Fabrication Of Dye-sensitized Solar Cells Research Articles

Fabrication of dye-sensitized solar cells with natural dye pigments derived from mustard green (Brassica juncea L) and turmeric (Curcuma longa L)

Abstract Natural dye molecules are good alternatives for the ruthenium-based sensitizer for use in dye-sensitized solar cell (DSSC) application. In this research, we have reported the potential application of natural pigment extracts as a dye-sensitizer in DSSC. Natural dyes were extracted using simple maceration technique from natural sources such as mustard green (Brassica juncea L) and turmeric (Curcuma longa L). UV-Vis and FT-IR characterization were employed to examined the optical characteristics and identify their functional groups of the dyes, respectively. The UV-Vis characterization of mustard green dye and turmeric dye show a wide absorption in visible region. The FT-IR spectrum of mustard green dye and turmeric dye show the presence the anchoring groups. The DSSC’s performance was studied using current-voltage (I-V) measurements and electrochemical impedance spectroscopy (EIS). It was observed that the DSSC with turmeric dye shows better photovoltaic performance than DSSC with mustard green dye correlated to its longer charge carrier lifetime.

Enhancing Efficiency of Dye-Sensitized Solar Cell using Mn or Ce Doped and Co-doped ZnO Photoanodes with Lawsonia Inermis Natural Dye

Abstract In the present research paper, Mn (transition metal) and Ce (rare earth metal) doped and co-doped ZnO nanoparticles were synthesized using a cost-effective sol-gel technique. As synthesized samples were characterized using X-ray diffraction and field emission scanning electron microscope to examine the structure and morphology respectively. The optical properties were examined by UV-Visible and photoluminescence spectroscopic techniques. The synthesized samples were used as photoanode for the fabrication of dye-sensitized solar cell (DSSC). The utilization of a photoanode, containing Mn and Ce doped and co-doped in ZnO, in DSSC leads to a significant enhancement in photovoltaic conversion efficiency with natural dye lawsonia inermis. Different combinations of Mn or Ce doped and co-doped ZnO nanoparticles were used for testing their effectiveness as photoanode in DSSC. It was observed that the efficiency for Mn and Ce co-doped ZnO photoanode-based DSSC was found to be 0.2118%, which is approximately a 750% increase as compared to bare ZnO photoanode based DSSC. The enhancement in the efficiency of DSSCs was due to the formation of a blocking layer by Mn ions which helps to stop the flow of electrons backward and the broadening of the spectrum region with the help of Ce ions using up/down conversion process also helps to achieve higher efficiency. This enhancement in the efficiency of DSSC may be attributed to the synergic effect of Mn and Ce.

Dye-Sensitized Solar Cells Characterization of Kitolod Leaves (Hippobroma longifora)

Energy from fossil fuels is decreasing day by day and also causes many environmental problems. In the current era, many environmentally friendly renewable energy sources have been developed, such as the development of DSSC (Dye Sensitized Solar Cells). DSSC is a technology that utilizes colored materials sourced from nature which are used as absorbers of sunlight energy to be converted into electrical energy. In this research, the synthesis and characterization of organic material from kitolod leaves as DSSC will be carried out. Kitolod leaves (Hippobroma longifora) are wild plants that usually grow in home gardens and rice fields. Kitolod leaves which have chlorophyll can support the absorption of sunlight if applied as a sensitizer in DSSC. The methods that will be used in this research are making TiO2 paste, dye solution preparation, electrolyte solution preparation, DSSC fabrication, testing and characterization. The tests that will be carried out are testing the TiO2 layer, dye absorption, and electric current. Meanwhile, the characterization that will be carried out is dye absorption using UV-Vis, and electric current using a potentiometer. From the results of light absorption shows that when the wavelength is 500 nm or the green light spectrum, the maximum light absorption by the chlorophyll of kitolod leaves is 1.78 (a.u.). The maximum voltage (Vm) and maximum current (Im) in daylight lamps have greater values ​​compared to warm white lamps. The highest efficiency of the solar light source is shown when the air mass is 1.5 (08.30-08.40). The time of DSSC immersion in dye also influences the resulting of Vm and Im values ​​which can be shown in that the Vm and Im values ​​of DSSC 2 (30 minutes) are greater than those of DSSC 1 (10 minutes). The results of open circuit voltage (Voc) and the short circuit current (Isc) in this research still need to be improved to produce better efficiency.

Comparative characterizations of plant and mineral dye as potential photosensitizer in Dye-Sensitized Solar Cell

The advent of dye-sensitized solar cells (DSSC) has expansively seen more studies as an alternative to silicon-based and thin-film solar cells due to their simple structure and relatively low production cost. In dye-sensitized solar cells, the dye is one of the major components for high power conversion efficiencies. The extracted dyes were characterized by powder x-ray diffraction, x-ray fluorescence, Scanning electron microscopy, UV-visible spectroscopy, and Gas Chromatography-Mass spectrometry analysis. The structure of the mineral dye contains constituents that enhance better absorption of solar radiation for use in a Dye-Sensitized Solar Cell (DSSC). The calcium and iron content of the mineral dye studied as revealed by the mineralogical analysis done using the powder x-ray diffraction (XRD) and the x-ray fluorescence (XRF) suggest this. These metals serve as bounding complexes to other organic components in the dye, like in the case of Ruthenium complexes dye for efficient absorption of solar radiation, especially in the visible light region. The functional groups present in the dye also confirm what favors good absorption of solar radiation for DSSC application. The Organic chemical compositions present in the mineral dye which were obtained by the Gas Chromatography-Mass spectrometry analysis also confirm the functional groups of carbonyl, Amine, and hydroxyl revealed by FTIR, which were responsible for solar radiation absorption. There are strong absorption narrow bands in the visible region with peaks at around 424 nm (2.903 a.u) and 486 nm (2.973 a.u). Optical band gaps of 1.66 eV and 2.27 eV for the mineral dye and plant dye respectively, were obtained. The properties of the dyes studied give potential substitutes to the relatively expensive ruthenium-based dyes for use in DSSC fabrication.

Fabrication of a New Dye-Sensitized Solar Cell Using CuO/TiO2 Nanocomposite Synthesized via an Electrochemical Technique

Various standard methods have previously been used for the synthesis of nanoparticles that produce unhealthy waste. They are also considered unsafe and expensive methods. An alternative technology is needed to synthesize nanoparticles that consume less energy and are more environmentally friendly. In this research, a CuO/TiO2 nanocomposite has been synthesized with a mole ratio of 1.5:1, which produces good energy and no environmental pollution using an easy and fast method (electrochemical). The morphology and structure of the nanocomposite were examined using TEM, FESEM, AFM, and FTIR. The particle size of the CuO/TiO2 nanocomposites was found to range between 10.52 and 88.10 nm, while optical properties were diagnosed using UV-visible spectroscopy since its measurements showed the amount of gap energy (3.08 eV). The structure of the nanocomposite was demonstrated using X-ray diffraction (XRD), where the mixed anatase and rutile phases were observed for TiO2, while the monoclinic (tenorite) phase was observed for CuO. Additionally, dye-sensitized solar cells (DSSCs) have been fabricated from CuO/TiO2 nanocomposite, which was synthesized by a new green method, and pigments (methylene blue as a chemical dye and chlorophyll as a natural dye). These DSSCs were characterized by their high ability to absorb ultraviolet energy, where the efficiency of energy conversion ɳ of ITO-CuO/TiO2 was approximately 2.62 and 3.87% with chlorophyll (a natural dye) and methylene blue (a chemical dye), respectively, where ɳ of ITO-CuO/TiO2 with methylene blue is the best.

Spinel cobalt-based binary metal oxides as emerging materials for energy harvesting devices: synthesis, characterization and synchrotron radiation-enabled investigation.

The synthesis and characterization of spinel cobalt-based metal oxides (MCo2O4) with varying 3d-transition metal ions (Ni, Fe, Cu, and Zn) were explored using a hydrothermal process (140 °C for two hours) to be used as alternative counter electrodes for Pt-free dye-sensitized solar cells (DSSCs). Scanning electron microscopy (SEM) and atomic force microscopy (AFM) revealed distinct morphologies for each metal oxide, such as NiCo2O4 nanosheets, Cu Co2O4 nanoleaves, Fe Co2O4 diamond-like, and Zn Co2O4 hexagonal-like structures. The X-ray diffraction analysis confirmed the cubic spinel structure for the prepared MCo2O4 films. The functional groups of MCo2O4 materials were recognized in metal oxides throughout Fourier transform infrared (FTIR) analysis. The local structure analysis using X-ray absorption fine structure (XAFS) at Fe and Co K-edge identified octahedral (Oh) Co3+ and tetrahedral (Td) Co2+ coordination, with Zn2+ and Cu2+ favoring Td sites, while Ni3+ and Fe3+ preferred Oh active sites. Further investigations utilizing the Fourier transformation (FT) analysis showed comparable coordination numbers and interatomic distances ranked as Co-Cu > Co-Fe > Zn-Co > Co-Ni. Furthermore, the utilization of MCo2O4 thin films as counter electrodes in DSSC fabrication showed promising results. Notably, solar cells based on CuCo2O4 and ZnCo2O4 counter electrodes showed 1.9% and 1.13% power conversion efficiency, respectively. These findings indicate the potential of employing these binary metal oxides for efficient and cost-effective photovoltaic device production.

Rational design and elucidation of interfacial dynamics in PMMA/PVDF compatibilized blends through solution blending for stable quasi-solid-state dye-sensitized solar cells

In the photovoltaic market, the widespread adoption of traditional dye-sensitized solar cells (DSSCs) faces obstacles due to inherent stability challenges. The solution to these issues involves replacing liquid electrolytes with quasi-solid electrolytes. In this work, quasi-solid state electrolytes were synthesized by employing a polymer blend and inorganic salt. The polymeric blends, comprising polymethyl methacrylate (PMMA) and polyvinylidene fluoride (PVDF), were meticulously prepared through the solution blending technique. The investigation of blend compatibility, crystallinity, and stability involved analyses through differential scanning calorimetry (DSC), scanning electron microscopy (SEM), X-ray diffraction (XRD), and UV-degradation assessments, respectively. The findings indicated that the concentration of ingredients significantly influenced the compatibility, crystallinity, and stability of the blends. The compatibilized blend was employed in crafting polymer gel electrolytes (PEGs), demonstrating that both the concentration and type of salts significantly influence the ionic conductivity of PEGs. The highest conductivity, reaching 2 mS/cm, was achieved with a mixed salt concentration of 50w%/50w% (NH4I/KI). Subsequently, this electrolyte was incorporated into the fabrication of quasi-solid state DSSC. The results showed that the DSSC with PEG achieved 2.81 % efficiency, while the traditional DSSC had 4.11 % efficiency. Notably, after fifteen days, the efficiency of the traditional DSSC dropped to 0.20 %, while the PEG-based DSSC remained stable (2.58 %).

Fabrication of binder-free TiO2 P 25 films on flexible PET/ITO substrate for photoanode in dye-sensitized solar cells

In this work, TiO2 P 25 films for photoanode in dye-sensitized solar cells (DSSCs) have been fabricated using a flexible PET/ITO substrate with a low-temperature heating technique. Ammonium hydroxide/ethanol solution was used as an alternative binding agent to fabricate TiO2 paste, which can be removed at low-temperature heating. The conventional screen print method is still used in DSSC fabrication because it is a very cheap and easy technique. A hot-pressing method is also used to improve the quality of TiO2 films and the performance of DSSCs. The encapsulation technique used in the assembly of DSSC is expected to increase the stability of DSSC devices to prevent electrolyte leakage. The resulting TiO2 film shows the highest DSSC performance using the hot-pressing and encapsulation method with PCE 0.29%. The encapsulation technique increased the stability of DSSC devices with more extended durability than without encapsulation.

Effect of Natural Dye Extracts on the Absorbance Characteristics of TiO2 in Dye-Sensitized Solar Cells

Natural dye extracts from Chinese Ixora (Ixora chinensis) flower, Cassod flower (Cassia Siamea), Cassava leaf (Manihot Esculenta), purple heart (Tradescantia Pallida) and Copper leaf (Acalypha Wilkesiana) have been explored as sensitizers for the fabrication of dye-sensitized solar cells. The properties of the dyes were investigated using the FTIR and they all showed broad absorption bands in the 3800 to 3000cm-1 wavelenght and strong presence of intermolecular H-bonds. The effect of dye extracts on the absorbance and transmittance features of TiO2 was well studied by the UV-VIS and the absorbance peak was in the case of sensitization with Manihot Esculenta seen to radically improve above 1.0 at 350nm wavelength. Finally, the current and voltage characteristics of the DSSC were studied in sunlight and at a peak sunlight intensity of 601m/w2, the Manihot and Cassod sensitized devices exhibited maximum voltage values of 115 and 84mV respectively and maximum current values of 4.32 and 2.99mA. These plants have shown great potential for application in fabrication of cost effective and environmentally friendly DSSCs.

A study on using a binder-free TiO2 paste with sodium dodecylbenzene sulfonate addition to improve the performance of low-temperature DSSCs

The utilization of binder-free TiO2 paste allows for the dye-sensitized solar cells (DSSCs) TiO2 electrode fabrication at low temperatures, thus making it a potential material for flexible solar cell devices. However, the physical robustness of formed electrodes using TiO2 paste at low temperatures remains challenging, including issues such as cracking due to film stress and challenges in adjusting the viscosity of the TiO2 paste. In this study, we enhanced the binder-free TiO2 paste performance by incorporating sodium dodecylbenzene sulfonate (SDBS) as an additive for TiO2 electrode precursor solution. It demonstrated that SDBS additives help to relieve internal stress and ultimately enhance the physical and structural characteristics of the films by improving the viscosity in the TiO2 paste and promoting the dispersed pinholes within the TiO2 films. Furthermore, implementing TiO2 paste with varying ratios of SDBS has enabled the fabrication of DSSCs with the highest achieved power conversion efficiency (PCE) of 4.53%, representing an enhancement of nearly 15% compared to TiO2 paste without SDBS. This research presents a practical and effective approach for preparing highly efficient binder-free TiO2 paste.

Development of natural dye photosensitizers for dye-sensitized solar cells: a review.

Dye-sensitized solar cell (DSSC) is a photovoltaic device that can be produced from natural source pigments or natural dyes. The selection of natural dyes for DSSC application is currently under research. The utilization of natural dye materials that are easy to obtain, cost-effective, and non-toxic can reduce waste during DSSC fabrication. Natural dyes can be extracted from plants through extraction and chromatography methods. The suitability and viability of utilizing natural dyes as photosensitizers in DSSCs can be predicted using appropriate software simulation by varying related parameters to produce high power conversion efficiency. In this context, the purpose of the review is to highlight the evolution of performance improvement in the development of DSSCs with consideration of natural dye extraction and software simulation. This review also focuses on the results of extracting natural dyes from herbal ingredients, which are still very limited in information, and several parts of herbal plants that can be used as natural dye sources in the future of solid-state DSSCs have been identified. Based on the results of this review, the highest efficiency was obtained for the DSSC that used chlorophyll pigments as natural dyes using Peltophorum pterocarpum leaves with 6.07%, followed by anthocyanin pigments as natural dyes using raspberries (black) fruits with 1.5%, flavonoid pigments as natural dyes using Curcuma longa herbs with 0.64%, and flavonoid pigments as natural dyes using Indigofera tinctoria flowers with 0.46%.

Phosphorus-nitrogen compounds. Part 72. Bisspiro(N/N)cyclotri-phosphazenes with 4-chlorobenzyl and ferrocenyl pendant arms: Synthesis, structural characterization, dye-sensitized solar cell fabrication and antituberculosis activity studies

In this study, dichlorobisspiro(N/N)cyclotriphosphazenes with 4-chlorobenzyl and ferrocenyl-pendant arms were prepared to investigate their spectroscopic and crystallographic characterizations, and antituberculosis activities. The chlorine replacement reactions of tetrachloro(4-chlorobenzyl)spiro(N/N)cyclotri-phosphazenes with ferrocenyldiamines (4 and 5) lead to dichlorobispiro(N/N)cyclotriphosphazenes, containing unsymmetrical diaminospirorings. All cyclotriphosphazenes were characterized by mass spectrometry, FTIR and 31P NMR spectroscopies. Two different stereogenic P-centers are present in the unsymmetrically substituted inorganic-organic fused hybrid rings. These compounds may be in the form of racemic mixtures (RR'/SS' and RS'/SR'). The molecular and crystal structures of trans (6a and 7a) and cis (6b and 7b) isomers were elucidated by single-crystal X-ray structural crystallography. The space groups of trans-6a, cis-6b, trans-7a and cis-7b are centrosymmetric P -1, P bca, P 21/n and P bca, respectively. Therefore, the crystal lattices contain both enantiomers. The absolute configurations of P2 atoms of 6a, 6b, 7a and 7b are R, R, S and S, respectively. It was determined that the most effective compound was 6b against Mycobacterium tuberculosis H37Rv (ATCC 27,294) strain among the phosphazenes 6a, 6b and 10b. Among the compounds, In the reversible cyclic voltammograms of ferrocenyl-dispirophosphazenes, only one oxidation–reduction wave was observed. The HOMO energy values of the compounds were figured out using the oxidation potential (Eox). Whereas, the LUMO energy values were figured out from the optical band gap values using Tauc plots. In addition, it was determined that the most effective compound that can be used in dye-sensitized solar cells (DSSCs) is cis-11b.

First-Principles Investigations of Novel Guanidine-Based Dyes.

In the pursuit of finding efficient D-π-A organic dyes as photosensitizers for dye-sensitized solar cells (DSSCs), first-principles calculations of guanidine-based dyes [A1-A18] were executed using density functional theory (DFT). The various electronic and optical properties of guanidine-based organic dyes with different D-π-A structural modifications were investigated. The structural modification of guanidine-based dyes largely affects the properties of molecules, such as excitation energies, the oscillator strength dipole moment, the transition dipole moment, and light-harvesting efficiencies. The energy gap between the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) is responsible for the reduction and injection of electrons. Modification of the guanidine subunit by different structural modifications gave a range of HOMO-LUMO energy gaps. Chemical and optical characteristics of the dyes indicated prominent charge transfer and light-harvesting efficiencies. The wide electronic absorption spectra of these guanidine-based dyes computed by TD-DFT-B3LYP with 6-31G, 6-311G, and cc-PVDZ basis sets have been observed in the visible region of spectra due to the presence of chromophore groups of dye molecules. Better anchorage of dyes to the surface of TiO2 semiconductors helps in charge-transfer phenomena, and the results suggested that -COOH, -CN, and -NO2 proved to be proficient anchoring groups, making dyes very encouraging candidates for DSSCs. Molecular electrostatic potential explained the electrostatic potential of organic dyes, and IR spectrum and conformational analyses ensured the suitability of organic dyes for the fabrication of DSSCs.

Utilization of Ipomoea batatas L. tuber extract for the development of dye-sensitized solar cell with modified electrode from rice husk ash

A dye-sensitized Solar Cell (DSSC) is a solar cell device that works based on electro photochemical principles in which sensitive dyes are absorbed in the layer of photoelectrode. The utilization of natural dyes as a substitute for high-cost material in DSSC has been developed. Purple sweet potato (Ipomoea batatas L.) has high anthocyanin content, is safe to use, and has renewable properties that can be used as dyes in a layer of DSSC. Purple sweet potatoes contain a lot of fiber, carbohydrates, vitamins C and B1, and minerals needed in DSSC. The semiconductor compiler to produce solar cells is expensive and requires many. Rice husk has a relatively high silica content, about 87-97%, that can be used as a low-cost and environmentally friendly silicon. The result of this study showed the absorbance peak for the mixture of extract and rice husk ash at 320 nm. DSSC fabrication obtained the highest efficiency of 1.1 x 10-3 with Imax = 0.0015 mA and Vmax = 0.02 mV. The physical characteristics were observed using SEM and XRD. Natural dye from purple sweet potato and rice husk ash semiconductors can be alternatives for DSSC production.

Fabrication of efficient natural dye-sensitized Solar Cells using Mediterranean olive leaves as natural dye sensitizer

The synthesis of synthetic dyes employed in dye-sensitized solar cells (DSSCs) is often associated with substantial costs and environmental concerns. As a result, there is growing interest in utilizing natural dyes as sensitizers for DSSCs. This paper presents a comprehensive investigation into the extraction of natural dyes from Mediterranean olive leaves using a methanol-based solution, with a particular focus on the impact of different drying times during the dye extraction process on the efficiency of fabricated solar cells. The extracted olive leaf dyes were systematically characterized, encompassing their optical properties analyzed through ultraviolet–visible (UV–Vis) and Fourier Transform Infrared (FTIR) spectroscopy, electrochemical behavior, photovoltaic performance, crystallographic and morphological structures, as well as elemental composition. The research findings unveiled distinctive attributes of the olive leaf dyes, attributable to variations in their charge transfer processes to the band edge of the TiO2 semiconductor. These outcomes were substantiated through comprehensive analyses involving UV–Vis, FTIR, X-ray diffraction, scanning electron microscopy, and energy-dispersive X-ray spectroscopy. Notably, the olive leaf dye subjected to a longer drying time (referred to as OLDS1) exhibited an energy level of the lowest unoccupied molecular orbital (LUMO) closer to that of the conduction band of TiO2, facilitating efficient electron transfer. Furthermore, X-ray photoelectron spectroscopy revealed alterations in elemental composition upon dye adsorption onto the TiO2 surface, with a notable reduction in the intensities of the Ti 2p and O 1 s peaks. The OLDS1 dye demonstrated lower charge transfer resistance and recombination rates compared to the shorter drying time for both fluorine-doped tin oxide (FTO) and indium-doped tin oxide (ITO)-based natural DSSCs (NDSSCs). Importantly, the choice of substrate material, specifically FTO and ITO, significantly influenced the NDSSC performance. The FTO/TiO2/OLDS1 configuration exhibited remarkable characteristics, including a high fill factor (FF) of approximately 0.73 and an efficiency of 0.31 %, accompanied by a short-circuit current density of 0.662 mA/cm2 and an open-circuit voltage of 0.642 V. These results highlight the crucial role of drying time and substrate selection in the fabrication of NDSSCs utilizing Mediterranean olive leaf extracts, with the FTO/TiO2/OLDS1 configuration emerging as the most promising and efficient combination.

Application of rice husk as a carbon source for substitution of sensitizer and counter electrode material in dye-sensitized solar cells

The third generation of solar cells is dye-sensitized solar cells (DSSC). DSSC can convert solar energy into electrical energy. The main components of DSSC include working electrode, counter electrode, sensitizer, and electrolyte. Substitution of commercial chemicals for the sensitizer (N719) and the counter electrode (platinum) of DSSC will lower the cost of DSSC fabrication. This study focuses on Nitrogen-Doped Carbon Quantum Dots (N-CQDs) synthesized from rice husks as a sensitizer. Then, DSSC with sensitizer of N719 (Pt-1) and N-CQDs (Pt-2) were compared. Furthermore, the N-CQDs residue in solid carbon was used as the counter electrode material using different sensitizers N719 (C-1) and N-CQDs (C-2). Based on the results, the FTIR characterization of N-CQDs showed the functional groups N-H, O-H, C=O, and CN. The UV-VIS characterization of N-CQDs had absorbance in the wavelength range of 200-400 nm. Pt-2 has an efficiency value of 0.258%, Jsc of 2.188 mA/cm2 Voc of 0.6 volts, and FF of 0.20. C-2 has an efficiency of 0.0010%, Jsc of 0.042 mA/cm2 Voc of 0.131 volts, and FF of 0.17. This confirms that N-CQDs can be used as a sensitizer and counter electrode material, although the results are not as good as commercial chemicals.

Fabrication of efficient and economical dye-sensitized solar cells using carbon-coated nanotextured silicon wafers counter electrodes

Significant progress has been made in various fields of photovoltaics in response to the growing demand for alternative energy resources. Silicon technologies dominate the current solar cell market, but carbon-based photovoltaics are known for their ability to be produced at low cost and in large quantities. The electrocatalyst accelerates the conversion of tri-iodide into iodide ions at the interface between the counter electrode and the electrolyte, according to DSSC principle. During the catalytic process, the accessible sites for the reaction between the reactants and the catalyst are greatly influenced by the surface area and morphology of the counter electrode and electrocatalyst. Therefore, in this work, silicon micro cubes with different patterns were fabricated using lithography, and a carbon layer has been coated directly using chemical vapor deposition on the surface of silicon samples with 15, 30, and 60 mins growth times. The functionalized silicon surface with the carbon layer subsequently demonstrated electrocatalytic activities for iodide/triiodide reduction. In DSSCs, the carbon-coated samples have been utilized as counter electrodes. The samples were characterized using Raman spectroscopy and scanning electron microscopy. DSSCs were fabricated for each synthesized counter electrode, and DSSCs performance has been analyzed for each DSSC. Utilizing carbon-coated nanotextured silicon wafers as the counter electrodes, DSSCs were able to achieve the maximum power conversion efficiency of 6.73%. The current results pave the way toward the replacement of expensive Pt-based conventional DSSCs.

Room-Temperature Processable TiO2 Solar Paint for Dye-Sensitized Solar Cells

Dye-sensitized solar cells (DSSCs) have emerged as promising alternatives to traditional silicon photovoltaics owing to their environmentally friendly nature, easy preparation, and low cost. However, a critical bottleneck in DSSC fabrication lies in the high-temperature treatment required for the metal-oxide, primarily titanium dioxide (TiO2), photoanode. This study presents an advanced approach aimed at overcoming this challenge by developing a facile and cost-effective room temperature processable TiO2 paste for large-scale device production and commercialization. In our investigation, TiO2 nanoparticles were synthesized using the sol-gel hydrothermal method. The resulting material served as the basis for a solar paint formulation, utilized as a precursor for the photoanode in tertiary butyl alcohol. Applying this paint, achieved with a simple paintbrush, eliminated the need for high-temperature curing, binders, and reduced chemical additives. This minimizes energy consumption during fabrication and enhances the interface quality and charge transport properties of the photoanode, as evidenced by photovoltaic impedance spectroscopy measurements.

Experimental and theoretical studies on improving the efficiency of ZnO-based dye-sensitized solar cells using single-layer anti-reflective coating

The effect of a single-layer anti-reflective coating (ARC) on ZnO-based dye-sensitized solar cells (DSSCs) is theoretically predicted and verified by experimental fabrication. By the transfer matrix method (TMM), the absorption of the DSSC with and without the single-layer ARC is calculated and the improvement in short-circuit current density (∆ Jsc%) is estimated. The optimized thickness of the ARC required to obtain maximum improvement in the short-circuit current density (∆ Jsc%) is determined. By employing ARC with the calculated optimized thickness, the fabrication of spin-coated ZnO-based DSSCs is carried out. The structural and optical parameters are studied using XRD analysis and UV absorption spectra. The efficiency of the DSSC with and without the ARC is measured by intensity-modulated photocurrent and photovoltage spectroscopy. The theoretically predicted efficiency of the DSSC with and without ARC agrees well with the experimental values that provide insights about improving the electrical performance of the DSSC by the ARC.

A Review of Advances on Natural Dye Sensitized Solar Cells (NDSSCs)

Currently, the situation of the economy is drastically affecting the growth and development of some growing nations with regard to the energy sector. Most developing countries still depend majorly on fossil fuels. Considering the environmental nuisance arising from the dangerous emissions from the combustion of fossil fuels and climate concerns, there is urgent need to seek other alternative energy sources to meet up with the global energy consumption demands as the human population is steadily on the increase. Energy from the sun is one of the most alternative sources that can be assessed freely as well as help in mitigating global climate change. Recent advances on dye sensitized solar cells (DSSC) using natural dyes is a welcome advancement for replacing high cost ruthenium dye. The application of natural dye for DSSC is due to their abundance in nature, low cost, simple and safe extraction from various natural resources without requiring complex synthetic procedures. Dye enhances the performance of a DSSC by providing the source of photo excited electrons. Recently, there has been research on areas that supports the exploration of different photoactive natural dyes. In this paper, we reviewed some natural dyes, energy conversion efficiencies of NDSSCs, methods of dye extraction, characterization and various fabrication techniques for improved DSSC performance from various researched articles. It was observed that there were variations in the recorded DSSCs performances and this can be attributed to steps employed by the researchers in the methods of dye extraction and DSSC fabrication.