Eco-friendly Poly Research Articles

Eco-friendly poly (ε-caprolactone) based Microfiltration polymeric membranes - influence of dope composition on morphology and performance concerning oil-water separation

Eco-friendly poly (ε-caprolactone) based Microfiltration polymeric membranes - influence of dope composition on morphology and performance concerning oil-water separation

Hierarchically Nano-Decorated Poly(lactic acid) Nanofibers for Humidity-Resistant Respiratory Healthcare and High-Accuracy Disease Diagnosis.

The application of biodegradable and eco-friendly poly(lactic acid) (PLA) nanofibrous membranes (NFMs) toward respiratory healthcare has long been thwarted by the poor electroactivity and low surface activity of PLA. Herein, we unravel a microwave-assisted route to fabricate rod-like ZnO nanodielectrics, which were decorated with dopamine (ZnO@PDA) and anchored at the PLA nanofibers via an electrospinning-electrospray approach. The PLA/ZnO@PDA NFMs featured a substantially elevated specific surface area (up to 20.7 m2/g), increased dielectric constant (nearly 1.8) and a surface potential as high as 9.5 kV, resulting in superior air filtering performance (99.45% for PM0.3, 94.1 Pa, 32 L/min) compared with the pure PLA counterpart (90.04%, 169.0 Pa, 32 L/min). The notably increased electroactivity endowed the PLA/ZnO@PDA NFMs with significant improvements in triboelectric properties (output voltage of 11.5 V at 10 N, 0.5 Hz), laying down the cornerstone for self-powered monitoring of personal respiration. More importantly, a deep learning-assisted diagnostic system was developed based on respiration-driven signal patterns, enabling intelligent and real-time disease diagnosis with 100% accuracy for the protective membranes. The proposed hierarchical nanodecoration strategy opens up new possibilities for engendering eco-friendly nanofibers with an exceptional combination of efficient respiratory healthcare and intelligent diagnosis.

Eco-friendly, highly interpenetrated and slightly swollen pHEMA hydrogel foam for durable underwater superoleophobicity and emulsion separation

Despite the emergence of hydrogels as ideal candidates for preparing the superhydrophilic materials for emulsion separation, their structural stability and swelling still hinder their long-term use, mainly due to structure defects after swelling. Herein, differing from the common modification, the eco-friendly poly 2-hydroxyethyl methacrylate (pHEMA) hydrogel foam was designed and synthesized via a one-step strategy by using the high internal phase emulsion (HIPE) template method, which endowed it with a highly interpenetrated porous structure. Unlike the normal swellable hydrogels such as poly(N-isoproplyacrylamide) (PNIPAM) hydrogel, or modified hydrogel coatings, the pHEMA hydrogel foam displayed stable structure and underwater superoleophobicity after 20 d of immersion in water. The pHEMA hydrogel foam could separate different kinds of highly surfactant-stabilized oil-in-water (O/W) emulsions with a high separation efficiency of 99.3% for liquid paraffin emulsion obtained solely under gravity-driven. Additionally, it exhibited excellent antifouling performance and long-term acid/alkali tolerance over 100 h without decrease in emulsion separation efficiency (98.0%, oil/water ratio of 99:1) and permeation flux (over 2000 L·m−2·h−1) attributed to its stable bulky structure. Moreover, the pHEMA hydrogel foam demonstrated high cell viability of 96.87% and 95.96% after culturing the 3T3 clone A31 cells in the pHEMA hydrogel foam for 24 h and 48 h, respectively, indicating good biocompatibility. Hence, our work provides a new design to develop an eco-friendly bulk hydrogel foam that achieves stable structure and performance for emulsion separation.

Application of active and environment-friendly poly (3-hydroxybutyrate)/grapeseed oil/MgO nanocomposite packaging for prolonging the shelf-life of cherry tomatoes (Solanum lycopersicum L. var.cerasiforme)

Active packaging is one of the emerging technologies for maintaining the safety and quality of fresh produce. This work assessed the effectiveness of an active and eco-friendly poly (3-hydroxybutyrate) (PHB) based film loaded with 5 wt% grapeseed oil (GS) and 0.7 wt% MgO nanoparticles (MgO NPs) prepared via sonication-assisted solution casting route for storage and handling of the cherry tomatoes. The shelf-life study of cherry tomatoes in active (PHB/5GS/0.7MgO) packaging was carried out for 23 days in ambient room conditions, and results are compared with the storage of cherry tomatoes without packaging (control), in low-density polyethylene (LDPE) packaging, and in PHB packaging. Various parameters, viz. Visual appearance, weight loss, firmness, total soluble solids (TSS), titratable acidity (TA), ripening index, pH, color, and organoleptic factors, were evaluated every 3 days for cherry tomatoes in various storage groups. The results from the shelf-life study clearly showed that the cherry tomatoes stored in PHB/5GS/0.7MgO packaging experienced better preservation of quality than those in other storage groups, with no signs of surface wrinkling, shrinkage, microbial growth, or juice leakage till day 21 of their storage. This was further evidenced by minimal weight loss (4.45 ± 0.06% on day 21), minimal change in titratable acidity (0.74 ± 0.01% on day 0–0.67 ± 0.01% on day 21), and better retention of firmness (19.89 ± 0.12 N on day 0–15.77 ± 0.37 N on day 21), pH, color, and organoleptic attributes for the cherry tomatoes stored in this packaging group. Furthermore, it was found that the migration of MgO NPs from the nanocomposite packaging to cherry tomatoes was negligible. These findings suggest that the PHB/5GS/0.7MgO nanocomposite film is a promising choice for the storage of cherry tomatoes.

Eco-friendly zinc-metal-organic framework as a nucleating agent for poly (lactic acid)

Eco-friendly poly(L-lactic acid) (PLA) can be made more versatile, and its crystallization rate is accelerated by adding Zinc-based metal-organic framework (Zn-MOF) particles. Using differential scanning calorimetry (DSC), the non-isothermal melt crystallization behavior of biodegradable PLA nucleated by 0.3 to 3 wt% of Zn-MOF was examined. The non-isothermal melt crystallization kinetics parameters were determined using a modified Avrami model and Mo approach. Zn-MOF dramatically accelerated the crystallization process, as evidenced by several non-isothermal crystallization metrics, including the crystallization half-time and crystallization rate constant. The melt crystallization temperatures of the PLA-Zn-MOF composites, with contents of 0.7 and 1 wt%, were increased by 21 °C compared to the neat PLA. Using the Friedman isoconversional kinetic method, the neat PLA and PLA-Zn-MOF composites' effective activation energy values, ∆E, were determined. The ∆E values of PLA-Zn-MOF from 0.3 to 1 wt% Zn-MOF composites were lower than that of neat PLA. Moreover, polarized optical microscopy revealed the formation of numerous small-sized PLA spherulites upon Zn-MOF addition. The results indicate that the Zn-MOF (at concentrations of 0.7 to 1.0 wt%) can be used as an efficient nucleating agent for PLA, where it increases the melt crystallization temperature, nucleation density, and crystallinity without changing the crystalline structure, while also significantly reduces the effective activation energy and the size of spherulites. Additionally, scanning electron microscopy confirms good dispersion of Zn-MOF (0.3 to 1 wt%) within the PLA matrix.

Eco-Friendly Poly (Butylene Adipate-co-Terephthalate) Coated Bi-Layered Films: An Approach to Enhance Mechanical and Barrier Properties.

In this research work, a coated paper was prepared with poly (butylene adipate-co-terephthalate) (PBAT) film to explore its use in eco-friendly food packaging. The paper was coated with PBAT film for packaging using hot pressing, a production method currently employed in the packaging industry. The coated papers were evaluated for their structural, mechanical, thermal, and barrier properties. The structural morphology and chemical analysis of the coated paper confirmed the consistent formation of PBAT bi-layered on paper surfaces. Surface coating with PBAT film increased the water resistance of the paper samples, as demonstrated by tests of barrier characteristics, including the water vapor transmission rate (WVTR), oxygen transmission rate (OTR), and water contact angle (WCA) of water drops. The transmission rate of the clean paper was 2010.40 cc m-2 per 24 h for OTR and 110.24 g m-2 per 24 h for WVTR. If the PBAT-film was coated, the value decreased to 91.79 g m-2 per 24 h and 992.86 cc m-2 per 24 h. The hydrophobic nature of PBAT, confirmed by WCA measurements, contributed to the enhanced water resistance of PBAT-coated paper. This result presents an improved PBAT-coated paper material, eliminating the need for adhesives and allowing for the fabrication of bi-layered packaging.

Robust Superhydrophobic Films Based on an Eco-Friendly Poly(l-lactic acid)/Cellulose Composite with Controllable Water Adhesion.

Poly(l-lactic acid) (PLLA) featuring desirable biodegradability and biocompatibility has been recognized as one of the promising eco-friendly biomaterials. However, low crystallization and poor mechanical and chemical performances dramatically hamper its practical application. In this work, we report that functionalized cellulose/PLLA composite superhydrophobic stereocomplex films with controllable water adhesion and protein adsorption can be fabricated by a facile approach for the first time. First, cellulose is surface-modified by means of two silanization modification methods. Then, superhydrophobic cellulose/PLLA composite films are prepared through a solvent-evaporation-induced phase separation method. The two cellulose/PLLA composite films exhibit extreme water repellency but tunable water adhesion from sticky to slippery. The protein adsorption capacity of the cellulose/PLLA composite films can also be regulated. In addition, the stereocomplexation of the composite film provides excellent mechanical properties with an elongation at break of 22.36%, which is 237.8% higher than that of a pure PLLA film, which is more suitable for biomaterials. Furthermore, good biodegradability of the PLLA composite films in nature enables the bio-based composites as alternative materials to replace conventional petroleum-based polymers. The superhydrophobic films have also been demonstrated for many applications, including slippery surfaces, liquid transportation without loss, and antifouling.

Eco-friendly photothermal hydrogel evaporator for efficient solar-driven water purification

The field of solar vapor generation has developed rapidly in recent years, but achieving the goals of a high evaporation rate, eco-friendliness and rapid preparation with low-cost raw materials is still a challenge. In this work, a type of photothermal hydrogel evaporator was prepared by blending eco-friendly poly(vinyl alcohol), agarose, Fe3+ and tannic acid (TA) together, in which the tannic acid-ferric ion (TA*Fe3+) complexes served as photothermal materials and effective gelators. The results indicate that the TA*Fe3+ complex exhibits excellent gelatinization ability and light-absorption performance, which leads to a compressive stress of 0.98 MPa at 80% strain and up to 85% light absorption ratio in the photothermal hydrogel. For interfacial evaporation, a high rate of 1.897 ± 0.11 kg·m−2·h−1 corresponding to an energy efficiency of 89.7 ± 2.73% under 1 sun irradiation is achieved. Moreover, the hydrogel evaporator exhibits high stability in a 12-hour test and a 20-cycle test without a decline in evaporation performance. The outdoor testing results show that the hydrogel evaporator can achieve an evaporation rate of > 0.70 kg/m2 and effectively purify wastewater treatment and seawater desalination.

Highly Efficient Piezocatalytic Activity of Poly(tetrafluoroethylene) for Large-Scale Organic Wastewater Purification

Piezocatalysis is an emerging and promising catalytic technique for degrading organic pollutants by harvesting mechanical energy. However, the catalytic efficiency and environment compatibility of present piezocatalysts are still unsatisfactory. Here, the superior piezocatalytic performance of eco-friendly poly(tetrafluoroethylene) (PTFE) micron powders was demonstrated by degrading several typical dyes. Methylene blue can be degraded by 99% within 20 min (k = 0.246 min–1) using fresh PTFE under ultrasonic vibration, and PTFE exhibits excellent stability and reusability. In addition, rhodamine B, acid orange 7, and methyl orange can also be degraded by 100, 98, and 99% within 60 min, respectively, demonstrating the wide adaptability of PTFE. Catalytic mechanism investigations demonstrate that •OH and •O2– play major roles in dye degradation. Furthermore, the influence of various water sources and different containers on the catalytic performances of PTFE was explored, indicating that PTFE has nice environmental suitability and that the glass container facilitates catalytic degradation. Therefore, a designed glass spiral tube was applied for large-volume wastewater purification, which can be further extended for potential applications. This work thus demonstrates that PTFE can be regarded as a promising catalyst for wastewater treatment by harvesting mechanical energy, and the proposed Z-shaped wastewater degradation device has potential applications in wastewater treatment.

Sustainable and eco-friendly poly (Lactic acid)/cellulose nanocrystal nanocomposite films for the preservation of oxygen-sensitive food

The development of enzymatic browning constitutes one of the key issues in the preservation of highly perishable fresh-cut and oxygen-sensitive fruits such as avocados. This study explored the use of a packaging solution based on PLA/cellulose nanocrystal (CNC) films produced using a solvent-free cast extrusion process with strong oxygen and UV barrier properties to reduce browning in cut avocados and to prolong shelf life. Specifically, the effects of packaging material types (neat PLA vs PLA/CNC nanocomposite) and storage conditions (temperature and time) on discoloration (browning), microbial growth, and shelf life were assessed. Enzymatic browning was visually evaluated and total discoloration (ΔE*) quantified as a function of storage time and temperature to estimate the shelf life of the avocados. Compared with neat PLA, nanocomposite packaging reduced the enzymatic browning more and resulted in additional shelf life extension of 1.3 days at 23 °C and 5.4 days at 4 °C. Both PLA-based films reduced the microbial growth. The potential of sustainable and eco-friendly nanocomposite film to prolong the shelf life of food that is oxygen sensitive is clearly demonstrated.

Eco-friendly poly(aniline boronic acid)/gum tragacanth stabilized silver nanoparticles nanocomposite for selective sensing of Hg2+

The stable and dispersed aqueous nanocomposite of poly(aniline boronic acid)/gum tragacanth stabilized silver nanoparticles (PABA/GT@AgNPs) was synthesized and applied as a colorimetric nanoprobe for Hg2+. Aniline boronic acid was used as the only reducing agent of silver nitrate and equally oxidized to PABA based on in situ chemical oxidative polymerization. In the presence of gum tragacanth (GT), hydroxyl groups of GT will bind to PABA at boronic groups to generate the PABA/GT matrix, on which AgNPs are anchored. At the optimal synthesis, absorption spectra at 285 and 421 nm correspond to π -π* transitions of PABA and plasmon resonance band of small sized AgNPs (10–15 nm). Based on the FTIR spectrum, GT is the major constituent of nanocomposite. Under optimal conditions (40 mM phosphate buffer pH 6.0, 150 mM sodium chloride, reaction time of 8 min at room temperature), the PABA/GT@AgNPs was used as a sensing of Hg2+ based on Hg2+ induced transmetalation on arylboronic acid group and redox reaction with Ag0. In the presence of Hg2+, the aggregation of PABA/GT@AgNPs can be seen by a color change from pale yellow to colorless and a blue shift from 407 nm to 370 nm. Good linear ranges in the concentrations of 0.005–1.0 μM and 1.0–40.0 μM were achieved, with a detection limit of 0.85 nM. The practicality of the detection was demonstrated on tap and lake water samples, with no effects of other interfering ions, and satisfactory recoveries of 97–101 % and precisions of 2.9–5.6 %.

Intrinsic approach of eco-friendly poly (benzoxazine-co-maleicanhydride) materials for self-healing applications

Intrinsic approach of eco-friendly poly (benzoxazine-co-maleicanhydride) materials for self-healing applications

Development of multifunctional highly-efficient bio-based fire-retardant poly(lactic acid) composites for simultaneously improving thermal, crystallization and fire safety properties

Currently, it is still a huge challenge to prepare high performance eco-friendly poly(lactic acid) (PLA) with high thermal stability, good processability, excellent crystallization behavior, good transparency and highly-efficient fire safety. In this paper, a novel bio-based nucleation agent N-(furan-2-ylmethyl)-P,P-diphenylphosphinic amide (FPPA) was prepared and used for the fabrication of fire safety PLA/FPPA composites. The chemical structure of FPPA was measured by FTIR, NMR and MS. Further, the crystallization behavior, thermal stability, fire safety and mechanical properties of PLA/FPPA composites were performed by TGA, DSC, polarization microscope, LOI, UL94, cone calorimeter, DMA and, SEM, Raman, GC–MS, and TGA-FTIR. The results showed that the multifunctional FPPA not only had a high thermal stability and was a good nucleation agent for PLA. Moreover, only loading of 3 wt% FPPA increased the LOI of PLA from 19.0 to 33.8 % with UL-94 V-0 classification. Furthermore, the heat release rate and total heat release values of PLA/3%FPPA composite reduced by 6.3 % and 15.3 % in cone-calorimeter test. Such high fire safety was mainly attributed to specific fire safety radicals due to thermal degradation of FPPA to interrupt composites burning in gas phase. Besides, transparency and mechanical properties were almost not changed because of low loading of FPPA in PLA. This multifunctional bio-based fire-retardant for PLA with good comprehensive performance promises broad application in engineering electronics, automobiles, 3D printing and construction materials.

Eco-friendly poly(vinyl alcohol)/partially hydrolyzed polyacrylamide/graphene oxide semi-IPN nanocomposite hydrogel as a reusable and efficient adsorbent of cationic dye methylene blue from water

Eco-friendly semi-interpenetrating polymer network (IPN) nanocomposite hydrogels composed of poly(vinyl alcohol) (PVA) chains and graphene oxide (GO) nanosheets embedded within the cross-linked partially hydrolyzed polyacrylamide (PHPAm) network were prepared in a one-stage approach via the internal ionic gelation in an aqueous solution. After full characterizations by various techniques, optimization of the hydrogel synthesis reaction condition based on the equilibrium swelling ratio criterion was performed by using Taguchi standard method. The performance of the prepared PVA/PHPAm/GO semi-IPN nanocomposite hydrogel as methylene blue (MB) adsorbent was evaluated by treating aqueous solutions in batch mode and kinetic models and isothermal models were used to describe the adsorption mechanism. The experimental results indicated that the incorporation of GO in the semi-IPN nanocomposite formulation enhanced the thermal stability, swelling ability and (MB) removal efficiency by 49% compared to empty hydrogels. Adsorption kinetics and equilibrium adsorption isotherm fitted the pseudo-second-order kinetic model and Langmuir isotherm model well, respectively. Moreover, the prepared semi-IPN hydrogel had good stability and reusability as it exhibited excellent removal efficiency of 70% after five consecutive adsorption-desorption cycles. The maximum adsorption capacity calculated from the Langmuir isotherm model reached qmax = 714.8 mg.g−1 at 30°C, obviously higher than the hydrogel prepared without this addition (293.8 mg.g−1). According to the calculated thermodynamic parameters ΔG°, ΔH°, and ΔS°, MB adsorption onto the adsorbent was a spontaneous, endothermic, and physical adsorption process.

Eco-friendly poly(dopamine)-modified glass microspheres as a novel self-floating adsorbent for enhanced adsorption of tetracycline

Hollow glass microspheres (HGM), as a promising hollow spherical ultra-light material, have the advantages of uniform particle size, regular shape, high mechanical strength and stable physical and chemical properties. It has been widely utilized in many fields but its application in water treatment is yet to be developed. Herein, a novel self-floating composite adsorbent was obtained by forming a poly(dopamine) (PDA) biomass coating on the surface of HGM and introducing sulfonic acid groups. The hollow composite material (HGM@PDA-SO3H) was utilized in the adsorptive elimination of tetracycline (TC) from aqueous solutions. In addition to great adsorption performance, HGM@PDA-SO3H also exhibited satisfactory self-floating solid-liquid separation capability. Langmuir, pseudo second-order and Elovich models correlate isotherms and kinetic data relatively well, respectively. The theoretical saturated TC adsorption amount of HGM@PDA-SO3H evaluated by Langmuir model reached 333.70 mg g−1. Thermodynamic analysis confirmed the spontaneous exothermic property of the adsorption process. There was no serious decline in the adsorption of TC by the material after 5 adsorption cycles, and the adsorbent saturated with contaminants could be easily regenerated via solution desorption, reflecting its satisfactory renewability and stability. Based on the results of batch experiments and characterization analysis, it could be concluded that the corresponding adsorption mechanisms mainly involve electrostatic attraction, hydrogen bonding and π-π stacking interactions. This research aimed to decorate HGM with biomaterials and apply it in the adsorptive purification of TC-contaminated water, which brought some insights and inspiration for the environmental application of HGM, and proved its potential applicability.

An exclusive hand protection device made of fused deposition modelling process using poly (lactic acid) polymer

The world has been hit hardest by a type of Severe Acute Respiratory Syndrome (SARS) virus called corona. This vulnerability did not leave all the superpowers in the world. The virus, is spread through coughs and sneezes. It is also spread by touching objects or parts of an infected person. For this reason, it is considered an infectious disease. It is very difficult to protect ourselves from such a contagious disease. But the World Health Organization (WHO) says there are certain guidelines to follow. The first way is to prevent the spread of COVID-19 social infection by adhering to social spaces (i.e. 2 m intervals). Second, we can protect ourselves by using appropriate safety equipment. We can also protect ourselves from the COVID-19 virus by using sanitizers or soaps. So this study focuses on a 3D-printed hand protection device for COVID- 19 infection prevention. The design, fabrication, and testing of the gadget were all successful. Thus, a low-cost and efficient device made by eco-friendly Poly Lactic Acid (PLA) polymer material and may be utilized to operate some potentially susceptible and highly infectious surfaces in a variety of public areas, where touching and using particular components is common and frequent (eg door handles, electrical switches, ATM machines).

Innovative reactive distillation process for the eco-friendly Poly(oxymethylene) dimethyl ethers synthesis from methylal and trioxane

• Improved performance of PODEn selectivity by reactive distillation technology. • A rigorous simulation model of the RD process was developed for the plant design. • The RD process for PODEn synthesis is assessed from techno-economic views. • Proposed the regulation mechanism of the parameters on the polymerization degree. Poly(oxymethylene) dimethyl ethers (PODE n ) is a promising excellent additive for diesel fuels. The PODE n production by traditional reactor conform to Schulz − Flory distribution resulting in low product yield and large circulating material flow, which leads to high energy consumption and cost. This study presents a novel reactive distillation (RD) process for the PODE n synthesis by polymerization reaction from trioxane and methylal. A rigorous simulation model of the RD process was developed for the plant design and scale-up. Also, a sensitivity analysis was performed to determine the influence of key operating parameters on the RD process performance. The production composition analysis indicates that the RD process can effectively control the degree of polymerization and obtain high selectivity for any target product(s). The techno-economic analysis shows that the process is feasible, with over 96% and 13% reduction in CapEx and OpEx, over 68% savings in total annual costs as compared to the reaction-separation technology. Higher conversion and selectivity can be obtained by RD, within lower recirculation rate (only 12281 kg/h instead of 2950 kg/h) as compared to the conventional process.

Extracted lignin from oil palm empty fruit bunch as natural eco-friendly poly (vinyl chloride) photo-stabilizer

In this work it was used extracted lignin from oil palm empty fruit bunch by kraft delignification process as environmentally friendly photo-stabilizer of Poly (vinyl chloride) thin films. Up to date writing this paper, nobody has used this type of extracted lignin as PVC photo-stabilizer. Therefor this significant application was exhibited in this study by utilizing lignin as eco-friendly photo-stabilizer of PVC. Many approaches have been applied to test the efficiency of it as natural additive of PVC. Infrared spectra shows the growing of two specific bands during irradiation belong to carbonyl (CO) and alkene (CC) groups due to the photo-degradation. It was demonstrated that using lignin inhibits the formation of these two peaks substantially and stabilize the polymer. Various other experiments were done such as weight loss percentage, average molecular weight and surface study by AFM and SEM. All the results were in agreements and proved that lignin could be used as an excellent photo-stabilizer of PVC. Moreover it was demonstrated that increasing the concentration of lignin from 0.5% to 1% per polymer weight has increase the stability of PVC. It was also suggested the mechanism of stability hence lignin is highly aromatic and has a lot of phenolic hydroxyl groups which make it a very good UV-blocker and excellent free radical scavenger.

Eco-friendly poly (hydroxybutyrate) nanocomposites: preparation and characterization

Eco-friendly poly (hydroxybutyrate) nanocomposites: preparation and characterization

Characterization of Ecofriendly Poly (Vinyl Alcohol) and Green Banana Peel Filler (GBPF) Reinforced Bio-Films

With an intention to replace the synthetic non-biodegradable films in packaging applications, the polyvinyl alcohol (PVA) blended with green banana peel filler (GBPF), the biodegradable films were prepared by solution casting method with varying the concentrations of GBPF (5–25 wt%) in PVA matrix. The bio films were characterized by Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), thermo gravimetric analysis, transmissibility, FESEM, tensile test, film solubility and water absorption, water vapour transmission (WVT), soil burial test. Based on results obtained, the changes evidenced in the FTIR spectrum of this PVA/GBPF biofilms suggest that strong hydrogen bonding is taking place due to interfacial exchanges of GBPF in PVA matrix. The XRD results showed that crystallinity of bio films are greater than PVA. Thermo gravimetric analyses predicted that PVA/GBPF bio films are thermally stable up to 300 °C. The light is 45% for transmittance in the visible light region for the PVA/GBPF (25 wt%) bio film. The FESEM micrographs of biofilms palpable that formation of good physical interaction and compatibility between polymer matrix and GBPF up to 20 wt% of GBPF in PVA Matrix. FESEM results also confirmed that higher loading of GBPF (25 wt%) in PVA matrix, observed voids and agglomerations in film surface. The PVA/GBPF bio films with 20% of GBPF gave the highest tensile strength and young’s modulus 44.5 MPa and 66.7 GPA respectively compared to other samples. The elongation at break decreases with increases the GBPF in PVA Matrix up to 20 wt%.The slight decrease in mechanical properties perceived due to higher loading of GBPF (25 wt%) with PVA matrix. The solubility, water absorption and WVT of the PVA/GBPF bio films increased upon increasing the GBPF content. The biodegradation test results discovered that he highest weight loss at 42.3% (25 wt% of GBPF) probably due to the hydrophilic nature of GBPF in PVA matrix. On the whole, the present investigation confirmed that the PVA/GBPF bio films potential for possible utilization in active packaging applications attributable to its better mechanical, thermal, optical, water absorption and biodegradation properties.