Double Emulsion Solvent Evaporation Research Articles

RABV antigenic peptide loaded polymeric nanoparticle production, characterization, and preliminary investigation of its biological activity.

Nanoparticle-based antigen carrier systems have become a significant area of research with the advancement of nanotechnology. Biodegradable polymers have emerged as particularly promising carrier vehicles due to their ability to address the limitations of existing vaccine systems. In this study, we successfully encapsulated the G5-24 linear peptide, located between amino acids 253 and 275 in the primary sequence of the rabies virus G protein, into biodegradable and biocompatible PLGA copolymer using the double emulsion solvent evaporation method. The resulting nanoparticles had a size of approximately 230.9 ± 0.9074 nm, with a PDI value of 0.168 ± 0.017 and a zeta potential value of -9.86 ± 0.132 mV. SEM images confirmed that the synthesized nanoparticles were uniform in size and distribution. Additionally, FTIR spectra indicated successful peptide loading into the nanoparticles. The encapsulation efficiency of the peptide-loaded nanoparticles was 73.3%, with a peptide loading capacity of 48.2% and a reaction yield of 30.4%. Peptide release studies demonstrated that 65.55% of the peptide was released in a controlled manner over 28 days, following a "biphasic burst release" profile consistent with the degradation profile of PLGA. This controlled release is particularly beneficial for vaccine studies. Cytotoxicity tests revealed that the R-NP formulation did not induce cytotoxicity in fibroblast cells and enhanced NO production in macrophages, indicating its potential for vaccine development.

Basil seed mucilage as a bioadhesive polymer: Development of naproxen sodium microspheres and suppositories with in-vitro and ex-vivo studies

Background and purpose: The study explores basil seed mucilage as a bioadhesive carrier for naproxen sodium, demonstrating its ability to enhance solubility when administered rectally. The mucilage, derived from Ocimum basilicum seeds, showed bioadhesive properties and thermal stability, as confirmed by FTIR spectroscopy and X-ray diffraction analysis. Experimental approach: Microspheres were prepared using a double emulsion solvent evaporation technique, varying polymer ratios to optimize drug delivery. Key results: Particle size analysis revealed a range of 456±0.51 to 712±0.21 µm, with larger microspheres formed at higher mucilage concentrations due to increased viscosity. Encapsulation efficiency ranged from 45.01±0.25 % to 79.4±0.93 %, improving with higher basil/alginate ratios. The superior batch, OBM5, showed excellent mucoadhesive qualities in ex-vivo assays, attributed to the increased polymer content, facilitating interaction with rectal mucosa. SEM analysis of OBM5 indicated a spherical, monolithic structure conducive to free flow. Drug release was efficient, with OBM5 achieving 88.7±1.3 % after 7 hours, indicating a control­led release profile. Conclusion: Incorporated into polyethylene glycol (PEG) 4000 suppositories, suppose­tories were completely disintegrated in buffer solution within 25 minutes. The bioadhesive force of basil seed mucilage on rectal mucosa was significantly enhanced, reaching 6.44±0.58 g, correlating with mucilage concentration. These findings underscore the efficacy of basil seed mucilage as a bioadhesive biopolymer for rectal drug delivery systems.

Nanospheres as the delivery vehicle: novel application of Toxoplasma gondii ribosomal protein S2 in PLGA and chitosan nanospheres against acute toxoplasmosis

Toxoplasma gondii (T. gondii) is a zoonotic disease that poses great harm to humans and animals. So far, no effective T. gondii vaccine has been developed to provide fully protection against such parasites. Recently, numerous researches have focused on the use of poly-lactic-co-glycolic acid (PLGA) and chitosan (CS) for the vaccines against T. gondii infections. In this study, we employed PLGA and CS as the vehicles for T. gondii ribosome protein (TgRPS2) delivery. TgRPS2-PLGA and TgRPS2-CS nanospheres were synthesized by double emulsion solvent evaporation and ionic gelation technique as the nano vaccines. Before immunization in animals, the release efficacy and toxicity of the synthesized nanospheres were evaluated in vitro. Then, ICR mice were immunized intramuscularly, and immune protections of the synthesized nanospheres were assessed. The results showed that TgRPS2-PLGA and TgRPS2-CS nanospheres could induce higher levels of IgG and cytokines, activate dendritic cells, and promote the expression of histocompatibility complexes. The splenic lymphocyte proliferation and the enhancement in the proportion of CD4+ and CD8+ T lymphocytes were also observed in immunized animals. In addition, two types of nanospheres could significantly inhabit the replications of T. gondii in cardiac muscles and spleen tissues. All these obtained results in this study demonstrated that the TgRPS2 protein delivered by PLGA or CS nanospheres provided satisfactory immunoprotective effects in resisting T. gondii, and such formulations illustrated potential as prospective preventive agents for toxoplasmosis.

Optimization and evaluation of a chitosan-coated PLGA nanocarrier for mucosal delivery of Porphyromonas gingivalis antigens

Recent advances in understanding Alzheimer's disease (AD) suggest the possibility of an infectious etiology, with Porphyromonas gingivalis emerging as a prime suspect in contributing to AD. P. gingivalis may invade systemic circulation via weakened oral/intestinal barriers and then cross the blood-brain barrier (BBB), reaching the brain and precipitating AD pathology. Based on the proposed links between P. gingivalis and AD, a prospective approach is the development of an oral nanovaccine containing P. gingivalis antigens for mucosal delivery. Targeting the gut-associated lymphoid tissue (GALT), the nanovaccine may elicit both mucosal and systemic immunity, thereby hampering P. gingivalis ability to breach the oral/intestinal barriers and the BBB, respectively.The present study describes the optimization, characterization, and in vitro evaluation of a candidate chitosan-coated poly(lactic-co-glycolic acid) (PLGA-CS) nanovaccine containing a P. gingivalis antigen extract. The nanocarrier was prepared using the double emulsion solvent evaporation method and optimized for selected experimental factors, e.g. PLGA amount, surfactant concentration, w1/o phase ratio, applying a d-optimal statistical design to target the desired physicochemical criteria for its intended application. After nanocarrier optimization, the nanovaccine was characterized in terms of particle size, polydispersity index (PdI), ζ-potential, encapsulation efficiency (EE), drug loading (DL), morphology, and in vitro release profile, as well as for mucoadhesivity, stability under simulated gastrointestinal conditions, antigen integrity, in vitro cytotoxicity and uptake using THP-1 macrophages.The candidate PLGA-CS nanovaccine demonstrated appropriate physicochemical, mucoadhesive, and antigen release properties for oral delivery, along with acceptable levels of EE (55.3 ± 3.5 %) and DL (1.84 ± 0.12 %). The integrity of the encapsulated antigens remained uncompromised throughout NPs production and simulated gastrointestinal exposure, as confirmed by SDS-PAGE and Western blotting analyses. Furthermore, the nanovaccine showed effective in vitro uptake, while exhibiting low cytotoxicity. Taken together, these findings underscore the potential of PLGA-CS NPs as carriers for adequate antigen mucosal delivery, paving the way for further investigations into their applicability as vaccine candidates against P. gingivalis.

A Comparative Study of Using Poly (D, L, Lactide-co-Glycolic Acid) and Chitosan Nanoparticle as Vaccine Delivery System for a Recombinant Fusion Protein of Newcastle Disease Virus

Introduction: The more effective method of preventing many infectious diseases is vaccination. Numerous infectious diseases that affect both humans and animals have significantly decreased as a result of routine immunization. Aim: The present study aimed to compare the efficacy of in-house built chitosan and Polylactide coglycolic acid (PLGA) nanoparticles coupled with Pichia pastoris expressed immunogenic fusion (F) protein of Newcastle disease (ND). Objectives: Synthesis of biodegradable nanoparticles such as PLGA and chitosan offers a promising opportunity as a vaccine delivery system. Methods: Chitosan nanoparticles and PLGA nanoparticles were synthesized by ionic gelation, and double emulsion solvent evaporation, respectively, and the size was 38.6± 0.84 nm and 320 ±1.5nm, respectively. They demonstrated good epitope integrity of recombinant fusion protein and in vitro release kinetics studies have proved consistent release profile of protein Results: In vivo pathogenicity assay of separately injected nanoparticles has proved no abnormal signs and mortality in chickens. Specific pathogen-free (SPF) chicks were vaccinated with chitosan and PLGA nanoparticles and a recombinant fusion protein of the ND virus. It was demonstrated that PLGA nanoparticles coupled with a fusion protein of Newcastle disease virus conferred a marginally better immune response than chitosan nanoparticles. Comparative study-based results showed that PLGA-based nanoparticles proved a better vaccine delivery vehicle and generated an effective immune response without needing further adjuvants. Conclusion: The present study is a scientific platform for developing the PLGA-based vaccine delivery vehicle to improve immune responses against many infectious diseases.

Development and characterization of palbociclib-loaded PLGA nanobubbles for targeted cancer therapy

The objective of this study was to develop and optimize palbociclib-loaded nanobubbles for targeted breast cancer therapy. Biocompatible poly(DL-lactide-co-glycolide) was used to create nanobubbles loaded with palbociclib. The formulation process was meticulously crafted using a three-level Box-Behnken design and a double emulsion solvent evaporation method to precisely tailor the nanobubbles' properties. The Derringer's desirability method optimized variables by transforming responses into a desirability scale, resulting in a global desirability value. Optimal settings, A: 526.97 mg, B: 250 mg, C: 2.0% w/v, D: 6101 rpm, achieved a D value of 0.949. Palbociclib nanobubbles demonstrated a smaller particle size (31.78 ± 2.12) than plain nanobubbles (38.56 ± 3.56). PDI values indicated a uniform size distribution. The zeta potential remained consistent, with values of -31.34 ± 3.36 for plain and -31.56 ± 3.12 for drug-loaded nanobubbles. Encapsulation efficiency was 70.12%, highlighting effective drug encapsulation. Palbociclib release was significantly higher from nanobubbles in pH 7.4, especially with ultrasound, releasing almost 99.34% of the drug. Hemolytic activity assays confirmed safety for injection. Fluorescent intensity analysis revealed a two-fold increase in cellular uptake of palbociclib facilitated by ultrasound. The MTT assay demonstrated enhanced cytotoxicity of palbociclib-loaded nanobubbles, especially with ultrasound, emphasizing their potential for improved therapeutic efficacy. The IC50 values for palbociclib, without ultrasound, and with ultrasound were 98.3 μM, 72.34 μM, and 61.34 μM, respectively. The significant findings of this study emphasize the potential of palbociclib-loaded nanobubbles as a promising therapeutic system for improved breast cancer treatment.

Targeted polymeric primaquine nanoparticles: optimization, evaluation, and in-vivo liver uptake for improved malaria treatment

Primaquine (PQ) is a widely used antimalarial drug, but its high dosage requirements can lead to significant tissue damage and adverse gastrointestinal and hematological effects. Recent studies have shown that nanoformulations can enhance the bioavailability of pharmaceuticals, thereby increasing efficacy, reducing dosing frequency, and minimizing toxicity. In this study, PQ-loaded PLGA nanoparticles (PQ-NPs) were prepared using a modified double emulsion solvent evaporation technique (w/o/w). The PQ-NPs exhibited a mean particle size of 228 ± 2.6 nm, a zeta potential of +27.4 mV, and an encapsulation efficiency of 81.3 ± 3.5%. Scanning electron microscopy (SEM) confirmed their spherical morphology, and the in vitro release profile demonstrated continuous drug release over 72 h. Differential scanning calorimetry (DSC) thermograms indicated that the drug was present in the nanoparticles, with improved physical stability. Fourier-transform infrared spectroscopy (FTIR) analysis showed no interactions between the various substances in the NPs. In vivo studies in Swiss albino mice infected with Plasmodium berghei revealed that the nanoformulated PQ was 20% more effective than the standard oral dose. Biodistribution studies indicated that 80% of the NPs accumulated in the liver, highlighting their potential for targeted drug delivery. This research demonstrates the successful development of a nanomedicine delivery system for antimalarial drugs, offering a promising strategy to enhance treatment efficacy while reducing adverse effects.

IN VITRO EVALUATION OF THE ANTIBACTERIAL EFFECT OF CHITOSAN COATED TEICOPLANIN-LOADED LIPID NANOPARTICLES AGAINST STAPHYLOCOCCUS AUREUS

Objective: The aim of this research is to formulate teicoplanin-loaded solid lipid nanoparticles (SLN) coated with chitosan to sustain teicoplanin release for effective antibacterial therapy. Material and Method: “Double emulsion-solvent evaporation technique was used for the production of SLNs. The nanoparticles were characterised in terms of morphology, size, encapsulation efficacy, in-vitro drug release and antibacterial activity studies after optimization of process and formulation parameters. Result and Discussion: Transmission electron microscopy images confirmed the formation of spherical SLNs. With chitosan coating, the size increased (from 80 nm to 106 nm) and the negative value of zeta potential (- 11.29) changed to positive (+34.41). The in-vitro release data showed prolonged release of teicoplanin from optimized SLN and chitosan-coated SLN (c-SLN) formulations over 1 week. The antibacterial activity study (S. aureus and Methicillin-resistant S. aureus) showed the activity of the teicoplanin loaded SLN formulations. In conclusion, this study demonstrated the potential of c-SLN for effective delivery of teicoplanin.

Construction of recombinant Omp25 or EipB protein loaded PLGA nanovaccines for Brucellosis protection

Safe and effective vaccine candidates are needed to address the limitations of existing vaccines against Brucellosis, a disease responsible for substantial economic losses in livestock. The present study aimed to encapsulate recombinant Omp25 and EipB proteins, knowledged antigen properties, into PLGA nanoparticles, characterize synthesized nanoparticles with different methods, and assessed their in vitro/in vivo immunostimulatory activities to develop new vaccine candidates. The recombinant Omp25 and EipB proteins produced with recombinant DNA technology were encapsulated into PLGA nanoparticles by double emulsion solvent evaporation technique. The nanoparticles were characterized using FE-SEM, Zeta-sizer, and FT-IR instruments to determine size, morphology, zeta potentials, and polydispersity index values, as well as to analyze functional groups chemically. Additionally, the release profiles and encapsulation efficiencies were assessed using UV–Vis spectroscopy. After loading with recombinant proteins, O-NPs reached sizes of 221.2 ± 5.21 nm, while E-NPs reached sizes of 274.4 ± 9.51 nm. The cumulative release rates of the antigens, monitored until the end of day 14, were determined to be 90.39% for O-NPs and 56.1% for E-NPs. Following the assessment of the in vitro cytotoxicity and immunostimulatory effects of both proteins and nanoparticles on the J774 murine macrophage cells, in vivo immunization experiments were conducted using concentrations of 16 µg ml−1 for each protein. Both free antigens and antigen-containing nanoparticles excessively induced humoral immunity by increasing produced Brucella-specific IgG antibody levels for 3 times in contrast to control. Furthermore, it was also demonstrated that vaccine candidates stimulated Th1-mediated cellular immunity as well since they significantly raised IFN-gamma and IL-12 cytokine levels in murine splenocytes rather than IL-4 following to immunization. Additionally, the vaccine candidates conferred higher than 90% protection from the infection according to challenge results. Our findings reveal that PLGA nanoparticles constructed with the encapsulation of recombinant Omp25 or EipB proteins possess great potential to trigger Brucella-specific humoral and cellular immune response.

Enhanced anticancer activity of (–)-epigallocatechin-3-gallate (EGCG) encapsulated NPs toward colon cancer cell lines

(–)-Epigallocatechin-3-gallate (EGCG), a bioactive polyphenol of green tea, has chemo-preventive effects against various cancer cells. Nanoparticles (NPs) carrying different ligands are able to specifically interact with their receptors on different cancer cells that can provide effective release of cytotoxic drugs. In the present study, we have prepared EGCG entrapped NPs using PLGA (poly(d,l-lactide-co-glycolide)). Polyethylene glycol (PEG) and folic acid (FA) via double emulsion solvent evaporation (DESE) method obtained PLGA-EGCG (P-E), PLGA-PEG-EGCG (PP-E), and PLGA-PEG-FA-EGCG (PPF-E). Nanoformulations had been characterized with 1H NMR and FT-IR techniques, AFM, and DLS. PPF-E NPs showed an average size of 220 nm. Analysis of zeta potential confirmed the stability of NPs. HCT-116, HT-29, HCT-15, and HEK 293 cells were treated with both the prepared NPs and free EGCG (0–140 μM). Result showed PPF-E NPs had improved delivery, uptake and cell cytotoxicity toward human folic acid receptor-positive (FR+) colorectal cancer (CRC) cells as mainly on HCT-116 compared to HT-29, but not on the folic acid-negative cells (FR−) as HCT-15. PPF-E NPs enhanced intracellular reactive oxygen species (ROS) level in absence of N-acetyl-l-cysteine (NAC), elevated DNA fragmentation level, and increased apoptotic cell death at higher doses compared to other two NPs and free EGCG. In conclusion, PPF-E NPs exerted greater efficacy than PP-E, P-E, and free EGCG in HCT-116 cells.

Development of 225Ac-doped biocompatible nanoparticles for targeted alpha therapy

Targeted alpha therapy (TAT) relies on chemical affinity or active targeting using radioimmunoconjugates as strategies to deliver α-emitting radionuclides to cancerous tissue. These strategies can be affected by transmetalation of the parent radionuclide by competing ions in vivo and the bond-breaking recoil energy of decay daughters. The retention of α-emitting radionuclides and the dose delivered to cancer cells are influenced by these processes. Encapsulating α-emitting radionuclides within nanoparticles can help overcome many of these challenges. Poly(lactic-co-glycolic acid) (PLGA) nanoparticles are a biodegradable and biocompatible delivery platform that has been used for drug delivery. In this study, PLGA nanoparticles are utilized for encapsulation and retention of actinium-225 ([225Ac]Ac3+). Encapsulation of [225Ac]Ac3+ within PLGA nanoparticles (Zave = 155.3 nm) was achieved by adapting a double-emulsion solvent evaporation method. The encapsulation efficiency was affected by both the solvent conditions and the chelation of [225Ac]Ac3+. Chelation of [225Ac]Ac3+ to a lipophilic 2,9-bis-lactam-1,10-phenanthroline ligand ([225Ac]AcBLPhen) significantly decreased its release (< 2%) and that of its decay daughters (< 50%) from PLGA nanoparticles. PLGA nanoparticles encapsulating [225Ac]AcBLPhen significantly increased the delivery of [225Ac]Ac3+ to murine (E0771) and human (MCF-7 and MDA-MB-231) breast cancer cells with a concomitant increase in cell death over free [225Ac]Ac3+ in solution. These results demonstrate that PLGA nanoparticles have potential as radionuclide delivery platforms for TAT to advance precision radiotherapy for cancer. In addition, this technology offers an alternative use for ligands with poor aqueous solubility, low stability, or low affinity, allowing them to be repurposed for TAT by encapsulation within PLGA nanoparticles.Graphical

Noninvasive platelet membrane-coated Fe3O4 nanoparticles identify vulnerable atherosclerotic plaques.

Vulnerable atherosclerotic plaques serve as the primary pathological basis for fatal cardiovascular and cerebrovascular diseases. The precise identification and treatment of these vulnerable plaques hold paramount clinical importance in mitigating the incidence of myocardial infarction and stroke. Nevertheless, the identification of vulnerable plaques within the diffuse atherosclerotic plaques dispersed throughout the systemic circulation continues to pose a substantial challenge in clinical practice. Double emulsion solvent evaporation method, specifically the water-in-oil-in-water (W/O/W) technique, was employed to fabricate Fe3O4-based poly (lactic-co-glycolic acid) (PLGA) nanoparticles (Fe3O4@PLGA). Platelet membranes (PM) were extracted through hypotonic lysis, followed by ultrasound-assisted encapsulation onto the surface of Fe3O4@PLGA, resulting in the formation of PM-coated Fe3O4 nanoparticles (PM/Fe3O4@PLGA). Characterization of PM/Fe3O4@PLGA involved the use of dynamic light scattering, transmission electron microscopy, western blotting, and magnetic resonance imaging (MRI). A model of atherosclerotic vulnerable plaques was constructed by carotid artery coarctation and a high-fat diet fed to ApoE-/- (Apolipoprotein E knockout) mice. Immunofluorescence and MRI techniques were employed to verify the functionality of PM/Fe3O4@PLGA. In this study, we initially synthesized Fe3O4@PLGA as the core material. Subsequently, a platelet membrane was employed as a coating for the Fe3O4@PLGA, aiming to enable the detection of vulnerable atherosclerotic plaques through MRI. In vitro, PM/Fe3O4@PLGA not only exhibited excellent biosafety but also showed targeted collagen characteristics and MR imaging performance. In vivo, the adhesion of PM/Fe3O4@PLGA to atherosclerotic lesions was confirmed in a mouse model of vulnerable atherosclerotic plaques. Simultaneously, PM/Fe3O4@PLGA as a novel contrast agent for MRI has shown effective identification of vulnerable atherosclerotic plaques. In terms of safety profile in vivo, PM/Fe3O4@PLGA has not demonstrated significant organ toxicity or inflammatory response in the bloodstream. In this study, we successfully developed a platelet-membrane-coated nanoparticle system for the targeted delivery of Fe3O4@PLGA to vulnerable atherosclerotic plaques. This innovative system allows for the visualization of vulnerable plaques using MRI, thereby demonstrating its potential for enhancing the clinical diagnosis of vulnerable atherosclerotic plaques.

Co-delivery of doxycycline and rifampicin using CdTe-labeled poly (lactic-co-glycolic) acid for treatment of Brucella melitensis infection

Brucellosis poses a significant challenge in the medical field as a systemic infection with a propensity for relapse. This study presented a novel approach to brucellosis treatment, enhancing the efficacy of doxycycline and rifampicin through the use of poly (lactic-co-glycolic) acid coupled with cadmium-telluride quantum dots (Dox-Rif-PLGA@CdTe). The double emulsion solvent evaporation method was employed to prepare Dox-Rif-PLGA@CdTe. The study scrutinized the physicochemical attributes of these nanoparticles. The impact of antibiotic-loaded nanoparticles on Brucella melitensis was evaluated through well diffusion, minimum inhibitory concentration (MIC), and cell culture. The chemical analysis results demonstrated a possibility of chemical reactions occurring among the constituents of nanoparticles. Assessments using the well diffusion and MIC methods indicated that the impact of free drugs and nanoparticles on bacteria was equivalent. However, the drug-loaded nanoparticles significantly decreased the colony-forming units (CFUs) within the cell lines compared to free drugs. In conclusion, the synthesis of nanoparticles adhered to environmentally friendly practices and demonstrated safety. The sustained drug release over 100 h facilitated drug accumulation at the bacterial site, resulting in a heightened therapeutic effect on B. melitensis and improved outcomes in brucellosis treatment. The application of these synthesized nanodrugs exhibited promising therapeutic potential.

PLGA nanocapsules as a delivery system for a recombinant LRP-based therapeutic.

Telomerase activity is directly affected by the laminin receptor precursor (LRP) protein, a highly conserved nonintegrin transmembrane receptor, which has been shown to have therapeutic effects in ageing, and age-related diseases. Recently, it has been found that overexpression of LRP-FLAG, by plasmid transfection, leads to a significant increase in telomerase activity in cell culture models. This may indicate that upregulation of LRP can be used to treat various age-related diseases. However, transfection is not a viable treatment strategy for patients. Therefore, we present a nanoencapsulated protein-based drug synthesised using poly(lactic-co-glycolic acid) (PLGA) nanocapsules for delivery of the 37 kDa LRP protein therapeutic. PLGA nanocapsules were synthesised using the double emulsification-solvent evaporation technique. Different purification methods, including filtration and centrifugation, were tested to ensure that the nanocapsules were within the optimal size range, and the BCA assay was used to determine encapsulation efficiency. The completed drug was tested in a HEK-293 cell culture model, to investigate the effect on cell viability, LRP protein levels and telomerase activity. A significant increase in total LRP protein levels with a concomitant increase in cell viability and telomerase activity was observed. Due to the observed increase in telomerase activity, this approach could represent a safer alternative to plasmid transfection for the treatment of age-related diseases.

Aurothioglucose encapsulated nanoparticles fostered neuroprotection in streptozotocin-induced Alzheimer’s disease

Alzherimer’s disease (AD) is an age-dependent ubiquitous ailment worldwide with limited therapies that only alleviate the symptoms of AD but do not cure them entirely because of the restricted blood–brain barrier passage of the drug. Hence with new advanced technology, nanoparticles can offer an opportunity as the active candidate to overcome the above limitations. Aurothioglucose, a synthetic glucose derivative of the gold compound, has been clinically proven to be an effective anti-inflammatory drug for rheumatic arthritis. Recently, several scientific groups have developed gold nanoparticle preparations and tested them for the treatment of dementia. This study was planned to prepare the PLGA nanoparticles of aurothioglucose (ATG) and check the neuroprotective potential against STZ-induced AD in rats. The nanoparticles were prepared using the double emulsion solvent evaporation method and characterized for various parameters such as drug-excipient interaction, particle size, zeta potential, and morphology. Then, rats were injected STZ (3 mg/kg/i.c.v., days 1 and 3) and ATG (5 and 10 mg/kg/s.c.), ATG NPs (2.5 and 5 mg/kg/s.c.) and donepezil (2 mg/kg/p.o) from 15th to 29th day. Behavior parameters were performed using an actophotometer, MWM, and ORT. On the 30th day, all the animals were sacrificed, and the brains were isolated for estimating biochemical, neurochemical, and proinflammatory markers. It was observed that ATG NPs significantly restored all behavior and neurotransmitter alterations caused by STZ. Also, it increased antioxidant levels and decreased inflammatory cytokines significantly, then ATG alone. Thus, the study suggests that ATG loaded PLGA NPs could be used as a novel therapeutic strategy to slow the process of AD.

An enhanced cardio-protective effect of nanoparticles loaded with active components from Polygonum orientale L. against isoproterenol-induced myocardial ischemia in rats

In this study, nanoparticles loaded with active components from Polygonum orientale L. (PO), a traditional Chinese herb known for its anti-myocardial ischemic properties, were investigated for cardio-protective properties. Specifically, OVQ-Nanoparticles (OVQ-NPs) with Orientin (Ori), Vitexin (Vit), and Quercetin (Que) was obtained by double emulsion-solvent evaporation method. The OVQ-NPs exhibited a spherical shape, with a uniform size distribution of 136.77 ± 3.88 nm and a stable ζ-potential of −13.40 ± 2.24 mV. Notably, these nanoparticles exhibited a favorable sustained-release characteristic, resulting in an extended circulation time within the living organism. Consequently, the administration of these nanoparticles resulted in significant improvements in electrocardiograms and heart mass index of myocardial ischemic rats induced by isoproterenol, as well as decreased serum levels of CK, LDH, and AST. Furthermore, the results of histopathological examination, such as H&E staining and TUNEL staining, confirmed a reduced level of cardiac tissue pathology and apoptosis. Moreover, the quantification of biochemical indicators (SOD, MDA, GSH, NO, TNF-α, and IL-6) demonstrated that OVQ-NPs effectively mitigated myocardial ischemia by regulating oxidative stress and inflammatory pathways. In conclusion, OVQ-NPs demonstrate promising therapeutic potential as an intervention for myocardial ischemia, providing a new perspective on traditional Chinese medicine treatment in this area.

Levofloxacin loaded chitosan and poly-lactic-co-glycolic acid nano-particles against resistant bacteria: Synthesis, characterization and antibacterial activity

BackgroundWith the global increase in antibacterial resistance, the challenge faced by developing countries is to utilize the available antibiotics, alone or in combination, against resistant bacterial strains. We aimed to encapsulate the levofloxacin (LVX) into polymeric nanoparticles using biodegradable polymers i.e. Chitosan and PLGA, estimating their physicochemical characteristics followed by functional assessment as nanocarriers of levofloxacin against the different resistant strains of bacteria isolated from biological samples collected from tertiary care hospital in Lahore, Pakistan. MethodsLVX-NPs were synthesized using ion gelation and double emulsion solvent-evaporation method employing chitosan (CS) and poly-lactic-co-glycolic acid (PLGA), characterized via FTIR, XRD, SEM, and invitro drug release studies, while antibacterial activity was assessed using Kirby-Bauer disc-diffusion method. ResultsData revealed that the levofloxacin-loaded chitosan nanoparticles showed entrapment efficiency of 57.14% ± 0.03 (CS-I), 77.30% ± 0.08(CS-II) and 87.47% ± 0.08 (CS-III). The drug content, particle size, and polydispersity index of CS-I were 52.22% ± 0.2, 559 nm ± 31 nm, and 0.030, respectively, whereas it was 66.86% ± 0.17, 595 nm ± 52.3 nm and 0.057, respectively for CS-II and 82.65% ± 0.36, 758 nm ± 24 nm and 0.1, respectively for CS-III. The PLGA-levofloxacin nanoparticles showed an entrapment efficiency of 42.80% ± 0.4 (PLGA I) and 23.80% ± 0.4 (PLGA II). The drug content, particle size and polydispersity index of PLGA-I were 86% ± 0.21, 92 nm ± 10 nm, and 0.058, respectively, whereas it was 52.41% ± 0.45, 313 nm ± 32 nm and 0.076, respectively for PLGA-II. The XRD patterns of both polymeric nanoparticles showed an amorphous nature. SEM analysis reflects the circular-shaped agglomerated nanoparticles with PLGA polymer and dense spherical nanoparticles with chitosan polymer. The in-vitro release profile of PLGA-I nanoparticles showed a sustained release of 82% in 120 h and it was 58.40% for CS-III. Both types of polymeric nanoparticles were found to be stable for up to 6 months without losing any major drug content. Among the selected formulations, CS-III and PLGA-I, CS-III had better antibacterial potency against gram+ve and gram-ve bacteria, except for K. pneumonia, yet, PLGA-I demonstrated efficacy against K. pneumonia as per CSLI guidelines. All formulations did not exhibit any signs of hemotoxicity, nonetheless, the CS-NPs tend to bind on the surface of RBCs. ConclusionThese data suggested that available antibiotics can effectively be utilized as nano-antibiotics against resistant bacterial strains, causing severe infections, for improved antibiotic sensitivity without compromising patient safety.

Optimisation of microencapsulation efficiency of propolis phenolic compounds by double emulsion method using response surface methodology

AbstractThe aim of this study was to optimise the microencapsulation efficiency of propolis phenolic compounds by double emulsion solvent evaporation technique (W1/O/W2). The solvent/sample ratio and the polymer and surfactant concentration parameters were optimised using response surface methodology (RSM) through Box–Behnken Design (BBD). For each parameter studied, total phenolic content encapsulation efficiency (TPCEE), free radical scavenging activity (DPPH), and ferric reducing antioxidant power (FRAP) were evaluated. The results showed that the optimal parameters were: 31.60 mg mL−1 for sample/solvent ratio, 606.28 mg mL−1 for poly(ε-caprolactone) (PCL) concentrations, and 2.05 g mL−1 for poly(vinyl alcohol) (PVA) concentration. The optimum values obtained were: 84.62% for encapsulation efficiency of phenolic content, 51.89% for DPPH, and 48,733 mg Trolox Equivalent/100 g dry weight for FRAP. The experimental checking of results revealed the validity of elaborated models and their suitability for the prediction of both responses. The developed mathematical models have expressed a high level of significance through RSM optimisation processes for phenolic antioxidants of propolis.

Polymeric Propranolol Nanoparticles for Intraocular Delivery: Formulation, Characterization, and Vitreous Pharmacokinetics.

Recent studies have reported the promising effect of intravitreal propranolol on retinal neovascularization. However, rapid clearance and short half-life of the drug in the vitreous are the main drawbacks of this therapeutic approach. This study investigates the extension of the residence time of propranolol in the vitreous by polymeric nanoparticles (NPs) with the prospect of improving choroidal neovascularization treatment. The poly (lactic-co-glycolic) acid (PLGA) NPs were fabricated by a modified double emulsion solvent evaporation method and the obtained NPs were characterized for their size, poly dispersity index (PDI), and surface image. The in vitro release, cell cytotoxicity, and uptake of NPs were also evaluated. To investigate the effect of the vitreous pharmacokinetic drug loaded NPs versus that of the free propranolol, they were intravitreally injected into the rabbits' eyes and the drug vitreous concentrations in defined intervals were analyzed by high performance liquid chromatography (HPLC). The spherical NPs with about 230 nm size, and almost 10% drug loading were obtained. Based on the 3-(4, 5-Dimethylthiazol-2-Yl)-2, 5-Diphenyltetrazolium Bromide (MTT) outcomes, 30 µg/ml of propranolol was considered as the guide dosage in the intravitreal injection. Confocal microscopy images verified the presence of labeled NPs in the posterior segment after five days of receiving the injection. In vivo assay revealed that the vanishing rate of propranolol in rabbits treated with propranolol NPs was reduced at twice the rate as compared to that of the vanishing rate experienced with only the free drug. PLGA NPs can prolong the existence of propranolol in both vitreous and posterior ocular tissues, and thus, may provide an effective approach in treatment of posterior segment neovascularization.

Polylactic Glycolic Acid-Mediated Delivery of Plectasin Derivative NZ2114 in Staphylococcus epidermidis Biofilms.

Antimicrobial peptides (AMPs) are antibiotic candidates; however, their instability and protease susceptibility limit clinical applications. In this study, the polylactic acid-glycolic acid (PLGA)-polyvinyl alcohol (PVA) drug delivery system was screened by orthogonal design using the double emulsion-solvent evaporation method. NZ2114 nanoparticles (NZ2114-NPs) displayed favorable physicochemical properties with a particle size of 178.11 ± 5.23 nm, polydispersity index (PDI) of 0.108 ± 0.10, ζ potential of 4.78 ± 0.67 mV, actual drug-loading rate of 4.07 ± 0.37%, encapsulation rate of 81.46 ± 7.42% and cumulative release rate of 67.75% (120 h) in PBS. The results showed that PLGA encapsulation increased HaCaT cell viability by 20%, peptide retention in 50% serum by 24.12%, and trypsin tolerance by 4.24-fold. Meanwhile, in vitro antimicrobial assays showed that NZ2114-NPs had high inhibitory activity against Staphylococcus epidermidis (S. epidermidis) (4-8 μg/mL). Colony counting and confocal laser scanning microscopy (CLSM) confirmed that NZ2114-NPs were effective in reducing the biofilm thickness and bacterial population of S. epidermidis G4 with a 99% bactericidal rate of persister bacteria, which was significantly better than that of free NZ2114. In conclusion, the results demonstrated that PLGA nanoparticles can be used as a reliable NZ2114 delivery system for the treatment of biofilm infections caused by S. epidermidis.