Dynamic Nuclear Polarization Nuclear Magnetic Resonance Research Articles

Dynamic Nuclear Polarization of Inorganic Halide Perovskites.

The intrinsic low sensitivity of nuclear magnetic resonance (NMR) experiments limits their utility for structure determination of materials. Dynamic nuclear polarization (DNP) under magic angle spinning (MAS) has shown tremendous potential to overcome this key limitation, enabling the acquisition of highly selective and sensitive NMR spectra. However, so far, DNP methods have not been explored in the context of inorganic lead halide perovskites, which are a leading class of semiconductor materials for optoelectronic applications. In this work, we study cesium lead chloride and quantitatively compare DNP methods based on impregnation with a solution of organic biradicals with doping of high-spin metal ions (Mn2+) into the perovskite structure. We find that metal-ion DNP provides the highest bulk sensitivity in this case, while highly surface-selective NMR spectra can be acquired using impregnation DNP. The performance of both methods is explained in terms of the relaxation times, particle size, dopant concentration, and surface wettability. We envisage the future use of DNP NMR approaches in establishing structure-activity relationships in inorganic perovskites, especially for mass-limited samples such as thin films.

The Effect of Disorder on Endogenous MAS-DNP: Study of Silicate Glasses and Crystals.

In dynamic nuclear polarization nuclear magnetic resonance (DNP-NMR) experiments, the large Boltzmann polarization of unpaired electrons is transferred to surrounding nuclei, leading to a significant increase in the sensitivity of the NMR signal. In order to obtain large polarization gains in the bulk of inorganic samples, paramagnetic metal ions are introduced as minor dopants acting as polarizing agents. While this approach has been shown to be very efficient in crystalline inorganic oxides, significantly lower enhancements have been reported when applying this approach to oxide glasses. In order to rationalize the origin of the difference in the efficiency of DNP in amorphous and crystalline inorganic matrices, we performed a detailed comparison in terms of their magnetic resonance properties. To diminish differences in the DNP performance arising from distinct nuclear interactions, glass and crystal systems of similar compositions were chosen, Li2OCaO·2SiO2 and Li2CaSiO4, respectively. Using Gd(III) as polarizing agent, DNP provided signal enhancements in the range of 100 for the crystalline sample, while only up to around factor 5 in the glass, for both 6Li and 29Si nuclei. We find that the drop in enhancement in glasses can be attributed to three main factors: shorter nuclear and electron relaxation times as well as the dielectric properties of glass and crystal. The amorphous nature of the glass sample is responsible for a high dielectric loss, leading to efficient microwave absorption and consequently lower effective microwave power and an increase in sample temperature which leads to further reduction of the electron relaxation time. These results help rationalize the observed sensitivity enhancements and provide guidance in identifying materials that could benefit from the DNP approach.

Triangulating Dopant-Level Mn(II) Insertion in a Cs2NaBiCl6Double Perovskite Using Magnetic Resonance Spectroscopy

Lead-free metal halide double perovskites are gaining increasing attention for optoelectronic applications. Specifically, doping metal halide double perovskites using transition metals enables broadband tailorability of the optical bandgap for these emerging semiconducting materials. One candidate material is Mn(II)-doped Cs2NaBiCl6, but the nature of Mn(II) insertion on chemical structure is poorly understood due to low Mn loading. It is critical to determine the atomic-level structure at the site of Mn(II) incorporation in doped perovskites to better understand the structure-property relationships in these materials and thus to advance their applicability to optoelectronic applications. Magnetic resonance spectroscopy is uniquely qualified to address this, and thus a comprehensive three-pronged strategy, involving solid-state nuclear magnetic resonance (NMR), high-field dynamic nuclear polarization (DNP), and electron paramagnetic resonance (EPR) spectroscopies, is used to identify the location of Mn(II) insertion in Cs2NaBiCl6. Multinuclear (23Na, 35Cl, 133Cs, and 209Bi) one-dimensional (1D) magnetic resonance spectra reveal a low level of Mn(II) incorporation, with select spins affected by paramagnetic relaxation enhancement (PRE) induced by Mn(II) neighbors. EPR measurements confirm the oxidation state, octahedral symmetry, and low doping levels of the Mn(II) centers. Complementary EPR and NMR measurements confirm that the cubic structure is maintained with Mn(II) incorporation at room temperature, but the structure deviates slightly from cubic symmetry at low temperatures (<30 K). HYperfine Sublevel CORrelation (HYSCORE) EPR spectroscopy explores the electron-nuclear correlations of Mn(II) with 23Na, 133Cs, and 35Cl. The absence of 209Bi correlations suggests that Bi centers are replaced by Mn(II). Endogenous DNP NMR measurements from Mn(II) → 133Cs (<30 K) reveal that the solid effect is the dominant mechanism for DNP transfer and supports that Mn(II) is homogeneously distributed within the double-perovskite structure.

Design and Simulation Studies of a Continuously Tunable Sub-THz Gyrotron Using Magnetic and Thermal Tuning Schemes

In this article, the frequency tunability of a sub-Terahertz (THz) gyrotron has been investigated using both magnetic and thermal tuning schemes. A triode-type magnetron injection gun (MIG) has been designed using an electron optics tool, which predicted an annular electron beam with a < 4% velocity spread. Furthermore, the cavity has been modeled to operate in the TE11,2 mode at 527 GHz for dynamic nuclear polarization-nuclear magnetic resonance (DNP/NMR) applications. The transient behavior of the present gyrotron has been studied using a time-dependent self-consistent multimode code. A maximum continuous wave (CW) power of ~14 W was obtained at 527.20 GHz with 16.75 kV, 90 mA, and 1.85 pitch of e-beam. The tunable bandwidth has been obtained as ~0.31 GHz (527.20–527.51 GHz) by using a magnetic tuning scheme and ~0.31 GHz (526.90–527.20 GHz) by using the thermal tuning scheme by taking advantage of gyrotron sensitivity on cavity structural parameters and cavity shape.

Dynamic Nuclear Polarization Enables NMR of Surface Passivating Agents on Hybrid Perovskite Thin Films.

Surface and bulk molecular modulators are the key to improving the efficiency and stability of hybrid perovskite solar cells. However, due to their low concentration, heterogeneous environments, and low sample mass, it remains challenging to characterize their structure and dynamics at the atomic level, as required to establish structure–activity relationships. Nuclear magnetic resonance (NMR) spectroscopy has revealed a wealth of information on the atomic-level structure of hybrid perovskites, but the inherent insensitivity of NMR severely limits its utility to characterize thin-film samples. Dynamic nuclear polarization (DNP) can enhance NMR sensitivity by orders of magnitude, but DNP methods for perovskite materials have so far been limited. Here, we determined the factors that limit the efficiency of DNP NMR for perovskite samples by systematically studying layered hybrid perovskite analogues. We find that the fast-relaxing dynamic cation is the major impediment to higher DNP efficiency, while microwave absorption and particle morphology play a secondary role. We then show that the former can be mitigated by deuteration, enabling 1H DNP enhancement factors of up to 100, which can be harnessed to enhance signals from dopants or additives present in very low concentrations. Specifically, using this new DNP methodology at a high magnetic field and with small sample volumes, we have recorded the NMR spectrum of the 20 nm (6 μg) passivating layer on a single perovskite thin film, revealing a two-dimensional (2D) layered perovskite structure at the surface that resembles the n = 1 homologue but which has greater disorder than in bulk layered perovskites.

Multiple Dynamic Nuclear Polarization Mechanisms in Carbonaceous Materials: From Exogenous to Endogenous 13C Dynamic Nuclear Polarization-Nuclear Magnetic Resonance up to Room Temperature

Carbonaceous materials are ubiquitous in energy storage and conversion systems due to their versatile chemical and physical properties. The surface chemistry of carbonaceous materials strongly affects their properties, and there is therefore great interest in determining the chemical composition of different carbon allotropes. Solid-state nuclear magnetic resonance spectroscopy is well suited for providing atomic-level structural information, especially when equipped with sensitivity from dynamic nuclear polarization (DNP). Exogenous DNP from nitroxide biradicals is the most efficient approach, typically providing 102–104 fold enhancement in surface sensitivity. Herein, we consider the application of DNP in the study of the surface chemistry of carbonaceous materials through natural abundance 13C detection. We found that with TEKPol biradicals, the polarization transfer via 1H-13C cross-polarization is limited to the solvent and does not propagate to the sample surface. We thus investigated in detail polarization transfer directly to 13C nuclei and found multiple interfering mechanisms when employing the exogenous DNP approach: (a) direct 13C polarization from the biradicals, (b) opposite enhancements due to heteronuclear cross-relaxation leading to the solvent Overhauser effect, and (c) solid effect from defects and delocalized electrons within the carbons. While the endogenous electron polarization interferes with the utilization of exogenous DNP, it provides significant surface sensitivity with signal enhancements of up to 50 and 20 for 13C and 1H, respectively. Moreover, we show that endogenous DNP can be used at a wide range of temperatures, providing close to a 10-fold increase in 13C and 1H signals at room temperature through differing DNP mechanisms. This approach opens the way for efficient detection of carbon surface chemistry under ambient conditions.

Challenges and Advances in the Application of Dynamic Nuclear Polarization to Liquid-State NMR Spectroscopy.

Nuclear magnetic resonance (NMR) spectroscopy is a powerful method to study the molecular structure and dynamics of materials. The inherently low sensitivity of NMR spectroscopy is a consequence of low spin polarization. Hyperpolarization of a spin ensemble is defined as a population difference between spin states that far exceeds what is expected from the Boltzmann distribution for a given temperature. Dynamic nuclear polarization (DNP) can overcome the relatively low sensitivity of NMR spectroscopy by using a paramagnetic matrix to hyperpolarize a nuclear spin ensemble. Application of DNP to NMR can result in sensitivity gains of up to four orders of magnitude compared to NMR without DNP. Although DNP NMR is now more routinely utilized for solid-state (ss) NMR spectroscopy, it has not been exploited to the same degree for liquid-state samples. This Review will consider challenges and advances in the application of DNP NMR to liquid-state samples. The Review is organized into four sections: (i) mechanisms of DNP NMR relevant to hyperpolarization of liquid samples; (ii) applications of liquid-state DNP NMR; (iii) available detection schemes for liquid-state samples; and (iv) instrumental challenges and outlook for liquid-state DNP NMR.

Evaluation of enzymatic and magnetic properties of γ-glutamyl-[1-13C]glycine and its deuteration toward longer retention of the hyperpolarized state.

Dynamic nuclear polarization (DNP) is an emerging cutting-edge method of acquiring metabolic and physiological information in vivo. We recently developed γ-glutamyl-[1-13C]glycine (γ-Glu-[1-13C]Gly) as a DNP nuclear magnetic resonance (NMR) molecular probe to detect γ-glutamyl transpeptidase (GGT) activity in vivo. However, the detailed enzymatic and magnetic properties of this probe remain unknown. Here, we evaluate a γ-Glu–Gly scaffold and develop a deuterated probe, γ-Glu-[1-13C]Gly-d2, that can realize a longer lifetime of the hyperpolarized signal. We initially evaluated the GGT-mediated enzymatic conversion of γ-Glu–Gly and the magnetic properties of 13C-enriched γ-Glu–Gly (γ-Glu-[1-13C]Gly and γ-[5-13C]Glu–Gly) to support the validity of γ-Glu-[1-13C]Gly as a DNP NMR molecular probe for GGT. We then examined the spin-lattice relaxation time (T1) of γ-Glu-[1-13C]Gly and γ-Glu-[1-13C]Gly-d2 under various conditions (D2O, PBS, and serum) and confirmed that the T1 of γ-Glu-[1-13C]Gly and γ-Glu-[1-13C]Gly-d2 was maintained for 30 s (9.4 T) and 41 s (9.4 T), respectively, even in serum. Relaxation analysis of γ-Glu-[1-13C]Gly revealed a significant contribution of the dipole–dipole interaction and the chemical shift anisotropy relaxation pathway (71% of the total relaxation rate at 9.4 T), indicating the potential of deuteration and the use of a lower magnetic field for realizing a longer T1. In fact, by using γ-Glu-[1-13C]Gly-d2 as a DNP probe, we achieved longer retention of the hyperpolarized signal at 1.4 T.

Dynamic Nuclear Polarization with Vanadium(IV) Metal Centers

Summary Dynamic nuclear polarization (DNP) harnesses the large polarization of electron spins to dramatically increase nuclear magnetic resonance (NMR) sensitivity. This study expands the scope of DNP beyond its traditional focus on hyperpolarizing the solvent network using exogenous polarizing agents (PAs). We introduce 1H DNP with endogenous V4+ centers positioned in a set of vanadyl complexes with tunable V4+-1H distances. We traced the polarization transfer from V4+ to 1H spins, specifically differentiating between direct V4+-1Hs polarization transfer and the 1H spin-diffusion-mediated bulk solvent 1H polarization buildup and illuminated the effect of the V4+-1H distance on these processes. These results deepen our understanding of polarization pathways and expand the catalog of PAs to broad-line transition metals. This study establishes crucial first steps toward employing strategically positioned endogenous paramagnetic metal centers for DNP and the conceptual framework of hyperfine DNP spectroscopy that merges both spatial and chemical diagnosis of target nuclear spins.

In Situ Detection of Endogenous HIV Activation by Dynamic Nuclear Polarization NMR and Flow Cytometry.

We demonstrate for the first time in-cell dynamic nuclear polarization (DNP) in conjunction with flow cytometry sorting to address the cellular heterogeneity of in-cell samples. Utilizing a green fluorescent protein (GFP) reporter of HIV reactivation, we correlate increased 15N resonance intensity with cytokine-driven HIV reactivation in a human cell line model of HIV latency. As few as 10% GFP+ cells could be detected by DNP nuclear magnetic resonance (NMR). The inclusion of flow cytometric sorting of GFP+ cells prior to analysis by DNP-NMR further boosted signal detection through increased cellular homogeneity with respect to GFP expression. As few as 3.6 million 15N-labeled GFP+ cells could be readily detected with DNP-NMR. Importantly, cell sorting allowed for the comparison of cytokine-treated GFP+ and GFP− cells in a batch-consistent way. This provides an avenue for normalizing NMR spectral contributions from background cellular processes following treatment with cellular modulators. We also demonstrate the remarkable stability of AMUPol (a nitroxide biradical) in Jurkat T cells and achieved in-cell enhancements of 46 with 10 mM AMUPol, providing an excellent model system for further in-cell DNP-NMR studies. This represents an important contribution to improving in-cell methods for the study of endogenously expressed proteins by DNP-NMR.

Stable isotope resolved metabolomics classification of prostate cancer cells using hyperpolarized NMR data

Metabolic fingerprinting is a strong tool for characterization of biological phenotypes. Classification with machine learning is a critical component in the discrimination of molecular determinants. Cellular activity can be traced using stable isotope labelling of metabolites from which information on cellular pathways may be obtained. Nuclear magnetic resonance (NMR) spectroscopy is, due to its ability to trace labelling in specific atom positions, a method of choice for such metabolic activity measurements. In this study, we used hyperpolarization in the form of dissolution Dynamic Nuclear Polarization (dDNP) NMR to measure signal enhanced isotope labelled metabolites reporting on pathway activity from four different prostate cancer cell lines. The spectra have a high signal-to-noise, with less than 30 signals reporting on 10 metabolic reactions. This allows easy extraction and straightforward interpretation of spectral data. Four metabolite signals selected using a Random Forest algorithm allowed a classification with Support Vector Machines between aggressive and indolent cancer cells with 96.9% accuracy, -corresponding to 31 out of 32 samples. This demonstrates that the information contained in the few features measured with dDNP NMR, is sufficient and robust for performing binary classification based on the metabolic activity of cultured prostate cancer cells.

Partial Oxidation-Induced Electrical Conductivity and Paramagnetism in a Ni(II) Tetraaza[14]annulene-Linked Metal Organic Framework.

We report the synthesis and characterization of a two-dimensional (2D) conjugated Ni(II) tetraaza[14]annulene-linked metal organic framework (NiTAA-MOF) where NiTAA is a macrocyclic MN4 (M = metal, N = nitrogen) compound. The structure of NiTAA-MOF was elucidated by Fourier-transform infrared, X-ray photoemission, and X-ray diffraction spectroscopies, in combination with density functional theory (DFT) calculations. When chemically oxidized by iodine, the insulating bulk NiTAA-MOF (σ < 10-10 S/cm) exhibits an electrical conductivity of 0.01 S/cm at 300 K, demonstrating the vital role of ligand oxidation in the electrical conductivity of 2D MOFs. Magnetization measurements show that iodine-doped NiTAA-MOF is paramagnetic with weak antiferromagnetic coupling due to the presence of organic radicals of oxidized ligands and high-spin Ni(II) sites of the missing-linker defects. In addition to providing further insights into the origin of the induced electrical conductivity in 2D MOFs, both pristine and iodine-doped NiTAA-MOF synthesized in this work could find potential applications in areas such as catalase mimics, catalysis, energy storage, and dynamic nuclear polarization-nuclear magnetic resonance (DNP-NMR).

Simulation Investigations and Optimization of a Millimeter-Wave Gyrotron for Its Tunability Using Magnetic and Thermal Tuning Schemes

The present gyrotron is designed to operate in $\text{TE}_{\text {7,2}}$ mode at 260 GHz for studying its beam–wave interaction behavior and its tunability for dynamic nuclear polarization/nuclear magnetic resonance (DNP/NMR) application. The operating frequency of the gyrotron is very sensitive to the physical dimension of the RF interaction circuit and its shape can be deformed due to the ohmic loss led temperature. Therefore, the combined magnetic and thermal tuning schemes are used to control the deformation and enhance the tunability of millimeter-wave gyrotron. The 3-D particle-in-cell simulation technique is used to study the beam–wave interaction behavior of gyrotron and validated with a multimode nonlinear code. Further, the structural deformation and thermal studies are made in a finite-element method based ANSYS. The use of combined magnetic tuning and water coolant based thermal tuning schemes have improved the tunable bandwidth of the present gyrotron to ∼1.88 GHz, which is ∼44.60% higher than the one obtained by varying the magnetic field only.

Organic Radical-Linked Covalent Triazine Framework with Paramagnetic Behavior.

The production of multifunctional pure organic materials that combine different sizes of pores and a large number of electron spins is highly desirable due to their potential applications as polarizers for dynamic nuclear polarization-nuclear magnetic resonance and as catalysts and magnetic separation media. Here, we report a polychlorotriphenylmethyl radical-linked covalent triazine framework (PTMR-CTF). Two different sizes of micropores were established by N2 sorption and the presence of unpaired electrons (carbon radicals) by electron spin resonance and superconducting quantum interference device-vibrating sample magnetometer analyses. Magnetization measurements demonstrate that this material exhibits spin-half paramagnetism with a spin concentration of ∼2.63 × 1023 spins/mol. We also determined the microscopic origin of the magnetic moments in PTMR-CTF by investigating its spin density and electronic structure using density functional theory calculations.

Endogenous dynamic nuclear polarization NMR of hydride-terminated silicon nanoparticles

Silicon nanoparticles (SiNPs) are intriguing materials and their properties fascinate the broader scientific community; they are also attractive to the biological and materials science sub-disciplines because of their established biological and environmental compatibility, as well as their far-reaching practical applications. While characterization of the particle nanostructure can be performed using 29Si solid-state nuclear magnetic resonance (NMR) spectroscopy, poor sensitivity due to low Boltzmann population and long acquisition times hinder in-depth studies of these potentially game-changing materials. In this study, we compare two dynamic nuclear polarization (DNP) NMR protocols to boost 29Si sensitivity in hydride-terminated SiNPs. First, we assess a traditional indirect DNP approach, where a nitroxide biradical (AMUPol or bCTbk) is incorporated into a glassing agent and transferred through protons (e− → 1H → 29Si) to enhance the silicon. In this mode, electron paramagnetic resonance (EPR) spectroscopy demonstrated that the hydride-terminated surface was highly reactive with the exogenous biradicals, thus decomposing the radicals within hours and resulting in an enhancement factor, ε, of 3 (TB = 15 s) for the 64 nm SiNP, revealing the surface components. Secondly, direct DNP NMR methods were used to enhance the silicon without the addition of an exogenous radical (i.e., use of dangling bonds as an endogenous radical source). With radical concentrations <1 mM, 29Si enhancements were obtained for the series of SiNPs ranging from 3 to 64 nm. The ability to use direct 29Si DNP transfer (e− → 29Si) shows promise for DNP studies of these inorganic nanomaterials (ε = 6 (TB = 79 min) for 64 nm SiNPs) with highly reactive surfaces, showing the sub-surface and core features. These preliminary findings lay a foundation for future endogenous radical development through tailoring the surface chemistry, targeting further sensitivity gains.

DNP NMR Studies of Crystalline Polymer Domains by Copolymerization with Nitroxide Radical Monomers

Dynamic nuclear polarization (DNP) nuclear magnetic resonance (NMR) spectroscopy is increasingly recognized as a powerful and versatile tool for the characterization of polymers and polymer-based materials. DNP requires the presence of unpaired electrons, usually mono- or biradicals, and the method of incorporation of these groups and their distribution within the structure is crucial. Methods for covalently binding the radicals to the polymer and controlling their location (e.g., exclusively within a specific phase or at an interface) can allow the selective enhancement of a particular region or the measurement of domain sizes. We have prepared a series of polyurethanes by copolymerization of a nitroxide radical monomer with poly(ethylene glycol) (PEO) and diisocyanate linkers. The PEO is shown to form crystalline domains with the radical monomers in a separate phase, providing DNP enhancements of around 10 and allowing the domain size and morphology to be probed with the aid of X-ray scattering data. Additionally, electron paramagnetic resonance is used to estimate the inter-radical distances and density functional theory calculations are used to refine the PEO crystal structure.

Recent progress in investigations of surface structure and properties of solid oxide materials with nuclear magnetic resonance spectroscopy

Solid oxide materials have widespread applications which are often associated with their surface structure and properties. Solid-state nuclear magnetic resonance (NMR) spectroscopy is one of the most powerful methods that give detailed local structural information of solid materials. Recent developments in dynamic nuclear polarization (DNP) NMR spectroscopy and 17O surface-selective isotopic labeling provide more opportunities in investigations of surface structure and properties of oxide materials. We describe in this review some of the latest progress in this field. DNP NMR can enhance the sensitivity of surface sites on the oxides by one to two order of magnitude, making very low concentrated species on the surface of oxides visible in NMR spectroscopy. On the basis of surface-selective 17O isotopic labeling, 17O NMR spectroscopy is now able to distinguish surface oxygen species on the different facets or different surface layers in oxide nanostructures. The nature of these facets can also be probed with help of 31P NMR spectroscopy along with phosphorous-containing probe molecules.

A quasi-optical and corrugated waveguide microwave transmission system for simultaneous dynamic nuclear polarization NMR on two separate 14.1 T spectrometers

Nuclear magnetic resonance (NMR) is an intrinsically insensitive technique, with Boltzmann distributions of nuclear spin states on the order of parts per million in conventional magnetic fields. To overcome this limitation, dynamic nuclear polarization (DNP) can be used to gain up to three orders of magnitude in signal enhancement, which can decrease experimental time by up to six orders of magnitude. In DNP experiments, nuclear spin polarization is enhanced by transferring the relatively larger electron polarization to NMR active nuclei via microwave irradiation. Here, we describe the design and performance of a quasi-optical system enabling the use of a single 395 GHz gyrotron microwave source to simultaneously perform DNP experiments on two different 14.1 T (1H 600 MHz) NMR spectrometers: one configured for magic angle spinning (MAS) solid state NMR; the other configured for solution state NMR experiments. In particular, we describe how the high power microwave beam is split, transmitted, and manipulated between the two spectrometers. A 13C enhancement of 128 is achieved via the cross effect for alanine, using the nitroxide biradical AMUPol, under MAS-DNP conditions at 110 K, while a 31P enhancement of 160 is achieved via the Overhauser effect for triphenylphosphine using the monoradical BDPA under solution NMR conditions at room temperature. The latter result is the first demonstration of Overhauser DNP in the solution state at a field of 14.1 T (1H 600 MHz). Moreover these results have been produced with large sample volumes (∼100 µL, i.e. 3 mm diameter NMR tubes).

Augmenting microwave irradiation in MAS DNP NMR samples at 263 GHz

The magnetic microwave field strength and its detailed spatial distribution in magic-angle spinning (MAS) nuclear magnetic resonance (NMR) probes capable of dynamic nuclear polarization (DNP) is investigated by numerical simulations with the objective to augment the magnetic microwave amplitude by structuring the sample in the mm and sub-mm range and by improving the coupling of the incident microwave beam to the sample. As it will be shown experimentally, both measures lead to an increase of the microwave efficiency in DNP MAS NMR.

Theoretical Study on the 1.185-THz Third Harmonic Gyrotron

We discuss how the existing University of Fukui (FIR UF) second harmonic double-beam gyrotron with the operating frequency 0.79 THz can be adopted for operation at the third harmonic. The new gyrotron will operate at the frequency 1.185 THz and will significantly increase the frequency of the dynamic nuclear polarization-nuclear magnetic resonance (DNP-NMR) spectrometer. This will allow one to study new bio-molecules.A special attention is payed to the mode competition between the operating $$ {TE}_{3,11}^{+} $$ mode at the third harmonic and the parasitic modes at the second and fundamental harmonics. The operating parameters of the modified gyrotron are U = 20 kV, α = 1.3, I = 0.35 A, and B = 14.60 T and the expected output power about $$ 100\mathrm{W} $$ .