Dynamic Light Scattering Measurements Research Articles

Synthesis of Thermoresponsive Chitosan-graft-Poly(N-isopropylacrylamide) Hybrid Copolymer and Its Complexation with DNA.

A hybrid synthetic-natural, thermoresponsive graft copolymer composed of poly(N-isopropyl acrylamide) (PNIPAM) side chains, prepared via RAFT polymerization, and a chitosan (Chit) polysaccharide backbone, was synthesized via radical addition-fragmentation reactions using the "grafting to" technique, in aqueous solution. ATR-FTIR, TGA, polyelectrolyte titrations and 1H NMR spectroscopy were employed in order to validate the Chit-g-PNIPAM copolymer chemical structure. Additionally, 1H NMR spectra and back conductometric titration were utilized to quantify the content of grafted PNIPAM side chains. The resulting graft copolymer contains dual functionality, namely both pH responsive free amino groups, with electrostatic complexation/coordination properties, and thermoresponsive PNIPAM side chains. Particle size measurements via dynamic light scattering (DLS) were used to study the thermoresponsive behavior of the Chit-g-PNIPAM copolymer. Thermal properties examined by TGA showed that, by the grafting modification with PNIPAM, the Chit structure became more thermally stable. The lower critical solution temperature (LCST) of the copolymer solution was determined by DLS measurements at 25-45 °C. Furthermore, dynamic and electrophoretic light scattering measurements demonstrated that the Chit-g-PNIPAM thermoresponsive copolymer is suitable of binding DNA molecules and forms nanosized polyplexes at different amino to phosphate groups ratios, with potential application as gene delivery systems.

Assessment of Tunable Resistive Pulse Sensing (TRPS) Technology for Particle Size Distribution in Vaccine Formulations - A Comparative Study with Dynamic Light Scattering.

A comparative assessment was performed to evaluate the potential of particle sizing by an ensemble based conventional dynamic light scattering (DLS) technique and an emerging technology based on tunable resistive pulse sensing (TRPS) using particle by particle approach by evaluating three different types of vaccine formulations representing three case studies and showing the limitation of each technique, instrument variability, sensitivity, and the resolution in mixed population. Three types of in-house vaccine formulations- a protein antigen, an outer membrane vesicle and viral particles were simultaneously evaluated by TRPS based Exoid and two DLS instruments-Zetatrac and Zetasizer for particle size distribution, aggregates, and resolution of polydisperse species. The data from first case study show the risk of possible size overestimation and size averaging in polydisperse samples in DLS measurements which can be addressed by the TRPS analysis. It also shows how TRPS may be utilized only to large size antigens due to its limited size range. The second case study highlights the difference in the sensitivities of two DLS instruments working on the same principle. The third case study show that how TRPS can better resolve the large aggregate species compare to DLS in polydisperse samples. This analysis shows that TRPS can be used as an orthogonal technique in addition to conventional DLS based methods for more precise and in-depth characterization. Both techniques are efficient in size characterization and produce comparable results, however the choice will depend on the type of formulation and size range to be evaluated.

Synergistic effects of β-NaFeO2 ferrite nanoparticles for photocatalytic degradation, antibacterial, and antioxidant applications.

Here, synthesis and thorough characterization of β-NaFeO2 nanoparticles utilizing a co-precipitation technique is presented. XRD analysis confirmed a hexagonal-phase structure of β-NaFeO2. SEM revealed well-dispersed spherical nanoparticles with an average diameter of 45 nm. The FTIR spectrum analysis revealed weak adsorption bands at 1054 cm-1 suggested metal-metal bond stretching (Fe-Na). UV-Visible spectroscopy indicates a 4.4 eV optical band gap. Colloidal stability of β-NaFeO2 was evidenced via Zeta potential (-28.5 mV) and Dynamic Light Scattering (DLS) measurements. BET analysis reveals a substantial 343.27 m2 g-1 surface area with mesoporous characteristics. Antioxidant analysis indicates efficacy comparable to standard antioxidants, while concentration-dependent antibacterial effects suggest enhanced efficacy against Gram-positive bacteria, particularly Streptococcus. The Photocatalytic activity of β-NaFeO2 showed significant pollutant degradation (>90% efficiency), with increased degradation rates at higher nanoparticle concentrations, indicating potential for environmental remediation applications.

Dual-Channel Imine-Amine Photoisomerization in a Benzoimidazole and Benzothiazole Coupled System: Photophysics and Applications.

A molecule, namely 2-(1H-benzo[d]imidazol-2-yl)-6-(benzo[d]thiazol-2-yl)-4-bromophenol (BIBTB), having a two-way proton transfer unit of thiazole and imidazole moieties was synthesized and characterized by NMR, electrospray ionization mass spectrometry (ESI-MS), and single-crystal diffraction studies. Steady state and time-resolved spectral studies of BIBTB support excited state intramolecular proton transfer (ESIPT), causing imine-amine tautomerization through a two-way 6-membered H-bonded ring, where the N atoms of benzothiazole and the benzoimidazole unit are involved as proton acceptor sites. Interestingly, in a nonpolar and moderately polar solvent, photoisomerization in BIBTB is found to be favored toward the thiazole ring, whereas in a highly polar solvent, it is favored toward the imidazole ring. A spectral comparison of BIBTB with judicially designed molecules 2-(benzo[d]thiazol-2-yl)-4-bromophenol (HBT) and 2-(1H-benzo[d]imidazol-2-yl)-4-bromophenol (BIB) supports these inferences. Theoretical calculation using the Density Functional Theory (DFT) at CAM-B3LYP/6-311+G(d,p) level supports the existence of two low-energy 6-membered hydrogen-bonded planar conformers in the ground state in the gas phase and in solvents of different dielectrics. The potential energy curves (PECs) calculated along the proton transfer (PT) coordinate are found to have a high energy barrier in the ground state and to be barrierless or have a low energy barrier in the excited state for both the forms. The calculated vertical excitation and the emission energy from the relaxed excited and PT states show good correlation with the experimental spectral data. Aggregation of BIBTB in water with red shifted emission was established from X-ray single-crystal structure analysis, solid state emission, and Dynamic Light Scattering (DLS) measurement. The molecule BIBTB also acts as a fluorescence probe for sensing the explosive picric acid in the subnano scale and can be used to determine the proportion of water in dimethyl sulfoxide (DMSO) solvent.

A dynamic light scattering inversion method based on regularization matrix reconstruction for flowing aerosol measurement.

Tikhonov regularization, or truncated singular value decomposition (TSVD), is usually used for dynamic light scattering (DLS) inversion of particles in suspension. The Tikhonov regularization method uses a regularization matrix to modify all singular values in the kernel matrix. The modification of large singular values cannot effectively reduce the variance of the estimated values but may introduce bias in the solution, resulting in poor disturbance resistance in the inversion results. The TSVD method, on the other hand, truncates all small singular values, which leads to the loss of particle size information during the inversion process. The shortcomings of the two methods mentioned above do not have a significant impact on the inversion of high signal-to-noise ratio data. However, compared to the classical DLS particle size inversion for non-flowing suspended particles, the DLS inversion of flowing aerosols is more significantly affected by noise, and the extraction of particle size information is more difficult due to the effect of flow velocity, resulting in worse inversion results with increasing aerosol flow velocity for both methods. To improve the accuracy of the particle size distribution (PSD) of flowing aerosols, we introduced a kernel matrix into the regularization matrix, and based on the principles of the two methods, the spectral information of the kernel matrix was utilized to make the modification of small singular values by the regularization matrix. Correspondingly, weak or no modification was made according to the values of large singular values to reduce the introduction of bias. The inversion results of simulated and measured data indicate that the reconstruction of the regularization matrix improves the anti-disturbance performance and avoids the loss of particle size information during the regularization inversion process, thereby significantly improving the PSD accuracy, which is affected by the dual effects of flow velocity and noise in the DLS measurement of flowing particles. The peak error and distribution error of the inversion results by reconstructing the regularization matrix are lower than those of Tikhonov regularization.

Potential of Ruthenium as a photosensitizer in radiation-activated Photodynamic Therapy (radioPDT)

In Photodynamic Therapy (PDT), light is used to activate photosensitizers (PS) to generate reactive oxygen species (ROS) as a cell-killing mechanism. However, PDT's application is limited to the surface and small size tumors because of the inefficiency of light in penetrating larger and deep-seated tumors. We have developed novel nanoparticles (NPs) that can be activated by radiation, a process known as the radiation-activated PDT (radioPDT). In our studies we developed a new variant of pegylated poly-lactic-co-glycolic (PEG-PLGA) encapsulated nanoscintillators (NSC) and ruthenium-based photosensitizer (Ru/rPDT) that exhibits minimal cell toxicity while having significant cell killing effect upon radiation activation. Our data suggest that radioPDT with Ru/rPDT can be a more effective strategy than previous protoporphyrin-based iterations in treating many deep-seated tumors.Introduction and Background: Toxicity and normal tissue damage are limiting factors for the application of radiotherapy (RT) where higher doses of radiation is required to cure deep-seated tumor such as prostate cancer. In Photodynamic Therapy (PDT), photosensitizers (PS) are activated by light to generate reactive oxygen species (ROS) to kill tumor cells. However, the main limitation of the current PDT is the limited tissue penetration of PS-activating light. Thus, PDT cannot be effectively used to treat deep-seated and larger size tumors. RT has higher tissue penetration depth, making the radiation-activated PDT (radioPDT) advantageous in treating deep seated tumors.We aim to develop novel radioPDT nanoparticles (NP) with more efficient anti-cancer therapeutic effect in vitro and in vivo to enhance targeted radiotherapy.Methods: LaF3:Ce3+ nanoscintillators (NSCs) were synthesized in a single step wet chemistry technique. The NSCs along with Ruthenium-based PS (Ru) with matching excitation/emission spectra were successfully encapsulated in PEG-PLGA. UV-Vis spectrometry and inductively coupled plasma mass spectrometry (ICP-MS) were used to confirm the presence of NSCs and Ru, and dynamic light scattering (DLS) and transmission electron microscopy (TEM) were used to determine the size of NP. Singlet oxygen generation was measured by Singlet Oxygen Sensor Green (SOSG) and direct singlet oxygen fluorescence. RadioPDT therapeutic potential was evaluated in PC3 prostate cancer cell under radiation by Alamar Blue cell viability assay.Results: UV-Vis spectrometry and ICP-MS determined the successful PEG-PLGA encapsulation of NSC and Ru. The TEM imaging confirmed the encapsulation NSC inside the nanocarrier PEG-PLGA. TEM and DLS measurements showed the size of radioNP ranged from 90nm to 150nm with polydispersity index of <0.3. Singlet oxygen generation by Ru/rPDT NPs was greater than PPIX based radioPDT (PPIX/rPDT) NPs. Furthermore, the direct measurement of singlet oxygen generation with fluorescence spectroscopy of Ru/rPDT showed preserved singlet oxygen yield and no evidence of quenching. The Ru/rPDT and PPIX/rPDT showed minimal PC3 cell cytotoxicity in dark conditions. The PC3 cell killing efficiency was comparable between Ru/rPDT and PPIX/rPDT either under light or radiation activation.Conclusion: Our in vitro studies show Ru/rPDT significantly increases anti-cancer therapeutic effect of RT, with minimal toxicity. Future studies will refine in vivo NP biodistribution, dosing, and RT dose/fractionation schemes.

Amphiphilic block copolymers of poly(N-vinyl pyrrolidone) and poly(isobornyl methacrylate). Synthesis, characterization and micellization behaviour in selective solvents

Block copolymers of N-vinyl pyrrolidone (NVP) and isobornyl methacrylate (IBMA), PIBMA-b-PNVP, were prepared employing the RAFT polymerization technique. IBMA was polymerized first followed by the polymerization of NVP in the presence of a suitable fluoroalcohol to accelerate the crossover reaction. The copolymers were characterized by Size Exclusion Chromatography (SEC) and NMR spectroscopy. The thermal stability of these copolymers was studied via Thermogravimetric Analysis (TGA) and Differential Thermogravimetry (DTG), showing unique characteristics compared to the respective PIBMA and PNVP homopolymers. The micellization behavior was studied in THF, which is a selective solvent for the PIBMA blocks. The corresponding statistical copolymers, PNVP-stat-PIBMA were also examined to elucidate the effect of the macromolecular architecture on the micellar properties. Furthermore, the self-assembly behavior in aqueous solutions was studied for the PIBMA-b-PNVP block copolymers. Water is a selective solvent for the PNVP blocks. Static (SLS) and dynamic light scattering (DLS) were employed to study the micellar assemblies. The encapsulation of the hydrophobic compound curcumin within the micellar core of the micellar structures in aqueous solutions was investigated by UV–Vis spectroscopy and DLS measurements.

Facile route for preparation of cuprous oxide/copper/cupric oxide nanoparticles by using simultaneous electrochemical and reduction reaction

Cuprous oxide/copper/cupric oxide nanoparticles were synthesized through a hybrid process involving anodic dissolution and a controlled redox reaction between NaOH and glucose in the solution. The study demonstrates the structural manipulation of the material by varying the reaction components within the solution. Morphology, structural analyses using SEM (Scanning Electron Microscope), EDX (Energy-dispersive X-ray spectroscopy), TEM (Transmission Electron Microscope), FTIR (Fourier Transform Infrared Spectroscopy), XRD (X-ray diffraction), and XPS (X-ray photoelectron spectroscopy) unveiled the tunability of the material's structure based on the reaction components. Nitrogen adsorption analysis employing the Brunauer-Emmett-Teller (BET) equation confirmed the material's porosity, while Dynamic Light Scattering (DLS) measurements provided insights into the materials' hydrodynamic size and zeta potential. The results demonstrated that by increasing the glucose/NaOH ratio during the reaction, the different structures and morphologies of the distinct products were obtained from the clustering of small nanoparticles to cubic shape and flower-like structure. Antibacterial activity tests conducted on various bacterial strains showed a correlation between the morphology and structure of the material and its antibacterial properties. The highest substantial antibacterial efficacy against all tested bacterial strains at a dosage of 100 μg/L was obtained for the samples with clustering morphology, whereas the remaining materials showed no discernible antibacterial effect against one of the studied bacteria. The results also demonstrated that the sample with a clustering structure exhibited superior antibacterial properties when dispersed in water containing dimethylsulfoxide.

Dynamic light scattering and laser speckle contrast imaging of the brain: theory of the spatial and temporal statistics of speckle pattern evolution.

Dynamic light scattering (DLS) and laser speckle contrast imaging (LSCI) are closely related techniques that exploit the statistics of speckle patterns, which can be utilized to measure cerebral blood flow (CBF). Conventionally, the temporal speckle intensity auto-correlation function is calculated in DLS, while the spatial speckle contrast Ks is calculated in LSCI measurements. Due to the rapid development of CMOS detection technology with increased camera frame rates while still maintaining a large number of pixels, the ensemble or spatial average of as well as the temporal contrast Kt can be easily calculated and utilized to quantify CBF. Although many models have been established, a proper summary is still lacking to fully characterize DLS and LSCI measurements for spatial and temporal statistics, laser coherence properties, various motion types, etc. As a result, there are many instances where theoretical models are misused. For instance, mathematical formulas derived in the diffusive regime or for ergodic systems are sometimes applied to small animal brain measurements, e.g., mice brains, where the assumptions are not valid. Therefore, we aim to provide a review of the speckle theory for both DLS and LSCI measurements with detailed derivations from first principles, taking into account non-ergodicity, spatial and temporal statistics of speckles, scatterer motion types, and laser coherence properties. From these calculations, we elaborate on the differences between spatial and temporal averaging for DLS and LSCI measurements that are typically ignored but can result in inaccurate measurements of blood flow, particularly the spatially varying nature of the static component in and Kt. We also obtained maps in in vivo mouse brain measurements using high frame rate CMOS cameras which have not been demonstrated before, and compared with and Ks,t. This work provides a useful guide for choosing the correct model to analyze spatial and temporal speckle statistics in in-vivo DLS and LSCI measurements.

Study on preparation, structure, and cooling properties of TiO2/acrylonitrile–styrene–acrylate terpolymer solar reflective nanocomposite

AbstractPreparation, characterization, and cooling properties of TiO2 /acrylonitrile–styrene‐acrylate (ASA) terpolymer solar reflective nanocomposites with various contents of titanium dioxide (TiO2) nanoparticles were investigated. The formation of nanocomposites was monitored by Fourier transform infrared spectroscopy (FTIR), dynamic light scattering (DLS), transmission electron microscopy (TEM), scanning electron microscopy (SEM), and contact angle measurements. The cooling features were characterized via ultraviolet–visible–near infrared (UV–vis–NIR) spectrophotometry and heat build‐up tests. FTIR spectra show the disappearance of the vinylic absorption peak at 1636 cm−1 of the modified TiO2 which signifies good chemical interaction between the poly (butyl acrylate) chains and the nanoparticles. DLS measurements revealed relative enlargement in the diameter of nanocomposite latex particles from 107 to 184 nm as the percentage of mineral nanoparticles increased. SEM and TEM analysis revealed the formation of a core‐shell morphology with an almost uniform distribution of nanoparticles in the polymer chains. Spectral properties details obtained using UV–vis–NIR spectrophotometry revealed that surface modification of TiO2 nanoparticles resulted in a more than 7% increase in solar transmittance compared to the raw form. Nevertheless, grafting a thermoplastic shell onto the acrylic core reduced the average solar transmittance from 81.92% to 55.32%. Incorporating TiO2 nanoparticles (up to 6 wt%) into the polymer matrix led to an 18.44% further decrease in solar transmittance compared to the neat ASA. Heat build‐up tests showed enhanced cooling of 10.2, 12.7°C, 13.4°C, and 14.2°C for 0, 2, 4, and 6 wt% of used nanoparticles, respectively.Highlights In situ nanocomposites were synthesized through mini‐emulsion polymerization. Chemical bonding formed between functionalized TiO2 and polymeric matrix. ASA/TiO2 nanocomposite shields &gt;56% of NIR light and 63% of solar light. Nanocomposites reduced heat build‐up temperature by more than 14°C during indoor test.

Removal of bromophenol blue from polluted water using a novel azo-functionalized magnetic nano-adsorbent.

Water pollution from organic dyes poses a serious danger to the environment. In the present work, we report a novel adsorbent (ADFS) based on azo-dye-functionalized superparamagnetic iron oxide nanoparticles (SPIONs) for the removal of the anionic dye bromophenol blue (BPB) from contaminated water. The fabricated SPIONs, azo dye, and ADFS adsorbent were characterized with FTIR and UV-vis absorption spectroscopy, 1HNMR spectroscopy, mass spectrometry, SEM imaging, dynamic light scattering (DLS), zeta potential measurements, vibrating sample magnetometry, thermogravimetric analysis, differential thermal analysis, and X-ray diffraction analysis. DLS measurements showed a particle size of 46.1 and 176.5 nm for the SPIONs and the ADFS, respectively. The adsorbent exhibited an adsorption capacity of 7.43 mg g-1 and followed the pseudo-second-order kinetics model (r2 = 0.9981). The ADFS could efficiently remove BPB from water after stirring for 120 minutes at room temperature and pH 2. The adsorption process was proved to occur via physisorption, as revealed by the Freundlich isotherm (n = 1.82 and KF = 11.5). Thermodynamic studies implied that the adsorption is spontaneous (-8.03 ≤ ΔG ≤ -0.58 kJ mol-1) and enthalpy-driven might take place via van der Waals interactions and/or hydrogen bonding (ΔH = -82.19 kJ mol-1 and ΔS = -0.24 kJ mol-1 K-1).

Isolation of TiNbN wear particles from a coated metal-on-metal bearing: Morphological characterization and in vitro evaluation of cytotoxicity in human osteoblasts.

To improve the wear resistance of articulating metallic joint endoprostheses, the surfaces can be coated with titanium niobium nitride (TiNbN). Under poor tribological conditions or malalignment, wear can occur on these implant surfaces in situ. This study investigated the biological response of human osteoblasts to wear particles generated from TiNbN-coated hip implants. Abrasive particles were generated in a hip simulator according to ISO 14242-1/-2 and extracted with Proteinase K. Particle characteristics were evaluated by electron microscopy and energy dispersive x-ray spectroscopy (EDS), inductively coupled plasma mass spectrometry (ICP-MS) and dynamic light scattering (DLS) measurements. Human osteoblasts were exposed to different particle dilutions (1:20, 1:50, and 1:100), and cell viability and gene expression levels of osteogenic markers and inflammatory mediators were analyzed after 4 and 7 days. Using ICP-MS, EDS, and DLS measurements, ~70% of the particles were identified as TiNbN, ranging from 39 to 94 nm. The particles exhibited a flat and subangular morphology. Exposure to particles did not influence cell viability and osteoblastic differentiation capacity. Protein levels of collagen type 1, osteoprotegerin, and receptor activator of nuclear factor κB ligand were almost unaffected. Moreover, the pro-inflammatory response via interleukins 6 and 8 was minor induced after particle contact. A high number of TiNbN wear particles only slightly affected osteoblasts' differentiation ability and inflammatory response compared to metallic particles. Nevertheless, further studies should investigate the role of these particles in peri-implant bone tissue, especially concerning other cell types.

Low intensity photon driven sheet breaking of reduced graphene oxide for amplified light transmission and dust repellent coating

Graphene has been rightly called the wonderous 2D material owing to its several unique properties. Despite continuous research efforts on the development of reduced graphene oxide (rGO), its optical properties remain largely unexplored. Herein we have explored the light irradiation effects on the optical and structural properties of rGO. Crystalline natured rGO was prepared by simple microwave exfoliation and ultra-sonication technique. Furthermore, rGO of hydrophobic (pho-rGO) and hydrophilic (phi-rGO) nature were derived from the same source. Transmission Electron Microscopy (TEM) and Dynamic Light Scattering (DLS) measurements revealed a reduction in the sheet size of phi-rGO upon light irradiation. Moreover, an increment in the light transmission was also observed in the light treated phi-rGO, which was verified for solar cell application. On the other hand, pho-rGO was used in creating a dust-repellent coating on glass surface without impacting light transmission.

New Quaternary Ammonium Derivatives Based on Citrus Pectin.

New citrus pectin derivatives carrying pendant N,N-dimethyl-N-alkyl-N-(2-hydroxy propyl) ammonium chloride groups were achieved via polysaccharide derivatization with a mixture of N,N-dimethyl-N-alkyl amine (alkyl = ethyl, butyl, benzyl, octyl, dodecyl) and epichlorohydrin in aqueous solution. The structural characteristics of the polymers were examined via elemental analysis, conductometric titration, Fourier Transform Infrared spectroscopy (FTIR) and 1D (1H and 13C) nuclear magnetic resonance (NMR). Capillary viscosity measurements allowed for the study of viscometric behavior as well as the determination of viscosity-average molar mass for pristine polysaccharide and intrinsic viscosity ([η]) values for pectin and its derivatives. Dynamic light scattering measurements (DLS) showed that pectin-based polymers formed aggregates in aqueous solution with a unimodal distribution. Critical aggregation concentration (cac) for the hydrophobic pectin derivatives were determined using fluorescence spectroscopy. Atom force microscopy (AFM) images allowed for the investigation of the morphology of polymeric populations obtained in aqueous solution, consisting of flocs and aggregates for crude pectin and its hydrophilic derivatives and well-organized aggregates for lipophilic pectin derivatives. Antimicrobial activity, examined using the disc diffusion method, proved that all polymers were active against Staphylococcus aureus bacterium and Candida albicans yeast.

3D printed cell for the in situ dynamic light scattering monitoring of nanoparticle size distribution in microfluidics

Microfluidic systems offer a reproducible approach for material synthesis at microliter quantities. Automatization of such systems requires development of new approaches for insitu diagnostics, which can provide feedback for the optimization algorithms. The knowledge about size distribution at different reaction stages is of key importance for the nanoparticle synthesis, but most laboratory devices are designed to work with batch systems. In this work we have designed 3d printed devices for dynamic light scattering (DLS) characterization. The combination of backscatter DLS module and microfluidic chips enables insitu monitoring of ultra-low (down to nanoliters) volumes of sample solution even at high concentration. We report several types of microfluidic chips compatible with the commercially available systems with analyzer fiber probe for the measurements in flow and static regimes. The latter option does not contribute with the flow speed to the Brownian motion of nanoparticles and thus does not affect the calculated particle size distribution. 3d-printed cell for DLS measurements on the one hand, probes small sample volume, on the other, enables cheap insitu hydrodynamic size determination. The application of developed instruments is demonstrated for Tb-doped GdF3 nanoparticles, tween micelles, and gold nanoparticles.

Design of a novel nanoparticle to use X-ray fluorescence of TiO2 to induce photodynamic effects in the presence of PpIX

BackgroundRadiotherapy and photodynamic therapy are the methods of cancer treatment. Although one limitation of photodynamic therapy (PDT) is the limited penetration depth of light through tissue, using X-rays does not have this restriction. Self-lighting nanoparticles can convert X-rays into UV/visible. This study focuses on a newly designed nanostructure containing mesoporous silica nanoparticles (MSN), titanium dioxide nanoparticles (TiO2, anatase grade), and protoporphyrin IX (PpIX) as a photosensitizer to overcome the limitations of photodynamic therapy. MethodsAfter the synthesis and characterization of Ti-MSN/PpIX@PVP nanostructure, two ROSes (OH* and 1O2) were measured when the nanostructures were irradiated with 100 kV and 6 MV photons. The toxicity of Ti-MSN/PpIX@PVP nanostructure in presence and absence of radiation was investigated on DFW and HT-29 cell lines. The in-vitro experiments were analyzed using the MTT assay and colony count assay. Finally, the effect of light exposure in the presence of Ti-MSN/PpIX@PVP nanostructure on the two cell lines was studied. The in-vitro studies were evaluated using the Synergism Index (Syn) and Dose Enhancement Factor (DEF). ResultsBased on the FESEM (field emission scanning electron Microscopy) images and DLS (dynamic light scattering) measurements, the size of Ti-MSN/PpIX nanostructure was determined as (35.2 nm) and (168.4 nm), respectively. Based on the spectrofluorimetry results, 100 kV photons produced more ROSes than 6 MV photons. The results of MTT assay and colony formation for X-PDT show Syn >1, except for 100 kV photons for HT-29 cell line. The nanostructure also reduced colony formation induced by X-PDT more effectively when irradiated by 100 kV photons on DFW cells. The results obtained from conventional PDT showed that the ED 50 of the HT-29 cell line was 6 times higher than that of the DFW cell line. ConclusionDesigning and synthesizing Ti-MSN/PpIX@PVP nanostructures offer a promising strategy for reducing the current challenges in PDT and for developing and advancing X-PDT as an innovative cancer treatment technique.

Thermo- and pH-responsive targeted lipid-coated mesoporous nano silica platform for dual delivery of paclitaxel and gemcitabine to overcome HER2-positive breast cancer

In the current study, a new monoclonal antibody conjugated dual stimuli lipid-coated mesoporous silica nanoparticles (L-MSNs) platform was developed and investigated for specific co-delivery of the paclitaxel (PTX) and gemcitabine (Gem) to cancer cells and preventing their side effects during the treatment process. First, MSNs were synthesized and then coated with as-prepared pH-, and thermo-sensitive niosomes to produce L-MSNs. For this aim, Dipalmitoylphosphatidylcholine (DPPC) was used to create thermo-sensitivity, and 1, 2-Distearoyl-sn-glycerol-3-phosphoethanolamine -Citraconic Anhydride-Polyethylene Glycol (DSPE-CA-PEG) polymers were prepared and incorporated to the lipid layer for creation of pH-sensitivity. In the next step, trastuzumab as a monoclonal antibody (mAb) was conjugated to the maleimide groups of the 1, 2-Distearoyl-sn-glycerol-3-phosphoethanolamine DSPE-polyethylene glycol (PEG)-maleimide agents in the lipid bilayer via a disulfide bond. Dynamic light scattering (DLS) and zeta potential measurements, Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET), and scanning electron microscopy (SEM) analyses were utilized to characterize the synthesized particles before and after surface modification. The encapsulation efficiency (EE%) and loading efficiency (LE%) of the particles were also evaluated. Additionally, the drug release study and MTT assay were done to evaluate the bioactivity potential of the fabricated platforms. The results of DLS and zeta potential measurements revealed an average size of 200 nm and a neutral zeta potential of about −1 mV for mAb-L-MSNs. Also, the FTIR spectra confirmed the formation of mAb-L-MSNs. Moreover, SEM analysis showed spherical-shaped MSNs with amorphous structure confirmed by XRD analysis, and BET test revealed ∼ 820 m2/g specific surface area and pore about 5 nm in size. The values of EE% and LE% of PTX were 90.3 % and 26.7 %, while these values for GEM were 89.5 % and 38.8 % in the co-loaded form, respectively. The thermo-pH-sensitivity examination showed approximately 500 nm of size increase after the change of pH and temperature from 7.4 and 37˚C to 5 and 42˚C. The release profile showed a pH-, and thermo-dependence manner, which led to about 89 % and 95 % of PTX and GEM released from the co-loaded platform at a pH of 5 and 42 °C while these values were 31.1 % and 32.2 % at pH of 7.4 and 37˚C, respectively. MTT assay data presented that when the mAb-L-co-loaded-MSNs platform containing 250 µg/mL drug was used, about 92 % of cells died in human epidermal receptors (HER2)-positive breast cancer cells (SKBR3), while just about 4 % of HER2-negative normal cells were killed. However, the growth inhibition rate of SKBR3 cells was caused by empty-mAb-L-MSNs, pure PTX and GEM combination were 9 % and 87 %, respectively. Moreover, the half inhibitory concentration (IC50) of the pure PTX, pure GEM, and mAb-coloaded-L-MSNs were 33, 17.6, and 6.5 µg/mL. The synergic effect of co-encapsulation of PTX and GEM in addition to trastuzumab conjugated L-MSNs was confirmed by a combinational index (CI) of 0.34. Therefore, this strategy leads to specific targeted drug delivery to cancer cells using a key-lock interaction between the trastuzumab and HER-2 receptors on the cancer cell membrane which stimuli the endocytosis of the particles to the cells followed by the destruction of the lipid layer in the acidic pH and the temperature of the lysosome, leading to enhanced release of PTX and GEM (pH of 5 and 42˚C). So, this platform can be considered a suitable carrier for cancer treatment.

Interactions between gold nanoparticles with different morphologies and human serum albumin

Introduction: Three different shapes of gold nanoparticles were synthesized in this experiment. At the same time, studies compared their effects with human serum albumin (HSA).Methods: Gold nanoparticles (AuNPs) with three different morphologies, such as, nanospheres (AuNSs), nanorods (AuNRs), and nanoflowers (AuNFs) were synthesized via a seeding method and their characteristic absorption peaks were detected using ultraviolet-visible (UV-vis) absorption spectroscopy, Telectron microscopy (TEM), Dynamic Light Scattering (DLS) and Zeta potential measurements, circular dichroism (CD), and Fourier transform infrared spectroscopy (FTIR) to study the interactions between them and HSA. By comparing the thermodynamic parameters and quenching mechanism of the three materials, similarities and differences were determined in their interactions with HSA.Results: The results showed that with an increase in the concentration of the AuNPs with the three different morphologies, the UV-vis absorption peak intensity of the mixed solution increased, but its fluorescence intensity was quenched. This indicates that the three types of AuNPs interact with HSA, and that the interactions between them represent a static quenching process, which is consistent with the conclusions derived from three-dimensional fluorescence experiments. Through variable-temperature fluorescence experiments, the binding constants, number of binding sites, and thermodynamic parameters of the interactions between the three types of AuNPs and HSA were determined. The Gibbs free energy changes were &amp;lt;0, indicating that the reactions of the three types of AuNPs with HSA are spontaneous, resulting in associated matter. Binding constant measurements indicated that the strongest binding took place between the AuNFs and HSA. In addition, the results of fluorescence, CD spectroscopy, and FTIR showed that three different shapes of AuNPs can induce conformational changes in HSA and reduce the α-helix content. Among them, AuNFs have the smallest ability to induce conformational changes.Discussion: According to studies, AuNFs interact more favorably with HSA. This can be used as a reference for the administration of drugs containing AuNPs.

New design of microchip for in-situ DLS measurement of colloidal suspensions

Stability of dispersed materials remains an important question in a wide variety of fields such as cosmetics, catalysis, food or energy and the environment. As stability is directly linked to the size of the dispersed colloids it is essential to assess the size distribution of colloidal suspensions. Nowadays, microfluidic-based approaches generate increasing interest as they represent flexible and fast measurements allowing high throughput experimentations. However, characterization of colloidal dispersions is usually performed by dynamic light scattering (DLS), that requires static measurements as well as significant volumes, that are not compatible with on-line analysis and microfluidics. Moreover, due to flow-induced decorrelation terms, DLS measurements in microfluidic channels are only accurate at very low shear rates. This work aimed at developing an on-line microfluidic device for dispersed materials characterization using DLS. The main challenges of this project were i) to adapt the microfabrication of the PDMS device in order to combine microchannels of hundreds of microns with a milli-fluidic cavity to perform the DLS measurements, and ii) to downsize the DLS set up. A PDMS microchip, consisting in a millimeter cavity for DLS measurements in parallel with a microchannel, was designed to perform the measurement on the sample without stopping the suspension flow during the microfluidic experiment. The cavity geometry was then optimized thanks to numerical simulation to ensure a good sweep efficiency and to downscale as much as possible without impairing the DLS signal. By adapting the microfabrication process, a PDMS microfluidic chip was designed allowing the size measurements of successive suspensions containing 100 and 12 ​nm diameter particles. This work is a first step towards the implementation of a new technological building block for online microfluidic characterization. © 2017 Elsevier Inc. All rights reserved.

Investigating the effect of atmospheric plasma on protein fibrinogen: Spectroscopic and biophysical analysis

AbstractCold atmospheric plasma (CAP) has gained significance in recent years and different prospects of it have been studied widely owing to its effectiveness and eco‐friendly nature. CAP has been used extensively in wound healing. However, a detailed understanding of the interaction of the CAP with different protein macromolecules present in our body is essential. In this study, we emphasize how CAP affects the protein fibrinogen. Fibrinogen is a major protein involved in blood clotting and the major protein in the blood. Numerous spectroscopic investigations have been done including UV spectroscopy, fluorescence spectroscopy, dynamic light scattering (DLS), and Zeta. This work shines a light on protein self‐assembly to bring the future possibilities of bio‐medicine with CAP treatment. Fibrinogen undergoes structural changes around tryptophan residue as evidenced by UV spectroscopy and quenching in fluorescence spectroscopy. The order of the fluorescence quenching is Oxygen &gt; Helium &gt; Argon gas plasma. 2,4‐dinitrophenylhydrazine (DNPH) assay supports fluorescence studies as more protein carbonyls are formed in the case of argon and oxygen gas plasma. DLS and Zeta potential measurements prove that the protein Fibrinogen undergoes a self‐assembly process to form organized assemblies in the presence of a plasma jet. Reactive oxygen and reactive nitrogen species produced in the plasma have been evaluated using various assays and correlated with the other studies. This study will help understand protein fibrinogen's self‐assembly process and pave the way for the CAP application in wound healing.