Edible Gels Research Articles

Factors Influencing Elderly Consumers' Preferences for Edible Gels: Insights from Slovakia.

As dietary needs shift with the growing and aging population, there is a demand for food products that meet nutritional, safety, and tribological requirements while being cost-effective. Seniors must be given significant consideration in new product development. This study examines consumer preferences for arabinogalactan (AG) and beta-glucan (BG) hydrogels with vanilla and coffee-biscuit flavors, using consumer tests (N = 80) and an online survey (N = 852). It focuses on the gels' physical properties, such as texture and viscosity, and their impact on sensory perception. The use of two different gel-forming polysaccharides, each with a unique sensory profile, was observed to affect the sensory properties of the resulting gels and subsequently influence product acceptance. This study analyzed preferences across three age groups: young (18-39 years), middle-aged (40-59 years), and older adults (60+ years). The results showed that seniors preferred AG-based gels. Significant attributes such as the intensity of flavor and bitter taste influenced the overall liking of the gels. Texture also notably impacted preferences. The survey findings revealed statistically significant (p < 0.05) differences in preferences between older adults and younger age groups. Tailoring product development and marketing strategies based on age and sensory preferences could enhance consumer acceptance of edible gels.

Impact of Antioxidant-Enriched Edible Gel Coatings and Bio-Based Packaging on Cherry Tomato Preservation.

This research investigates the effects of using edible gel coatings and bio-based packaging materials on extending the shelf life of cherry tomatoes. Two edible gel coatings (guar gum and guar gum +5% of a lemon (Citrus limon (L.) Osbeck pomace extract obtained in the research laboratory) were applied on cherry tomatoes, then they were packaged in bio-based materials (cellulose tray + PLA lid). Guar gum, glycerol, sorbitol, extra virgin olive oil, and tween 20 were used in coating formulation. Uncoated tomatoes packed in bio-based materials and conventional plastic (PET trays + lid) were tested as a control. Samples were stored for 45 days at 20 °C and their quality parameters were evaluated. Coated tomatoes maintained firmness and weight, and the enriched coated samples showed a significant increase in phenol content, derived from the antioxidant extract. Samples packed in PET showed a sensory unacceptability (<4.5) after 45 days correlated with a greater decline in firmness (from 10.51 to 5.96 N) and weight loss (from 7.06 to 11.02%). Therefore, edible gel coating and bio-based packaging proved to be effective in maintaining the overall quality of cherry tomatoes for 45 days, offering a promising approach to reduce plastic polymer use and food waste.

3D Printing Properties of Heat-Induced Sodium Alginate-Whey Protein Isolate Edible Gel.

The objective of this study was to develop a food 3D printing gel and investigate the effects of whey protein isolate (WPI), sodium alginate (SA), and water-bath heating time on the 3D printing performance of the gel. Initially, the influence of these three factors on the rheological properties of the gel was examined to determine the suitable formulation ranges for 3D printing. Subsequently, the formulation was optimized using response surface methodology, and texture analysis, scanning electron microscopy (SEM), and Fourier-transform infrared (FTIR) spectroscopy were conducted. The rheological results indicated that gels with WPI concentrations of 6-7 g, SA concentrations of 0.8-1.2 g, and water-bath heating times of 10-12 min exhibited lower yield stress and better self-supporting properties. The optimized formulation, determined through response surface methodology, consisted of 1.2 g SA, 6.5 g WPI, and a heating time of 12 min. This optimized formulation demonstrated enhanced extrusion capability and superior printing performance. SEM analysis revealed that the optimized gel possessed good mechanical strength, and FTIR spectroscopy confirmed the successful composite formation of the gel. Overall, the results indicate that the optimized gel formulation can be successfully printed and exhibits excellent 3D printing performance.

Alginate Cryogels as a Template for the Preparation of Edible Oleogels.

A high consumption of solid fats is linked to increased inflammation and a risk of cardiovascular diseases. Hence, in recent years, there has been increasing interest in the development of oleogels as a fat substitute in food products. Oleogels are edible gels that contain a large amount of liquid oils entrapped in a 3D network and that can potentially be applied to spreads, bakery goods, meat, and dairy products in order to lower their saturated fat content while maintaining a desirable food texture and mouthfeel. In this work, alginate cryogels were studied as templates for three different edible oils in the process of oleogel formation. Two different freezing regimes to obtain cryogels were employed in order to evaluate better the textural and morphological capabilities of cryogels to adsorb and retain edible oils. It was shown that rapid freezing in liquid nitrogen produces alginate cryogels with a lower density, higher porosity, and a greater ability to adsorb the tested oils. The highest uptake and holding oil capacity was achieved for olive oil, which reached a value of 792% and 82%, respectively. The best chewiness was found for an oleogel containing olive oil, whereas oleogels with the other two tested oils showed better springiness. Hence, the results presented in this work demonstrated that alginate-based cryogels can be effectively used as templates for oleogels and potentially find applications in the food industry.

Bioactive Edible Gel Films Based on Wheat Flour and Glucose for Food Packaging Applications.

In order to prepare bioactive edible gel films with enhanced properties, the feasibility of using wheat flour as a raw material with glucose added at several concentrations was studied in this investigation. Films were prepared with glucose concentrations of 0.5, 0.7 and 1 g/g of flour and characterized for their physicochemical properties, including water content, solubility, degree of swelling, chemical structure by FT-IR (ATR) spectroscopy, morphology by SEM microscopy, thermal properties by DSC, gas and water vapor permeability and antioxidant activity. Biodegradation studies were also carried out in soil for 27 days and evaluated by weight loss measurements. It was found that the gel film with the higher glucose concentration exhibits a homogeneous and continuous structure with no cracks and no fragility, accompanied by an increased thickness and solubility and a decreased degree of swelling compared to those with lower concentrations. The chemical structure of all films was verified. Moreover, the increase in glucose content leads to better gas barrier properties with lower oxygen, CO2 and water vapor transmission rates and increased water vapor permeability. A slightly elevated melting temperature was observed in the films with higher glucose content. Higher antioxidant activity was also associated with higher percentage of glucose. Finally, the biodegradation of the films ranged from 13 to nearly 70%. Therefore, it can be concluded that the addition of glucose to wheat flour in concentration up to 1 g/g could result in edible gel films with excellent properties to be used in food packaging applications.

Polysaccharide from Clitocybe squamulosa: Gel-forming properties and its compound effect with food thickener

To study the gel-forming properties of polysaccharide from the fruiting body of Clitocybe squamulosa (CSFP) and its degradation product (UH-CSFP), the changes in steady-state and dynamic rheological properties of CSFP and UH-CSFP under different conditions (polysaccharide mass fraction, temperature, pH, and salt ion concentration) were studied. Polysaccharides with good gel-forming properties were selected and mixed with common edible thickeners (gelatin, guar gum, and locust bean gum), after which the properties of the composite gel were assessed. The steady-state rheological results showed that CSFP and UH-CSFP were pseudoplastic fluids, their apparent viscosity decreased with increasing temperature, the viscosity was greatest when the pH was 7. The addition of Na+ and Ca2+ could increase the viscosity, and the viscosity of UH-CSFP was lower than that of CSFP at the same mass fraction. The results of dynamic rheology indicated that G´ and G´´ of CSFP and UH-CSFP increased with increasing mass fraction, pH, and ion concentration (0.01 M to 1 M), and G´´ was always smaller than G´ indicating weak gel behavior. The thixotropy-related experimental results showed that the thixotropy ring area of CSFP and UH-CSFP increased with increasing mass fraction, the ring area of CSFP was larger than that of UH-CSFP, and the gel strength of CSFP was greater than that of UH-CSFP. The results of CSFP and three types of edible gels showed that the composite gels were pseudoplastic fluids, and their apparent viscosity was ranked (in descending order) as follows: guar bean gum, locust bean gum, and gelatin. The addition of CSFP improved the gel-forming properties of guar gum but did not significantly improve the gel properties of locust bean gum and gelatin. This study provides a theoretical basis for the selection of processing methods and the application of polysaccharides.

An Edible Supercapacitor Based on Zwitterionic Soy Sauce‐Based Gel Electrolyte

AbstractWith rapid technological developments, the use and reliance on small and miniaturized electronics have increased significantly. Prevalent power sources used in wearable and implantable devices are based on potentially toxic materials. This creates massive environmental problems and generates waste that requires novel and sustainable solutions in the Internet of Things era. Alongside newly developed biodegradable and implantable devices, edible and ingestible electronic devices have emerged to create a niche and sustainable solution. To realize these devices, energy sources must also be edible and ingestible. Here, zwitterionic and edible gel electrolytes are produced using hydroxyethyl cellulose and commercial soy sauce (shoyu) for superior ionic conductivity, providing a favorable environment for L929 proliferation. These edible gels are combined with carbon electrodes to fabricate edible supercapacitor devices, resulting in an ideal double‐layer capacitance. These gels have been discovered to operate at sub‐zero temperatures and possess anti‐drying properties. Introducing an edible soy sauce‐based gel with impressive ionic performance provides a promising alternative to conventional energy storage devices, enabling the advancement of cutting‐edge ingestible healthcare devices and environmentally friendly electronics.

Analysis of gelation properties of peach-κ-carrageenan gels: Effect of erythritol

Based on the amounts of dietary fiber, we selected peach pulp was as the main matrix to develop the peach-κ-carrageenan edible gels (PC-KC), in which erythritol was used as the cosolvent. Effects of erythritol concentrations (0, 1, 3, 5, 7, 9%, w/w) on the characteristics of PC-KC gels were studied. TPA results showed that erythritol (0%∼5%) improved the textural properties. The critical level of erythritol was found to be 5% (w/w). Additionally, erythritol (especially, with the addition of 5%) enhanced the WHC of PC-KC gels accompanied with the lowest syneresis (7.72%), illustrating the strong water capture capacity, which was confirmed by the changes in water mobility characterized through LF-NMR. SEM showed a dense network with more junction zones after the erythritol addition. Besides that, intensified and variation peaks in FT-IR spectra speculate the synergistic interactions. XRD showed erythritol improved the crystallinity of PC-KC gels. Overall, the quality of the PC-KC gels could be improved by erythritol with the appropriate concentration, which might provide the beneficial information for the formation mechanism of edible gel, in which fruit pulp was used as the main matrix and erythritol as the cosolvent.

Edible Gels with Cranberry Extract: Evaluation of Anthocyanin Release Kinetics.

The bioactive compounds found in cranberry fruit are natural antioxidants, and their consumption reduces the risk of diabetes, cardiovascular disease, cancers, and urinary tract infections. Oral gels with cranberry fruit extract are a promising product that can ensure accurate dosage and release of the active compounds and are suitable for people with dysphagia. The aim of this study was to determine the effect of polymeric materials on the dissolution kinetics of cranberry fruit anthocyanins from gel formulations. Gel formulations were prepared using freeze-dried cranberry fruit extract with different gelling excipients: chitosan (G1-G3), sodium carboxymethylcellulose (G4-G6), and sodium carboxymethylcellulose combined with carbomers (G7-G9). The dissolution test showed that the release of anthocyanins from gel formulations G1-G6 and G9 was most intense within the first 10 min, with little change in the anthocyanin content of the acceptor medium afterwards. For the formulations based on carboxymethyl cellulose and carbomers G7 and G8, the amount of anthocyanins released into the acceptor medium gradually increased, which prolonged the release time of the active compounds. The test for the release of anthocyanins from the semi-solid systems through a hydrophilic membrane revealed that within the first hour, the total amount of anthocyanins released from the modeled gel formulations (G1-G9) was within the range of 6.02%-13.50%. The 1% chitosan (G1) gel formulation released the fastest and highest amount of anthocyanins (70% within 6 h). The other formulations showed a slower release of anthocyanins, and after 6 h, the amount of anthocyanins released from formulations G2-G9 was <57%.

Spontaneous gelation behaviors and mechanism of Ficus awkeotsang Makino pectin

Ficus awkeotsang Makino (jelly fig) can produce edible gels by rubbing its seeds in water at room temperature in which pectin is considered as the main gelling component. However, the spontaneous gelation mechanism of Ficus awkeotsang Makino (jelly fig) pectin (JFSP) is still unclear. This study aimed to reveal the structure, physicochemical properties, and spontaneous gelation behaviors and mechanism of JFSP. JFSP was first obtained by water extraction and alcohol precipitation method, with a pectin yield of 13.25 ± 0.42 % (w/w), weight-average molar mass (Mw) of 111.26 kDa, and methoxylation degree (DM) of 26.8 %. Analysis of monosaccharide compositions showed that JFSP was composed of 87.8 % galactose acid, indicating a high percentage of galacturonic acid blocks. Measurement on the gelling capacity suggested that JFSP gels can be easily formed by simply dispersing the pectin in water at room temperature without adding any co-solutes or metal ions. Gelation force analysis indicated that hydrogen bonding, hydrophobic interactions, and electrostatic interactions were the main factors contributing to gel formation. At 1.0 % (w/v) of pectin concentration, JFSP gels exhibited relatively high gel hardness (72.75 ± 1.15 g) and good thermal and freeze-thawing stability. Overall, these findings highlight the potential application of JFSP as a promising commercial pectin resource.

Probing emulsion-gel transition in aqueous two-phase systems stabilized by charged nanoparticles: A simple pathway to fabricate water-in-water emulsion-filled gels

Nanoparticle-stabilized water-in-water (w/w) emulsions, an example of aqueous two-phase systems (ATPS), can produce low-fat food colloids, edible gels, bio-polymer-based bijels, scaffolds for tissue-engineering, and porous materials. This w/w emulsion is made from two thermodynamically incompatible aqueous-polymer solutions, such as polyethylene oxide (PEO) and dextran. Changing the molecular weight of PEO in one aqueous phase stabilizes w/w emulsion. The state diagram we generated using electron and light microscopy provides a novel approach to producing stable emulsion-filled gels and emulsion droplets. The visual examination, brightfield, and fluorescent microscopy studies highlight the role of molecular weight and storage duration. The production of an emulsion-filled gel is ascribed to the “active-filler-particles” arrangement, typically seen when the affinity between droplets stabilized by particles and polymer is substantial. In contrast, we expect the “inactive-filler-particles” arrangement for the samples that undergo phase inversion. The temporal evolution of shear-induced structures recorded using a rheometer demonstrates that these emulsion-filled gels’ viscoelastic properties correspond directly with time, molecular weight, and polymer composition. The emulsion-filled gels generated displayed 90-day storage stability. Our work would help us understand the complex dynamics of w/w emulsion-based formulations that need suitable size, shape, appearance, and shelf life management.

Farm waste-eggshell nanoparticles constitute gel for safe navigation of probiotic across the stomach

Gut microbiota plays an important role in gastrointestinal health, whose colonization through oral application as probiotic faces a major challenge due to harsh acidic conditions in the stomach. Hence, an edible gel constituted of agricultural waste like eggshell particles and pectin is developed to carry the probiotic safely. The eggshell shares the surface calcium ions for gelation, core particle as gel strength reinforcement agent and calcite to neutralize the gastric pH. This robust carrier shows 60% more viability compared to the control. Interestingly, the mechanism of this compact gel formation has been found to involve the structure-directing and functional eggshell proteins. Significant improvement in the polyphenol metabolism has also been observed by this formulation. Scheme: Schematic shows Lactobacillus plantarum navigating across the stomach safely in the eggshell nanoparticles + pectin prebiotic gel.

Novel gels and films to mask boar taint in entire male pork

Boar taint masking strategies were developed using hydrocolloids and spices to produce edible gels and films. Carrageenan (G1) and agar-agar (G2) were used for the gels and gelatin (F1) and alginate+maltodextrin (F2) for the films. The strategies were applied to both castrated (control) and entire male pork with high levels of androstenone and skatole. The samples were evaluated sensorially by a trained tasting panel through quantitative descriptive analysis (QDA).Lower hardness and chewiness of entire male pork, with high levels of boar taint compounds object of study, were found with the carrageenan gel, due to the better carrageenan gel adherence to the loin. The films showed that the gelatin strategy tended to have a certain “sweet” taste, and a higher overall masking than the alginate+maltodextrin film. In conclusion, a trained tasting panel found that gelatin film masked boar taint the most, followed by the alginate+maltodextrin film and the carrageenan-based gel.

Choice Experiment Assessment of Consumer Preferences for Yogurt Products Attributes: Evidence from Taiwan.

Previous studies on consumer yogurt preferences have mainly focused on added sugar, nutrient content, and health claims, leaving several knowledge gaps that should be filled through in-depth research. In this study, a more complete multi-attribute preference model was developed using the number of probiotic types, type of milk source, presence of edible gels (GEL), and usage of health food labels as the main yogurt attributes. A choice experiment (CE) was then conducted to investigate the relationship between multiple attribute preferences and willingness-to-pay (WTP). A total of 435 valid questionnaires were collected by the convenience sampling method. The results show that (1) respondents highly value the health food label (HEA), followed by the number of probiotic types (PRO); (2) the highest WTP in the conditional logit (CL) model was New Taiwan Dollar (NTD) (USD 10.5 for HEA, and the lowest was NTD 1.0 for 100% milk powder (MLK2); (3) in the random-parameter logit (RPL) model, the highest WTP was NTD 14.6 for HEA, and the lowest was NTD 2.8 for GEL; (4) the most preferred attribute combination of yogurt was “8 or more probiotic types”, “a blend of raw milk and milk powder”, “the absence of edible gels”, “the presence of a health food label”, and “a price premium of NTD 6–10”; (5) married respondents with children were more willing to pay extra for yogurt products with a higher number of probiotic types and a health food label. The results may help the food industry understand and pay attention to consumer needs, which will, in turn, provide a reference for future product development and marketing strategies.

Polysaccharide-Based Edible Gels as Functional Ingredients: Characterization, Applicability, and Human Health Benefits.

Nowadays, edible materials such as polysaccharides have gained attention due to their valuable attributes, especially gelling property. Polysaccharide-based edible gels (PEGs) can be classified as (i) hydrogels, (ii) oleogels and bigels, (iii) and aerogels, cryogels and xerogels, respectively. PEGs have different characteristics and benefits depending on the functional groups of polysaccharide chains (e.g., carboxylic, sulphonic, amino, methoxyl) and on the preparation method. However, PEGs are found in the incipient phase of research and most studies are related to their preparation, characterization, sustainable raw materials, and applicability. Furthermore, all these aspects are treated separately for each class of PEG, without offering an overview of those already obtained PEGs. The novelty of this manuscript is to offer an overview of the classification, definition, formulation, and characterization of PEGs. Furthermore, the applicability of PEGs in the food sector (e.g., food packaging, improving food profile agent, delivery systems) and in the medical/pharmaceutical sector is also critically discussed. Ultimately, the correlation between PEG consumption and polysaccharides properties for human health (e.g., intestinal microecology, “bridge effect” in obesity, gut microbiota) are critically discussed for the first time. Bigels may be valuable for use as ink for 3D food printing in personalized diets for human health treatment. PEGs have a significant role in developing smart materials as both ingredients and coatings and methods, and techniques for exploring PEGs are essential. PEGs as carriers of bioactive compounds have a demonstrated effect on obesity. All the physical, chemical, and biological interactions among PEGs and other organic and inorganic structures should be investigated.

The synthesis and evaluation of thiolated alginate as the barrier to block nutrient absorption on small intestine for body-weight control.

Obesity is the most common health concern all over the world. However, till now, there is no promising way to manage obesity or body-weight control. The aim of the study is to develop an edible gel as a health supplement that temporarily attaches to the mucus of the intestines, forming an absorption barrier to block the nutrients. We modify the alginate with the thiol group as thiolated alginate (TA) that may stay on the mucosa layer for a much longer time to reduce nutrient absorption. In this study, the TA is synthesized successfully and proved a good mucosal adhesion to serve as a barrier for nutrient absorption both in vitro and in vivo. The results of in vivo imaging system (IVIS) show that the synthesized TA can be exiled from the gastrointestinal tract within 24 h. The animal study shows that the TA by daily oral administration can effectively reduce body weight and fat deposition. The biosafety is evaluated in vitro at the cellular level, based on ISO-10993, and further checked by animal study. We do believe that the TA could have a greater potential to be developed into a safe health supplement to manage obesity and for body-weight control.

Polyvinyl alcohol-based films plasticized with an edible sweetened gel enriched with antioxidant carminic acid

Edible sweetened gels are commonly used in bakery products. The aim of this work is to show that certain edible gels can be used as functional modifiers for biodegradable polymers. These gels are rich in glucose and sugars, containing much less water. To date, sugars (glucose, maltose, sucrose, and d -allulose), have also been used as natural plasticizers for polysaccharides to form edible films. In this work, we prepared an edible gel based on glucose, sugar and carrageenan as a gelling agent and tested the gel's plasticizing effect on polyvinyl alcohol, PVA. Carminic acid, a natural pigment and a powerful antioxidant with antiradical activity, was added to the gels. The optimum plasticizing effect was obtained from 1:1 gel: polymer mixing ratio with 28.6 wt% total sugars. Carminic acid also assisted with low oxygen permeation (OP, 3.4 cm 3 μm/m 2 .day.atm) values due to its oxidative radical scavenging chemistry. In aqueous and ethanoic solutions, the films released carminic acid in a sustained manner and within 36 h, strong inhibition was measured against standard stable free-radical molecules known as DPPH and ABTS +• . Finally, the films demonstrated effective color change upon exposure to ammonia vapors that can be exploited towards food spoilage detection. These materials could be effectively used as freestanding, protective antioxidant barrier films or can be laminated with other hydrophobic thermoplastics for general packaging applications. • A sugar based carrageenan gel was used as plasticizer for PVA. • The gel contained carminic acid, which acted as a strong antioxidant. • The plasticized films had very low oxygen permeation values. • The films changed color upon exposure to ammonia vapors. • The plasticized films could be used for multilayer packaging.

Preparation and characterization of Goji berry edible gel from its boiling water extract

Preparation and characterization of Goji berry edible gel from its boiling water extract

Development of Novel Rice Bran Wax/Gelatin-Based Biphasic Edible Gels and Characterization of their Microstructural, Thermal, and Mechanical Properties

Development of Novel Rice Bran Wax/Gelatin-Based Biphasic Edible Gels and Characterization of their Microstructural, Thermal, and Mechanical Properties

Development of edible gels and films as potential strategy to revalorize entire male pork

Spiced edible gels and films were produced as part of a future technological strategy to improve the quality of pork from entire male by contributing to a decrease in boar taint and improving the texture of the meat. Each formulation, two types of hydrocolloids and two spice mixtures, were tested for their high masking power (mixtures 1 and 2). The thermoreversible hydrocolloids carrageenans (g-C) and agar-agar (g-A) were used in the production of the gels, and maltodextrin + sodium alginate (f-MA) and gelatin (f-G) for the films. The results showed that the films and gels edible had good physical-chemical and mechanical characteristics, providing sufficient stability to act as a vehicle to incorporate spices and condiments into entire male pork, being mixture 2 provided the highest values. While the use of hydrocolloids in the films improved the texture of the meat.