Dual Chamber Microbial Fuel Cell Research Articles

Eco-friendly, low-cost, and antibacterial PEM boosts microbial fuel cell performance: Power generation and wastewater treatment

The performance of microbial fuel cells (MFCs) relies significantly on the proton exchange membrane (PEM). While effective, commercial options like Nafion 117 are costly and possess inherent weaknesses. Improving methods of PEMs are generally used, requiring spending energy and money and causing harmful and toxic chemicals to enter the environment. This study introduces an innovative approach by enhancing sulfonated polyether sulfone (SPES) properties using Falcaria vulgaris extract, offering a simple, environmentally friendly, cost-effective solution. The resulting green functionalized SPES membranes (GFSPESs) were evaluated in dual-chamber MFCs for energy production and textile wastewater treatment. SPES membranes were fabricated through a phase inversion process and subsequently functionalized using dip-coating, heating, and UV irradiation. Comprehensive analysis, including FTIR, EDS, SEM, and XPS, investigated the physicochemical structure of the PEMs. The plant extract exhibited notable benefits, enhancing hydrophilicity, proton conductivity, and antibacterial capability of the PEMs. The MFC with GFSPES-12 achieved a peak power output of 86.3 mW/m2 and a maximum current of 327 mA/m2, surpassing the performance of Nafion 117 and the bare SPES membranes. GFSPES-12 also exhibited a maximum ion exchange capacity (1.89 meq/g) and proton conductivity (2.98 mS/cm). In textile wastewater treatment, the GFSPESs demonstrated improved COD removal (96.12 %) and higher coulombic efficiency (42.23 %). Notably, GFSPES-12 exhibited an antibacterial efficiency exceeding 93.5 %. These findings affirm the efficient functionality of GFSPES membranes in dual-chamber MFCs, offering a promising and sustainable alternative for energy production and wastewater treatment.

Performance of Dual Chamber Microbial Fuel Cells with Waste Water for Power Production and Treatment

Abstract: Dual-chamber microbial fuel cells (MFCs) have garnered significant attention in recent years due to their promising potential for sustainable energy generation from organic waste. This review provides a comprehensive overview of the advancements, challenges, and future prospects of dual-chamber MFC technology. The paper begins with an introduction to the principles of microbial fuel cells and the rationale behind the dual-chamber configuration. It discusses the design considerations including electrode materials, membrane selection, and reactor configurations, highlighting recent innovations aimed at enhancing performance and scalability. Key advancements in dual-chamber MFCs are reviewed, focusing on improvements in power output, microbial community dynamics, and substrate utilization. Strategies such as microbial enrichment, biofilm engineering, and electrode modifications are discussed in detail, showcasing their impact on MFC performance and stability. Furthermore, the review explores the application of dual-chamber MFCs in various fields including wastewater treatment, bioenergy productions.

Struvite recovery from microbial fuel cells treating different nutrient-rich wastewaters

Wastewater is an abundant renewable source of nutrients such as nitrogen and phosphorus. However, current recovery methods require substantial amounts of energy and chemicals, which pose various economic and environmental burdens. Microbial fuel cells (MFCs) represent a feasible alternative for nutrient recovery from wastewater as they reduce the cost of chemicals and energy input while producing electricity from treated organics. Despite the promising benefits of MFCs, there is limited knowledge of the effect of substrate type on their operation and nutrient recovery. Therefore, this study investigates the efficiency of struvite formation for nutrient recovery in 700-ml-volume dual-chamber MFCs using various wastewaters: urine, centrate, and greywater (laundry and dishwasher wastewater). The performance was assessed based on electricity output, organics removal in terms of soluble chemical oxygen demand (SCOD), and struvite recovery. The highest SCOD removal efficiency of over 95 % was achieved with the centrate-fed cell. Moreover, the highest maximum power densities generated from the urine, centrate, and greywater-fed MFCs were 1.7, 1.5, and 0.95 mW/cm2, respectively. In terms of struvite recovery, the urine-fed cell produced the highest struvite precipitate quantity (2.1 g/l), followed by the centrate (1.8 g/l) and the greywater (0.4 g/l). The phosphate recovery efficiencies were 55, 36, and 48 % for the MFCs treating urine, centrate, and greywater, respectively. Morphological and chemical analyses of the formed precipitates confirmed that the nutrients were recovered primarily as struvite. Overall, the results and conclusions of the present study support the potential for utilizing MFCs for nutrient recovery and energy generation.

Development of a Novel Composite Polymer Electrolyte Membrane for Application as a Separator in a Dual Chamber Microbial Fuel Cell

Development of a Novel Composite Polymer Electrolyte Membrane for Application as a Separator in a Dual Chamber Microbial Fuel Cell

The Application of Cows Rumen for Electricity Generation Through The Implementation of A Ceramic-Based Microbial Fuel Cell System

The growth in population is not adequately matched by the corresponding increase in energy demand. The imperative for prioritizing the exploration of alternative energy sources that possess attributes of safety, affordability, and ample access to raw materials cannot be overstated. An energy source with significant potential is a microbial fuel cell (MFC)-based energy source. This study aims to investigate the utilization of cow rumen as a substrate and source of nutrition in the bioenergy system of microbial fuel cells (MFCs). The present study aims to investigate the impact of substrate concentration and bacterial incubation duration derived from bovine rumen bacteria on the attainment of optimal power density. The research employed a Dual Chamber Microbial Fuel Cell (MFC) device using a Proton Exchange Membrane (PEM) constructed from ceramic materials. Daily observations were conducted over a period of 30 days. The performance of MFC was assessed utilizing the polarization technique. The findings indicated that altering the proportion of bovine rumen bacterial substrates and the duration of bacterial incubation had an impact on the power density seen in the Microbial Fuel Cell (MFC) system. The optimal conditions were attained when the substrate concentration reached 3640 ppm and after 7 days, resulting in a maximum power density of 864 mW/m2.

Bioelectricity from Dual Chamber Microbial Fuel Cell (MFC) using Aspergillus niger with Sugarcane Bagasse Substrate

Electricity consumption is increasing, causing fossil fuels to run out more quickly. Various efforts are needed to develop renewable energy, including generating electricity. One of the developments in renewable energy comes from biomass. There are various types of biomass developed, one of which is biomass of microorganisms which carry out metabolic activities by utilizing organic material to produce metabolites which include energy. Microbial fuel cell (MFC) is a technology that produces electrical energy with the help of microorganisms that degrade organic materials through catalytic reactions or bioelectrochemical mechanisms from microorganisms. In this research, bioelectricity produced from MFC was tested using Aspergillus Niger with sugarcane bagasse as a substrate. The voltage value obtained from observations carried out for 15 days obtained a voltage in the range of 1.3-4.2 mV

Poultry Residual Biomass as Substrate to Generate Bioelectricity using a dual Chamber Microbial Fuel Cell “MFC” with Graphite and Copper Electrodes

Microbial fuel cells (MFC) are electrochemical systems through which sustainable energy can be produced due to the degradation of organic matter using substrates with a varied chemical composition. The bioprocess that takes place inside the MFC takes advantage of the oxidation of organic matter. This process releases protons and electrons extracellularly, and the latter are transferred from the anode to the cathode generating bioelectricity. The MFC operating system produces energy due to the bacterial metabolism, through an electron transfer phenomenon that reflects into a bio energy conversion with minimal impacts on the environment. With the MFC system, it is possible to investigate the use of new residual substrates for energy production, the types of native microbial communities that develop during the degradation of specific compounds and the design of more efficient cells. In this research, copper and graphite were evaluated as low-cost electrodes using batch microbial fuel cells for 208 hours of operation, a data logger was used, and physicochemical parameters were taken during this period. The maximum power density presented was 14 mW/m2 with the graphite electrode and 6.7 mW/m2 with the copper electrode. Electrogenic bacteria were identified through biochemical and molecular tests such as bacterial culture, strain purification, DNA extraction and sequencing of microorganisms. The bacteria were uploaded to the NCBI gene data bank and the identity of these strains was identified: avian graphite 1 “Av_A1” (Pseudomonas aureginosa), avian graphite 2 “Av_A2” (Bacillus cereus) and avian copper 1 “AV_C1” (Bacillus tropicus). A dual chamber MFC was assembled, so each microbial cell can contain the residual substrate and the corresponding electron acceptor, both for the anodic and cathodic cell. These cells were separated by a Nafion® or Ultrex® membrane cation exchange membrane. The results showed us that optimal conditions for the generation of bioelectricity can be established in MFC cells, adding information to the literature on the behavior of bacteria that thrive in stressful environments such as copper and simple materials such as the graphite.

Fabrication of Zr MOF-doped polyvinylidene fluoride membranes and testing in H-type microbial fuel cell

Microbial fuel cells (MFCs) are an important tool that generates electricity from waste biomass. Polymer electron membrane supported dual-chamber MFCs are one of the most tested microbial fuel cells. The most important factor affecting performance in this system is the proton transfer capability of the membrane.In this study, zirconia based metal organic frameworks (Zr-MOF) doped porous membranes were produced, characterized and used in dual chamber (H-type) MFC to generate electricity from animal manure (Cow manure). The effects of MOF ratio on membrane’s physical, chemical properties, and on the cell performance were investigated. The incorporation of MOF into the PVDF matrix improved the water retention property of the membrane. The Zr-MOF addition increased the mechanical strength from 0.55 MPa to 1.52 MPa. The cation exchange capacity increased from 1.04 mmol/g to 2.41 mmol/g. It significantly increased the cell electricity production from 0.186V to 0.49V. The power density values are obtained as 5.02 and 13.8 mW/m2 with the pristine and Zr-MOF(4)-PVDF membranes, respectively.

Sustainable power production from petrochemical industrial effluent using dual chambered microbial fuel cell

Dual chambered microbial fuel cell (DMFC) is an advanced and effective treatment technology in wastewater treatment. The current work has made an effort to treat petrochemical industrial wastewater (PWW) as a DMFC substrate for power generation and organic substance removal. Investigating the impact of organic load (OL) on organic reduction and electricity generation is the main objective of this study. At the OL of 1.5 g COD/L, the highest total chemical oxygen demand (TCOD) removal efficiency of 88%, soluble oxygen demand (SCOD) removal efficiency of 80% and total suspended solids (TSS) removal efficiency of 71% were seen, respectively. In the same optimum condition of 1.5 g COD/L, the highest current and power density of about 270 mW/m2 and 376 mA/m2 were also observed. According to the results of this study, using high-strength organic wastewater in DMFC can assist in addressing the issue of the petrochemical industries and minimize the energy demand.

Relationship between organic removal and power production in a dual-chamber microbial fuel cell with intermittent mode

Unoptimised simultaneous performance in microbial fuel cell (MFC) is still a big concern due to a lack of information on the correlation between organic removal and power production. Its correlation becomes more substantial owing to the main factors which affect a concurrent condition. To contribute new insight, this study aimed to analyze the relationship between the main factors for determining the optimal condition of MFC performance. Dual-chamber MFC (DCMFC) was designed by modifying the anode chamber into two compartments, namely double anode chamber DCMFC (DAC-DCMFC), operated within 8 days running with intermittent mode. The differences of organic loading rate (OLR), 0.4; 1.0; 2.5 kg.m−3.d−1 represented low to high organic loadings and electrode material-based reactor types, were used to assign the optimal concomitant performance in DCMFC. A closed circuit voltage (CCV) wiring system plugged onto the data logger within running time was employed to evaluate the synchronous achievement. This study result was medium OLR 1.0 kg.m−3.d−1, and GNPs anode-PTFE cathode attained optimally in the performance. In addition, higher OLR does not indicate higher organic removal correlating linearly with power production. This finding contributes to the limitation of organic loading that biological role capabilities can use.

Investigation of microbial fuel cell performance based on the nickel thin film modified electrodes

Microbial fuel cells (MFCs) are a self-sustaining and environmentally friendly system for the simultaneous was tewater treatment and bioelectricity generation. The type and material of the electrode are critical factors that can influence the efficiency of this treatment process. In this study, graphite plates and carbon felt were modified through the electrodeposition of nickel followed by the formation of a biofilm, resulting in conductive bio-anode thin film electrodes with enhanced power generation capacity. The structural and morphological properties of the electrode surfaces were characterized using X-ray diffraction, energy-dispersive X-ray spectroscopy, elemental mapping, and field-emission scanning electron microscopy techniques. Maximum voltage, current density, and power generation were investigated using a dual-chamber MFC equipped with a Nafion 117 membrane and bio-nickel-doped carbon felt (bio-Ni@CF) and bio-nickel-doped graphite plate (bio-Ni@GP) electrodes under constant temperature conditions. The polarization and power curves obtained using different anode electrodes revealed that the maximum voltage, power and current density achieved with the bio-Ni@CF electrode were 468.0 mV, 130.72 mW/m2 and 760.0 mA/m2 respectively. Moreover, the modified electrodes demonstrated appropriate stability and resistance during successful runs. These results suggest that nickel-doped carbon-based electrodes can serve as suitable and stable supported catalysts and conductors for improving efficiency and increasing power generation in MFCs.

Co-Fe-N@biochar anode for improvment the electricity generation performance of microbial fuel cell

ABSTRACT Microbial fuel cells (MFCs) can generate energy while processing organic pollutants, which has a great impact on environmental wastewater treatment applications. In this study, a gel polymer was formed by Co-Fe-N co-doping biochar (Co-Fe-N@BC), which was used as the anode material to improve the electricity generation performance of MFC. The Co-Fe-N@BC material prepared at 900℃ carbonised biomass into more graphitic carbon, and its total resistance (3.56 Ω) was significantly reduced. In the corresponding dual-chamber MFC, the current density was 2.81 A/m2, and the power density reached 1181 mW/m2 at maximum. Among the materials tested, the Co-Fe-N@BC anode MFC had the highest chemical oxygen demand removal rate and coulombic efficiency, reaching 91% and 13%, respectively. It is proved that MFC with Co-Fe-N@BC anode has the best electrochemical performance.

Insights on hexavalent chromium(VI) remediation strategies in abiotic and biotic dual chamber microbial fuel cells: electrochemical, physical, and metagenomics characterizations

Hexavalent chromium [Cr(VI)] is one of the most carcinogenic and mutagenic toxins, and is commonly released into the environemt from different industries, including leather tanning, pulp and paper manufacturing, and metal finishing. This study aimed to investigate the performance of dual chamber microbial fuel cells (DMFCs) equipped with a biocathode as alternative promising remediation approaches for the biological reduction of hexavalent chromium [Cr(VI)] with instantaneous power generation. A succession batch under preliminary diverse concentrations of Cr(VI) (from 5 to 60 mg L−1) was conducted to investigate the reduction mechanism of DMFCs. Compared to abiotic-cathode DMFC, biotic-cathode DMFC exhibited a much higher power density, Cr(VI) reduction, and coulombic efficiency over a wide range of Cr(VI) concentrations (i.e., 5–60 mg L−1). Furthermore, the X-ray photoelectron spectroscopy (XPS) revealed that the chemical functional groups on the surface of biotic cathode DMFC were mainly trivalent chromium (Cr(III)). Additionally, high throughput sequencing showed that the predominant anodic bacterial phyla were Firmicutes, Proteobacteria, and Deinococcota with the dominance of Clostridiumsensu strict 1, Enterobacter, Pseudomonas, Clostridiumsensu strict 11 and Lysinibacillus in the cathodic microbial community. Collectively, our results showed that the Cr(VI) removal occurred through two different mechanisms: biosorption and bioelectrochemical reduction. These findings confirmed that the DMFC could be used as a bioremediation approach for the removal of Cr(VI) commonly found in different industrial wastewater, such as tannery effluents. with simultaneous bioenergy production.

Application of Microbial Fuel Cell (MFC) for Bioremediation of Ammonia

Ammonia is a poisonous compound that can harm fish. Fish feed and manure are the primary sources of ammonia in catfish farming ponds. High concentrations of ammonia can cause death. Therefore, it is necessary to control the presence of ammonia to minimize the potential for fish mortality. Microbial Fuel Cell (MFC) is a technology that can help with ammonia bioremediation. This study aims to analyze the effectiveness of Microbial Fuel Cell (MFC) in reducing ammonia. The research method used is an experimental research method with qualitative descriptive analysis. The research was conducted on a laboratory scale using a dual-chamber Microbial Fuel Cell (MFC) reactor connected using a salt bridge. This research was conducted with variations in the use of sticky media, including without media, with bioball, and with bioring media. The results showed that the percentage of ammonia reduction in each treatment was 94.52%, 98.09%, and 99.28%. From this research, it can be concluded that Microbial Fuel Cells (MFC) are effective in reducing ammonia.

Statistical optimization of waste molasses-based exopolysaccharides and self-sustainable bioelectricity production for dual chamber microbial fuel cell by Bacillus piscis

BackgroundThe application of exopolysaccharide-producing bacteria (EPS) in dual chamber microbial fuel cells (DCMFC) is critical which can minimize the chemical oxygen demand (COD) of molasses with bioelectricity production. Hence, our study aimed to evaluate the EPS production by the novel strain Bacillus piscis by using molasses waste. Therefore, statistical modeling was used to optimize the EPS production. Its structure was characterized by UV, FTIR, NMR, and monosaccharides compositions. Eventually, to highlight B. piscis' adaptability in energy applications, bioelectricity production by this organism was studied in the BCMFC fed by an optimized molasses medium.ResultsB. piscis OK324045 characterized by 16S rRNA is a potent EPS-forming organism and yielded a 6.42-fold increase upon supplementation of molasses (5%), MgSO4 (0.05%), and inoculum size (4%). The novel exopolysaccharide produced by Bacillus sp. (EPS-BP5M) was confirmed by the structural analysis. The findings indicated that the MFC's maximum close circuit voltage (CCV) was 265 mV. The strain enhanced the performance of DCMFC achieving maximum power density (PD) of 31.98 mW m−2, COD removal rate of 90.91%, and color removal of 27.68%. Furthermore, cyclic voltammetry (CV) revealed that anodic biofilms may directly transfer electrons to anodes without the use of external redox mediators. Additionally, CV measurements made at various sweep scan rates to evaluate the kinetic studies showed that the electron charge transfer was irreversible. The SEM images showed the biofilm growth distributed over the electrode’s surface.ConclusionsThis study offers a novel B. piscis strain for EPS-BP5M production, COD removal, decolorization, and electricity generation of the optimized molasses medium in MFCs. The biosynthesis of EPS-BP5M by a Bacillus piscis strain and its electrochemical activity has never been documented before. The approach adopted will provide significant benefits to sugar industries by generating bioelectricity using molasses as fuel and providing a viable way to improve molasses wastewater treatment.

Bioelectricity Generation from Bamboo Hydrolysate by Microbial Fuel Cells Using Pseudomonas Aeruginosa PR3 for Natural Resource Conservation

Microbial fuel cell (MFC) is a green technology that allows recovery of electricity from wastes, thus, it can be applied in environmental conservation, natural resource preservation and bioenergy production. As an attempt to efficiently utilize the increasing amount of bamboo wastes as an input for energy production, this study investigated the electricity generation efficiency of a dual-chamber MFC in sugar conversion into electricity using Pseudomonas aeruginosa PR3 and hydrolysates from the acid pretreatment of Bambusa stenostachya Hack.. MFCs were inoculated with PR3, acclimated with glucose then operated with bamboo hydrolysates containing different total reducing sugars as the anolytes. Total sugar consumption of the MFCs for electricity conversion varied from 76.25 to 96.30% after 48 hours of operation in bamboo hydrolysates. Results from electrochemical analysis showed that MFC with 9.0 g/L sugars from bamboo hydrolysates had better electricity production, with the maximum open-circuit voltage of 620 mV, current density of 1092.08 mA/m2 and power density of 91.16 mW/m2. Microbial communities in these MFCs could effectively recover electricity from up to 9.0 g/L reducing sugars in bamboo hydrolysates, preliminarily illustrating the applicability of the MFC technology in natural resource conservation as a way to produce alternative energy sources from the treatment of bamboo-processing wastes.

A Novel Computational Platform for Steady-State and Dynamic Simulation of Dual-Chambered Microbial Fuel Cell

Microbial fuel cell (MFC) is attractive for research community as a promising bioelectricity production technology using organic waste. However, due to low performance and erroneous reproducibility and replicability, MFC lacks industrial application. Additionally, the nonlinear dynamic behavior of MFC, along with the involvement of electrochemistry and biology in mathematical models, makes it difficult to comprehend and simulate. To overcome these barriers, this study provides a simulation platform for conducting theoretical studies using a fundamental mathematical model of MFC. This novel Simulink/MATLAB model is based on mass balance across both compartments of MFC, and provides power density as a function of a wide range of performance-affecting parameters. Model validation depicts only 2%–10% error. This model can provide a stepping stone to perform theoretical optimization and industrial application studies in future. By varying the values of different parameters; studies may be performed to spot optimum values of the most sensitive parameters. Therefore, using the proposed tool paves the path for further improvements in design, cost effectiveness and performance efficiency that ultimately promises up-scaling of MFCs as a renewable and alternative energy resource.

Investigating the effect of anode materials on the performance and microbial community in an integrated chamber-free microbial fuel cell

Conventionally, there are two basic configurations for microbial fuel cell (MFC), one with anode and cathode chambers, as known as dual-chamber MFC, one with only anode chamber and a air–cathode, called single-chamber MFC. However, electrode materials' complex configuration and high resistance limit their practical applications in power generation and wastewater purification. To this end, we constructed three MFCs using carbon felt, Ni/Ti, and Ag-Ni/Ti as anodes based on our previously constructed integrated chamber-free MFC (iMFC). After 21 days of operation, the Ag-Ni/Ti-MFC performed best in bioelectricity output and removal of target pollutants. The bioelectricity output parameters were an open-circuit voltage of 0.773 V, a maximum current density of 552.1429 mA/m2, and a power density of 426.8064 mW/m2. Furthermore, the MFC achieved removals of 67.90% for the chemical oxygen demand (COD), 55.20% for total nitrogen (TN), and 61.83% for ammonia nitrogen (NH3-N). Introducing silver nanoparticles to the transmembrane and outer membrane boosted the charge extraction efficiency in the MFCs. Moreover, 16S rDNA analysis indicated that typical electricity-producing bacteria, including Comamonas, Paraclostridium, and Asaccharospora, had a higher relative abundance in the Ag-Ni/Ti-MFC anode than in other anodes. Overall, the surface structure of different anode materials plays a critical role in bioelectricity generation and wastewater purification using iMFC by affecting the mass transfer of substrates and metabolites.

High electricity generation and wastewater treatment enhancement using a microbial fuel cell equipped with conductive and anti-biofouling CuGNSs/SPES proton exchange membrane

This research is the first to examine the use of biosynthesized Cu-Graphene nanosheets (CuGNSs) in a sulfonated polyethersulfone (SPES) matrix to fabricate an anti-biofouling proton exchange membrane (PEM) applied in a microbial fuel cell (MFC) for high power generation and treatment of ostrich skin tanning wastewater. The study involved fabricating CuGNSs/SPES membranes using a phase inversion method with different CuGNSs loadings (0.25, 0.5, 1.0, and 2.0 wt%), and characterizing them using several techniques, including FTIR, XRD, SEM, EDS, XPS, water uptake, cation exchange capacity, zeta potential, oxygen penetration, and antibacterial activity. The results showed that the presence of Cu, graphene, and biofunctionalities in the membrane's structure increased their hydrophilicity, proton selectivity, and anti-biofouling resistance, thereby improving the MFC's performance. The MFC using CuGNSs2.0/SPES generated a maximum power and current density of 84.1 mW/m2 and 320 mA/m2, respectively, which was twice higher than the MFC using Nafion117. The result was also confirmed by the proton conductivity and cation exchange capacity analysis, as the CuGNSs2.0/SPES showed a value of 1.84 mS/cm and 0.98 meq/g respectively, which was higher than Nafion117 (1.28 mS/cm and 0.83 meq/g). The modified membranes also exhibited a higher COD removal of ostrich tanning effluent (maximum 97.72%) and coulombic efficiency (maximum 43.29%), as well as maximum antibacterial activity against gram-negative and gram-positive bacteria (>95%). The study suggests that the new CuGNSs/SPES membranes can be effectively used in dual-chamber MFCs.

Copper recovery from printed circuit boards leaching solution with bioelectricity generation using microbial fuel cell

Recovery of valuable metals via leaching printed circuit boards (PCBs) has gained moment recently. This work studied the Microbial fuel cell (MFC) performances for recovery of Cu from a Cu2+ solution by examining key operating parameters. A dual-chamber MFC with 6cm × 6cm × 7cm dimensions was constructed. Both anode and cathode electrodes were made of a carbon cloth sheet. The anodic and cathodic chambers were separated by a Nafion membrane. The highest Cu recovery efficiency was 99.7% after 240h batch mode operation, yielding 102 mW/m2 MFC power density output using 1g/L Cu2+ solution as the catholyte (initial pH 3) and an anolyte containing 1g/L sodium acetate inoculated with a sludge from a wastewater treatment plant's anaerobic pond, with 2cm distance between the electrodes made of polyacrylonitrile polymer. The highest open circuit voltage, current density (based on cross-section cathode area) and power density with an external load of 1 kΩ was 555mV, 347mA/m2 and 193 mW/m2, respectively. Additionally, recovery of Cu in the leachate of PCBs using sulfuric acid leaching after 48h was performed and the highest Cu recovery was 50% in 48h.