Effect Of Measurement Technique Research Articles

Effect of measurement techniques and operators on measured deviations in digital implant scans

ObjectivesTo evaluate the effect of different measurement techniques and operators on measured deviations in vitro implant scans. MethodsA 2-piece system that comprises a healing abutment (HA) and a scan body (SB) was mounted onto an implant at right first molar site of a polymethylmethacrylate mandibular dentate model. Model was digitized by using an industrial scanner (reference model scan, n = 1) and an intraoral scanner (test scan, n = 20). All standard tessellation language files were imported into a 3-dimensional analysis software and superimposed. Three operators with similar experience performed circle-based and point-based deviation analyses (n = 20). Deviations measured with different techniques were compared with paired samples t-test within each operator, while the reliability of the operators was assessed by using F-tests for both technqiues (α = 0.05). ResultsPoint-based technique resulted in lower deviations than circle-based technique for all operators (P = .001) with to higher reliability among operators (ICC = 0.438, P = .001). The correlation among the operators was nonsignificant when circle-based technique was used (ICC = 0.114, P = .189). ConclusionLower deviations were detected with the point-based technique. In addition, different operators’ measurements had higher correlation when point-based technique was used compared with circle-based technique. Clinical significancePoint-based technique may be preferred over circle-based technique for research studies on scan accuracy of implants, given its higher reliability. The accuracy of measured deviations may increase if the number of planes are increased, which can facilitate point generation at different surfaces of the scan body.

Intensifying the Absorption of CO2 in Water Using a Static Mixer. Part I: Effect of Measurement Technique

This study investigates the use of a novel static mixer to intensify CO2 absorption in water without chemical reactions. To assess the efficiency of this tubular reactor, the temporal variation of ...

Comparison of Transient-Evoked Otoacoustic Emission Waveforms and Latencies Between Nonlinear Measurement Techniques

The nonlinear differential technique is commonly used to remove stimulus artifact when measuring transient-evoked otoacoustic emissions (TEOAE). However, to ensure removal of stimulus artifact, the initial 2.5-ms of the sound pressure recording must be discarded. Discarding this portion of the response precludes measurement of TEOAE energy above approximately 5 kHz and may limit measurement of shorter-latency TEOAE components below 5 kHz. The contribution from short-latency components influences the overall latency of the emission, including its dependence on frequency and stimulus level. The double source, double-evoked technique provides an alternative means to eliminate stimulus energy from the TEOAE and permits retention of the entire response. This study describes the effect of measurement technique on TEOAE waveforms and latencies. TEOAEs were measured in 26 normal hearing subjects using the nonlinear differential and double source, double-evoked techniques. The nonlinear differential technique limited measurement of short-latency TEOAE components at frequencies as low as ~3 kHz. Loss of these components biased TEOAE latencies to later moments in time and reduced the dependence of latency on stimulus level and frequency. In studies investigating TEOAE latency, the double source, double-evoked technique is recommended as it permits measurement of the both long- and short-latency components of the TEOAE.

ISUOG Practice Guidelines: use of Doppler ultrasonography in obstetrics

<scp>ISUOG</scp> Practice Guidelines: use of Doppler ultrasonography in obstetrics

Effect of Measurement Technique on PEMFC Performance

not Available.

Measuring the corrosion rate of steel in concrete – effect of measurement technique, polarisation time and current

AbstractBoth on‐site investigations and laboratory studies have shown that different corrosion rates are obtained when different commercially available corrosion rate instruments are used. The different electrochemical techniques and the measurement parameters used, i.e. polarisation current and time, are in some studies considered the main reasons for the variations. This paper presents an experimental study on the quantitative effect of polarisation time and current on the measured polarisation resistance – and thus the corrosion current density – of passively and actively corroding steel. Two electrochemical techniques often used in instruments for on‐site corrosion rate measurements are investigated. On passively corroding reinforcement the measured polarisation resistance was for both techniques found to be highly affected by the polarisation time and current and no plateaus at either short or long polarisation times, or low or high polarisation currents were identified. On actively corroding reinforcement a large effect of the polarisation time was also found, but only a minor effect of the polarisation current. The effect of the polarisation time was, however, practically independent of the corrosion rate for actively corroding steel. For both techniques guidelines for polarisation times and currents are given for (on‐site) non‐destructive corrosion rate measurements on reinforcement steel in concrete.

Middle Cerebral Artery Median Peak Systolic Velocity Validation: Effect of Measurement Technique

We sought to validate center-specific published medians and estimate the effects of sonologist and Doppler measurement techniques on middle cerebral artery (MCA) peak systolic velocity (PSV) values. We studied 154 gravidas with normal singletons who underwent MCA PSV measurement at 18 to 35 weeks' gestation by one of three experienced sonologists. Pregnancies complicated by a known fetal anomaly (structural or aneuploidy), amniotic fluid volume disturbance, intrauterine growth restriction, multiple gestation, or isoimmunization were excluded. MCA PSV was measured using both manual caliper and auto-trace techniques. Regression models of log-transformed PSV values and gestational age were developed. Although auto-trace medians were significantly lower than those obtained with manual calipers ( P < 0.0001), they more closely approximated published medians used in clinical practice. Minimal intersonologist differences (maximum mean difference <3 cm/s) were statistically significant ( P < 0.01). Compared with manual caliper, auto-trace measurement yielded significantly lower medians. However, center-specific medians obtained by our sonologists using auto-trace more closely approximated published standards. Estimated interobserver variability suggested that different sonologists may utilize the same median values. We suggest that centers that utilize Doppler velocimetry for the prediction of fetal anemia examine their measurement protocol and consider formal confirmation of their own center-specific median values.

Paracingulate asymmetry in anterior and midcingulate cortex: sex differences and the effect of measurement technique

Many structural brain asymmetries accompany left hemisphere language dominance. For example, the cingulate sulcus is larger in the medial cortex of the right hemisphere, while the more dorsal paracingulate sulcus is larger on the left. The functional significance of these asymmetries is unknown because fMRI studies rarely attempt to localize activation to specific sulci, possibly due to difficulties in consistent sulcal identification. In medial cortex, for example, there are many regions of partial sulcal overlap where MRI images do not provide sufficient information to unambiguously distinguish a paracingulate sulcus from a displaced anterior cingulate segment. As large samples of postmortem material are rarely available for cytoarchitectural studies of sulcal variation, we have investigated the effect of variation in boundary and sulcal definition on paracingulate asymmetry in the MRI scans of 200 healthy adults (100 men, 100 women). Although women displayed a reliable asymmetry in the size of the paracingulate sulcus, regardless of boundary definition or technique, asymmetry was greatest when (1) the measurement was limited to the midcingulate region between the genu and the anterior commissure; and (2) the more dorsal of two overlapping sulci was always classified as a paracingulate sulcus (rather than as a displaced cingulate segment). The fact that paracingulate asymmetry is maximal in the midcingulate region suggests that this region may play a particular role in hemispheric specialization for language. Future work should investigate the structural and functional correlates of sulcal variation in this region.

The Oxford Brookes basal metabolic rate database – a reanalysis

To produce prediction equations for basal metabolic rate (BMR) derived from weight and height covering the age range from birth to old age. Cross-sectional data on BMR, sex, age, weight, height, ethnicity and measurement technique from the Oxford Brookes BMR database. Worldwide. Data for 13,910 men, women and children from 174 papers published between 1914 and 2001. Absolute and proportional regression models were developed for each sex, showing a steep rise in predicted BMR with age until 15 years, more pronounced in males than females, then a gradual fall through adulthood. Predicted BMR increased by 6% and 1.4%, respectively, per standard deviation increase in weight and height. Predicted BMR in Caucasians was 4% higher than in non-Caucasians, though the effect size was sensitive to the inclusion or exclusion of data from certain influential publications. The effect of measurement technique on BMR, closed-circuit versus open-circuit, was small, near 1%. It is possible to develop prediction equations that avoid splitting the data into arbitrary age groups. Heterogeneity between publications is greater than might be expected by chance, probably due to undocumented differences in technique.

Effects of measurement techniques on the experimental characterization of crack tip opening angle-Δa resistance curves

One of the most promising approaches to characterizing the stable tearing process for lower constraint configurations in metallic materials has been indicated to be the crack tip opening angle (CTOA) criterion. In this paper we examine the effect of measurement distance selection and the impact of measurement procedures/analysis on the experimental CTOA-Δa resistance curve behavior of a Ti-6Al-4V and an Al5083 alloy. A new, systematic procedure for carrying out the experimental, surface CTOA measurement process has been used, which has uncovered artifacts of measurement distance selection that have not been presented prior to this study. By studying the CTOA-Δa behavior using a rigidly defined and consistent method, it is apparent that the measurement distance behind the crack tip at which angles are measured has a direct impact on the shape of the early transitional behavior of the CTOA-Δa behavior as well as the critical, experimental CTOA values produced.

Effects of Measurement Techniques on the Experimental Characterization of Crack Tip Opening Angle- a Resistance Curves

Effects of Measurement Techniques on the Experimental Characterization of Crack Tip Opening Angle- a Resistance Curves

The interobserver reliability of ovarian volume measurement is improved with three-dimensional ultrasound, but dependent upon technique

The effect of measurement technique on the interobserver reliability of ovarian volume calculation from three-dimensional (3-D) ultrasound (US) data was investigated. Ovarian volume was calculated in 20 patients by two observers using both the “prolate ellipsoid formula” and a new 3-D rotational technique (VOCAL). There was a significant difference between observers in mean ovarian volume calculated by the prolate ellipsoid formula (31.54 mL vs. 26.54 mL: p < 0.05), which proved to be a significantly less reliable technique than 3-D rotational volume calculation with VOCAL. Image quality was significantly better ( p < 0.001) and measurements were significantly more reliable ( p < 0.05) in the B-plane than in the C- plane of the multiplanar display. Rotational measurement of ovarian volume from 3-D US data is significantly more reliable between observers than volume estimation from 2-D parameters using the prolate ellipsoid formula, but is dependent upon image quality, which is significantly better in the B-plane than in the C-plane. (E-mail: nick.fenning@nottingham.ac.uk)

The characteristics of near prism induced fixation disparity curve in Hong Kong Chinese.

The characteristics of prism induced fixation disparity curve at near were studied in 56 asymptomatic young adult Hong Kong Chinese (average age 21 years). The percentage distribution of types of fixation disparity curves was found to be similar to some previous studies, with a higher prevalence of Type I curve (64.3%), followed by Type II (28.6%) and Type III (7.1%) curves. No Type IV curve was revealed from the sample. Two modified measurement approaches were applied to study the effect of measurement techniques on the parameters of fixation disparity curve obtained. A thorough description of the techniques was given. Although a significant difference in the x- and y-intercepts was obtained between different methods, the curve type and slope were not affected. The average y-intercepts (fixation disparity) were 2.72 min of arc and 3.54 min of arc from two methods respectively. Forty-one subjects had x-intercept (associated phoria) found from the curve. The average values were 2.42 delta base-out and 3.54 delta base-out from two methods respectively.

Maximum axial root growth pressure in pea seedlings: effects of measurement techniques and cultivars

Values of the maximum axial growth pressure (σmax) of seedling pea (Pisum sativum L.) roots reported in the literature, obtained using different apparatuses and cultivars, range from 0.3 MPa to 1.3 MPa. To investigate possible reasons for this large range, we studied the effect of apparatus and cultivar on measurements of σmax in peas. We describe four types of apparatus which can be used to measure axial root growth force and hence σmax, and used them to measure σmax in seedling pea roots using cultivar Meteor. Two of these apparatuses were also used to compare σmax for three pea cultivars (Helka, Meteor and Greenfeast). Both cultivar and apparatus significantly affected σmax , but there were greater differences between apparatuses than between the three cultivars. Estimating root cross-sectional area from the diameter of cross-sections, rather than from in situ measurements (i.e. measurements made with the root still in place in the apparatus) may explain these differences.

MEASUREMENT OF HEAT CAPACITY FOR BORAGE SEEDS BY DIFFERENTIAL SCANNING CALORIMETRY

Specific heat capacity of borage seeds was determined by differential scanning calorimetry (DSC) in the temperature range of 5 to 80C and moisture content range of 0.47 to 30.31% wet basis. The specific heat ranged from 0.57 to 2.48 kJ/kgK. A multiple regression model with interaction terms correlated well the specific heat to temperature (T) and and moisture content (M). It was found that the interaction terms T*M and T*M 2 were significant (α=0.01) and thus were included in the model, and the term M*T 2 was insignificant. Effect of measurement techniques with DSC were also investigated in this study to ensure that true specific heat values were obtained. Seal condition of the sample holders during DSC measurement had considerable effect on the specific heat of borage seeds. The difference between the specific heat of sealed and unsealed samples increased as seed moisture content increased, especially at higher temperatures. For the measurement of the specific heat of borage seeds by DSC in the above-mentioned temperature and moisture content ranges, an average of 5.75% deviation was found between the measurement with and without blank compensation.