/℃; ZNSO: εr = 7.02, Q × f = 127,711GHz, τf = -33.52 ppm/℃; ZSSO: εr = 7.06, Q × f =108,435GHz, τf = -22.9 ppm/℃. Among them, ZNSO exhibited the best microwave dielectric performance. The research not only effectively produces microwave dielectric ceramics with outstanding performance but also systematically uncovers the distinct effects of rare earth elements doping on the dielectric properties of silicate systems. This provides the theoretical groundwork for utilizing 5G millimeter wave bands.

Effect of Rare Earth Y and Metal X (Co, Mn, Ni, Cu) Elements on Cr Diffusion Behavior of SOFC Metallic Interconnect

ABSTRACTAt present, the metallic interconnects of the solid oxide fuel cell (SOFC) can result in Cr poisoning problem of cathode after long‐term high‐temperature oxidation. Such problem seriously affects the efficiency of battery power generation. In order to optimize the performance of the metallic interconnect, this paper firstly studies the doping effect of rare earth element Y and metal element X (Co, Mn, Ni, Cu) on the diffusion behavior of Cr at the FeCr/Cr2O3 interface by the first principles method. The Cr diffusion pathway and energy barriers under different elemental doping models are calculated by CI‐NEB method. Based upon the theoretical results, the Mn1.8CoY0.2O4 spinel coating is further deposited on the surface of Crofer 22 APU substrate by sol–gel and electrophoretic deposition method to verify the theoretical results. The performance of the coating samples after high‐temperature oxidation are tested and analyzed. The experimental results show that the Mn1.8CoY0.2O4 spinel coating significantly improves the high‐temperature antioxidation, Cr resistance performance, and electrical conductivity of the interconnect, providing a feasible solution for solving the Cr poisoning problem in cathode and accelerating the application of Crofer 22 APU alloy materials in SOFC metallic interconnects.

Comparative investigation of the effect of rare earth elements (Y, Sm and La) in NiO-based NTC thermistors with high temperature sensitivity

Negative temperature coefficient (NTC) thermistors with high temperature sensitivity have significance to the high-accuracy applications for temperature measurement and control. While, a NTC thermistor with high temperature sensitivity is typically accompanied by high room temperature resistivity (ρ25), and vice versa. To develop NTC thermistors with high temperature sensitivity and low ρ25, NiO-based ceramics modified with rare earth (RE) elements (Y, Sm and La) were prepared using the traditional solid-phase reaction method. The microstructure, morphology and electrical properties of these ceramics were thoroughly investigated. All ceramics doped with different concentrations of RE ions exhibited the main phase of rock-salt NiO structure and demonstrated typical NTC characteristics. Depending on the RE ion content, the prepared ceramics presented adjustable properties, low ρ25 and NTC material constant B higher than 5200 K can be received. The differences in conduction behavior and temperature sensitive characteristics affected by the RE ions were comparatively investigated, considering both grain effect and grain boundary effect.

Effect of rare earth element Y on the crack propagation behavior of Mg alloys: A molecular dynamics simulation

The effect of the distribution and concentration of rare earth (RE) element Y, crack orientation, temperature, and strain rate on the crack propagation behavior of the Mg alloys is investigated by molecular dynamics/Monte Carlo simulations. The results show that the RE element Y tends to form locally short-range order structures in the Mg alloys, and the introduction of the RE element Y can enhance the fracture toughness of the Mg alloys. The results indicate that with the increase of Y concentration, the crack propagation mode of the Mg alloys shifts from a mode, dominated by the dislocation emissions at the crack tip and the crack cleavage propagation to a mode dominated by the solid-state amorphization and the slip of amorphous bands. In addition, the results show that the faster the strain rate, the slower the crack propagation speed, and the crack propagation resistance increases with increasing temperature.

The Analysis of the Effect of Mischmetal Addition on the Formation of Non-Metallic Inclusions in Liquid Steel

The study focuses on the effect of rare earth elements (REM) in mischmetal on the morphology and chemical composition of non-metallic inclusions in pre-oxidised steel. Calculations were carried out using the WYK_STAL computer program according to two calculation models, considering/ignoring the sulphur partition coefficient at the liquid steel-liquid slag interfacial boundary. It was found that the chemical composition of the resulting precipitates is a consequence of the order in which deoxidising additives were admixed. Simulations confirmed the presence of Ce oxides and sulphides. This was also confirmed by the analysis of samples taken from the steel ingot after laboratory melting. Non-metallic inclusions Ce2O3 and CeS, and the complex of precipitates: La2O3-Ce2O3 was also identified in the steel. Introduction of mischmetal in the final stage refining is the most effective method. Therefore, the oxygen content is reduced below 0.001%, and the sulphfur content can be reduced to 0.004%.

Assessing the physiological responses and uptake patterns of lanthanum and yttrium in rice and Phytolacca americana L.

The effects of rare earth elements (REEs) on plant physiology and bioaccumulation characteristics vary significantly. As a result, considerable attention has been directed towards the effects and toxicity of REEs on plants. REEs migrate and transform in the environment and are absorbed by plant roots. However, different plants exhibit varying capacities to absorb REEs, leading to diverse impacts on their growth. In our study, we subjected seedlings of rice and Phytolacca americana L. to a gradient of lanthanum and yttrium (La + Y) concentrations to evaluate the physicochemical effects and uptake patterns of these elements. We meticulously measured variables such as biomass, root length, and elemental concentrations of La and Y, as well as macronutrients (P, Na, K, Mn, Fe, Mg, Ca) and micronutrients (Cu, Zn) to decode the physiological responses to varying levels of La + Y exposure. Based on the known dualistic nature of REEs interaction with plants, our results reveal that the threshold of REEs to different plants is different, and this conclusion can serve well for the formulation of rare earth pollution remediation strategies. Importantly, the accumulation of La and Y in P. americana L. roots was significantly greater than in rice roots, by an order of magnitude, reflecting the unique uptake capacities of hyperaccumulators. Additionally, this research found that nutrient dynamics and the absorption patterns of La and Y within the plants diverged, suggesting that La uptake in P. americana L. may occur via Ca2+ ion channels. These insights enhance our understanding of REE-plant interactions and have broader implications for agriculture and environmental health.

Effect of rare earth element Y addition on the corrosion resistance of Cu-12.5Ni-5Sn alloy after aging

Cu-12.5Ni-5Sn-xY alloy with different rare earth Y contents was prepared by spark plasma sintering (SPS). The samples underwent aging at approximately 400°C for 4 hours in an energy-saving box furnace. The effect of trace Y addition on the microstructure and corrosion behavior of aging treated Cu-12.5Ni-5Sn-xY alloy were investigated by electrochemical test, and the corrosion mechanism of the alloy was discussed. The results indicated that the addition of rare earth Y improved the uniformity of microstructure and grain size of the alloy, and improved the corrosion resistance of the alloy. When the Y content changed between 0 wt% and 1.0 wt%, the corrosion resistance of the Cu-12.5Ni-5Sn-xY alloy gradually improved. The Cu-12.5Ni-5Sn-1.0Y alloy had a lower self-corrosion current density (1.490×10−5A/cm2) and a lower corrosion rate (0.178 mm/a). Compared to the Cu-12.5Ni-5Sn alloy without Y addition, the maximum corrosion depth was reduced by about 44.6 % and the corrosion resistance was improved. Rare earth Y promoted the uniform distribution of Ni elements, inhibited the conversion of Cu2O to Cu2(OH)3Cl, enhanced the layer density and stability. The internal corrosion layer mainly consisted of NiO, the intermediate layer mainly consisted of SnO, and the surface layer mainly comprised of CuO, Cu2O, and Cu2(OH)3Cl. Additionally, Y2O3 formed on the alloy's surface, effectively prevented corrosive ion attack and enhanced the corrosion resistance of Cu-12.5Ni-5Sn alloy.

Rare earth elements and warming: Implications for adult mussel health and sperm quality

The present study aimed to investigate the effects of europium (Eu) exposure (10 μg/L), warming (a 4 °C increase), and their combination on Mytilus galloprovincialis. Biochemical and histopathological changes in adult mussels were evaluated after a 28-day exposure period. Additionally, biochemical and physiological alterations in sperm were measured following a 30-min exposure period. The overall responses to each treatment were assessed using the Integrated Biological Response index version 2 (IBRv2). In adult mussels, warming elevated metabolism and activated glutathione S-transferases (GSTs), leading to redox imbalance and cellular damage. Europium exposure alone slightly enhanced metabolism and GSTs activity, resulting in cellular damage and histopathological injuries in digestive tubules. The combined exposure to Eu and warming was the most detrimental treatment for adults, as indicated by the highest IBRv2 value. This treatment slightly increased metabolism and uniquely elevated the activity of antioxidant enzymes, as well as GSTs and carboxylesterases. Despite these responses, they were inadequate to prevent redox imbalance, cellular damage, and histopathological injuries in digestive tubules and gills. Regarding sperm, warming reduced reactive oxygen species (ROS) production but raised lipid peroxidation levels. Sperm exposed to this treatment also increased their oxygen consumption and exhibited reduced velocity. The IBRv2 indicated that Eu was the most harmful treatment for sperm, significantly increasing ROS production and notably decreasing sperm velocity. When combined with warming, Eu elevated superoxide anion (O2-) production, lowered sperm velocity, and increased oxygen consumption. This study underscores the importance of investigating the effects of rare earth elements and their interaction with climate change-related factors.

Effect of rare earth element on H13 microscopic structure and mechanical properties

In view of the phenomenon that irregular inclusions are easy to use as crack sources, rare earth H13 steel with different gradients is designed. The results showed that ellipsoidal rare earth inclusions (Ce2O3, CeAlO3 and Ce2O2S) were formed from irregular Al2O3 inclusions with the assistance of rare earths. The carbides that precipitated from liquid phases were arranged in a network along the grain boundary, forming composite carbides that are rich in Mo and V. Along the grain boundary, the morphology of the composite carbides got finer, and MC-type carbides enclosed the modified inclusions into nuclei, facilitating their precipitation. After annealing, the microstructure revealed that the carbides were dispersed in black segregated patches along the grain boundary and were discontinuous. The average diameter of carbides decreased from 109.7 to 79.2 nm in the same region according to a statistical comparison of the number of carbides before and after the addition of rare earth elements. The carbides were distributed alongside primary carbides as tiny particles of M7C3 and M23C6 secondary carbides. Especially when the rare earth content was 0.032 wt-%, the impact toughness increased to 34%. This work offers a reference value for the practical application of rare earth in hot work die steel in addition to revealing the strengthening mechanism of ultra-high strength RE-13 steel.

Lanthanum nitrate demonstrated no genotoxicity in the conducted tests

Given the widespread applications in industrial and agricultural production, the health effects of rare earth elements (REEs) have garnered public attention, and the genotoxicity of REEs remains unclear. In this study, we evaluated the genetic effects of lanthanum nitrate, a typical representative of REEs, with guideline-compliant in vivo and in vitro methods. Genotoxicity assays, including the Ames test, comet assay, mice bone marrow erythrocyte micronucleus test, spermatogonial chromosomal aberration test, and sperm malformation assay were conducted to assess mutagenicity, chromosomal damage, DNA damage, and sperm malformation. In the Ames test, no statistically significant increase in bacterial reverse mutation frequencies was found as compared with the negative control. Mice exposed to lanthanum nitrate did not exhibit a statistically significant increase in bone marrow erythrocyte micronucleus frequencies, spermatogonial chromosomal aberration frequencies, or sperm malformation frequencies compared to the negative control (P > 0.05). Additionally, after a 24-h treatment with lanthanum nitrate at concentrations of 1.25, 5, and 20 μg/ml, no cytotoxicity was observed in CHL cells. Furthermore, the comet assay results indicate no significant DNA damage was observed even after exposure to high doses of lanthanum nitrate (20 μg/ml). In conclusion, our findings suggest that lanthanum nitrate does not exhibit genotoxicity.

Study of effects of rare earth elements on the corrosion behavior of weathering steels under a simulated immersion environment and a real atmospheric environment

AbstractThe effects of rare earth elements (REEs) on the corrosion behavior of weathering steels under a simulated immersion environment and a real atmospheric environment have been investigated in this paper. Although the corrosion rate of the indoor accelerated corrosion experiment (0.01 mol/L NaHSO3) is much higher than that of the real atmospheric exposure experiment, the addition of REEs can highly improve the corrosion resistance of test steels under both conditions. The improvement of the corrosion resistance can be attributed to the quick transformation of γ‐FeOOH into α‐FeOOH and the accelerated formation of a stable rust layer by REEs. Furthermore, the segregation of the REE inner rust layer increases the density of the rust layer and prevents corrosive particles from eroding the matrix. REEs can also promote the segregation of Cu, Cr, and other alloying elements in the rust layer, thus blocking the cracks and holes and enabling the formation of a continuous rust layer with good adhesion.

Exploring synergistic and individual causal effects of rare earth elements and renewable energy on multidimensional economic complexity for sustainable economic development

The ongoing global energy transition has highlighted the instrumental role of rare earth elements (REEs) in achieving green growth through the deployment of renewable energy technologies, establishing a hypothetical progressive synergistic association between them. Therefore, testing this hypothetical synergy and its potential causal effects on economic and technological proxies based on empirical foundations becomes imperative in addressing rampant climatic change. First, we employed Deep Learning algorithms to explore the combined effects of this synergy on Multidimensional Economic Complexity (MEC) as an index using panel data of the largest producers of REEs from 1990 to 2023. Second, Temporal Causal Modelling (TCM) was employed to unveil the directional causality between REEs and renewable energy, as well as their causal roles in driving economic complexities. The deep learning models accurately predicted the positive role of this synergistic relationship in promoting overall MEC. Then, the results of TCM reveal that REE production increases renewable energy use and reduces CO2 emissions. Renewable energy promotes Research and Technology complexities while REE production affects them indirectly through renewables. It implies that harnessing this synergy to enhance economic complexities can, in turn, bolster green economic and technological development while mitigating CO2 emissions and addressing pervasive climate change.

The Role of Rare Earths on Steel and Rare Earth Steel Corrosion Mechanism of Research Progress

Corrosion has always been an important factor affecting the life of steel, which causes huge economic losses every year. How to improve the corrosion resistance of steel has always been a research focus. Adding rare earth elements into steel is an important method to improve the corrosion resistance of steel. In this paper, the effects of rare earth elements on steel are summarized, including the purification of molten steel, modification and modification of inclusions, improvement of grain boundaries by solid solution strengthening, the influence of phase transformation and the refinement of microstructure, and reduction in C and N desolubilization. On this basis, the progress of research on the corrosion resistance mechanisms of rare earth steel is summarized, focusing on rare earth-modified inclusions. This includes the changes in composition and sizes of inclusions by rare earth addition, promoting the transformation of MnS and Al2O3 in rare earth inclusions with regular shapes, smaller sizes and better performance, or composite rare earth inclusions. The corrosion pits that form in the early stages of corrosion are shallow in depth, fewer in number and light in corrosion degree. The effects of rare earth materials on the rust layer include: rare earth promotes the formation of a more stable corrosion product α-FeOOH, and rare earth promotes the formation of a dense rust layer, which covers the surface of the matrix and hinders the transmission of corrosion ions. The protective effect of the rare earth atomic layer on the substrate and the corrosion inhibition effect of rare earth ions are formed by the segregation of rare earth at the interface. In the end, the existing problems in the research into rare earth steel and future research directions are briefly put forward, including improving the addition process of rare earth steel, theoretical guidance on enhancing the corrosion resistance mechanism of rare earth steel, and extending the research from La, Ce, and Y steel to more rare earth steels.

Effect of Rare Earth Elements on Microstructure and Tensile Behavior of Nb-Containing Microalloyed Steels.

The present investigation endeavors to explore the influence of rare earth elements on the strength and plasticity characteristics of low-carbon microalloyed steel under tensile loading conditions. The findings from the conducted tensile tests indicate that the incorporation of rare earths leads to a notable enhancement in the yield strength, ultimate tensile strength, and ductility properties of the steel. A comparative analysis of the microstructures reveals that the presence of rare earths significantly refines and optimizes the microstructure of the microalloyed steel. This optimization is manifested through a reduction in grain size, diminution of inclusion sizes, and a concomitant rise in their number density. Moreover, the addition of rare earths is observed to foster an increase in the volumetric fraction of carbides within the steel matrix. These multifaceted microstructural alterations collectively contribute to a substantial strengthening of the microalloyed steel. Furthermore, it is elucidated that the synergistic interaction between rare earth elements and both carbon (C) and niobium (Nb) in the steel matrix augments the extent of the Lüders strain region during the tensile deformation of specimens. This phenomenon is accompanied by the effective modification of inclusions by the rare earths, which serves to mitigate stress concentrations at the interfaces between the inclusions and the surrounding matrix. This article systematically evaluates the modification mechanism of rare earth microalloying, which provides a basis for broadening the application of rare earth microalloying in microalloyed steel.

Effect of Doping Trace Rare Earth Elements on Corrosion Behavior of EH36 Offshore Platform Steel

EH36 offshore platform steel, La (0.0031%) steel, Ce (0.0027%) steel, and Pr (0.0001%) steel were selected as the research objects. The corrosion of four groups of steel was simulated by immersion experiments. In the presence of Cl− the effect of rare earth elements (La, Ce, Pr) on corrosion was investigated by the weight loss method. The morphology of the corrosion products and the apparent morphology after the removal of the corrosion products were observed by scanning electron microscopy (SEM); the main components of four steel corrosion products were analyzed by X-ray diffraction (XRD). The electrochemical behavior and the influence of temperature and Cl− concentration on the corrosion of the four kinds of steel were analyzed by an electrochemical polarization curve and Nyquist diagram. The results showed that the addition of trace rare earth elements, La, Ce, and Pr, to EH36 offshore platform steel can reduce the corrosion rate and the corrosion current density (Icorr), and increase the charge transfer resistance during the corrosion process. The Icorr of La steel, Ce steel, and Pr steel is 6.59 × 10−5 A·cm−2, 7.57 × 10−5 A·cm−2, and 9.53 × 10−5 A·cm−2, respectively, which is lower than that of EH36 steel (Icorr = 1.82 × 10−4 A·cm−2). The influence of Cl− concentration and temperature on the four steels showed the same trend; that is, with the increase in Cl− concentration, the corrosion rate first rises and then slows down, and with the increase in temperature, the corrosion rate gradually accelerates. Rare earth elements promote the production of more α-FeOOH in the rust layer, and the compactness of this product plays a certain role in protecting the steel matrix. The addition of trace rare earth elements, La, Ce, and Pr (less than 0.004%), improves the corrosion resistance of EH36 steel.

Effects of Ce on the precipitation behaviors and creep properties in 316LN austenitic stainless steel

The effects of Ce on the precipitation behaviors and creep properties in 316LN austenitic stainless steel (316LN) were studied by experiments and first-principles calculations. It was found that Ce in 316LN induces intragranular Laves phase precipitates with an average diameter of 166 nm. Aside from Ce rich in TiN nanoparticles facilitating Laves phase precipitation by heterogeneous nucleation, the solute Ce atom attracting its surrounding Mo atoms favors Laves phase precipitation by homogeneous nucleation. These intragranular Laves phases strongly impede the dislocation climbing and thus enhance the creep resistance. Here, 0.032 wt% Ce addition in 316LN considerably extends the creep life from 313 h to 556 h at 700 °C/150 MPa. These results provide a new insight into profoundly understanding the microalloying mechanism and effects of rare earth elements in heat-resistant steels.

Anti-fading study of Al–Ti–B by adding Ce on 6111 aluminum alloy

It is a practically significant issue to overcome the low efficiency and the short action time of Al–Ti–B master alloy for the grain refinement of aluminum alloys. In this paper, the phase relationship of the Al–Ti–B–Ce system, the effect of rare earth elements on the evolution of the morphology of the refining phases TiB2 and Al3Ti, and the effect of the refiners on the microstructure and properties of the 6111 alloy are investigated. The experimental results show that the addition of rare earths introduces the rare earth phase Ti2Al20Ce into Al–Ti–B. The rare earth phase acts as an effective protective shell, reduces the free energy of Al3Ti, prevents further movement at the Solid/Liquid interface, and inhibits the aggregation and growth of the Al3Ti phase. By adsorbing on the surface of the TiB2 phase, the rare earth reduces the surface energy and size of the TiB2 phase, thus reducing the possibility of agglomeration. The fine and dispersed refining phase results in more effective nucleation sites in the melt, which can maintain grain refining for a long time and has better anti-fading effect. Therefore, the grain refiner Al–5Ti–B + Ce can effectively refine the grain of 6111 alloy, reduce the grain refinement fading shortcoming, and improve the strength and ductility of 6111 aluminum alloy.

Case study of fluorite mineralization using traditional and laser spectroscopic techniques, homret akarem area south eastern desert, Egypt

Green fluorite samples from Homret Akarem, eastern desert Egypt, were investigated by laser-based Raman spectroscopy to study the effect of rare earth elements (REEs) and natural radiation from the surrounding environment on their physico-chemical properties, taking into consideration the geological setting. Geochemical data of trace elements display fluorite enrichment with Y, Pb, Sr, Sn, and other REEs. XRD showed lattice parameters with values higher than those for synthetic fluorite due to the substitution of Ca by Sr and less likely by radiation from U. A considerable shift in the binding energy (BE) for Ca and F obtained from the XPS spectrum indicates that U carried by the hydrothermal solutions formed a discontinuous thin film on the surface of fluorite. Laser-Raman spectroscopy showed strong peaks below 500 cm−1 and both shallow and weak peaks above 500 cm−1. The strong peaks indicate that the substitution of Ca by Sr, point defects, and natural radiation caused by U have a stronger effect on the crystal structure than REEs. Raman spectroscopy supported the initial reports of uranium minerals like Rutherfordine, Kasolite, Soddyite, and Uranophane-alpha.

Evaluation of Holmium(III), Erbium(III), and Gadolinium(III) Accumulation by Cyanobacteria Arthrospira platensis Using Neutron Activation Analysis and Elements' Effects on Biomass Quantity and Biochemical Composition.

Rare-earth elements are released into the aquatic environment as a result of their extensive use in industry and agriculture, and they can be harmful for living organisms. The effects of holmium(III), erbium(III), and gadolinium(III) when added to a growth medium in concentrations ranging from 10 to 30 mg/L on the accumulation ability and biochemical composition of Arthrospira platensis were studied. According to the results of a neutron activation analysis, the uptake of elements by cyanobacteria occurred in a dose-dependent manner. The addition of gadolinium(III) to the growth medium did not significantly affect the amount of biomass, whereas erbium(III) and holmium(III) reduced it up to 22% compared to the control. The effects of rare-earth elements on the content of proteins, carbohydrates, phycobiliproteins, lipids, β carotene, and chlorophyll a were evaluated. The studied elements had different effects on the primary biomolecule content, suggesting that holmium(III) and erbium(III) were more toxic than Gd(III) for Arthrospira platensis.