Eco-friendly Methods Research Articles

Four ecofriendly spectrophotometric methods for the determination of perindopril through derivatization with sulphophtalein dyes: application to tablet analysis

Nowadays, there is a need to expand the bank of spectrophotometric methods for the determination of perindopril in dosage forms for the purposes of routine pharmaceutical analysis, which would be simple, express, «green» and inexpensive. In the present work, perindopril in tablets was quantified via a direct simple, «green», and non-extracting spectrophotometric approach based on the formation of ion-pair complexes with sulphophtalein dyes. The absorbances of the colored reaction products were registered at 405 nm (bromocresol green, BCG), 397 nm (bromocresol purple, BCP, and bromothymol blue, BTB) and 598 nm (bromophenol blue, BPB). To achieve the highest intensity of absorbance, optimum conditions were established by the screening of many experimental factors such as optimal concentration and volume of dyes, and the time consumed for the reaction. Beer’s law was obeyed in the ranges of 0.44–3.96 µg/mL (BCG), 3.00–7.00 µg/mL (BCP), 4.00–12.00 µg/mL (BTB) and 0.44–3.52 µg/mL (BPB). All four methods were validated in accordance with ICH guidelines, confirming specificity and linearity, accuracy and precision, limits of detection and quantification, robustness. These validated methods provide a reliable and green approach for the quantitative analysis of perindopril in tablets, contributing to safer and more sustainable laboratory practices in pharmaceutical analysis.

Genetic and metabolic engineering approaches for enhanced biodesulfurization of petroleum fractions

Sulfur, an abundant component of crude oil, causes severe damage to the environment, poses risks to human health, and poisons the catalysts used in combustion engines. Hydrodesulfurization, the conventionally used method, is not sufficient to remove thiophenes like dibenzothiophene (DBT) and other aromatic heterocyclic compounds. The push for “ultra-clean” fuels, with sulfur content less than 15 ppm, drives the need for deep desulfurization. Thus, in conjunction with hydrodesulfurization, efficient and eco-friendly methods of deep desulfurization, like biodesulfurization, are desirable. In biodesulfurization, naturally desulfurizing microorganisms are used, with genetic engineering and biotechnology, to reduce the sulfur content of crude oil to below 15 ppm. In this review, we describe genetic and metabolic engineering approaches reported to date to develop more efficient methods to carry out biodesulfurization, making it a practically applicable reality.

Study the Antifungal Effects of Green Synthesized Silver Nanoparticles on the Aspergillus niger, Microsporum canis, and Candida albicans

: The increasing prevalence of drug-resistant fungal pathogens and the limitations of current antifungal therapies underscore the need for novel alternative treatments. This study aimed to evaluate the antifungal effects of green-synthesized silver nanoparticles (Ag NPs) on three clinically significant fungi: Aspergillus niger, Microsporum canis, and Candida albicans. Silver nanoparticles were synthesized using plant-based extracts to ensure eco-friendly production methods. The synthesized Ag NPs were characterized using UV spectrophotometry, Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), dynamic light scattering (DLS), zeta potential measurements, scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Characterization assays revealed spherical particles with colloidal stability, an average size of approximately 80 nm, a Polydispersity Index of 0.4, and a surface charge of 62.3 mV. Minimum inhibitory concentration (MIC) values demonstrated effective suppression of fungal growth at low nanoparticle concentrations. In conclusion, our study highlights the potential of green-synthesized Ag NPs as a promising alternative to conventional antifungal agents, emphasizing their significant advantages in biocompatibility and eco-friendliness. These findings could pave the way for a new era in treating fungal infections, particularly those caused by drug-resistant strains.

Phenolic Content, Antioxidant and Antimicrobial Properties of Hawthorn (Crataegus orientalis) Fruit Extracts Obtained via Carbohydrase-Assisted Extraction

The enzyme-assisted approaches for plant phenolics extraction are more eco-friendly methods compared to acid or alkaline hydrolysis. Carbohydrase enzymes can release free phenolics from plant materials by cleaving the glycosidic bonds between phenolic compounds and cell wall polymers. In this study, the efficiency of carbohydrase-assisted treatment approaches was evaluated to extract bioactive phenolics from hawthorn (Crataegus orientalis) fruit residues. Enzymatic treatment of the fruits was operated by using a crude cellulolytic enzyme cocktail from Rhizomucor miehei NRRL 5282 and a pectinase preparate from Aspergillus niger. Both cellulase and combined cellulase–pectinase treatments improved the total phenolic content (TPC) and antioxidant activity of extracts. The TPC increased to 1899 ± 27 mg gallic acid equivalents/100 g dry matter during the combined enzyme treatment, showing a strong correlation with the average antioxidant capacity determined by ferric-reducing antioxidant power (1.7-fold increment) and 2,2-diphenyl-1-picrylhydrazyl (1.15-fold increment) reagents. The major phenolics in enzyme-treated extracts were vanillic and ferulic acids, the concentrations of which increased 115.6-fold and 93.9-fold, respectively, during carbohydrase treatment. The planktonic growth of Escherichia coli, Bacillus subtilis, Pseudomonas aeruginosa, and Chromobacterium violaceum was slightly inhibited by the extracts with minimum inhibitory concentration values between 15.0 and 77.9 mg/mL, while the yeasts tested were quite resistant to the samples. B. subtilis and yeast biofilms were sensitive to the enzyme-treated extracts, which also showed quorum-sensing inhibitory effects against C. violaceum. The obtained bioactive hawthorn extracts hold potential as a natural source of antioxidants and antimicrobials.

Sustainable Management of Agro-Food Wastes Derived from the Olive Mill and Sugar Industry and Clinoptilolite to Produce Novel Adsorptive Materials

Novel sorbents were produced using sustainable and eco-friendly methods, aimed at minimizing environmental impact while utilizing industrial by-products and natural minerals. Olive stones and molasses derived from olive mill and sugar industries, respectively, and an abundant, natural and low-cost mineral, clinoptilolite, were combined in the following proportions: 80/20 clinoptilolite/stone, 80/10/10 clinoptilolite/stone/molasses, 50/50 stone/molasses, w/w. Then, physical carbonization (CL80OL20C, CL80OL10M10C, OL50M50C) or chemical activation (CL80OL20A, CL80OL10M10A, OL50M50A) took place. The adsorbents were characterized through Raman, FT-IR, BET and SEM-EDS analysis. The CL80OL20A material presents the highest ratio of C/O in EDS analysis and the lowest ID/IG in Raman spectroscopy. The increase in the specific surface area is as follows: OL50M50C < OL50M50A < CL80OL10M10C < CL80OL20C < CL80OL20A < CL80OL10M10A. Three applications were conducted: two with dyes (methylene blue and methyl red) in aqueous means and one in olive mill wastewaters for the removal of total phenols and their addition to rice, increasing the total phenolic content and producing novel foods. The well-fitted application of the pseudo-second order kinetic model to the experimental data has shown that chemisorption is the prevailing mechanism. The adsorbed amount of the recovered phenols to rice ranges from 0.14 to 0.93 mg/g. Consequently, olive and sugar by-products can be used as filters either to adsorb dangerous organic compounds or to recover bioactive compounds from wastewater, preventing their disposal in the environment, which could otherwise lead to severe negative effects on the ecosystems.

Transitioning practices of vegetable small-scale actors in Vietnam: an interplay of food safety, labor demand, and soil environment

AbstractFood safety is a critical and persistent issue that challenges the sustainability of agri-food systems in Vietnam. The government has launched multiple food safety initiatives, but there is limited understanding of their contribution to changing the practices of small-scale producers and distributors. This study explores these changing practices by applying Social Practice Theory (SPT) to analyze the transitions in everyday routines of small-scale vegetable producers while being embedded in socio-institutional contexts of agri-food system transitions. We conducted semi-structured interviews and survey with small-scale food producers and distributors in Hanoi, Vietnam to examine the transitions in production and post-production practices over the last 20 years and the intersection between smallholding practices and cross-level dynamics. The study revealed, contrary to some common perceptions, that smallholder producers are transitioning towards food safety, with the use of more bio-pesticides and eco-friendly pest control methods. The smallholders also reproduce a variety of (sustainable) intensification practices, including crop rotation, organic fertilization, and soil cultivation, to sustain soil fertility and save labor. However, there are no clear patterns of change for post-production practices, although they have been diversifying under the impacts of urbanization. The findings highlight the interplay of food safety, labor, and soil environment in shaping the transitions of smallholder practices. We suggest that success in improving safety in production practices is feasible, but that this requires more thorough interventions in distribution and consumption practices to transform the food systems at large.

Copper-Driven Formation of Prothioconazole Nanocomplex: An Innovative Strategy to Prepare Nanopesticide with Improved Bioactivity and Reduced Environmental Impacts.

Developing cost-effective, energy-saving, and eco-friendly methods to construct nanopesticides fulfill the requirement of modern agriculture. Benefiting from the versatility of metal-based complexes, a facile copper-driven method is discovered for the formation of a fungicide prothioconazole nanocomplex (Cu-Pro) with the particle size of ≈300 ± 85 nm. Interestingly, adding 0.5-1% of anionic surfactants could generate nanocomplexes within 60 ± 12 nm and form stable dispersed nanosuspensions. Both nanocomplexes exhibit remarkable control efficacy against six plant pathogenic fungi, and the EC50 values are 1.4-4.8 times lower than that of prothioconazole technical concentrate (Pro TC). In addition, the novel nanocomplexes demonstrate better resistance against UV irradiation and the half-lives are 3.27- and 1.56-times longer than that of Pro TC, respectively. The acute toxicity of prothioconazole nanocomplexes against non-target organism zebrafish is decreased. Due to the small size and chelation with metals, the uptake and accumulation of prothioconazole in wheat plant is promoted, and the metabolites prothioconazole-desthio is significantly decreased by 42-48% than that of Pro TC. This metal coordination-based strategy seeks to open a new avenue for the high-throughput preparation of nanopesticides, providing an innovative toolbox for reducing the input of agrochemicals in sustainable plant protection.

Synthesis of metal nanoparticles on graphene oxide and antibacterial properties.

Pathogen-induced infections and the rise of antibiotic-resistant bacteria, such as Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), pose significant global health challenges, emphasizing the need for new antimicrobial strategies. In this study, we synthesized graphene oxide (GO)-based composites functionalized with silver nanoparticles (AgNPs) and copper nanoparticles (CuNPs) as potential alternatives to traditional antibiotics. The objective is to assess the antibacterial properties of these composites and explore their efficacy against E. coli and S. aureus, two common bacterial pathogens. The composites are prepared using eco-friendly and conventional methods to ensure effective nanoparticle attachment to the GO surface. Structural and morphological characteristics are confirmed through SEM, AFM, EDS, XRD, UV-vis, FTIR, and Raman spectroscopy. The antibacterial efficacy of the composites is tested through disk diffusion assays, colony-forming unit (CFU) counts, and turbidimetry analysis, with an emphasis on understanding the effects of different nanoparticle concentrations. The results demonstrated a dose-dependent antibacterial effect, with GO/AgNP-1 showing superior antibacterial activity over GO/AgNP-2, particularly at lower concentrations (32.0μg/mL and 62.5μg/mL). The GO/CuNP composite also exhibited significant antibacterial properties, with optimal performance at 62.5μg/mL for both bacterial strains. Turbidimetry analysis confirmed the inhibition of bacterial growth, especially at moderate concentrations, although slight nanoparticle aggregation at higher doses reduced efficacy. Lastly, both GO/AgNP and GO/CuNP composites demonstrated significant antibacterial potential. The results emphasize the need to fine-tune nanoparticle concentration and refine synthesis techniques to improve their efficacy, positioning these composites as strong contenders for antimicrobial use.

The Microbiologically Influenced Corrosion and Protection of Pipelines: A Detailed Review

Microbial corrosion is the deterioration of materials associated with microorganisms in environments, especially in oil- and gas-dominated sectors. It has been widely reported to cause great losses to industrial facilities such as drainage systems, sewage structures, food-processing equipment, and oil and gas facilities. Generally, bacteria, viruses, and other microorganisms are the most important microorganisms associated with microbial corrosion. The destructive nature of these microorganisms differs based on the kind of bacteria involved in the corrosion mechanism. Amongst the microorganisms related to microbial corrosion, sulfate-reducing bacteria (SRB) is reported to be the most common harmful bacteria. The detailed mechanistic explanations relating to the corrosion of pipelines by sulfate-reducing bacteria are discussed. The mechanism of microbial corrosion in pipelines showing the formation of pitting corrosion and cathodic depolarization is also reported. The current review provides theoretical information for the control and protection of pipelines caused by microbial corrosion and how new eco-friendly protection methods could be explored.

Development, Validation, and Greenness Assessment of Eco-Friendly Analytical Methods for the Determination of Abiraterone Acetate in Pure Form and Pharmaceutical Formulations

This study presents the development and validation of environmentally friendly analytical methods for quantifying Abiraterone Acetate (AA) in both its pure form and commercial pharmaceutical formulations. An optimized High-Performance Liquid Chromatography (HPLC) method was developed using an Agilent Extend C18 column (250 mm × 4.6 mm, 5 μm) at 25 °C. The mobile phase consisted of formic acid and ethanol in isocratic mode, with a flow rate of 1.0 mL min−1, and detection was performed at 253 nm. The spectrophotometric method involved a comprehensive evaluation of AA’s spectral properties in various solvents, with ultrapure water providing the most suitable spectra for analysis at 253 nm. Both methods were validated according to ICH guidelines, demonstrating selectivity, linearity, accuracy, precision, detection and quantification limits, and robustness, with correlation coefficients exceeding 0.999 across the 5–30 μg mL−1 concentration range. Comparative statistical analysis using Student’s t-test and Fisher’s F-test showed no significant differences between the two methods. The environmental impact of both methods was assessed using AGREE and GAPI software, confirming their sustainability. These validated methods offer reliable and eco-friendly approaches for the quantitative analysis of AA in tablet formulations, promoting safer and greener laboratory practices in pharmaceutical analysis.

Simple simultaneous analysis of various cardiovascular drug mixtures with vincamine: comparative eco-friendly assessment

The development of two eco-friendly analytical methods for the simultaneous determination of eight cardiovascular drugs; hydrochlorothiazide (HCT), captopril (CPL), lisinopril (LSP), valsartan (VAL), atorvastatin (ATR), bisoprolol (BSL), amlodipine (AML) and carvedilol (CVL); alongside with the nutraceutical vincamine (VIC) is essential for sustainable pharmaceutical analysis. This study explores the application of Micellar Electro Kinetic Chromatography (MEKC) and High-Performance Liquid Chromatography (HPLC) for this purpose. In MEKC method, the separation was done using fused silica capillary (41.5 cm × 50 µm id) and a back ground electrolyte consisting of 50 mM borate buffer (pH 9) containing 50 mM sodium lauryl sulphate (SLS) and 10% organic modifier (Acetonitrile). In HPLC method, separation was performed on a ZORBAX Extend-C18 (4.6 × 250 mm, 5 µm) column, using a gradient mobile phase consisting of 50 mM phosphate buffer pH 3 and methanol. Both methods attained good linearity (r ≥ 0.9996) with low values of LOD and LOQ. Both methods were successfully applied in the determination of co-administered single, binary and ternary dosage form of the studied drugs. Moreover, application of various combinations of co-administered dosage forms was achieved in rat plasma, confirming the applicability of these methods in different matrices. The use of micellar solutions in MEKC enhances separation efficiency while reducing the need for organic solvents, aligning with green chemistry principles. HPLC methods were optimized using environmentally benign solvents, ensuring reduced toxicity and waste production. The methodologies were evaluated through green, white, and blue metrics to ensure comprehensive sustainability, considering ecological impact, safety, and practical efficiency. These methods were not only cost-effective and time-saving but achieved high efficiency, sensitivity, and reproducibility making them ideal for routine use in pharmaceutical analysis.

Structural design and performance correlation of porous Poly(ionic liquid)S for 2-bromophenol adsorption

The demand for bromophenol is on the rise, driven by its extensive applications in industries, including human medicine. This surge in demand has spurred the development of eco-friendly methods for bromophenol recovery and the synthesis of new, low-toxicity compounds. In our study, we prepared a novel poly(ionic liquid) (PIL) featuring a benzene ring. The synthesis of this PIL involved using benzyl alcohol as the primary crosslinking agent, dimethoxymethane as an auxiliary crosslinking agent, and an imidazolium-based ionic liquid monomer, [Dimbb]Cl₂, for the adsorption of 2-bromophenol from aqueous solutions. We designed the PIL to be a high-performance and sustainable adsorbent by optimizing its specific surface area and pore structure. Structural analysis revealed that the PILs have a highly rich micro-mesoporous structure. The adsorption kinetics conformed to pseudo-second-order kinetics, reaching equilibrium in just 6 min. According to the Langmuir model, PIL-1 demonstrated a remarkable maximum adsorption capacity of 434.71 mg/g for 2-bromophenol. Quantum chemical calculations suggested that the adsorption mechanism involves processes such as pore filling, hydrogen bonding, electrostatic interactions, and π-π interactions. Furthermore, the adsorbent can be effectively recovered at least five times using anhydrous ethanol as the desorption agent, while maintaining an adsorption efficiency exceeding 90 %.

A Comprehensive Review on Deep Eutectic Solvents: Their Current Status and Potential for Extracting Active Compounds from Adaptogenic Plants.

Deep eutectic solvents (DESs) have attracted attention from researchers as novel compounds for extracting active substances because of their negligible toxicity, polarity, and ability to be tailored depending on the experiment. In this review, we discuss deep eutectic solvents as a promising medium for the extraction of adaptogenic compounds. In comparison to traditional methods, extraction with the use of DESs is a great alternative to the excessive usage of harmful organic solvents. It can be conducted in mild conditions, and DESs can be designed with different precursors, enhancing their versatility. Adaptogenic herbs have a long medicinal history, especially in Eastern Asia. They exhibit unique properties through the active compounds in their structures, including saponins, flavonoids, polysaccharides, and alkaloids. Therefore, they demonstrate a wide range of pharmaceutical effects, such as anti-inflammatory, antibacterial, and anticancer abilities. Since ancient times, many different adaptogenic herbs have been discovered and are well known, including Panax ginseng, Scutellaria baicalensis, and Schisandra chinensis. Active compounds can be extracted using standard methods, such as hydrolyzation, maceration, and conventional reflux extraction. However, due to the limitations of classical processing technologies, there has been a need to develop new and eco-friendly methods. We focus on the types of solvents, extraction efficiency, properties, and applications of the obtained active compounds. This review highlights the potential of DESs as eco-friendly alternatives for extracting bioactive compounds.

Development of sustainable, high strength slag based alkali activated pavement quality concrete using agro-industrial wastes: properties and life cycle analysis

ABSTRACT Alkali-activated binder-based composites offer a sustainable alternative to cement-based systems, giving a conservational approach. This research incorporated rice-husk ash (RHA) and waste foundry sand (WFS) into ground-granulated-blast-furnace slag (GGBS)-based alkali-activated high-end pavement-quality concretes, optimising with air-curing for expressways, freeways and runway applications. This study promotes sustainable construction by efficiently utilising agro-industrial wastes (i.e., RHA, GGBS and WFS) promoting a global initiative to decrease environmental impact and to adopt eco-friendly pavement construction methods. This study systematically substitutes the primary binder-GGBS with RHA at 5% intervals. The binder was alkali-activated using measured amounts of liquid sodium silicate and sodium hydroxide flakes prepared at an activator modulus (Ms) of 1.25 by maintaining the sodium oxide dosage of 4.0% with respect to the total binder. In particular, 15% RHA (with 85% GGBS) and 20% WFS (with 80% river sand) satisfy mechanical design standards for workability and strength. A comprehensive life cycle analysis using extensive literature support assesses the environmental impact and sustainability of developed pavement quality composites, showing over 70% less energy use than Portland cement-based pavement mixes. Therefore, employing RHA and WFS in air-cured alkali-activated composite manufacture shows that agro-industrial waste components may be used to make sustainable, cost-effective pavement construction. This study effectively advocates for a shift towards environmentally responsible pavement construction, contributing to a greener, more sustainable future in concrete pavement engineering.

Harnessing stakeholder engagement for sustainable agricultural intensification: contemporary evidence from northern Ghana

This article analyses the indispensable role of sustainable agricultural intensification practices (SAIP) in meeting the needs of a burgeoning human population with limited planetary resources and examines the role of various stakeholders in the adoption of these practices by local farmers. The study setting is the Upper West, a semi-arid region of Ghana. The study employs a stakeholder salience theory and a mixed-method design. Firstly, qualitative data were collected and analysed as a basis for formulating a structured questionnaire administered to beneficiary farmers, which were then analysed using marginal effects from logistic regression. Notably, the study found four sustainable crop cultivation practices and three eco-friendly crop storage methods promoted in the area. Furthermore, the engagement of stakeholders like selected farmers, Traditional authorities, and implementing NGOs had statistically significant effects on the adoption of SAIP. However, these effects were smaller when compared to the direct involvement of all beneficiary farmers in the planning and implementation of the intervention. This suggests that while technocrats and authorities are important, they alone cannot achieve the desired impact of development interventions. Beneficiary farmers are the most critical stakeholders in adopting and promoting SAIP. The article further proposes a conceptual framework for implementing SAIP in agro-based rural communities. This research therefore underscores the importance of sustainable agricultural intensification practices in a resource-constrained world and emphasizes the central role of beneficiary farmers in driving the success of such initiatives.

Spray-Deposited TiO2 Layers on Aluminum Foil for Sustainable Water Remediation

In this study, we developed TiO2-coated aluminum (TiO2/Al) surfaces using eco-friendly methods to create efficient and environmentally friendly photoactive materials with the potential to enhance water purification systems. TiO2 particles were deposited onto aluminum foil surfaces via a spray method, followed by heat treatment at 200 °C for 15 min. The morphology of the TiO2/Al surfaces, both before and after photocatalytic treatment, was characterized using scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS). The photocatalytic properties of these modified surfaces were evaluated through the degradation of rhodamine B (RB), methylene blue (MB), and methyl orange (MO) under simulated solar and UV–LED irradiation. Among the dyes tested, MO exhibited the highest degradation, influenced by factors such as absorption maximum, molecular structure, charge, and the number of condensed rings. The computational study of interactions between dye molecules and the combined nanoparticle revealed that the binding was the strongest in the case of MO dye. This study also explored the influence of varying the number of TiO2/Al surfaces in solution (one, five, and ten) on the photodegradation efficiency. The solution with five TiO2/Al surfaces demonstrated optimal performance, achieving a 16% degradation of RB. The reusability of the TiO2/Al surfaces was confirmed through five successive runs of RB degradation. The results indicate that TiO2/Al surfaces are a promising solution for addressing water contamination challenges and advancing sustainable water treatment practices.

The Environmental Impacts of Future Global Sales of Hydrogen Fuel Cell Vehicles

During the last decade, developing more sustainable transportation modes has become a primary objective for car manufacturers and governments around the world to mitigate environmental issues, such as climate change, the continuous increase in greenhouse gas (GHG) emissions, and energy depletion. The use of hydrogen fuel cell technology as a source of energy in electric vehicles is considered an emerging and promising technology that could contribute significantly to addressing these environmental issues. In this study, the effects of Hydrogen Fuel Cell Battery Electric Vehicles (HFCBEVs) on global GHG emissions compared to other technologies, such as BEVs, were determined based on different relevant factors, such as predicted sales for 2050 (the result of the developed prediction model), estimated daily traveling distance, estimated future average global electricity emission factors, future average Battery Electric Vehicle (BEV) emission factors, future global hydrogen production emission factors, and future average HFCBEV emission factors. As a result, the annual GHG emissions produced by passenger cars that are expected to be sold in 2050 were determined by considering BEV sales in the first scenario and HFCBEV replacement in the second scenario. The results indicate that the environmental benefits of HFCBEVs are expected to increase over time compared to those of BEVs, due to the eco-friendly methods that are expected to be used in hydrogen production in the future. For instance, in 2021, HFCBEVs could produce more GHG emissions than BEVs by 54.9% per km of travel, whereas in 2050, BEVs could produce more GHG emissions than HFCBEVs by 225% per km of travel.

Innovative synthesis and molecular modeling of actinomycetes-derived silver nanoparticles for biomedical applications

The rising demand for innovative antimicrobial solutions has shifted focus towards silver nanoparticles (AgNPs), especially those produced through eco-friendly methods. This study introduces a novel approach utilizing actinomycetes strains—Streptomyces albus, Micromonospora maris, and Arthrobacter crystallopoietes—to biosynthesize AgNPs with remarkable antibacterial properties. Through molecular characterization, we identified unique features of these nanoparticles, and computational modeling suggested significant ion-ligand interactions with proteins 6REV and 3K07. Our research highlights the promise of these biogenically synthesized nanoparticles in advancing biomedical applications. Actinomycetes were sourced and screened for their ability to produce metallic nanoparticles, revealing that among 35 samples, only six showed this capability. Notably, Streptomyces albus strain smmdk14 (OR685674), Micromonospora maris strain smmdk13 (OR685672), and Arthrobacter crystallopoietes strain smmdk12 (OR685674) were identified as effective silver nanoparticle producers. The synthesized nanoparticles demonstrated potent antibacterial activity against common pathogens including E. coli, Pseudomonas aeruginosa, Klebsiella spp., Enterococcus faecalis, Staphylococcus aureus, and Acinetobacter spp. The data obtained from color change observation, UV–visible spectrophotometry, Zeta potential, FTIR spectroscopy, and transmission electron microscopy (TEM) characterized AgNPs potentiality. The nanoparticles were spherical, with sizes ranging from 6.46 nm to 24.7 nm. Optimization of production conditions, comparison of antimicrobial effects with antibiotics, evaluation of potential toxicity, and assessment of wound-healing capabilities were also conducted. The biosynthesized AgNPs exhibited superior antibacterial properties compared to traditional antibiotics and significantly accelerated wound healing by approximately 66.4 % in fibroblast cell cultures. Additionally, computational analysis predicted interactions between various metal ions and specific amino acid residues in proteins 6REV and 3K07. Overall, this study demonstrates the successful creation of AgNPs with notable antibacterial and wound-healing properties, underscoring their potential for medical applications.

Experimental evaluation of green nanofluids in heat exchanger made oF PDMS

Conventional methods for synthesizing metallic nanoparticles face challenges such as instability and environmental concerns. Therefore, new, simpler, and more eco-friendly methods are being explored. In this context, the study reports a green synthesis process to produce magnetic iron oxide nanoparticles using an aqueous extract of the alga Chlorella vulgaris. This process leverages natural resources to create a sustainable nanofluid known as green nanofluid. To evaluate the characteristics of this nanofluid, experimental measurements of wettability, viscosity, thermal conductivity, and qualitative stability analysis were conducted. An experimental setup consisting of a heat exchanger made of polydimethylsiloxane (PDMS) was used to assess the thermal performance and the results were compared to theoretical equations and numerical simulation. Additionally, thermographic imaging of temperature gradients as the fluids passed over the heated surface of the serpentine channel were made. The main findings confirmed that the nanofluid was more stable than that obtained by traditional methods and had a more uniform temperature distribution over the heat exchanger. The higher concentration exhibited superior thermal performance compared to DI-Water. Moreover, the green nanofluid was used at a weight concentration of 0.1 wt%, provided thermal performance results of nearly 4.5% superior to those estimated by the numerical model and 6.4% higher than those experimentally obtained with the base fluid, respectively. Finally, the results obtained for the nanofluid also showed an average increase of around 5% in the viscosity of the base fluid, with a more significant sedimentation at a concentration of 0.1 wt%.

Interfacial coupling of sandwich like Zn3V2O8/ZnO/NiCo2S4 nano-heterojunction for the enhanced photocatalytic degradation of rifampicin

The overuse of antibiotics and the release of these pharmaceuticals into the water system has emerged as a serious issue posing a life-threatening environment to aquatic species. In contrast to various contaminants, antibiotics are specifically engineered for durability and efficacy in the system of the human body (human health). Although this design ensures their performance, it also results in their extended longevity and resilience against degradation in natural contexts. These challenges can be addressed by an advanced oxidation process (AOP) utilizing ternary heterojunction nano catalysts (NCs). In this study, the NCs were synthesized through a combination of calcinated-assisted reverse microemulsion and hydrothermal methods. The synthesized NCs were characterized by using various analytical techniques. The enhanced charge separation and migration in Zn3V2O8/ZnO/NiCo2S4 (ZZN) NCs results in 97.3 % degradation of rifampicin (RIF) within 80 min. ZZN NCs exhibit superior catalytic performance under visible light irradiation compared to its pristine Zn3V2O8, ZnO, NiCo2S4, and binary ZnO/NiCo2S4. The enhanced photocatalytic performance can be primarily attributed to the synergetic effects among Zn3V2O8, ZnO, and NiCo2S4 facilitated by the cascade-driven charge transfer mechanism. The prominent reactive oxygen species that participated in photocatalytic degradation activity were found to be superoxide (O2•-) and hydroxide radicals (•OH) which were confirmed through ESR and quenching experiments. From the practical application perspective, ZZN NCs ternary heterostructure demonstrated excellent stability and durability after being recycled six times. This study serve as a vital reference for future investigation into the photocatalytic mechanism related to heterostructure NCs, highlighting their potential for eco-friendly methods to eliminate pollutants and paves a way for manufacturing innovation in near future.