Double-layered Particles Research Articles

The Role of the Host Cytoskeleton in the Formation and Dynamics of Rotavirus Viroplasms.

Rotavirus (RV) replicates within viroplasms, membraneless electron-dense globular cytosolic inclusions with liquid-liquid phase properties. In these structures occur the virus transcription, replication, and packaging of the virus genome in newly assembled double-layered particles. The viroplasms are composed of virus proteins (NSP2, NSP5, NSP4, VP1, VP2, VP3, and VP6), single- and double-stranded virus RNAs, and host components such as microtubules, perilipin-1, and chaperonins. The formation, coalescence, maintenance, and perinuclear localization of viroplasms rely on their association with the cytoskeleton. A stabilized microtubule network involving microtubules and kinesin Eg5 and dynein molecular motors is associated with NSP5, NSP2, and VP2, facilitating dynamic processes such as viroplasm coalescence and perinuclear localization. Key post-translation modifications, particularly phosphorylation events of RV proteins NSP5 and NSP2, play pivotal roles in orchestrating these interactions. Actin filaments also contribute, triggering the formation of the viroplasms through the association of soluble cytosolic VP4 with actin and the molecular motor myosin. This review explores the evolving understanding of RV replication, emphasizing the host requirements essential for viroplasm formation and highlighting their dynamic interplay within the host cell.

Cryo-EM structures of Banna virus in multiple states reveal stepwise detachment of viral spikes

Banna virus (BAV) is the prototype Seadornavirus, a class of reoviruses for which there has been little structural study. Here, we report atomic cryo-EM structures of three states of BAV virions—surrounded by 120 spikes (full virions), 60 spikes (partial virions), or no spikes (cores). BAV cores are double-layered particles similar to the cores of other non-turreted reoviruses, except for an additional protein component in the outer capsid shell, VP10. VP10 was identified to be a cementing protein that plays a pivotal role in the assembly of BAV virions by directly interacting with VP2 (inner capsid), VP8 (outer capsid), and VP4 (spike). Viral spikes (VP4/VP9 heterohexamers) are situated on top of VP10 molecules in full or partial virions. Asymmetrical electrostatic interactions between VP10 monomers and VP4 trimers are disrupted by high pH treatment, which is thus a simple way to produce BAV cores. Low pH treatment of BAV virions removes only the flexible receptor binding protein VP9 and triggers significant conformational changes in the membrane penetration protein VP4. BAV virions adopt distinct spatial organization of their surface proteins compared with other well-studied reoviruses, suggesting that BAV may have a unique mechanism of penetration of cellular endomembranes.

Rotavirus Particle Disassembly and Assembly In Vivo and In Vitro.

Rotaviruses (RVs) are non-enveloped multilayered dsRNA viruses that are major etiologic agents of diarrheal disease in humans and in the young in a large number of animal species. The viral particle is composed of three different protein layers that enclose the segmented dsRNA genome and the transcriptional complexes. Each layer defines a unique subparticle that is associated with a different phase of the replication cycle. Thus, while single- and double-layered particles are associated with the intracellular processes of selective packaging, genome replication, and transcription, the viral machinery necessary for entry is located in the third layer. This modular nature of its particle allows rotaviruses to control its replication cycle by the disassembly and assembly of its structural proteins. In this review, we examine the significant advances in structural, molecular, and cellular RV biology that have contributed during the last few years to illuminating the intricate details of the RV particle disassembly and assembly processes.

Spontaneous Interconversion between Different Narrowly Defined Shapes of Rotavirus Double-Layered Particles Studied in Real Time by High-Resolution Mobility Analysis.

Rotavirus double-layered particles (DLPs) are studied in the gas phase with a high-resolution differential mobility analyzer (DMA). DLPs were transferred to 10 mM aqueous ammonium acetate, electrosprayed into the gas phase, converted into primarily singly charged particles, and DMA-analyzed. Up to seven slightly different conformations were resolved, whose apparently random, fast (minutes), and reversible interconversions were followed in real time. They sometimes evolved into just two distinct structures, with periods of one dominating over the other and vice versa. Differences between the DLP structures in solution and in the gas phase are clearly revealed by the smaller DLP diameter found here (60 versus 70 nm). Nevertheless, we argue that the multiple gas-phase conformers observed originate in as many conformations pre-existing in solution. We further hypothesize that these conformers correspond to incomplete DLPs having lost some of the VP6 trimer quintets surrounding each of the 12 5-fold axes. Instances of this peculiar loss have been previously documented by cryoelectron microscopy for the rotavirus Wa strain, as well as via charge detection mass spectrometry for five other rotavirus strains included in the RotaTec vaccine. Evidence of this loss systematically found for all 7 rotavirus types so far studied in aqueous ammonium acetate may be a special feature of this electrolyte.

A high resolution differential mobility analyzer for the study of large virus particles

The conical inner electrode of a recently described differential mobility analyzer (DMA), covering at resolution >50 the size range up to 60 nm, has been modified by increasing its radius at the outlet slit from 1 cm to 1.6 cm, and decreasing its convergence angle from 3° to 0.5°. The cylindrical outer electrode radius is maintained at 2 cm, while other critical dimensions are only slightly modified. The classification voltage for fixed flow rate of sheath gas and particle diameter decreases almost fourfold, extending the size range theoretically spanned at high resolution well beyond 120 nm. Tests with multiply charged polystyrene latex spheres 200 nm in diameter confirm the actual ability to cover this wide size range. A resolution above 100 (with no corrections for instrument or particle nonidealities) is demonstrated with rotavirus double-layered particles (DLP) whose mobility diameter is found to be near 60 nm. The DLP has several configurations that complicate its use for DMA characterization, but occasionally presents mainly one conformer, with singularly narrow relative mobility width FWHM < 1/150. Two broad range instruments with slightly different axial lengths have been developed and tested, both reaching resolving powers of 100.

Low-dose phase retrieval of biological specimens using cryo-electron ptychography

Cryo-electron microscopy is an essential tool for high-resolution structural studies of biological systems. This method relies on the use of phase contrast imaging at high defocus to improve information transfer at low spatial frequencies at the expense of higher spatial frequencies. Here we demonstrate that electron ptychography can recover the phase of the specimen with continuous information transfer across a wide range of the spatial frequency spectrum, with improved transfer at lower spatial frequencies, and as such is more efficient for phase recovery than conventional phase contrast imaging. We further show that the method can be used to study frozen-hydrated specimens of rotavirus double-layered particles and HIV-1 virus-like particles under low-dose conditions (5.7 e/Å2) and heterogeneous objects in an Adenovirus-infected cell over large fields of view (1.14 × 1.14 μm), thus making it suitable for studies of many biologically important structures.

Whole genome sequence analysis of cell culture-adapted rotavirus A strains from chicken

Rotavirus A (RVA) is a major cause of gastroenteritis in humans and mammalian animals, and has also been abundantly detected in avian species. Avian RVA infection is associated with diarrhea, reduced growth and increased mortality, leading to economic losses in the poultry industry. Avian RVA forms a unique genetic clade within the whole RVA species. However, up to now, only a few full-length avian RVA genomes have been published and only a small number of avian RVA strains have been adapted to grow in cell culture for subsequent studies.Here, the four cell culture-adapted chicken RVA strains 02V0002G3, 04V0027G6, 05V0500F6 and 06V0661G1 were characterized in more detail. Transmission electron microscopy of the viruses derived from culture supernatant showed a typical triple-layered morphology of rotavirus particles; in addition, strain 06V0661G1 showed a high proportion of double-layered particles. The (nearly) complete genome sequences of the viruses were determined using next-generation sequencing (NGS). The resulting sequences were compared to full-length or partial sequences of the strains previously determined using Sanger sequencing; and a few nucleotide mismatches, some of them resulting in amino acid substitutions, were identified. The genomes of strains 02V0002G3, 04V0027G6 and 05V0500F6 were closely related to each other showing a G19-P[30]-I11-R6-C6-M7-A16-N6-T8-E10-H8 genotype constellation. Strain 06V0661G1 carries the VP4 genotype P[31] in the same genetic backbone like the other strains. However, further sequence analysis showed that the genes of this strain, especially that encoding NSP3, clustered more separately from the other strains in phylogenetic trees.The characterized cell culture-adapted chicken RVA strains may be useful for future studies investigating genetic diversity and replication of avian rotaviruses, as well as for the development of vaccines and diagnostic tools.

The Guanine Nucleotide Exchange Factor GBF1 Participates in Rotavirus Replication.

Cellular and viral factors participate in the replication cycle of rotavirus. We report that the guanine nucleotide exchange factor GBF1, which activates the small GTPase Arf1 to induce COPI transport processes, is required for rotavirus replication since knocking down GBF1 expression by RNA interference or inhibiting its activity by treatment with brefeldin A (BFA) or Golgicide A (GCA) significantly reduces the yield of infectious viral progeny. This reduction in virus yield was related to a block in virus assembly, since in the presence of either BFA or GCA, the assembly of infectious mature triple-layered virions was significantly prevented and only double-layered particles were detected. We report that the catalytic activity of GBF1, but not the activation of Arf1, is essential for the assembly of the outer capsid of rotavirus. We show that both BFA and GCA, as well as interfering with the synthesis of GBF1, alter the electrophoretic mobility of glycoproteins VP7 and NSP4 and block the trimerization of the virus surface protein VP7, a step required for its incorporation into virus particles. Although a posttranslational modification of VP7 (other than glycosylation) could be related to the lack of trimerization, we found that NSP4 might also be involved in this process, since knocking down its expression reduces VP7 trimerization. In support, recombinant VP7 protein overexpressed in transfected cells formed trimers only when cotransfected with NSP4.IMPORTANCE Rotavirus, a member of the family Reoviridae, is the major cause of severe diarrhea in children and young animals worldwide. Despite significant advances in the characterization of the biology of this virus, the mechanisms involved in morphogenesis of the virus particle are still poorly understood. In this work, we show that the guanine nucleotide exchange factor GBF1, relevant for COPI/Arf1-mediated cellular vesicular transport, participates in the replication cycle of the virus, influencing the correct processing of viral glycoproteins VP7 and NSP4 and the assembly of the virus surface proteins VP7 and VP4.

The influence of drug solubility and sampling frequency on metformin and glibenclamide release from double-layered particles: experimental analysis and mathematical modelling

Co-axial electrohydrodynamic atomization was used to prepare core/shell polymethylsilsesquioxane particles for co-delivery of metformin and glibenclamide in a sustained release manner. The drug-loaded microparticles were mostly spherical and uniformly distributed in size, with average diameters between 3 and 5 µm across various batches. FTIR was used to confirm the presence of drugs within the particles while X-ray diffraction studies revealed drugs encapsulated existed predominantly in the amorphous state. Intended as systems that potentially can act as depot formulations for long-term release of antidiabetics, a detailed analysis of drug release from these particles was necessary. Drugs of different solubilities were selected in order to study the effects of drug solubility from a core/shell particle system. Further analyses to determine how conditions such as release into a limited volume of media, sampling rate and partitioning of drug between the core and shell layers influenced drug release were conducted by comparing experimental and mathematically modelled outcomes. It was found that while the solubility of drug may affect release from such systems, rate of removal of drug (sampling frequency) which upsets local equilibrium at the particle/solution interface prompting a rapid release to redress the equilibrium influenced release more.

Rotavirus Replication: Gaps of Knowledge on Virus Entry and Morphogenesis.

In 1973, rotaviruses A (RVAs) were discovered as major causative agents of acute gastroenteritis in infants and young children worldwide. The infectious RV virion is an icosahedral particle composed of three concentric protein layers surrounding the 11 double-stranded (dsRNA) segments. An in vitro replication system for RVs in permanent cell lines was developed in 1982 and expanded to replication in intestinal organoids in 2015. However, the details of rotavirus (RV) entry into cells and particle maturation mechanisms at the molecular level remain incompletely understood. Slowing down human RVA replication in cell culture on ice allowed morphological visualization of virus particle entry and the assembly of triple-layered particles (virion). Although RVAs are non-enveloped viruses, after virus attachment to the cell membrane, the virus enters the cell by perforating the plasma membrane by a fusion mechanism involving VP5* of the cleaved VP4 protein, as the alternative virus entry route besides the receptor-mediated endocytosis which is generally accepted. After assembling double-layered particles (DLPs) in viroplasm or cytoplasm, they appear to be connected with the endoplasmic reticulum (ER) membrane and become coated with outer capsid proteins (VP4 and VP7) in a coating process. The perforation of the ER membrane is caused by an unknown mechanism following interaction between non-structural protein 4 (NSP4) and the inner capsid protein VP6 of the DLPs. The coating process is closely related to the formation of a hetero-oligomeric complex (NSP4, VP4 and VP7). These lines of evidence suggest the existence of novel mechanisms of RV morphogenesis.

Preparation and the adsorption ability of thiolated magnetic core-shell Fe3O4@SiO2@C-SH for removing Hg2+ in water solution

A thiolated magnetic double-layered core-shell particles Fe3O4@SiO2@C-SH is synthesized and characterized. The application in Hg2+ removal is discussed. The removal can finished in 10 min with high efficiency, and the maximum adsorption capacity is 184.00 mg/g. The adsorption fits the Freundlich adsorption isotherm and the adsorption kinetic is the second-order kinetic. Through Dubinin-Radushkevich (D-R) isothermal adsorption analysis, it is found the adsorption for Hg2+ is mainly physical adsorption, accompanied by chemical one. The method provides a new way for designing double-layered materials aiming to remove heavy metal in waste water.

Improving the Strength of the ZrC-SiC and TC4 Brazed Joint Through Fabricating Graded Double-Layered Composite Structure on TC4 Surface

In order to improve the ZrC-SiC ceramic and TC4 brazed joint property, graded double-layered SiC particles (SiCp)-reinforced TC4-based composite structure (named as GLS for convenience) was designed to relieve the residual stress in the joint. The GLS was successfully fabricated on TC4 substrate by double-layered laser deposition technology before the brazing process. The investigation of the GLS shows that the volume fraction of SiCp in the two composite layers was graded (20 and 39 vol pct, respectively). Ti5Si3 and TiC phases formed in the GLS due to the reaction of SiCp and TC4. The laser power-II (the laser power for the second deposition layer) affected the microstructure of the GLS significantly. Increasing the laser power-II would promote the reaction between the SiCp and TC4. But the high laser power-II made the layer I remelt completely and the two layers became homogeneous rather than graded structure. In the ZrC-SiC and TC4 brazed joint, the CTE (coefficient of thermal expansion) was graded from the TC4 to the ZrC-SiC due to the GLS, and the strength of the joint with the GLS (91 MPa) was higher than that without the GLS (43 MPa).

Actin-Dependent Nonlytic Rotavirus Exit and Infectious Virus Morphogenetic Pathway in Nonpolarized Cells.

During the late stages of rotavirus morphogenesis, the surface proteins VP4 and VP7 are assembled onto the previously structured double-layered virus particles to yield a triple-layered, mature infectious virus. The current model for the assembly of the outer capsid is that it occurs within the lumen of the endoplasmic reticulum. However, it has been shown that VP4 and infectious virus associate with lipid rafts, suggesting that the final assembly of the rotavirus spike protein VP4 involves a post-endoplasmic reticulum event. In this work, we found that the actin inhibitor jasplakinolide blocks the cell egress of rotavirus from nonpolarized MA104 cells at early times of infection, when there is still no evidence of cell lysis. These findings contrast with the traditional assumption that rotavirus is released from nonpolarized cells by a nonspecific mechanism when the cell integrity is lost. Inspection of the virus present in the extracellular medium by use of density flotation gradients revealed that a fraction of the released virus is associated with low-density membranous structures. Furthermore, the intracellular localization of VP4, its interaction with lipid rafts, and its targeting to the cell surface were shown to be prevented by jasplakinolide, implying a role for actin in these processes. Finally, the VP4 present at the plasma membrane was shown to be incorporated into the extracellular infectious virus, suggesting the existence of a novel pathway for the assembly of the rotavirus spike protein.IMPORTANCE Rotavirus is a major etiological agent of infantile acute severe diarrhea. It is a nonenveloped virus formed by three concentric layers of protein. The early stages of rotavirus replication, including cell attachment and entry, synthesis and translation of viral mRNAs, replication of the genomic double-stranded RNA (dsRNA), and the assembly of double-layered viral particles, have been studied widely. However, the mechanisms involved in the later stages of infection, i.e., viral particle maturation and cell exit, are less well characterized. It has been assumed historically that rotavirus exits nonpolarized cells following cell lysis. In this work, we show that the virus exits cells by a nonlytic, actin-dependent mechanism, and most importantly, we describe that VP4, the spike protein of the virus, is present on the cell surface and is incorporated into mature, infectious virus, indicating a novel pathway for the assembly of this protein.

Identification of a Small Molecule That Compromises the Structural Integrity of Viroplasms and Rotavirus Double-Layered Particles.

Despite the availability of two attenuated vaccines, rotavirus (RV) gastroenteritis remains an important cause of mortality among children in developing countries, causing about 215,000 infant deaths annually. Currently, there are no specific antiviral therapies available. RV is a nonenveloped virus with a segmented double-stranded RNA genome. Viral genome replication and assembly of transcriptionally active double-layered particles (DLPs) take place in cytoplasmic viral structures called viroplasms. In this study, we describe strong impairment of the early stages of RV replication induced by a small molecule known as an RNA polymerase III inhibitor, ML-60218 (ML). This compound was found to disrupt already assembled viroplasms and to hamper the formation of new ones without the need for de novo transcription of cellular RNAs. This phenotype was correlated with a reduction in accumulated viral proteins and newly made viral genome segments, disappearance of the hyperphosphorylated isoforms of the viroplasm-resident protein NSP5, and inhibition of infectious progeny virus production. In in vitro transcription assays with purified DLPs, ML showed dose-dependent inhibitory activity, indicating the viral nature of its target. ML was found to interfere with the formation of higher-order structures of VP6, the protein forming the DLP outer layer, without compromising its ability to trimerize. Electron microscopy of ML-treated DLPs showed dose-dependent structural damage. Our data suggest that interactions between VP6 trimers are essential, not only for DLP stability, but also for the structural integrity of viroplasms in infected cells.IMPORTANCE Rotavirus gastroenteritis is responsible for a large number of infant deaths in developing countries. Unfortunately, in the countries where effective vaccines are urgently needed, the efficacy of the available vaccines is particularly low. Therefore, the development of antivirals is an important goal, as they might complement the available vaccines or represent an alternative option. Moreover, they may be decisive in fighting the acute phase of infection. This work describes the inhibitory effect on rotavirus replication of a small molecule initially reported as an RNA polymerase III inhibitor. The molecule is the first chemical compound identified that is able to disrupt viroplasms, the viral replication machinery, and to compromise the stability of DLPs by targeting the viral protein VP6. This molecule thus represents a starting point in the development of more potent and less cytotoxic compounds against rotavirus infection.

One step preparation of spherical drug particles by contamination-free dry milling technique with corn starch beads

The novel dry milling technique has been developed by using a mechanical powder processor for improving the dissolution properties of poorly water-soluble drugs. It was found that the drug crystals were well pulverized by co-processing with fine particles of corn starch (CS). The morphological observation and particle size evaluation revealed that the processed products formed the composite particles with ordered-mixed structure, having double-layered particles with a core of CS and a coating layer of phenytoin (Phe), as a model drug. This result suggested that the drug crystals were selectively micronized and the resultant miniaturized Phe particles were adhered/fixed on the surface of un-milled CS particles. The mechanical characteristics detected by the indentation test assumed that the brittle Phe crystals sandwiched between elastic CS particles would be successfully crushed down by high shearing stress in the processor. The newly-established dispersion-sedimentation test indicated that the fine Phe particles were immediately detached from the composite particles in aqueous phase, constructing the suspension. The dissolution behavior from the processed particles was found to be improved and strongly dependent on the size and amount of detached Phe particles. Such milling and ordered-mixturization have been also successfully done by using recrystallized larger Phe particles than 100μm. These results would propose the contamination-free dry milling technique without using hard milling balls or beads. The mechanism of the current milling and ordered-mixing phenomena is also provided in this report.

The interaction of Rotavirus A pig/China/NMTL/2008/G9P[23] VP6 with cellular beta-actin is required for optimal RV replication and infectivity

VP6 forms the intermediate layer of the rotavirus (RV) capsid, and it plays important roles after RV penetration and uncoating. These functions rely on its ability to interact with host cell proteins. To gain further insights into the role of VP6 in porcine RV (PoRV) infection, a glutathione S-transferase pull-down assay was utilized to find unknown cellular factors that interact with VP6. In this study, beta-actin, tropomyosin 1, and 40S ribosomal protein S16 were identified as interaction partners of VP6 by mass spectrometry and co-immunoprecipitation. The interaction with beta-actin was further studied. By immunoelectron microscopy, we observed VP6 proteins that labeled with colloidal gold localized on the actin microfilaments at the early stage of PoRV infection, we also found VP6 distributed in the ribosome, mitochondria, endoplasmic reticulum and nucleus in the infected cells. Actin binding protein spin-down assays verified PoRV double-layered particles (DLPs) bound to F-actin in vitro, but didn’t have actin polymerization enhancement activity. After a small interfering RNA (siACTB) was used to knock down beta-actin expression, PoRV VP6 expression and the infection rates of newly synthesized virions releasing into culture supernatants decreased dramatically. Our results confirm and extend previous reports indicating that the interaction between PoRV VP6 and beta-actin plays vital roles in the PoRV lifecycle.

High-dimensional immune profiling of total and rotavirus VP6-specific intestinal and circulating B cells by mass cytometry.

In-depth phenotyping of human intestinal antibody secreting cells (ASCs) and their precursors is important for developing improved mucosal vaccines. We used single-cell mass cytometry to simultaneously analyze 34 differentiation and trafficking markers on intestinal and circulating B cells. In addition, we labeled rotavirus double-layered particles with a metal isotope and characterized B cells specific to the rotavirus VP6 major structural protein. We describe the heterogeneity of the intestinal B cell compartment, dominated by ASCs with some phenotypic and transcriptional characteristics of long-lived plasma cells. Using principal component analysis, we visualized the phenotypic relationships between major B cell subsets in the intestine and blood, and revealed that IgM+ memory B cells (MBCs) and naïve B cells were phenotypically related as were CD27− MBCs and switched MBCs. ASCs in the intestine and blood were highly clonally related, but associated with distinct trajectories of phenotypic development. VP6-specific B cells were present among diverse B cell subsets in immune donors, including naïve B cells, with phenotypes representative of the overall B cell pool. These data provide a high dimensional view of intestinal B cells and the determinants regulating humoral memory to a ubiquitous, mucosal pathogen at steady-state.

A Non-Symmetric Reconstruction Technique for Transcriptionally-Active Viral Assemblies.

The molecular mechanisms by which RNA viruses coordinate their transcriptional activities are not fully understood. For rotavirus, an important pediatric gastroenteric pathogen, transcription occurs within a double-layered particle that encloses the viral genome. To date, there remains very little structural information available for actively-transcribing rotavirus double-layered particles, which could provide new insights for antiviral development. To improve our vision of these viral assemblies, we developed a new combinatorial strategy that utilizes currently available high-resolution image processing tools. First, we employed a 3D classification routine that allowed us to sort transcriptionally-active rotavirus assemblies on the basis of their internal density. Next, we implemented an additional 3D refinement procedure using the most active class of DLPs. For comparison, the refined structures were computed in parallel by (1) enforcing icosahedral symmetry, and by (2) using no symmetry operators. Comparing the resulting structures, we were able to visualize the continuum that exists between viral capsid proteins and the viral RNA for the first time.

Double-layered rotavirus-like particles are efficient carriers to elicit strong CTL responses to delivered heterologous antigens

The first 92 amino acids of VP2 of rotavirus are dispensable for VLP assembly and can be replaced by heterologous reporter proteins without affecting either self-assembly of chimeric VP2 or the interaction with VP6 to render chimeric VP2/6 VLPs. In this study, we constructed recombinant baculoviruses expressing GFP or OVA fused to the amino terminus of a truncated VP2 sequence and produced chimeric VLPs by co-infection with a baculovirus expressing VP6. The results showed that these chimeric VLPs were efficiently uptaken by murine dendritic cells and that the heterologous sequences contained in the core of these VLPs seemed to be able to reach the MHC-I pathway as they elicited strong and specific CTL responses. Therefore, the data presented here suggest that chimeric VLPs could be used as excellent carriers to elicit CTL responses to antigens transported inside the VLPs.

Characterization and Transferring of Human Rotavirus Double-Layered Particles in MA104 Cells.

Background:Rotavirus (RV) is a major cause of gastroenteritis in infants and children and is one of the most severe public health problems. Rotaviruses outer layer contains two proteins including VP4 and VP7. These proteins are necessary for host-cell binding and penetration. TLP (triple layer virus particle) of RV is a complete infectious virion that binds to the target cells and internalized at the cytoplasm. The DLP (double layer virus particle) is a non-infectious particle that is formed through exclusion of the outer layer proteins including VP4 and VP7. These DLPs are the transcriptionally active forms of rotavirus.Objectives:The aim of this study was to transfer DLP of RV into cytoplasm of MA104 cells by Lipofectamine and to analyze their replication.Materials and Methods:Initially, rotavirus was purified by CsCl discontinuous gradient and DLP was separated from TLP based on density differences. For confirmation, sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) of the proteins were conducted Then the purified DLP of RV was transferred into MA104 cells using Lipofectamine.Results:We attempt to avoid the attachment and entry of the rotavirus by using Lipofectamine to mediate the delivery of viral particles directly into the cytoplasm. DLP was endocytosed into the cytoplasm following treatment by Lipofectamine and then replicated in cytoplasm.Conclusions:Therefore the non-infectious DLPs were became infectious if introduced into the cytoplasm of permissive and cancerous cells, without passing attachment and entry process.