Durability Properties Of Composites Research Articles

This study aimed to investigate the effects of the sodium silicate-to-sodium hydroxide ratio, SH molarity, and carbon fiber volume fraction on the tensile strength and durability properties of mold-cast and 3D-printed geopolymer composites, including flexural and splitting tensile strengths, ultrasonic pulse velocity, water absorption, sorptivity index, and chloride penetration properties. For that purpose, the ground-granulated blast furnace slag and fly ash were employed as alumino-silicate-rich raw material. In order to activate the alumino-silicate-rich raw material, two sodium silicate/sodium hydroxide ratios of 1 and 2 and three sodium hydroxide molarities of 8M, 10M, and 12M were designated. Furthermore, carbon fiber was incorporated into the geopolymer composites at three volume fractions: 0%, 0.3%, and 0.6%. In total, 18 nonfibrous and fibrous geopolymer composites were manufactured in two different ways: mold-cast and 3D-printed. The findings demonstrated that the strength and durability characteristics of 3D-printed specimens were inferior to those of mold-cast specimens, attributed to the presence of weak interfacial bonds between layers. It has been observed that the incorporation of carbon fiber has the effect of improving tensile strength performance. Nevertheless, the addition of carbon fiber led to a slight decrease in UPV values, and an increase in water absorption and sorptivity index values. Also, it adversely influenced the chloride penetration of geopolymer composites. The findings of the study also indicated that increasing the sodium hydroxide molarity had a positive impact on the strength and durability properties of the composites. Nevertheless, it was observed that increasing the sodium silicate-to-sodium hydroxide ratio led to a decrease in both tensile strength and durability performances. Additionally, the microstructure of the geopolymer composites was analyzed using scanning electron microscope (SEM) images.

Read full abstract