Double Cut And Join Operations Research Articles

Approximating the DCJ distance of balanced genomes in linear time

BackgroundRearrangements are large-scale mutations in genomes, responsible for complex changes and structural variations. Most rearrangements that modify the organization of a genome can be represented by the double cut and join (DCJ) operation. Given two balanced genomes, i.e., two genomes that have exactly the same number of occurrences of each gene in each genome, we are interested in the problem of computing the rearrangement distance between them, i.e., finding the minimum number of DCJ operations that transform one genome into the other. This problem is known to be NP-hard.ResultsWe propose a linear time approximation algorithm with approximation factor O(k) for the DCJ distance problem, where k is the maximum number of occurrences of any gene in the input genomes. Our algorithm works for linear and circular unichromosomal balanced genomes and uses as an intermediate step an O(k)-approximation for the minimum common string partition problem, which is closely related to the DCJ distance problem.ConclusionsExperiments on simulated data sets show that our approximation algorithm is very competitive both in efficiency and in quality of the solutions.

Sorting Linear Genomes with Rearrangements and Indels.

Rearrangements are mutations that can change the organization of a genome, but not its content. Examples are inversions of DNA segments, translocations of chromosome ends, fusions and fissions of chromosomes. All mentioned rearrangements can be represented by the generic Double Cut and Join (DCJ) operation. However, the DCJ operation also allows circular chromosomes to be created at intermediate steps, even if the compared genomes are linear. In this case it is more plausible to consider a restriction in which the reincorporation of a circular chromosome has to be done immediately after its creation. We call these two consecutive operations an ER composition. It has been shown that an ER composition mimics either an internal block interchange (when two segments in the same chromosome exchange their positions), or an internal transposition (the special case of a block interchange when the two segments are adjacent). The DCJ distance of two genomes is the same, regardless of this restriction, and can be computed in linear time. For comparing two genomes with unequal contents, in addition to rearrangements we have to allow insertions and deletions of DNA segments-named indels. It is already known that the distance in the model combining DCJ and indel operations can be exactly computed. Again, for linear genomes it would be more plausible to adopt a restricted version with ER compositions. This model was studied recently by da Silva et al. (BMC Bioinformatics 13, Suppl. 19, S14, 2012), but only an upper bound for the restricted DCJ-indel distance was provided. Here we first solve an open problem posed in that paper and present a very simple proof showing that the distance, which can be computed in linear time, is the same for both the unrestricted and the restricted DCJ-indel models. We then give a simpler algorithm for computing an optimal restricted DCJ-indel sorting scenario in O(n log n) time. We also relate the DCJ-indel distance to the restricted DCJ-substitution distance, which instead of indels considers a more powerful operation that allows the substitution of a DNA segment by another DNA segment. We show that the DCJ-indel distance is a 2-approximation for the restricted DCJ-substitution distance.

On the inversion-indel distance

BackgroundThe inversion distance, that is the distance between two unichromosomal genomes with the same content allowing only inversions of DNA segments, can be computed thanks to a pioneering approach of Hannenhalli and Pevzner in 1995. In 2000, El-Mabrouk extended the inversion model to allow the comparison of unichromosomal genomes with unequal contents, thus insertions and deletions of DNA segments besides inversions. However, an exact algorithm was presented only for the case in which we have insertions alone and no deletion (or vice versa), while a heuristic was provided for the symmetric case, that allows both insertions and deletions and is called the inversion-indel distance. In 2005, Yancopoulos, Attie and Friedberg started a new branch of research by introducing the generic double cut and join (DCJ) operation, that can represent several genome rearrangements (including inversions). Among others, the DCJ model gave rise to two important results. First, it has been shown that the inversion distance can be computed in a simpler way with the help of the DCJ operation. Second, the DCJ operation originated the DCJ-indel distance, that allows the comparison of genomes with unequal contents, considering DCJ, insertions and deletions, and can be computed in linear time.ResultsIn the present work we put these two results together to solve an open problem, showing that, when the graph that represents the relation between the two compared genomes has no bad components, the inversion-indel distance is equal to the DCJ-indel distance. We also give a lower and an upper bound for the inversion-indel distance in the presence of bad components.

DCJ-indel and DCJ-substitution distances with distinct operation costs

BackgroundClassical approaches to compute the genomic distance are usually limited to genomes with the same content and take into consideration only rearrangements that change the organization of the genome (i.e. positions and orientation of pieces of DNA, number and type of chromosomes, etc.), such as inversions, translocations, fusions and fissions. These operations are generically represented by the double-cut and join (DCJ) operation. The distance between two genomes, in terms of number of DCJ operations, can be computed in linear time. In order to handle genomes with distinct contents, also insertions and deletions of fragments of DNA – named indels – must be allowed. More powerful than an indel is a substitution of a fragment of DNA by another fragment of DNA. Indels and substitutions are called content-modifying operations. It has been shown that both the DCJ-indel and the DCJ-substitution distances can also be computed in linear time, assuming that the same cost is assigned to any DCJ or content-modifying operation.ResultsIn the present study we extend the DCJ-indel and the DCJ-substitution models, considering that the content-modifying cost is distinct from and upper bounded by the DCJ cost, and show that the distance in both models can still be computed in linear time. Although the triangular inequality can be disrupted in both models, we also show how to efficiently fix this problem a posteriori.

Restricted DCJ-indel model: sorting linear genomes with DCJ and indels

BackgroundThe double-cut-and-join (DCJ) is a model that is able to efficiently sort a genome into another, generalizing the typical mutations (inversions, fusions, fissions, translocations) to which genomes are subject, but allowing the existence of circular chromosomes at the intermediate steps. In the general model many circular chromosomes can coexist in some intermediate step. However, when the compared genomes are linear, it is more plausible to use the so-called restricted DCJ model, in which we proceed the reincorporation of a circular chromosome immediately after its creation. These two consecutive DCJ operations, which create and reincorporate a circular chromosome, mimic a transposition or a block-interchange. When the compared genomes have the same content, it is known that the genomic distance for the restricted DCJ model is the same as the distance for the general model. If the genomes have unequal contents, in addition to DCJ it is necessary to consider indels, which are insertions and deletions of DNA segments. Linear time algorithms were proposed to compute the distance and to find a sorting scenario in a general, unrestricted DCJ-indel model that considers DCJ and indels.ResultsIn the present work we consider the restricted DCJ-indel model for sorting linear genomes with unequal contents. We allow DCJ operations and indels with the following constraint: if a circular chromosome is created by a DCJ, it has to be reincorporated in the next step (no other DCJ or indel can be applied between the creation and the reincorporation of a circular chromosome). We then develop a sorting algorithm and give a tight upper bound for the restricted DCJ-indel distance.ConclusionsWe have given a tight upper bound for the restricted DCJ-indel distance. The question whether this bound can be reduced so that both the general and the restricted DCJ-indel distances are equal remains open.

Approximating the edit distance for genomes with duplicate genes under DCJ, insertion and deletion

Computing the edit distance between two genomes under certain operations is a basic problem in the study of genome evolution. The double-cut-and-join (DCJ) model has formed the basis for most algorithmic research on rearrangements over the last few years. The edit distance under the DCJ model can be easily computed for genomes without duplicate genes. In this paper, we study the edit distance for genomes with duplicate genes under a model that includes DCJ operations, insertions and deletions. We prove that computing the edit distance is equivalent to finding the optimal cycle decomposition of the corresponding adjacency graph, and give an approximation algorithm with an approximation ratio of 1.5 + ∈.

Double Cut and Join with Insertions and Deletions

Many approaches to compute the genomic distance are still limited to genomes with the same content, without duplicated markers. However, differences in the gene content are frequently observed and can reflect important evolutionary aspects. While duplicated markers can hardly be handled by exact models, when duplicated markers are not allowed, a few polynomial time algorithms that include genome rearrangements, insertions and deletions were already proposed. In an attempt to improve these results, in the present work we give the first linear time algorithm to compute the distance between two multichromosomal genomes with unequal content, but without duplicated markers, considering insertions, deletions and double cut and join (DCJ) operations. We derive from this approach algorithms to sort one genome into another one also using DCJ operations, insertions and deletions. The optimal sorting scenarios can have different compositions and we compare two types of sorting scenarios: one that maximizes and one that minimizes the number of DCJ operations with respect to the number of insertions and deletions. We also show that, although the triangle inequality can be disrupted in the proposed genomic distance, it is possible to correct this problem adopting a surcharge on the number of non-common markers. We use our method to analyze six species of Rickettsia, a group of obligate intracellular parasites, and identify preliminary evidence of clusters of deletions.

Restricted DCJ Model: Rearrangement Problems with Chromosome Reincorporation

We study three classical problems of genome rearrangement--sorting, halving, and the median problem--in a restricted double cut and join (DCJ) model. In the DCJ model, introduced by Yancopoulos et al., we can represent rearrangement events that happen in multichromosomal genomes, such as inversions, translocations, fusions, and fissions. Two DCJ operations can mimic transpositions or block interchanges by first extracting an appropriate segment of a chromosome, creating a temporary circular chromosome, and then reinserting it in its proper place. In the restricted model, we are concerned with multichromosomal linear genomes and we require that each circular excision is immediately followed by its reincorporation. Existing linear-time DCJ sorting and halving algorithms ignore this reincorporation constraint. In this article, we propose a new algorithm for the restricted sorting problem running in O(n log n) time, thus improving on the known quadratic time algorithm. We solve the restricted halving problem and give an algorithm that computes a multilinear halved genome in linear time. Finally, we show that the restricted median problem is NP-hard as conjectured.

The Solution Space of Sorting by DCJ

In genome rearrangements, the double cut and join (DCJ) operation, introduced by Yancopoulos et al. in 2005, allows one to represent most rearrangement events that could happen in multichromosomal genomes, such as inversions, translocations, fusions, and fissions. No restriction on the genome structure considering linear and circular chromosomes is imposed. An advantage of this general model is that it leads to considerable algorithmic simplifications compared to other genome rearrangement models. Recently, several works concerning the DCJ operation have been published, and in particular, an algorithm was proposed to find an optimal DCJ sequence for sorting one genome into another one. Here we study the solution space of this problem and give an easy-to-compute formula that corresponds to the exact number of optimal DCJ sorting sequences for a particular subset of instances of the problem. We also give an algorithm to count the number of optimal sorting sequences for any instance of the problem. Another interesting result is the demonstration of the possibility of obtaining one optimal sorting sequence by properly replacing any pair of consecutive operations in another optimal sequence. As a consequence, any optimal sorting sequence can be obtained from one other by applying such replacements successively, but the problem of finding the shortest number of replacements between two sorting sequences is still open.