Dry Aggregates Research Articles

Cover cropping enhanced soil aggregation and associated carbon and nitrogen storage in semi-arid silage cropping systems

Wind and water erosion in arid and semi-arid regions significantly degraded soil, reduced soil organic carbon (SOC) storage, and exacerbated the impact of climate change on agricultural productivity. Cover cropping is one of the approaches to improve soil health and reduce climate change impacts, yet its impacts on soil aggregation and associated SOC and nitrogen (N) storage in water-limited environments are poorly understood. This study aimed to evaluate soil aggregate dynamics and aggregate-associated SOC and soil total N in irrigated silage sorghum [Sorghum bicolor L. (Moench)] − corn (Zea mays L.) rotations with various cover crop mixtures: grasses + brassicas + legumes (GBL), grasses + brassicas (GB), grasses + legumes (GL), and no cover crops (NCC). Results showed in the second year of the study that, at 0–0.1 m depth, mean weight diameter and geometric mean diameter of dry aggregates were 22–23 % and 6 % greater, respectively, with cover crops than NCC. At the same depth, cover crop treatments had 15–17 %, 15–16 %, and 13 % greater SOC in 0.25–2, 0.053–0.25, and < 0.053 mm aggregate classes, respectively, compared to NCC. Similarly, at 0–0.1 m depth, N in < 0.053 mm fraction was 8–10 % greater with cover crops than without. In the fourth year of the study, water-stable aggregates (WSA) percent did not differ among treatments, but WSA-associated SOC was 31–37 % and 12–16 % greater with cover crops at 0–0.1 and 0.1–0.2 m depths, respectively, than without. The WSA-associated N at 0–0.1 m was 21–33 % greater with cover crops than without. Despite the inconsistencies in soil aggregate stability results, cover crop-integrated silage systems showed greater SOC and N within aggregate classes and water stable aggregates. This insight is crucial for advancing sustainability in silage production systems, particularly in the context of increasing climate change and variability in erosion-prone soils of arid and semi-arid regions.

The role of soil structure on the cracking and cadmium leaching behavior of biochar-amended fine-grained soils

Biochar has shown promising potential for soil remediation, yet its impact on heavy metals (HMs) immobilization often overlooks soil structure, which could influence soil cracking behavior and HMs transport. To address this gap, this study investigates the role of soil structure (dry density and aggregate size) on the cracking and cadmium (Cd) leaching behavior of biochar-amended fine-grained soils. A series of semi-dynamic leaching tests were conducted on samples with and without wetting-drying (W-D) cycles. Based on the proposed improved method for quantifying the effective diffusion coefficient (De) of Cd in unsaturated soils and microstructural analyses, we found that: (1) Higher dry density and larger aggregate generally resulted in smaller De by decreasing soil pore volume. (2) Biochar could connect isolated pores within large aggregates through its internal pores, yielding greater increases in De (294.8%–469.0%) compared to small aggregates (29.1%–77.4%) with 3% biochar. However, further increases in biochar dosage led to decreased De, primarily due to the dense pore structure. (3) Biochar effectively inhibited soil cracking, achieving the highest reduction of 36.8% in surface crack ratio. (4) After W-D cycles, samples exhibited higher De with increasing dry density, with aggravated cracking being the primary cause, suggesting preferential flow within the cracks, particularly those penetrating the soil. This study highlights the importance of careful consideration of soil structure and cracking potential before in situ field application of biochar as a remediation agent for HMs-contaminated fine-grained soils.

A high throughput approach for measuring soil slaking index

AbstractSoil wet aggregate stability is widely measured for soil health ratings, and two mobile applications have been recently developed that provide simple and fast measurements of wet aggregate stability on three pea‐sized soil aggregates. However, techniques are needed to scale the test to make it practical for studies with large sample numbers. Here, we describe an approach to measure 10‐min slaking index on 20–36 aggregates simultaneously using a multi‐well plate and automated image analysis. We used this approach to measure 160 soil samples (2120 aggregates) from a long‐term tillage and cover crop trial in a corn (Zea mays L.)‐based agroecosystem in central Iowa. We evaluated the statistical power of slaking index, needed replication, sensitivity to cultural practices, and sensitivity to sample collection date to inform future sampling efforts. We found that small numbers of highly unstable aggregates lead to skewed distributions for slaking index. We concluded that at least 20 aggregates per sample were useful to provide confidence in measurement precision, although the experiment had high statistical power with only 10–12 replicates per sample. Slaking index was not sensitive to the initial size of dry aggregates (3‐ to 10‐mm diameter); therefore, pre‐sieving soils was not necessary. Consistent with prior studies, the field trial showed greater aggregate stability under no‐till than chisel plow practice and changing stability over a growing season. This multi‐well method will help researchers measure a useful soil health indicator with greater precision, and more efficiently sample spatial and temporal variation.

Estimating the Lifetime of Rotary Dryer Flights Based on Experimental Data

The studies carried out address an important problem for the concrete and asphalt industry, referring to the wear phenomena that affect the elements (flights) of rotary dryers used to dry mineral aggregates. In this article, the authors propose a lifetime estimation method for rotary dryer flights. In order to benefit from greater credibility, the proposed method was applied based on the experimental results obtained, by the authors, in the laboratory, on a stand that reproduces a portion of the real equipment. Starting from these results, the authors identified the mathematical functions used to model the failure rates (wear) of the flights by referring to characteristic quantities for wear evaluation: mass loss of material; reduction in the thickness of the part; surface affected by wear. The experimental data—the input data for the proposed algorithm—correspond to six steels used in industrial applications. The wear phenomenon was modeled considering both the situation of uniform wear and the situation of differentiated wear on the flight surface. Therefore, the steel type with the highest service life values could be identified, namely, steel grades E and G. The method proposed in this paper can be extended to any category of material or part provided that the failure rate function is identified beforehand, possibly based on a laboratory experiment.

Plastic deformation of dry fine-grained olivine aggregates under high pressures

Abstract This study investigates the effect of pressure on diffusion creep of dry San Carlos and synthetic (prepared by sol-gel method) olivine. We prepared dry (water content &amp;lt; 9 ppm wt) fine-grained (&amp;lt; 1 μm grain-size) olivine and deformed the samples (both San Carlos and solgel olivine in the same assembly) in the same sample assembly under high-pressure (P = 2.9–8.8 GPa) and modest temperatures (T = 980–1250 K) at a fixed strain-rate. Evolution of strength was studied using the radial X-ray diffraction from various diffraction planes. We found that San Carlos and sol-gel olivine show similar rheological behaviour (when normalized to the same grain-size). Stress estimated by the radial X-ray diffraction increases with time and initially shows similar values for all diffraction planes. In many cases, stress values start to depend on the diffraction planes in the later stage and time dependence becomes minor. The micro-structural observations show that grain-size increases during an experiment. The results are interpreted using a theory of radial X-ray diffraction and the theoretical models of diffusion and dislocation creep. We conclude that the initial stage of deformation is by diffusion creep, but deformation in the later stage is by dislocation creep. For dislocation creep, our results are in reasonable agreement with previous low temperature dislocation creep results after a correction of temperature effect. For diffusion creep, we obtain an activation volume of 7.0 ± 2.4 cm3/mol that is substantially smaller than the values reported on dislocation creep but agrees well with the results on grain-growth. By comparing the present results on dry olivine with the previous results on wet (water-saturated) olivine, we found that water enhances diffusion creep but only modestly in comparison to dislocation creep. The difference in the pressure and water content dependence between diffusion and dislocation creep has an important influence on the dominant deformation mechanisms of olivine in the upper mantle.

Influence of crop rotation, irrigation, fertilization, and tillage on the aggregate property and soil wind erosion potential in the floodplain of the Yellow River

The floodplain of the Yellow River (FPYR) is threatened by severe soil erosion. Soils are often susceptible to wind erosion owing to their coarse-textures and weak aggregation, yet studies are yet to describe the ability of soils to resist wind erosion in this region. Accordingly, this study aimed to quantify how soil wind erosion potential is affected by soil aggregate properties, such as dry aggregate geometric mean diameter (GMD), aggregate geometric standard deviation (GSD), aggregate stability, and soil bulk density, and to assess the effects of soil type, crop rotation, irrigation, fertilization, and tillage treatments on these aggregate properties in the main wind erosion area across the FPYR. Significant differences in GMD and aggregate stability were found between crop rotation treatments, whereas crop rotation marginally affected the soil bulk density. Further, the impact of management practices on aggregate properties differed for each soil type. The soil aggregate erodible fraction (EF) in the FPYR ranged from 1.14 to 82.73% across sites, with a mean of 26.14% across soil types and management practices, which was lower than that previously reported in other wind erosion regions. We incorporated these measured EFs into the Revised Wind Erosion Equation (RWEQ) to evaluate the wind erosion risk of the FPYR. The results indicated that the central FPYR was more susceptible to wind erosion than the other regions, although the total wind erosion potential in the FPYR was small. Adoption of soil conservation practices could help minimize wind erosion and improve atmospheric quality in the region.

Identifying the best tillage system to maintain soil properties and crop yields after Conservation Reserve Program grassland conversion

The Conservation Reserve Program (CRP) is a United.States of Americae government program that provides financial incentives to transition marginal croplands to permanent grass cover to conserve soil and water. Few studies have evaluated the best tillage system that maintains soil properties when converting CRP back to cropland. Our objective was to determine how converting CRP to cropland under different tillage practices after three years affects soil C (carbon) stocks, physical and chemical properties, and winter wheat (Triticum aestivium L.) and corn (Zea mays L.) grain yields after 4 yr. We also reviewed literature on the topic to compare previous results against our findings. This experiment was conducted in Sidney, NE, USA on CRP that was converted to production farmland through four tillage practices no-till (NT), disk-sweep (DS), plow-sweep (PS) and deep plow-sweep (DPS) in 2017 and planted to a wheat-corn-fallow rotation. Organic C stock was reduced by 6% in PS and 15% in DPS compared to CRP in the 0–10 cm depth but not in the 0–60 cm. Tillage practice did not affect grain yields in our study but had inconsistent effects according to previous literature. In the upper 10 cm, wet aggregate stability was reduced by 41% in DS, 51% in PS, and 58% in DPS, dry aggregate stability was reduced by 66% in NT, 71% in DS, 74% in PS and 77% in DPS, and plant available water was reduced by 45% in NT, 50% in DS, 39% in PS and 43% in DPS treatment relative to CRP. However, treatments had no effect on cumulative infiltration rate and bulk density. The use of DS or NT when converting CRP to cropland caused the least negative impacts on soil properties when CRP was converted to cropland in our study and in previous studies reported in the literature. Minimizing soil disturbance by reduced or no tillage maintained relevant soil properties 3 yr after CRP conversion to cropland.

Comparing impacts of corn residue removal and amelioration practices on soil properties after 3, 6, and 10 years

AbstractInformation on corn (Zea mays L.) residue removal and organic amendment additions to ameliorate removal effects on soil properties is limited. Thus, we compared impacts of corn residue removal at 59% and organic amendments (winter rye [Secale cereale L.]) cover crop and manure every other year at 24 Mg ha−1 on soil organic carbon (SOC) and physical properties after 10 years under irrigated no‐till continuous corn on a silt loam in the western US Corn Belt. We collected soil property data after 10 years and then compared it with earlier results from this experiment (3 and 6 years). Cover crop and manure amendments maintained SOC concentration, but no amelioration practice reduced SOC concentration (−15%) from 3 to 10 years when residues were annually removed in 0‐ to 5‐cm depth. Under residue retention, SOC concentration increased with time with largest increase (+41%) occurring under manure amelioration practice in the 0‐ to 5‐cm depth. Residue removal reduced soil wet aggregate stability by 34%, soil dry aggregate stability by 73%, bulk density by 6%, water content at −33 kPa matric potential by 14%, and plant available water by 17% after 10 years in the 0‐ to 5‐cm soil depth but did not affect infiltration rate. Cover crops increased wet aggregate stability (32%), but manure and cover crops had limited effects on other soil properties. Residue removal increased the susceptibility of the soil to erosion and reduced water retention and SOC after 3 years, but such effects were not fully offset by amendments.

Comprehensive Effect of Soil Particle Size Composition and Wind Speed on Dust Emission Efficiency

AbstractRecent studies have shown that the dust emission efficiency (Ed) of some soil surfaces undergoes changes with wind speed and that such changes are related to soil properties. Through wind tunnel experiments, we investigate the comprehensive effect of soil particle size composition (PSC) (both minimally and fully dispersed) and friction wind speed (u*) on Ed. Results show that Ed initially increases and then decreases as soil texture changes from fine to coarse, with intermediate‐textured soils having the highest Ed and the strongest dust emission ability. The ratio of silt to sand in soil is an index suitable for reflecting the influence of soil texture on Ed. The PSC of soil dry aggregate is a factor that directly determines Ed. With increasing u*, Ed tends to increase for coarse‐ and intermediate‐textured soils but not for fine‐textured soil, supporting the view that Ed is influenced by u* and that the influence is related to soil PSC. Despite the fitting power function equations between Ed and u* for some soils failing to pass the significance test in this study, the substantial influence of soil texture on the power exponents implies potential for establishing an equation capable of expressing the comprehensive effect of soil texture and u* on Ed.

Dynamic Nanocrystal Superlattices with Thermally Triggerable Lubricating Ligands.

The size-dependent and collective physical properties of nanocrystals (NCs) and their self-assembled superlattices (SLs) enable the study of mesoscale phenomena and the design of metamaterials for a broad range of applications. However, the limited mobility of NC building blocks in dried NCSLs often hampers the potential for employing postdeposition methods to produce high-quality NCSLs. In this study, we present tailored promesogenic ligands that exhibit a lubricating property akin to thermotropic liquid crystals. The lubricating ability of ligands is thermally triggerable, allowing the dry solid NC aggregates deposited on the substrates with poor ordering to be transformed into NCSLs with high crystallinity and preferred orientations. The interplay between the dynamic behavior of NCSLs and the molecular structure of the ligands is elucidated through a comprehensive analysis of their lubricating efficacy using both experimental and simulation approaches. Coarse-grained molecular dynamic modeling suggests that a shielding layer from mesogens prevents the interdigitation of ligand tails, facilitating the sliding between outer shells and consequently enhancing the mobility of NC building blocks. The dynamic organization of NCSLs can also be triggered with high spatial resolution by laser illumination. The principles, kinetics, and utility of lubricating ligands could be generalized to unlock stimuli-responsive metamaterials from NCSLs and contribute to the fabrication of NCSLs.

Long-term warming altered soil physical structure and soil organic carbon pools in wheatland field

Summary The impacts of long-term warming on soil physical structure and soil organic carbon (SOC) pools are currently disputed and uncertain. We conducted an eleven-year warming experiment in wheatland field in Henan, China. We found that long-term warming significantly increased soil bulk density by 4.5%, and significantly decreased total porosity and non-capillary porosity by 3.4% and 5.0%, respectively. Besides, long-term warming decreased the &gt;2 mm fraction proportion and increased &lt;0.053 mm fraction proportion of dry and wet aggregates. The mean weight diameter value for dry and wet aggregates in long-term warming treatment was significantly decreased by 7.0% and 6.7%, respectively. Moreover, long-term warming significantly decreased the total SOC, very labile pool (F1) and labile pool (F2) content by 10.6%, 30.6%, and 43.6%, and significantly increased the less labile pool (F3) and non-labile pool (F4) content by 94.2% and 21.1%, respectively. Long-term warming increased the passive carbon pool percentage but decreased the active carbon pool (ACP) percentage. Our results suggest that long-term warming negatively affected the soil's physical structure and impaired soil ACP accumulation. The findings of this study help improve our understanding of the response of farmland soils in northern China to climate change and provide scientific basis for establishing carbon management measures in farmland.

Soil management affects soil C and N stocks but not overall soil health

Soil health describes a soil’s capacity to function as a vital ecosystem that sustains plants, animals, and humans. It can be assessed by measuring specific soil physical, chemical, and biological parameters combined into a soil health index (SHI). The objective of this study was to evaluate the effect of management, depth, and their interaction on soil health indicators. We evaluated long-term continuous tillage, horticultural crop rotation, which had an antecedent tropical pumpkin/bean rotation, and a no-till avocado orchard in a Cumulic Haplustolls at the Juana Díaz Agricultural Experiment Substation. Soil samples were taken at 0 to 15, 15 to 30, 30 to 50, 50 to 75, and 75 to 100 cm intervals using a hydraulic probe. Soil pH, electrical conductivity, bulk density, dry stable aggregates, mean weight diameter, tensile strength, carbon and nitrogen stocks, and water content were quantified. The data were analyzed in a multivariate ANOVA. Results were classified considering threshold values, and an SHI score was determined based on the simple additive method. Our findings show that the no-till avocado orchard had better soil physicochemical qualities, including higher C and N stocks, but this did not lead to an improved SHI score when compared with the continuous tillage crop rotation plot. Soil depth, management, and their interaction were significant effects in both management systems with a score of 0.55 on the SHI scale. These results imply that, although overall soil health is not affected, increased C concentration, no-till, and perennials have a favorable effect on SHI indicators in horticultural systems in the San Antón series.

Group-fractional composition of humus in dry aggregates of weakly saline grass-meadow soils

Group-fractional composition of humus in dry aggregates of weakly saline grass-meadow soils

Effect of Mechanical Properties on Performance of Cold Mix Asphalt with Recycled Aggregates Incorporating Filler Additives

The utilization of recycled asphalt pavement in the construction and maintenance of flexible pavement with asphalt emulsion is advantageous and environmentally friendly. It saves energy due to zero heat loss during the mixing and laying of pavement compared to hot mix asphalt. Recycled asphalt pavement (RAP) is a sustainable material in place of virgin aggregates in road construction. The focus of this study is (i) virgin aggregate production, (ii) the utilization of waste material (additive), (iii) reducing the production temperature, and (iv) recycled RAP material in the pavement. This paper attempts to create a venue for using RAP greater than 50% during pavement construction. Cold mix asphalt (CMA) containing 0%, 50%, and 100% RAP materials with different dosages of cement, fly ash, and Stabil-road at 1%, 2%, and 3% of dry aggregate weight were used for ascertaining the mechanical and volumetric properties of mixtures. The mechanical properties for CMA samples, such as stability, tensile strength, moisture susceptibility, stiffness modulus, and the abrasion loss of CMA samples, were evaluated with and without RAP incorporation. Present laboratory studies revealed that a cold mix containing 50% RAP materials produced a higher stability value than the control mix, irrespective of the types of additives in its contents. All the additives can potentially resist moisture damage in the mix. Also, a significant improvement in the resilient modulus was considered for RAP-incorporated mixtures with the additives.

Effect of biochar and hydrochar of pistachio residues on physical quality indicators of a sandy loam soil

The carbonization of agricultural residues into carbon-rich biochars can be considered as one of the practical methods in sustainable management. The objectives of this study were to: (i) investigate and compare the chemical, physical and micromorphological properties of biochar and hydrochar produced from pistachio (Pistacia vera) residues, and (ii) compare the effects of these chars on the physical quality of a sandy loam soil (classified as Typic Haplocalcids) in pistachio orchards. The physical and chemical characteristics of the biochar and hydrochar were determined. Scanning electron microscopy images showed that hydrochar had a spherical pore structure while the biochar had elliptical pores. The chars were different in terms of functional groups, ratio of elemental composition, and electrical conductivity. Both chars were added at the rates of 0, 1 and 2%w/w to the soil and incubated for nine months under wet and dry cycles. Then, soil physical indicators including bulk density (ρb), dry and wet aggregate stability, water retention curve, saturated water content (θs), field capacity (θFC) and plant available water (PAW) were determined. The results showed that the hydrochar and biochar application had no significant effect on the ρb and dry aggregate stability. However, the percentage of water-stable aggregates larger than 0.25 mm increased at the rate of 1%w/w of chars in comparison with the control. The θs, θFC and PAW increased at both rates of chars when compared with the control. The residual water content (θr) increased at the rate of 1%w/w of chars compared to the untreated soil. It can be concluded that chars of pistachio residues can affect soil physical quality indicators and pore size distribution by the means of different mechanisms like the effect of morphological characteristics of chars, forming complexes between the soil particles, and creating hydrophobic coatings on the soil particles and aggregates.

Determination of Multicomponents in Rubi Fructus by Near-Infrared Spectroscopy Technique

Objective. Rubi Fructus (RF) is a dry aggregate fruit of Rubus (Rosaceae). It has shown significant pharmacological effects such as anti-oxidation, hypoglycemic, and anti-inflammatory. A combination of near-infrared (NIR) spectroscopy and partial least squares regression (PLSR) under seven different spectral data preprocessing techniques was used to determine the performance of quantitative analysis correction models which employed moisure, ellagic acid, and total flavonoids as indicators of RF. Methods. Ninety-seven different RF batches were collected for NIR spectra. By using primary analysis techniques such as drying method, high-performance liquid chromatography (HPLC), and ultraviolet visible spectrophotometry (UV-Vis), the contents of moisure, ellagic acid, and total flavonoids were determined. The NIR spectral data and the primary analysis method data were correlated through PLSR. Seven methods were used for pretreating the spectral data, including no spectral pretreatment, first derivative, standard normalized variate, multiple scattering corrections, elimination of constant offset, and minimum maximum normalization. The quantitative analysis correction models adopted PLSR chemometrics for moisture, ellagic acid and total flavonoids were developed, and their effectiveness was evaluated using the correlation coefficient (R), ratio of prediction to deviation (RPD), and root mean square error (RMSE). Results. The first derivative was combined with variable standardization, elimination of constant offset, and multiple scattering corrections, respectively, to pretreat the PLSR models for moisture, ellagic acid, and total flavonoids. The R-values of the PLSR models for moisture, ellagic acid, and total flavonoids were, respectively, 0.9788, 0.9468, and 0.9748, all of which were higher than 0.90, and the RPD values were 4.9, 3.1, and 4.5, respectively, which were all larger than 3.0. The RMSE ratios of the calibration set and the test set were 0.98, 0.94, and 1.0, respectively. Conclusion. The R-values of the NIR-PLSR models for moisture, ellagic acid, and total flavonoids are all greater than 0.90 after suitable pretreatments, indicating that the models are reliable. The RPD values are more than 3.0, which indicate that the models are good and useable for quality control. The RMSE ratios are closed to 1, indicating that the calibration set and test set had same distribution and the models were not overfitting indicating good predictability.

Some properties of thermal insulating cement mortar using Ponza aggregate

Abstract Lightweight aggregate (LWA) mortar is made using lightweight or low-density aggregate, which improves properties such as thermal insulation, durability for freezing and thawing, fire and temperature resistance, and sound insulation. This research aims to use lightweight fine aggregate obtained from crushing natural rocks that are locally called “Ponza” to produce LWA mortar with different mix proportions to study the possibility of using it to produce blocks that can be erected on the outer side of the walls of old buildings to provide good thermal insulation. It also presents a study about the internal curing property of the produced cement mortar, which comes from the absorbed water by the used surface-saturated dry Ponza aggregate. The process includes using three mix proportions (1:1, 1:0.7, and 1:0.5) by weight of cement: fine aggregate. The samples were cured by dividing them into five groups, including moist curing for 1, 3, 7, and 28 days and the fifth group was moist cured for 1 day and then covered by a thin layer of flan coat. Dry density, compressive strength, flexural strength, and thermal conductivity for ages (7, 28, and 56 days) have been tested. The findings indicate that it is possible to produce thermal insulating lightweight cement mortar with mixtures of 1:0.7 or 1:0.5 cement to LWA, using Ponza aggregate, since the results showed an acceptable range of compressive and flexural strengths reaching about 14.75 and 2.91 MPa, respectively, a bulk density of less than 1,600 kg/mm3, and a lower thermal conductivity than many building materials.

The Relationships between Root Traits and the Soil Erodibility of Farmland Shelterbelts in the Bashang Region of China

Soil erodibility by wind is not only affected by the basic physical and chemical properties of the soil but also the functional traits of plant roots. However, the roles played by the morphological and architectural traits of plant roots on wind-based soil erodibility in the Bashang region of China are still unclear. Therefore, two typical tree shelterbelts and two shrub shelterbelts in the Bashang region were selected to assess and determine how the root traits affected soil erodibility, especially characteristics such as dry aggregate, soil organic matter, and shearing resistance. The results showed that the soil dry aggregates of the two shrubs (Lycium barbarum and Caragana korshinskii) had higher geometric mean diameters (0.40 ± 0.03 mm) and mean weight diameters (0.82 ± 0.08 mm) but a lower erodible fraction (81.81% ± 1.62%) compared to the two trees (Populus simonii and Ulmus pumila). The mean weight diameter (MWDd) and geometric mean diameter (GMDd) of dry soil aggregates were negatively correlated with the soil erodible fraction (EFd), but these parameters were positively correlated with shearing resistances. The specific root length (SRL) and surface area (SSA) of plant roots were positively correlated with the GMDd of the soils, though these two parameters negatively correlated with the soil erodible fraction. The root branching intensity (BI) was negatively correlated with the MWDd and GMDd of dry soil aggregates. The total carbon or nitrogen of the soil displayed significantly positive and negative correlations to the geometric mean diameters and erodible fractions of the soils, respectively. The findings showed that plant roots with higher SRLs, as well as lower root diameters and BIs, played positive key roles in soil stability. The same applied to soils with higher nitrogen, carbon, and water content. The results from this study suggest that L. barbarum is superior to the other three species based on root traits and wind erosion resistance. These findings provide critical information for selecting plants for the sustainable management of windbreak and sand fixation.

Effect of Aggregate Proportion and Skeleton on the Strength of Porous Asphalt Mix

Investigating the skeleton behaviour of dry aggregates and the characteristics Of Indirect Tensile Strength (ITS) of various open-graded bands is the prime focus of this study. The skeleton band has an impact on mechanical characteristics. To make porous asphalt mixes’ skeletal strength greater, aggregate proportion studies are necessary before evaluating its performance. So, the current research on how the gradation band behaves concerning aggregate proportions is studied in this paper. The coarse and fine aggregate percentages on the gradation that affect tensile strength values vary in this paper. The coarse content effect on the ITS value lower side and fine proportion on the gradation significantly affect and indicates the compacted sample’s binding property. In this paper, different couple conditions also effect the ITS values. The porous asphalt mixture’s main mote is to improve air void content and drainage facility while improving durability and strength parameters.

Wetting-drying durability performance of cement-stabilized recycled materials and lateritic soil using natural rubber latex

This research was conducted to assess the role of natural rubber latex (NRL) in improving the durability of cement stabilized lateritic soil and recycled materials blends against wetting–drying (w-d) cycles. 70% and 50% by weight of recycled materials, including steel slag (SS) and recycled concrete aggregate (RCA) were replaced for Lateritic soil (LS) and 5% cement by weight of dry aggregate was used in this research. The dry NRL to cement (r/c) ratios of 0%, 3%, 5%, and 10% were the influence factor that were investigated. The unconfined compressive strength (UCS), physical and weight loss, water absorption, and microstructural analysis were performed to evaluate the influence of NRL on the durability of cement-NRL stabilized SS:LS and RCA:LS by comparison with those of control cement-stabilized mixtures (without NRL). The results indicated that the UCS development of all mixtures was found to be similar in that the UCS value increased up to the third w-d cycle and gradually decreased thereafter. The microstructural analysis result indicated that the increase of UCS during the w-d cycles can be attributed to the high temperature, which promotes the moisture diffusivity of cementitious materials and thus increases chemical reaction and strength development. However, with further increase of w-d cycles, the strength reduction was attributed to the Ca2+ leaching from the cement-stabilized materials during the soaking stages and the dissolution of cementitious products. In addition, the crack propagation and extension gradually caused the crumbling of samples and microcracks, resulting in the deterioration and strength loss of samples. It was evident that the formation of the NRL films filled up the pore spaces and microcrack, acting as NRL film crack-bridging mechanism, resulting in the enhanced interparticle bonding strength and durability.