Dubinin-Radushkevich Isotherm Research Articles

High-performance copper terephthalic acid metal-organic framework/gum Arabic/carrageenan composite beads for efficient lead(II) removal from aqueous solutions

Lead (Pb(II)) contamination poses a significant threat to human health and the environment. This study investigates a new approach for Pb(II) removal from polluted water using copper terephthalic acid metal-organic framework/gum Arabic/potassium carrageenan (MGC) composite beads. We synthesized copper terephthalic acid MOF, potassium carrageenan beads, and MGC composite beads to evaluate their adsorption potential. Characterization of the synthesized adsorbents was performed using TGA, nitrogen adsorption/desorption, ATR-FTIR, zeta potential, SEM, and TEM analyses, revealing that MOF > MGC > KG in thermal stability. The MGC composite exhibited a high specific surface area (398.03 m2/g) with mesopores and diverse functional groups, alongside a pH of zero point charge (pHpzc) of 6.8 and a small particle size (20 nm). The maximum Langmuir adsorption capacity for Pb(II) removal by MGC reached 374.7 mg/g under optimized conditions (20 °C, pH 5, 60 min shaking time, 3.0 g/L adsorbent dosage). The adsorption data fit well with the Pseudo-First-Order kinetic model and Langmuir and Dubinin-Radushkevich isotherm models. The adsorption process was physical, favorable, and endothermic. EDTA was used as a desorption agent, showing that the composite beads retained 97 % efficiency after ten cycles, highlighting MGC's potential as a sustainable strategy for Pb(II) remediation.

Adsorption of ortho-Nitrophenol from Aqueous Solution using Phosphated Biomass of Ailanthus excelsa: Kinetic and Equilibrium Studies

This study interprets phosphated biomass of Ailanthus excelsa (PBAE) as a eco-friendly, inexpensive and potential adsorbent for adsorption of ortho-nitrophenol (ONP) from aqueous solution by using batch adsorption method. The prepared biosorbent was characterized using a variety of techniques such as Brunauer Emmett Teller (BET), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and scanning electron microscope (SEM). As a function of many process parameters including material dose, contact time, concentration, pH and temperature, batch studies were conducted. It was found that a pH of 6.0, a biosorbent dosage of 0.050 g and an initial phenol concentration of 25 mg/L and temperature 298 K were the best conditions for ONP removal. The maximum sorption was found to be 95.28%. Adsorption data was better fitted to the Langmuir, Freundlich, Temkin and Dubinin Radushkevich isotherms. It was demonstrated that the sorption rate follows the pseudo-second order kinetics and intraparticle diffusion theory and the biosorption process was spontaneous and exothermic in nature.

On the Valorization of Olive Oil Pomace: A Sustainable Approach for Methylene Blue Removal from Aqueous Media.

Currently, industrial water pollution represents a significant global challenge, with the potential to adversely impact human health and the integrity of ecosystems. The continuous increase in global consumption has resulted in an exponential rise in the use of dyes, which have become one of the major water pollutants, causing significant environmental impacts. In order to address these concerns, a number of wastewater treatment methods have been developed, with a particular focus on physicochemical approaches, such as adsorption. The objective of this study is to investigate the potential of a bio-based material derived from olive oil pomace (OOP) as an environmentally friendly bio-adsorbent for the removal of methylene blue (MB), a cationic dye commonly found in textile effluents. The biobased material was initially characterized by determining the point of zero charge (pHpzc) and using scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR). Subsequently, a comprehensive analysis was conducted, evaluating the impact of specific physicochemical parameters on MB adsorption, which included a thorough examination of the kinetic and thermodynamic aspects. The adsorption process was characterized using Langmuir, Freundlich, Brunauer-Emmett-Teller (BET), and Dubinin Radushkevich (D-R) isotherms. The results suggest that the equilibrium of adsorption is achieved within ca. 200 min, following pseudo-second-order kinetics. The optimal conditions, including adsorbent mass, temperature, bulk pH, and dye concentration, yielded a maximum adsorption capacity of ca. 93% (i.e., 428 mg g-1) for a pomace concentration of 450 mg L-1. The results suggest a monolayer adsorption process with preferential electrostatic interactions between the dye and the pomace adsorbent. This is supported by the application of Langmuir, BET, Freundlich, and D-R isotherm models. The thermodynamic analysis indicates that the adsorption process is spontaneous and exothermic. This work presents a sustainable solution for mitigating MB contamination in wastewater streams while simultaneously valorizing OOP, an agricultural by-product that presents risks to human health and the environment. In conclusion, this approach offers an innovative ecological alternative to synthetic adsorbents.

Optimization, Kinetic and Thermodynamic Study of Rhodamine B Removal by Zinc Chloride-activated Arachis hypogaea (Groundnut Husk) biochar

Adsorption of dye from industrial effluent before discharge into the environment has become a major challenge to the food, pharmaceutical, textile, photographic and cosmetic industries. This has led scientists to the search for suitable green solutions. Carbonized and zinc chloride activated Arachis hypogaea (groundnut husk) in a 1:1 ratio was used as an adsorbent for the removal of Rhodamine B from aqueous solution. The adsorbent was characterized by ash content, bulk density, moisture content, pH, Iodine number, surface area and functional group analyses. Key parameters such as initial pH, initial concentration of Rhodamine B dye, temperature and contact time were investigated. The equilibrium data obtained were correlated with Langmuir, Freundlich, Temkin and Dubinin-Radushkevich isotherms. It was found that both the Freundlich and Langmuir isotherms fit well to the data. The Langmuir isotherm model best describes the uptake of Rhodamine B onto zinc chloride activated groundnut husk biochar with R2 > 0.997. Maximum Rhodamine B. dye removal was observed at a pH of 11.0, with an adsorbent dosage of 1.0 g, a contact time of 125 min, an initial dye concentration of 20 mg/L and a temperature at 315 K. The efficiency of zinc chloride activated groundnut husk biochar for Rhodamine B removal was 99.55% for dilute solutions at 50 g/L. The Fourier Transform Infrared (FTIR) spectra recorded before and after activation showed the numbers of functional groups available for Rhodamine B. molecules to bind onto in the studied adsorbent. The kinetic data were best described by the pseudo-first-order and pseudo second-order models, while the thermodynamic studies indicated a spontaneous and endothermic nature in the adsorption of Rhodamine B by the zinc chloride modified groundnut husk. This research clearly details an innovative approach to utilizing carbonized and zinc chloride-activated Arachis hypogaea (groundnut husk) as an eco-friendly adsorbent for the removal of Rhodamine B from industrial effluents.

Adsorption Performance of Fe-Mn Polymer Nanocomposites for Arsenic Removal: Insights from Kinetic and Isotherm Models.

Global concern over arsenic contamination in drinking water necessitates innovative and sustainable remediation technologies. This study evaluates the adsorption performance of Fe-Mn binary oxide (FMBO) nanocomposites developed by coating polyethylene (PE) and polyethylene terephthalate (PET) with FMBO for the removal of As(III) and As(V) from water. Adsorption kinetics were rapid, with equilibrium achieved within 1-4 h depending on the material and pH. PET-FMBO and FMBO exhibited faster rates and higher arsenic removal (up to 96%) than PE-FMBO. Maximum As(III) adsorption capacities ranged from 4.76 to 5.75 mg/g for PE-FMBO, 7.2 to 12.0 mg/g for PET-FMBO, and up to 20.8 mg/g for FMBO, while capacities for As(V) ranged from 5.20 to 5.60 mg/g, 7.63 to 18.4 mg/g, and up to 46.2 mg/g, respectively. The results of the Dubinin-Radushkevich isotherm model, with free energy (Ea) values exceeding 16 kJ/mol, suggest chemisorption is the dominant mechanism, which is supported by the kinetics data. Given the effective removal of As(III), chemisorption likely proceeds through ligand exchange during the Mn oxide-mediated oxidation of As(III) and complexation with hydroxyl groups on the nanocomposite. These findings highlight the strong potential of Fe-Mn polymer nanocomposites, particularly PET-FMBO, for efficient arsenic removal during practical water treatment applications.

Improving the adsorption properties of low surface area hardwood biochar for the removal of Fe+ and PO₄3- from aqueous solution.

Biochar produced from wood residues may provide a new method and material for managing the environment, particularly in terms of carbon sequestration and contaminant remediation. Additionally, biochar produced from wood residues is free of chemical fertilizers, likewise in rice straw, wheat straw, corn straw, etc. This study investigated the removal of iron from aqueous solutions by a novel low-cost and eco-friendly biochar made from hardwood trees and modified by adding MgCl2 for effective phosphate removal. Optimal adsorption conditions were determined through studies of adsorption time, pH, and adsorbent dosage. Batch equilibrium isotherm and kinetic experiments and pre/post-adsorption characterizations using FESEM-EDS, XRD, and FTIR suggested that the presence of carboxyl group elements and colloidal and nano-sized MgO (periclase) particles on the biochar surface were the main adsorption sites for aqueous iron and phosphate respectively. In this study, the HW and MgO-HW biochar showed excellent Dubinin-Radushkevich isotherm (D-R) maximum adsorption capacities of 289.45 and 828.82mg/g for iron and phosphate. The kinetic study for iron and phosphate adsorption was described well by pseudo second-order model and pseudo second-order model respectively. The HW biochar and the prepared MgO-HW biochar exhibited commendable iron adsorption (98.25%) performance at 10 pH units and phosphate (96.22%) at pH 6 respectively. Thus, this research reveals a waste-to-wealth strategy by converting hardwood waste into mineral-biomass biochar with excellent Fe and P adsorption capabilities and environmental adaptability.

Low temperature physical activation of raw charcoal for excellent dye adsorption kinetics

The current work illustrates the physical activation of raw charcoal to produce activated carbon (AC) at low temperatures (300 and 500 °C). Prepared ACs are tested for Methylene blue (MB) adsorption experiments at various adsorption conditions (e.g., pH, temperature) and discussed efficiency, kinetics, isotherm models, and adsorption mechanism to determine the optimal adsorption conditions for the removal of MB dye. The results show that the prepared ACs (AC1, AC2 at 300 and 500 °C) efficiently absorb MB and obtain removal efficiency of ∼100 and 83% in 1 h, respectively. When the pseudo-first-order and pseudo-second-order adsorption kinematic models are used to test the adsorption data, the result fits the pseudo-first-order model better. The Freundlich and Langmuir adsorption isotherms are employed to model the isotherm data to get the maximum adsorption capacity (MAC). The MAC for AC1 and AC2 is found to be 39.14 and 40.98 mg/g, respectively. Additionally, MB adsorption has been analyzed using the Temkin and Dubinin–Radushkevich isotherm models, along with the inter-particle diffusion model. The Dubinin–Radushkevich model suggests that MB adsorption is a physical absorption process. The Temkin model showed that the Temkin constant (B) values are positive indicating that the adsorption is exothermic. The inter-particle diffusion model revealed that AC2 displays greater adsorption kinetics consistency due to its larger pore diameter. The results reveal that the Langmuir model captured the data better, demonstrating that monolayer adsorption dominated the absorption process. Additionally, prepared ACs are examined for reuse, and exhibit three cycles of recyclability. As a result, ACs made from oak wood charcoal are an easy affordable way to get rid of MB dye.

Bentonite-verbena biochar composite for anionic dye removal: Investigation, simulation and modeling

This research investigates the potential of a novel bentonite-verbena biochar composite for the removal of methyl orange from wastewater. Comparative adsorption studies demonstrated that this biocomposite significantly outperforms traditional adsorbents, exhibiting an 83.12 % improvement over raw bentonite. The molecular dynamics simulation revealed the specific mechanism for the enhanced synergistic effect observed between bentonite and biochar in the adsorption of methyl orange. Furthermore, the impact of operational parameters (adsorbent mass, pH, contact time and initial dye concentration) on the adsorption process was systematically evaluated. However, nonlinear modeling indicated that the pseudo-second-order kinetic model and the Dubinin-Radushkevich isotherm model best described the kinetic and adsorption process. This biocomposite, composed of verbena biochar, shows outstanding adsorption performance for methyl orange, anionic dye, opening up new avenues for the development of innovative and sustainable adsorbent materials derived from bioresources.

Advanced biopolymer-based Ti/Si-terephthalate hybrid materials for sustainable and efficient adsorption of the tetracycline antibiotic

This study involves the synthesis of an organic-inorganic hybrid material consisting of Ti/Si-terephthalate (Ti-TPA-Si) in a 1:1:1 ratio using sol-gel method and its reaction with cellulose and chitosan (Ti-TPA-Si-C and Ti-TPA-Si-CS). Characterization techniques such as XRD, FTIR, SEM, EDS, XPS, BET, TGA, and DTA were used. The incorporation of biopolymers (cellulose and chitosan) into the Ti/Si-terephthalate structure improved the morphology and textural properties of the hybrid materials, leading to increased adsorption capacity and sustainability. Adsorption experiments reveal that Ti-TPA-Si, Ti-TPA-Si-C, and Ti-TPA-Si-CS hybrid materials exhibit a high affinity towards tetracycline, achieving remarkable adsorption efficiencies of 88.27, 89.60, and 88.98 %, respectively. Isotherm studies indicate that the adsorption process follows both Langmuir (R2 = 0.971, 0.990, and 0.994) and Dubinin-Radushkevich (R2 = 0.922, 0.965, and 0.949) isotherm models. According to the Langmuir model, the maximum adsorption capacity (qm) of Ti-TPA-Si, Ti-TPA-Si-C, and Ti-TPA-Si-CS adsorbents was found to be 24.10, 33.56, and 26.59 mg/g, respectively. Kinetic studies indicate that the adsorption process follows both pseudo-second-order (R2 = 0.998, 0.984, and 0.989) and intra-particle diffusion (R2 = 0.995, 0.994, and 0.988) models. Thermodynamic studies reveal that adsorption processes are spontaneous and endothermic in nature. Reusability studies demonstrate their potential for repeated use without significant loss in performance.

Utilization of macadamia nutshell-derived activated carbon for enhanced congo red adsorption

This study addresses the challenge of removing Congo red (CR) from aqueous solutions using activated carbon (AC) derived from macadamia nutshells (MNS). A unique two-step carbonization and pyrolysis process was employed to produce MNS-AC with high surface area and porosity. Key experimental variables, including initial CR concentration, contact time, and pH, were systematically varied in batch mode. Results indicated that the modified AC achieved significantly higher removal percentages compared to unmodified charcoal. At pH 2.0 and an initial dye concentration of 50 mg L−1, CR removal reached 97.48 % for MNS-AC3. The maximum adsorption capacity (qmax) of 58.29 mg g−1 was observed at an initial dye concentration of 200 mg L−1. The pseudo-second-order kinetic model closely matched the experimental data, and equilibrium data analysis using Langmuir and Dubinin-Radushkevich (D-R) isotherm models provided excellent fits. This research demonstrates the potential of using industrial biomass waste to develop sustainable solutions for dye removal in wastewater treatment.

Citrus limon peel-based biosynthesis: Lead oxide, zinc oxide, cadmium oxide, and copper oxide nano quantum dots for subtraction of anionic Actas Pink dye (AAPD)

ABSTRACT Adsorption is a highly effective method for wastewater quality adjustment, offering advantages such as low cost and availability of adsorbents. This study investigates the efficient removal of Anionic Actas Pink dye (AAPD), a major contributor to environmental pollution. Green adsorbents including lead oxide (PbO), zinc oxide (ZnO), cadmium oxide (CdO), and copper oxide (CuO) were synthesized via eco-friendly routes for AAPD removal. Maximum adsorption capacities (qe) were observed at pH 7 (PbO, ZnO, CdO) and pH 2 (CuO and native) with values of 83.83 mg/g at 100 ppm, 75.65 mg/g at 100 ppm, 70.50 mg/g 75 ppm, 61.21 mg/g at 150 ppm, and 52.69 mg/g at 150 ppm, respectively, using an adsorbent dose of 0.05 g/50 mL at temperature of 37°C, and 90 min contact time. Adsorption followed Langmuir isotherm for all adsorbents except native, with PbO also fitting Freundlich and Dubinin–Radushkevich isotherms. Kinetics adsorption data supported pseudo-second-order, while thermodynamic analysis indicated spontaneous and exothermic nature. Effects of electrolytes, surfactants, and desorption were also evaluated. Characterization through FTIR, SEM, and XRD confirmed the morphology and functional groups of these nano-quantum dots. Citrus limon peel-based biosynthesis offers sustainable, eco-friendly, and cost-effective alternatives, highlighting their potential for dye adsorption.

Studies on the equilibrium, thermodynamics, and kinetics of the biosorption of copper (II) and lead (II) onto Indian willow (Salix tetrasperma) leaves

ABSTRACT Potentially toxic metals in water threaten humans, animals, and the environment. The potential of Indian willow (Salix tetrasperma) leaves to biosorb copper and lead from water was examined. Utilising scanning electron microscopy (SEM), energy dispersive X-ray (EDX), and Fourier transform infrared spectroscopy (FTIR) spectrum analysis, the properties of Salix tetrasperma biomass (STB) was investigated. The maximum removal percentage (92.8% for copper and 89.9% for lead) was achieved at pH 5.0, a biosorbent dosage of 3.0 g/L at 25°C, and a 10 mg/L initial concentration of copper and lead. The determination of the point zero charge (pHzpc = 5.0) indicated the prevalence of a negative charge on the surface of the biosorbents. The kinetic equation utilised in the pseudo-second-order model effectively. Langmuir isotherm better described experimented data than the Freundlich model. The Dubinin-Radushkevich isotherm provided a good fit for the study's equilibrium data. STB recorded an adsorption capacity, Qmax, of 43.99 mg/g for copper (II) and 39.66 mg/g for lead (II) ions at an optimum pH of 5. Thermodynamically, the biosorption of both ions on STB was spontaneous, endothermic, and feasible. The selected modified STB was found to be suitable for adsorbing copper (II) and lead (II) metal ions.

Bioremediation of Brilliant Green cationic dye from water using Nutraceutical Industrial Coriander Seed Spent as an adsorbent: adsorption isotherms, kinetic models, and thermodynamic studies.

The article details a feasibility study of removing Brilliant Green (BG), a mutagenic dye from an aqueous solution by adsorption using low-cost coriander seed spent as a by-product in the nutraceutical industry. The study includes an analysis of the parameters that affect the adsorption process. The variables that have been identified include pH, dye concentration, process temperature, adsorbent amount, and particle size of the adsorbent. To obtain information on the adsorption process and to design the mechanism of the adsorption system on experimental equilibrium, 10 isotherm models, namely, Langmuir, Freundlich, Jovanovic, Dubinin-Radushkevich, Sips, Redlich-Peterson, Toth, Vieth-Sladek, Brouers-Sotolongo, and Radke-Prausnitz were applied. It was discovered that the experimental adsorption capacity, qe, was roughly 110mgg-1. The result has a maximum adsorption of 136.17 mgg-1 as predicted by Dubinin-Radushkevich isotherm. Diffusion film models, Dumwald-Wagner and Weber-Morris models, and pseudo-first- and second-order models, were used to determine the adsorption kinetics. It was realized that the adsorption kinetics data fit into a pseudo-second-order model. Thermodynamic analysis with a reduced enthalpy change suggests a physical process. The values of the thermodynamic parameters ΔG0, ΔH0, and ΔS0 demonstrated an endothermic and nearly spontaneous process of adsorption. The small valuation of ΔH0 specifies that the process is physical. FTIR spectroscopy and SEM imaging were used to confirm that the BG dye had been adsorbing on the adsorbent surface. The study concludes that NICSS is an effective adsorbent to extract BG dye from wastewater solutions, offers insights into numerous dye and adsorbent interaction possibilities and indicates that the process can be scaled to fit into the concept of circular economy.

Deep Cleaning of Crystal Violet and Methylene Blue Dyes from Aqueous Solution by Dextran-Based Cryogel Adsorbents.

Polysaccharides have recently attracted growing attention as adsorbents for various pollutants, since they can be extracted from a variety of renewable sources at low cost. An interesting hydrophilic and biodegradable polysaccharide is dextran (Dx), which is well-known for its applications in the food industry and in medicine. To extend the application range of this biopolymer, in this study, we investigated the removal of crystal violet (CV) and methylene blue (MB) dyes from an aqueous solution by Dx-based cryogels using the batch technique. The cryogel adsorbents, consisting of cross-linked Dx embedding a polyphenolic (PF) extract of spruce bark, were prepared by the freeze-thawing approach. It was shown that the incorporation of PF into the Dx-based matrix induced a decrease in porosity, pore sizes and swelling ratio values. Moreover, the average pore sizes of the DxPF cryogels loaded with dyes further decreased from 42.30 ± 7.96 μm to 23.68 ± 2.69 μm, indicating a strong interaction between the functional groups of the cryogel matrix and those of the dye molecules. The sorption performances of the DxPF adsorbents were evaluated in comparison to those of the Dx cryogels and of the PF extract. The experimental sorption capacities of the DxPF cryogel adsorbents were higher in comparison to those of the Dx cryogels and the PF extract. The DxPF cryogels, particularly those with the highest PF contents (sample DxPF2), demonstrated sorption capacities of 1.2779 ± 0.0703 mmol·g-1, for CV, and 0.3238 ± 0.0121 mmol·g-1, for MB. The sorption mechanisms were analyzed using mathematical models, including Langmuir, Freundlich, Sips and Dubinin-Radushkevich isotherms, and kinetic models, like pseudo-first-order (PFO), pseudo-second-order (PSO), Elovich and intra-particle diffusion (IPD). The sorption process was best described by the Sips isotherm and PSO kinetic models, indicating chemisorption as the dominant mechanism. This study outlines the importance of developing advanced renewable materials for environmental applications.

Adsorption of vanadium using a new anionic Schiff Base adsorbent and its application to vanadium separation from boiler ash

AbstractBackgroundThis study reports the preparation of 2‐hydroxy‐3‐(4‐(((2‐((2‐(((E)‐4‐(2‐hydroxy‐3‐(trimethylammonio)propoxy)‐3‐methoxybenzylidene)amino)ethyl)amino)ethyl)imino)methyl)‐2‐methoxyphenoxy)‐N,N,N‐trimethylpropan‐1‐aminium (HYM/QA). The adsorbent was employed to extract and concentrate vanadium from its solutions and boiler ash samples.ResultsThe impact of initial dosage, pH, reaction time and temperature on the sorption behavior of V(V) was examined. Under optimal conditions (pH 5, 0.08 g dose, 45 min at room temperature), a sorption capacity of 392.25 mg g−1 was achieved. The uptake of V(V) on HYM/QA was effectively reversed using 1 mol L−1 NaOH, regenerating the material. After six cycles of sorption and elution, the sorption capability remained at 91.4% of its initial value. The efficiency and selectivity of HYM/QA toward V5+ ions were assessed using the separation factor parameter, revealing limited interference from heavy metals such as Mn2+, Cr3+, Pb2+, Si4+, Al3+, NO32−, HCO3− and Zn2+. The uptake process of HYM/QA for V(V) conformed to the Langmuir and Dubinin–Radushkevich isotherm models and the pseudo‐second‐order kinetic model. HYM/QA was characterized by infrared, Brunauer–Emmett–Teller surface area, 1H NMR, 13C NMR and gas chromatography–mass spectrometry analyses, confirming successful preparation. Thermodynamic assessments suggested that the sorption process is endothermic, spontaneous and becoming more favorable with rising temperature.ConclusionThe optimized conditions were used to adsorb vanadium from boiler ash samples, and the obtained vanadium pentaoxide was analyzed and confirmed using various tools, demonstrating the material's effectiveness for vanadium extraction. © 2024 Society of Chemical Industry (SCI).

Comparative Evaluation of the Dubinin–Radushkevich Isotherm and Its Variants

Comparative Evaluation of the Dubinin–Radushkevich Isotherm and Its Variants

Seaweed Superheroes: Cystoseira barbata-Incorporated Electrospun Fibers for Lead Ion Sequestration.

The efficient removal of lead ions at low concentrations is paramount in combating the significant threat posed by water pollution resulting from industrial activities and population growth. In this study, electrospun C. barbata/PAN fibers were developed to efficiently remove lead(II) ions from water. The morphology, structure, and mechanical properties of the fibers were examined, highlighting that the augmentation of the surface area through the conversion of C. barbata into the polymer fibers facilitates increased metal bonding sites during sorption. C. barbata/PAN fibers exhibited superior characteristics, including higher surface area, smaller pore size, and increased pore volume, compared to powdered C. barbata. The effects of factors such as shaking time, algae percentage, sorbent amount, pH, metal concentration, and temperature on Pb(II) sorption were investigated by the batch method. At an initial ion concentration of 100 μg L-1 and pH 4.0, C. barbata (5 wt %)/PAN fiber demonstrated a notable sorption efficiency of 89-90% (270 μg/g) after 60 min. The equilibrium data align with the Freundlich and Dubinin-Radushkevich isotherm models, whereas the pseudo-second-order kinetic model provides the most suitable description. The characterization of fibers after sorption revealed that carboxyl, hydroxyl, and sulfonyl groups play an active role in Pb(II) sorption.

Adsorption of Brilliant Scarlet 3r dye onto Corn Silk as Agricultural Waste in Neutral Medium

This study investigates the adsorption of Brilliant Scarlet 3r dye (BS 3r) onto corn silk (CK), an agricultural waste, in a neutral medium. The characteristics of corn silk as an adsorbent were analyzed using Fourier transform infrared spectroscopy (FTIR) and Atomic force microscopy (AFM). Batch adsorption experiments were conducted to examine the effects of corn silk weight, initial BS 3r concentration, adsorption period, adsorption temperature, and pH of the medium on the adsorption process. Langmuir, Freundlich and Dubinin-Radushkevich (D-R) isotherms models were used to represented the equilibrium experimental date, the obtained values of correlation coefficient R2 indicated that the adsorption followed the Langmuir isotherm. The kinetics analysis results showed that the adsorption of Brilliant Scarlet 3r dye (BS 3r) onto corn silk followed the pseudo second-order model (PSOM), indicating its suitability for describing the adsorption kinetics. Thermodynamic parameters, including ∆G˚, ∆H˚, and ∆S˚, indicated that the adsorption process of BS 3r dye onto corn silk was spontaneous and exothermic in nature.

Biosorption of Cd(II), Co(II), and Cu(II) onto Microalgae under Acidic and Neutral Conditions

The biosorption of Cd, Co, and Cu onto three microalgae species (Chlorella vulgaris, Scenedesmus sp., and Spirulina platensis) was compared to determine the microalgae’s capability for heavy metal adsorption in acidic and neutral environments. The Langmuir, Freundlich, and Dubinin–Radushkevich isotherm models were used to characterize the adsorption of the heavy metals onto microalgae. The maximum adsorption capacity (qmax) determined using the Langmuir and D-R model showed results in the order of Cu > Co > Cd in both acidic and neutral conditions. A shift from acidic to neutral conditions increased the microalgae’s adsorption affinity for heavy metals, as determined using the Freundlich parameter (KF). The adsorption affinity of the biomass for Cd and Co was in the order S. platensis > C. vulgaris > Scenedesmus sp. while that of Cu was in the order C. vulgaris > Scenedesmus sp. > S. platensis. In addition, it was found that the adsorption of Cd and Co enhanced the production of Dissolved Organic Content (DOC) as a byproduct of biosorption, whereas the adsorption of Cu appeared to suppress the generation of DOC. The mean adsorption energy (E) values computed by the D-R model were less than 8 (kJ/mol), indicating that physisorption was the primary force of sorption in both acidic and neutral settings. The findings of this study suggest that microalgae may be used as a low-cost adsorbent for metal removal from industrial effluent.

Studies on Sorption and Release of Doxycycline Hydrochloride from Zwitterionic Microparticles with Carboxybetaine Moieties.

The aim of this study was to examine the use of zwitterionic microparticles as new and efficient macromolecular supports for the sorption of an antibiotic (doxycycline hydrochloride, DCH) from aqueous solution. The effect of relevant process parameters of sorption, like dosage of microparticles, pH value, contact time, the initial concentration of drug and temperature, was evaluated to obtain the optimal experimental conditions. The sorption kinetics were investigated using Lagergren, Ho, Elovich and Weber-Morris models, respectively. The sorption efficiency was characterized by applying the Langmuir, Freundlich and Dubinin-Radushkevich isotherm models. The calculated thermodynamic parameters (ΔH, ΔS and ΔG) show that the sorption of doxycycline hydrochloride onto zwitterionic microparticles is endothermic, spontaneous and favorable at higher temperatures. The maximum identified sorption capacity value is 157.860 mg/g at 308 K. The Higuchi, Korsmeyer-Peppas, Baker-Lonsdale and Kopcha models are used to describe the release studies. In vitro release studies show that the release mechanism of doxycycline hydrochloride from zwitterionic microparticles is predominantly anomalous or non-Fickian diffusion. This study could provide the opportunity to expand the use of these new zwitterionic structures in medicine and water purification.