Dual-comb Technique Research Articles

Absolute angular position measurement by dual-comb spectroscopy of an autocollimation diffracted beam.

The dual-comb technique is a powerful tool in industrial inspection and scientific research and is capable of realizing ultrahigh-resolution and fast broadband spectral measurements. We propose an absolute angular-position measurement method based on dual-comb spectroscopy. With a simple layout, the absolute angular position can be naturally determined through the traceable and wide-amplitude spectra of the autocollimation diffracted beams of the target grating. We experimentally demonstrate that a precision of 0.12 arcsec in the dynamic range of approximately 6660 arcsec, along with a 1 kHz repetition rate difference, is achieved. Compared with a commercial autocollimator, over 1000 arcsec, the comparison residuals are kept within ±0.3 arcsec.

All-fiber bidirectional mode-locked laser to generate cylindrical vector beam asynchronous noise-like pulses.

We proposed and demonstrated a bidirectional mode-locked fiber laser to generate cylindrical vector beam (CVB) asynchronous pulses based on a graded index multimode fiber. A homemade fused taper two-mode fiber optical coupler (TMF-OC) is employed as a mode converter. The central wavelength for clockwise (CW) pulses can be tuned from 1030.32 nm to 1041.04 nm due to the filtering effect based on multimode interference, that of counterclockwise (CCW) pulses is from 1030.81 nm to 1039.28 nm. When the central wavelengths are 1033.22 nm and 1032.71 nm for CW direction and CCW direction respectively, CVB asynchronous noise-like pulses with a repetition rate difference of ∼436.9 Hz can be obtained. The purity of CVB in CW direction and CCW direction is 95.7% and 93.4% respectively. This bidirectional mode-locked fiber laser with CVB output can be better applied to laser gyroscopes, asynchronous sampling, and dual-comb technique, and impel the interdisciplinary studies in the future.

Bidirectional mode-locked fiber laser based on nonlinear multimode interference

Bidirectional mode-locked lasers are an ideal light source for dual-comb technique for their system compactness and common noise cancellation. Here, we report an all-fiber bidirectional mode-locked laser based on nonlinear multimode interference. Asynchronous pulse trains in different directions with a repetition rate difference of 7 Hz are obtained. Besides, we record the pulse trains and spectra at different pump powers. In our experiment, the counter-propagating pulse (CPP) trains can operate in different states, such as the counterclockwise (CCW) direction works in single pulse while the clockwise (CW) direction works in multi-pulse or harmonic mode-locking. We believe that the work will provide a new platform for studying the dynamic characteristics of bidirectional mode-locked lasers.

Silicon Integrated THz Comb Radiator and Receiver for Broadband Sensing and Imaging Applications

This article presents a fully integrated terahertz (THz) comb/pulse radiator and a broadband frequency-comb heterodyne receiver for sensing and imaging applications. The chipset is fabricated in the GlobalFoundries 90-nm SiGe BiCMOS process. The comb radiator utilizes p-i-n diode sharp reverse recovery to generate THz frequency comb/pulses. The repetition rate of the radiated pulses is locked to a stable off-chip source, which can be adjusted to as high as 15 GHz. By using a low-phase noise off-chip source rather than an on-chip oscillator, low phase noise and high-frequency stability are achieved. The phase noise of 405-GHz tone is −82 dBc at a 10-kHz offset frequency. The radiated tones are characterized from 220 GHz up to 1.1 THz using VDI SAX modules with the measured EIRP of −11, −15, and −36 dBm at 405, 500, and 750 GHz, respectively. In addition, a THz frequency comb detector using a Schottky barrier diode passive mixer is presented. The detector uses a broadband comb as LO for heterodyne detection of any arbitrary spectrum in mm-wave/THz band by adjusting the spacing of the LO comb from 100 s of MHz up to 15 GHz with a resolution of 2 Hz. The receiver chip is characterized from 220 up to 500 GHz with the measured NF of 24.5, 36, and 44 dB at 270, 405, and 495 GHz, respectively. Moreover, a dual-comb technique using the radiator and receiver chips is demonstrated, promising a compact low-cost solution for dual-comb sensing applications. The radiator and receiver chips consume a dc power of 40 and 38 mW, respectively.

Research progress of terahertz semiconductor optical frequency combs

Optical frequency comb consists of a series of equally spaced and highly stable frequency lines. Due to the advantages of the ultra-high frequency stability and ultra-low phase noise, the optical frequency combs have important applications in high precision spectroscopy, imaging, communications, etc. In the terahertz frequency range, semiconductor-based electrically pumped terahertz quantum cascade lasers have the characteristics of high output power and wide frequency coverage, and are the ideal candidates for generating terahertz optical frequency combs. In this article, we first briefly introduce the research progress of the optical frequency comb in the communication and the mid-infrared bands. Then we mainly review the research progress of the optical frequency combs based on the terahertz semiconductor quantum cascade laser (QCL) operating in free-running, active frequency stabilization and passive frequency stabilization modes. In free running mode, the terahertz QCL frequency comb is mainly limited by the large group velocity dispersion which results in a small comb bandwidth. Therefore, the dispersion compensation is one of the important methods to stabilize the optical frequency comb and broaden the spectral bandwidth. At present, the active frequency stabilization mode is a relatively matured method to realize the optical frequency combs in terahertz QCLs. In this article, we also detail the methods and applications of terahertz QCL dual-comb operations, including on-chip dual-comb and dual-comb spectroscopy. Compared with the Fourier transform infrared spectroscopy and time domain spectroscopy, the terahertz dual-comb spectroscopy has advantages in fast data acquisition (real-time) and high spectral resolution. The emergence of the dual-comb technique not only verifies the concept of optical frequency combs, but also further promotes the applications of frequency combs.

Toward Compact and Real-Time Terahertz Dual-Comb Spectroscopy Employing a Self-Detection Scheme

Due to its fast and high resolution characteristics, dual-comb spectroscopy has attracted an increasing amount of interest since its first demonstration. In the terahertz frequency range where abundant absorption lines (finger prints) of molecules are located, multiheterodyne spectroscopy that employs the dual-comb technique shows an advantage in real-time spectral detection over the traditional Fourier transform infrared or time domain spectroscopies. Here, we demonstrate compact terahertz dual-comb spectroscopy based on quantum cascade lasers (QCLs). In our experiment, two free-running QCLs generate approximately 120 GHz wide combs centered at 4.2 THz, with slightly different repetition frequencies. We observe that $\sim$490 nW terahertz power coupling of one laser into the other suffices for laser-self-detecting the dual-comb spectrum that is registered by a microwave spectrum analyzer. Furthermore, we demonstrate practical terahertz transmission dual-comb spectroscopy with our device, by implementing a short air path at room temperature. Spectra are shown of semiconductor samples and of moist air, the latter allowing rapid monitoring of the relative humidity. Our devices should be readily extendable to perform imaging, microscopy and near-field microscopy in the terahertz regime.

Time-resolved dual-comb measurement of number density and temperature in a laser-induced plasma.

We utilize time-resolved dual-comb spectroscopy to measure the temporal evolution of the population number densities and absorption excitation temperature of Fe in a laser-induced plasma. The spectra of three excited-state transitions of Fe around 533nm are simultaneously measured at different time delays following laser ablation of a stainless steel sample. This Letter probes late-time behaviors of laser-induced ablation plumes during plasma cooling. The high spectral resolution and broad spectral coverage of the dual-comb technique, combined with the time-resolved measurement capability shown here, will aid in the characterization of laser induced plasmas, including species identification and molecule and particle formation that can occur at later times in the plasma evolution.

Linear and nonlinear frequency- and time-domain spectroscopy with multiple frequency combs.

Two techniques that employ equally spaced trains of optical pulses to map an optical high frequency into a low frequency modulation of the signal that can be detected in real time are compared. The development of phase-stable optical frequency combs has opened up new avenues to metrology and spectroscopy. The ability to generate a series of frequency spikes with precisely controlled separation permits a fast, highly accurate sampling of the material response. Recently, pairs of frequency combs with slightly different repetition rates have been utilized to down-convert material susceptibilities from the optical to microwave regime where they can be recorded in real time. We show how this one-dimensional dual comb technique can be extended to multiple dimensions by using several combs. We demonstrate how nonlinear susceptibilities can be quickly acquired using this technique. In a second class of techniques, sequences of ultrafast mode locked laser pulses are used to recover pathways of interactions contributing to nonlinear susceptibilities by using a photo-acoustic modulation varying along the sequences. We show that these techniques can be viewed as a time-domain analog of the multiple frequency comb scheme.

Real-time dual-comb spectroscopy with a free-running bidirectionally mode-locked fiber laser

Dual-comb technique has enabled exciting applications in high resolution spectroscopy, precision distance measurements, and 3D imaging. Major advantages over traditional methods can be achieved with dual-comb technique. For example, dual-comb spectroscopy provides orders of magnitude improvement in acquisition speed over standard Fourier-transform spectroscopy while still preserving the high resolution capability. Wider adoption of the technique has, however, been hindered by the need for complex and expensive ultrafast laser systems. Here, we present a simple and robust dual-comb system that employs a free-running bidirectionally mode-locked fiber laser operating at telecommunication wavelength. Two femtosecond frequency combs (with a small difference in repetition rates) are generated from a single laser cavity to ensure mutual coherent properties and common noise cancellation. As the result, we have achieved real-time absorption spectroscopy measurements without the need for complex servo locking with accurate frequency referencing, and relatively high signal-to-noise ratio.