Doped Metal Atoms Research Articles

Comparison of Gas-sensitive response of three metal-doped GaNNT with Pb, Pd and Pt after adsorption of hazardous gases

In this paper, we comparatively analyze the gas-sensing ability of Pb, Pd and Pt metal-doped GaNNT (M-GaNNT) materials for the hazardous H2S, SO2, NH3 and Cl2 gases. The adsorption structure, adsorption energy (Eads), density of states (DOS), differential charge density and frontier molecular orbital of the M-GaNNT adsorbed hazardous gas have been studied based on the density functional theory (DFT) calculations. The results show that the energy gap of Pb-GaNNT performs the largest change with an increasing percentage change of 358 % after the Cl2 adsorption compared with that before the Cl2 adsorption, while the energy gap of Pt-GaNNT has the least change with an average value of 20.8 %. The doping of metal atoms can effectively improve the gas-sensitivity of M-GaNNT, and the gas-sensitivity follows the order of Pb-GaNNT> Pd-GaNNT> Pt-GaNNT. The potential applications of M-GaNNT in gas sensor and adsorbent are then predicted through the analysis of the adsorption energy, sensitive response (SR) and recovery time (τ). Pb-GaNNT performs the best Cl2 gas removal since the largest Eads (-5.883 eV), largest SR (4.4 × 1015) and largest τ (2.9 × 1087s) can be determined for Cl2 adsorption on Pb-GaNNT. Furthermore, Pb-GaNNT is a good NH3 gas sensor since the related τ is only 2.9 s at 498 K, and a small Eads (-1.232 eV) with large SR (9.7 × 105) can be determined as well. The research findings in this paper provide a new sensor material option for both the detection and the removal of harmful gases, and the systematically theoretical method can spread to other systems.

Theoretical study of adsorption of gas (CO, CO2, NH3) by metal (Au, Ag, Cu)-doped single-layer WS2.

The adsorptions of gas (CO, CO2, NH3) by metal (Au, Ag, Cu)-doped single layer WS2 are studied by density functional theory. The doping of metal atoms makes WS2 behave as n-type semiconductors. The final adsorption sites for CO, CO2, and NH3 are close to the atomic sites of the doped metal. The adsorptions of CO and NH3 gases on Cu/WS2, Ag/WS2, and Au/WS2 are dominated by chemisorption. The doped metal atoms enhance the hybridization of the substrate with the gas molecular orbitals, which contributes to the charge transfer and enhances the adsorption of the gas with the material surface. The adsorptions of CO and NH3 on Cu/WS2 and Ag/WS2 allow favorable desorption in a short time after heating. The single-layer Cu/WS2 is proved to have the potential to be used as a reliable recyclable sensor for CO. This work provides a theoretical basis for developing high-performance WS2-based gas sensors. In this paper, the adsorption energy, electronic structure, charge transfer, and recovery time of CO, CO2, and NH3 in the doped system have been investigated based on the CASTEP code of density functional theory. The exchange correlation function used is the Perdew-Burke-Ernzerhof (PBE) generalized gradient approximation (GGA). The TS (Tkatchenko-Scheffler) dispersion correction method was used to involve the effects of van der Waals interaction on the adsorption energies for all adsorption system. The ultrasoft pseudopotentials are chosen and the plane-wave cut-off energies are set to 500eV. The k-point mesh generated by the Monkhorst package scheme is used to perform the numerical integration of the Brillouin zone and 5 × 5 × 1k-point grid is used. The tolerances of total energy convergence, maximum ionic force, ionic displacement, and stress component are 1.0 × 10-5eV/atom, 0.03eV/Å, 0.001Å, and 0.05 GPa, respectively.

Single-, double-, and triple-atom catalysts on PC6 for nitrate reduction to ammonia: A computational screening

Single-atom catalysts (SACs) exhibit higher atomic utilization, while double-atom catalysts (DACs) and triple-atom catalysts (TACs) have an advantage due to the synergistic effect of multiple atomic centers. However, the current research on the mechanism of multiple-atom catalysts in electrocatalytic nitrate reduction to ammonia (NRA) remains insufficient. Herein, we investigated a series of homonuclear single-, double-, and triple-atom catalysts on carbon phosphide (PC6) monolayers (TMn@PC6, where TM = non-noble transition metals; n = 1, 2, or 3). The NRA activity of these catalysts was assessed by the density functional theory calculations, Co3@PC6 and Ru3@PC6 exhibit superior limiting potentials of −0.34 V and −0.36 V, respectively. Their capability to produce *H with optimal free energy on their surface enhances the electrochemical potential-determining step of *NO to *NOH while simultaneously inhibiting the hydrogen evolution reaction. The movement of the d-band center, induced by metal atom doping, regulates the adsorption strength of *NO, thus achieving a lower barrier for the hydrogenation step. This work provides theoretical guidance for the development of highly efficient multiple-atom catalysts for NRA.

Electronic Structure and Functions of Carbon Nitride in Frontier Green Catalysis.

ConspectusGraphitic carbon nitride-based materials have emerged as promising photocatalysts for a variety of energy and environmental applications owing to their "earth-abundant" nature, structural versatility, tunable electronic and optical properties, and chemical stability. Optimizing carbon nitride's physicochemical properties encompasses a variety of approaches, including the regulation of inherent structural defects, morphology control, heterostructure construction, and heteroatom and metal-atom doping. These strategies are pivotal in ultimately enhancing their photocatalytic activities. Previous reviews with extensive examples have mainly focused on the synthesis, modification, and application of carbon nitride-based materials in photocatalysis. However, there has been a lack of straightforward and in-depth discussion to understand the electronic characteristics and functions of various engineered carbon nitrides as well as their precise tailoring strategies and ultimately to explain the regularity and specificity of their improved performance in targeted photocatalytic systems. In the past ten years, our group has conducted extensive investigations on carbon nitride-based materials and their application in photocatalysis. These studies demonstrate the close yet intricate relationship between the electronic structure of carbon nitride materials and their photocatalytic reactivity. Understanding the electronic structure and functions of carbon nitride, as well as different engineering strategies, is essential for the improvement of photocatalytic processes from fundamental study to practical applications.To this end, in this Account, we first delve into the nature of the electronic properties of carbon nitride, highlighting the electronic structures, including band structure, density of states, molecular orbitals, and band center, as well as its electronic functions, such as the charge distribution, internal electric field, and external electric force. Subsequently, based on recent research in our group, we present a detailed discussion of the strategic modifications of carbon nitride and the consequential impacts on the physicochemical properties, particularly the optical properties and intrinsic electronic characteristics, for enhancing the photocatalytic performance. These modifications are categorized as follows: (i) component changing, which involves intralayer and interface heterojunctions as well as homojunctions, to modulate the band-edge potentials and reactivity of photoinduced electrons and holes toward surface redox reactions; (ii) dimensional tuning, which engineers the dimensional structure of carbon nitride, to influence the electron transfer direction; (iii) defect and heteroatom modification, which introduces a symmetry break in the carbon nitride framework, to promote charge redistribution for altering the charge density and electronic structure; and (iv) anchoring of single-atom metals to facilitate orbital hybridization and charge transfer enhancement through the unique metal-N coordination configurations. Finally, we propose an appraisal of the prospects and challenges in the precise manipulation and characterization of the electronic structure and functions of carbon nitride. The integration of in situ electronic structure analysis, theoretical calculation based on machine learning, and precise mechanism study may propel its substantial development in the light-driven circular economy. We hope this Account aspires to offer novel insights and perspectives into the operational mechanisms and tailored structure of carbon nitride-based materials in photocatalysis.

Boosting the Electrical Transfer by Molybdenum Doping for Robust and Flexible NiSe-Based Supercapacitor.

NiSe is a promising electrode material for enhancing the energy density of supercapacitors, but it faces challenges such as sensitivity to electrolyte anions, limited specific capacity, and unstable cycling. This study employs a strategy of metal atom doping to address these issues. Through a hydrothermal reaction, Mo-doped NiSe demonstrates significant improvement in electrochemical performance, exhibiting high capacity (799.90Cg-1), splendid rate performance, and excellent cyclic stability (90% capacity retention). The introduction of Mo induces charge redistribution in NiSe, leading to a reduction in the band gap. Theoretical calculation reveals that Mo doping can effectively enhance the electrical conductivity and the adsorption energy of NiSe. A flexible printed hybrid Mo-doped NiSe-based supercapacitor is fabricated, demonstrating superior electrochemical performance (367.04mFcm-2) and the ability to power timers, LEDs, and toy fans. This research not only deepens the understanding of the electrochemical properties of metal-doped NiSe but also highlights its application potential in high-performance supercapacitors.

Metal atom doping with GeC: Tuning electronic, magnetic and electrocatalytic hydrogen evolution

The crystal structure stability, electronic and magnetic properties, field emission, and catalytic properties of the metal-doped GeC systems are investigated by the first principles. The Ef (formation energy) in the range of −5.713 to −14.240 eV indicates that the metal-doped GeC systems have energy stability. The Al-, Cr-, Fe-, Co-, Cu-, and Zn-doped GeC systems exhibit metallic properties, but the Ti-, V-, Mn-, and Ni-doped GeC systems retain semiconductor properties. Notably, the V-, Cr-, Mn-, Fe-, Co-, Cu-, and Zn-doped GeC systems exhibit magnetism due to doping effects. In addition, the Ti-, V-, Cr-, Mn-, Fe-, and Co-doped GeC systems have field emission properties relative to the intrinsic GeC due to the decrease of work function. Importantly, the low over-potential indicates that the doping systems have strong electro-catalytic hydrogen production ability. Therefore, the metal-doped GeC has potential applications in spintronic, field emission devices, and electro-catalytic hydrogen production.

Biosensor for the early diagnosis of lung cancer: A DFT study on the applicability of metal-doped graphene structures

The usability of metal-doped graphene structures as biosensor was investigated to develop a preliminary diagnosis of lung cancer in this study. The adsorption and sensing properties of graphene structures formed by doping metal atoms (Pt, Pd, Ni, Ir and Cu) toward aniline, toluene, styrene and benzene gases were examined. Using the DFT/WB97XD method with 6–31 G (d, p)/LANL2DZ basis sets, significant charge transfer from the target gases to the metal-doped graphene structures were observed. After adsorption, the HOMO-LUMO gap values of graphene structures doped with Pt, Cu, and Ni atoms have decreased. All adsorption processes are spontaneous according to the adsorption Gibbs free energy. The findings indicate that copper-doped and platinum-doped graphene have strong potential as electronic and work function sensors for detecting aniline, toluene, styrene, and benzene, which are biomarkers for lung cancer.

Mediating peroxymonosulfate activation path in Fenton-like reaction via doping different metal atoms into g-C3N5

Peroxymonosulfate (PMS) could be activated by either radical path or non-radical path, how to rationally mediate these two routines was an important unresolved issue. This work has introduced a simple way to address this problem via metal atom doping. It was found that Fe-doped nitrogen-rich graphitic carbon nitride (Fe-C3N5) exhibited high activity towards PMS activation for tetracycline degradation, and the degradation rate was 3.14 times higher than that of Co-doped nitrogen-rich graphitic carbon nitride (Co-C3N5). Radical trapping experiment revealed the contributions of reactive species over two catalysts were different. Electron paramagnetic resonance analysis further uncovered the non-radical activation path played a dominated role on Fe-C3N5 surface, while the radical activation path was the main routine on Co-C3N5 surface. Density functional theory calculations, X-ray photoelectron spectroscopy analysis, and electrochemical experiments provided convincing evidence to support these views. This study supplied a novel method to mediate PMS activation path via changing the doped metal atom in g-C3N5 skeleton, and it allowed us to better optimize the PMS activation efficiency.

Alkali-fluoride-salt-accelerated oxidation behavior of graphite under air atmosphere

Air ingress accident scenarios may result in the oxidation of graphite matrix materials and cause serious safety problems in molten salt reactor. However, the oxidation behavior of the molten-salt-infiltrated graphite remains elusive. In this study, the effect of alkali fluoride salts (LiF, NaF, KF and ternary salt FLiNaK) on the oxidation behavior of graphite powder under air atmosphere was investigated. Thermogravimetric analysis and oxidation tests manifest that the initial oxidation temperature of the graphite is reduced from 720 °C to 510–610 °C, because of the presence of the alkali fluoride salts. The catalytic oxidation effect follows the order of KF > NaF > LiF. Careful characterizations reveal that the pristine graphite is mainly oxidized at the graphite edges, while salt-infiltrated graphite is mainly damaged at the graphitic basal planes. Density functional theory calculations suggest that the doping of alkali metal atoms does not change the physical adsorption feature of the oxygen molecule on the graphite plane surface, but increases its adsorption energy to facilitate the graphite oxidation reactions.

Adsorption of SF6 decomposition gases (SO2 and SOF2) onto pristine and transition metal modified WSe2 monolayers: A systematic DFT study

The properties of SF6 characteristic decomposition products (SO2 and SOF2) adsorbed on intrinsic and transition metal atom modified WSe2 monolayers were studied based on the first principles. The adsorption structure, adsorption energy, electron transfer, density of states, electron differential density, work function, and desorption properties are comprehensively discussed. In addition, the charge transfer in the adsorption system was qualitatively analyzed by using the frontier molecular orbital theory and energy band. The results show that the pristine WSe2 monolayer has poor sensing performance for SO2 and SOF2. Effective modification methods can significantly increase the adsorption activity of the monolayer surface. The modification methods of transition metal atom adsorption and doping are discussed respectively. The modified monolayer all exhibit good sensing properties compared to the pristine monolayer due to the significant electronic hybridization between the impurity atoms and the gas molecules. Finally, the recovery response time of gas molecules from transition metal atom modified WSe2 monolayer is evaluated to evaluate its potential application in the detection and removal of fault gases in SF6 insulation equipment. Our work is not only important for predicting novel transition metal sulfide sensing materials, but also provides theoretical guidance for further developing WSe2-based sensors and scavengers for environmental monitoring applications.

Theoretical study of the CO2 activation on modified MoS2/CsPbBr3 photocatalysts

Photocatalytic CO2 reduction emerges as a promising strategy to mitigate global warming and energy crises. The MoS2/CsPbBr3 complexes, recognized as the groundbreaking and efficient photocatalysts, have drawn considerable attention for their CO2 reduction capabilities. In this work, we conducted an extensive analysis of the CO2 activation on the various MoS2/CsPbBr3 surfaces, including perfect MoS2/CsPbBr3, M@MoS2/CsPbBr3 (single metal atom loading), defect-MoS2/CsPbBr3 (including VS, VMo, V2S, MoS, SMo and VMoS3), and VS−M@MoS2/CsPbBr3 (single metal atom doping VS site). Our investigation encompassed the geometric and electronic structures of these systems and their interactions with CO2 molecules, particularly the role of surface termination in above processes. The findings indicate that MoS2/CsPbBr3 systems, whether loading with single metal atoms or containing defects, show a significantly enhanced ability to activate CO2. Conversely, perfect MoS2/CsPbBr3 and VS−M@MoS2/CsPbBr3 demonstrate only a moderate capacity for CO2 activation. It is crucial that the activation of CO2 depends on whether the above modification methods introduce gap states between the VBM and CBM. Meanwhile, we find that the adsorption of CO2 on the surfaces of MoS2/CsPbBr3 loaded with single metal atoms and doped with them is significantly influenced by the terminals. While the terminals do not significantly affect the CO2 adsorption on MoS2/CsPbBr3 with defects. Furthermore, based on the CO2 activation models, we further investigate the Gibbs free energy change of the reaction pathway for CO2 photocatalytic reduction to CO. Through our research, we aim to provide useful theoretical insights for the design and preparation of novel CO2 reduction photocatalysts.

Highly Selective Electroreduction of Nitrobenzene to Aniline by Co-Doped 1T-MoS2.

The selective electrocatalytic reduction of nitrobenzene (NB) to aniline demands a desirable cathodic catalyst to overcome the challenges of the competing hydrogen evolution reaction (HER), a higher overpotential, and a lower selectivity. Here, we deposit Co-doped 1T MoS2 on Ti mesh by the solvothermal method with different doping percentages of Co as x % Co-MoS2 (where x = 3, 5, 8, 10, and 12%). Because of the lowest overpotential, lower charge-transfer resistance, strong suppression of the competing HER, and higher electrochemical surface area, 8% Co-MoS2 achieves 94% selectivity of aniline with 54% faradaic efficiency. The reduction process follows first-order dynamics with a reaction coefficient of 0.5 h-1. Besides, 8% Co-MoS2 is highly stable and retains 81% selectivity even after 8 cycles. Mechanistic studies showed that the selective and exothermic adsorption of the nitro group at x % Co-MoS2 leads to a higher rate of NB reduction and higher selectivity of aniline. The aniline product is successfully removed from the solution by polymerization at FTO. This study signifies the impact of doping metal atoms in tuning the electronic arrangement of 1T-MoS2 for the facilitation of organic transformations.

High performance catalyst for metal catalysis coupled with photocatalysis and its catalytic ammonia borane methanolysis for hydrogen production

In the study, the influence and mechanisms of metal and non-metal dopants on the photochemical properties of the semiconductor catalyst g-C3N4 are investigated. The results reveal that doping Ni, Ru, and B on g-C3N4 results in significant alterations to the energy band structure, the band gap value decreases to 0.78 eV (Ru@g-C3N4), 0.69 eV (Ni@g-C3N4), 0.5 eV (RuB@B-g-C3N4), and 0.1 eV (NiB@B-g-C3N4) from the original value of 1.139 eV. The doping of metal and non-metal atoms can significantly enhance the light absorption capability and photothermal conversion efficiency of B-g-C3N4. The mechanism of ammonia borane (AB) dehydrogenation follows the stepwise dehydrogenation principle. AB molecules adsorb onto the active metal centers, and with the assistance of the catalytic sites, CH3OH molecules activate and attack the B–N bond in AB molecules, leading to the initial breakage of the B–N bond, the interaction between O atoms in CH3OH and N atoms in AB continues, forming NH3BH2(OCH3). Interactions between H(B) and H(O) result in the production of H2, the energy barrier for this reaction is 34.14 kcal/mol. Compared to dark conditions, RuB@B-g-C3N4 exhibits higher catalytic activity under light irradiation, the reaction time from 9′20″ reduce to 8′. This shows that there is a synergistic effect between photocatalytic AB methanolysis and conventional metal catalyzed AB methanolysis in the RuB@B-g-C3N4 catalytic system. The study provides the novel way for the development of dual-function catalysts combining metal catalysis and photocatalysis through Ru and B modification of g-C3N4.

Photovoltaic properties of alkali metal X (X=Li, Na, K, Rb, Cs) doped defective molybdenum diselenide structures: First principles study

The electronic structure, work function, complex dielectric function, absorption coefficient and reflectivity of defective MoSe2 models containing point defects as well as alkali metal doping have been calculated based on the first principles of density flood theory. The effect of alkali metal doping on the optoelectronic properties of MoSe2 under defect conditions is investigated. Alkali metal elements were doped separately on the basis of a single Se atom defect, and the results show that the doped systems can all be stable. The introduction of the defect decreases the band gap of MoSe2 from 1.498 eV to 0.816 eV. The alkali-metal-doped defective MoSe2 systems have semiconductor-metal transitions with collisions between the bottom of the conduction band and the top of the valence band for each of the systems, except for the K doping. The K-doped defective MoSe2 is a narrow band gap semiconductor with a band gap of 0.202 eV. Overall, alkali metal doping under defective conditions improves the electrical conductivity of MoSe2, resulting in enhanced conductivity of the crystal. The work function analysis reveals that the work function of the alkali metal doped defective MoSe2, except for K doping, decreases gradually with the increase of its atomic radius, while the electrical conductivity of each system is enhanced. Optical property analyses revealed that the absorption coefficient of alkali-metal doped defective MoSe2 was significantly higher than that of intrinsic MoSe2 in the infrared light region, which compensated for the lack of zero absorption of the intrinsic material in the infrared light region, and enhanced its light-absorbing ability in the infrared light region and part of the visible light region. The reflectivity of each defective MoSe2 system doped by alkali metals is much smaller than that of the intrinsic, and the reflection peaks are red-shifted in the direction of the low-energy region. Overall, the doping of alkali metal atoms reduces the average reflectivity of the defective MoSe2 materials, which is conducive to the enhancement of light absorption and photoelectron emission from the materials. It is hoped that the research results in this paper will contribute to expanding the potential applications of MoSe2 materials in solar cells, photovoltaic devices, and photodetectors.

Effect of metal doping on the laser induced damage of KDP crystals: A first-principles study

KH2PO4 (KDP) crystal is a kind of widely used nonlinear optical material, but its manufacturing process produces various defects which influence the laser induced damage threshold (LIDT) of the KDP crystal. This work studies the influence of the metal doping defects (Na, Cr, Co, Ni, Zn and Pb) on the stability, electronic structure, optical and mechanical properties of KDP crystal by the density functional theory (DFT) calculation. Results show that the change of lattice parameters and bond lengths, and the formation energies of the metal doped KDP have close relationship with the radius of the doped metal atoms. The electronic and optical calculations show that the Na doping defects have little effect on the energy band and optical properties of KDP crystals, but Cr, Zn and Pb doping defects show large optical absorption peaks. Meanwhile, the Cr, Co, Ni and Pb atoms have great influence on the mechanical properties of the KDP. Therefore, the KDP synthesis process needs to pay particular attention to control Cr and Pb doping defects to avoid decreasing the LIDT of KDP. This work explains the effect of metal doping on the laser damage resistance of KDP crystals and provides a theoretical basis for enhancing the performance of KDP crystals.

Introducing active sites and regulating electron distribution to design Mo and P co-doped Ni for efficient alkaline hydrogen evolution reaction

NiMoP electrocatalysts for hydrogen evolution reaction (HER) are received widespread concern, but the mechanism of Mo/P atoms for improving the HER activity still need to be revealed in details. Herein, we synthesize the Mo/P co-doped Ni (NMP) electrocatalysts, and the alkaline HER performances are tested. The NMP exhibit the excellent activity, durability and stability of material characters. Based on the results of experiments and density functional theory calculations, it is found that the introduced P atoms can regulate the electron redistribution, which can result in enhancing the reaction kinetic, increasing the active sites and charge exchange capacity. Besides, it leads the doped Mo to become the active site in both Volmer and Heyrovsky processes, and Ni bonded to Mo and Ni atoms exhibit the increasing activity. The obtained results display a deeper understanding for the doped metal and non-metallic atoms in enhancing HER activity of Ni, which is of great significant for designing the highly efficient and inexpensive electrocatalysts for producing hydrogen.

Zn-assisted low-temperature reconstruction of NiCo heterogeneous catalysts for lithium-oxygen batteries

Developing catalysts with high catalytic activity and durability is an effective strategy for improving the electrochemical performance of lithium-oxygen batteries (LOBs). Metal atom doping and heterostructure construction have shown great potential in catalysis and are expected to be widely used in energy storage. In this study, a Zn-doped NiCo2O4/NiO heterostructured complex catalyst is designed and prepared as a cathode catalyst for LOBs. This metal-doped heterostructured complex catalyst, prepared at a lower annealing temperature, retains the most active sites. Additionally, the three-dimensional hollow structure of the catalyst not only facilitates mass transfer but also provides active sites through doping and heterostructure formation. The Zn-doped NiCo2O4/NiO catalyst exhibits excellent catalytic performance, resulting the generation of a silky Li2O2 discharge product film, and the higher adsorption energy for the intermediate product LiO2 also allows the discharge product to be tightly bound to the catalyst. The improved contact between the discharge products and the catalyst's active sites, along with the increased surface area, enhances charge transport and decomposition properties, leading to good reversibility of the LOB. Consequently, the LOB based on Zn-doped NiCo2O4/NiO heterostructure complex catalyst features high discharge capacity (12160 mAh/g at 200 mA g−1) and excellent durability (353 cycles, ∼1765 h). Furthermore, theoretical calculations show that the Zn-doped complex heterostructures have enhanced reaction kinetics of OER and ORR. This straightforward method of producing metal-doped heterostructured complex catalysts that induce uniform Li2O2 deposition valuable insights for enhancing the performance of LOBs.

First-Principles Studies on Transition Metal Doped Mo2B2 as Anode Material for Li-Ion Batteries.

New two-dimensional (2D) transition-metal borides have attracted considerable interest in research on electrode materials for Li-ion batteries (LIBs) owing to their promising properties. In this study, 2D molybdenum boride (Mo2B2) with and without transition metal (TM, TM=Mn, Fe, Co, Ni, Ru, and Pt) atom doping was investigated. Our results indicated that all TM-doped Mo2B2 samples exhibited excellent electronic conductivity, similar to the intrinsic 2D Mo2B2 metal behavior, which is highly beneficial for application in LIBs. Moreover, we found that the diffusion energy barriers of Li along paths 1 and 2 for all TM-doped Mo2B2 samples are smaller than 0.30 and 0.24 eV of the pristine Mo2B2. In particular, for 2D Co-doped Mo2B2, the diffusion energy barriers of Li along paths 1 and 2 are reduced to 0.14 and 0.11 eV, respectively, making them the lowest Li diffusion barriers in both paths 1 and 2. This indicates that TM doping can improve the electrochemical performance of 2D Mo2B2 and that Co-doped Mo2B2 is a promising electrode material for LIBs. Our work not only identifies electrode materials with promising electrochemical performance but also provides guidance for the design of high-performance electrode materials for LIBs.

MOF-derived nanocarbon materials for electrochemical catalysis and their advanced characterization

Because of the demand for clean and sustainable energy sources, nanocarbons, modified carbons and their composite materials derived from metal-organic frameworks (MOFs) are emerging as distinct catalysts for electrocatalytic energy conversion. These materials not only inherit the advantages of MOFs, like customizable dopants and structural diversity, but also effectively prevent the aggregation of nanoparticles of metals and metal oxides during pyrolysis. Consequently, they increase the electrocatalytic efficiency, improve electrical conductivity, and may play a pivotal role in green energy technologies such as fuel cells and metal-air batteries. This review first explores the carbonization mechanism of the MOF-derived carbon-based materials, and then considers 3 key aspects: intrinsic carbon defects, metal and non-metal atom doping, and the synthesis strategies for these materials. We also provide a comprehensive introduction to advanced characterization techniques to better understand the basic electrochemical catalysis processes, including mapping techniques for detecting localized active sites on electrocatalyst surfaces at the micro- to nano-scale and in-situ spectroscopy. Finally, we offer insights into future research concerning their use as electrocatalysts. Our primary objective is to provide a clearer perspective on the current status of MOF-derived carbon-based electrocatalysts and encourage the development of more efficient materials.

Controlled Sequential Doping of Metal Nanocluster.

Atomically precise doping of metal nanoclusters provides excellent opportunities not only for subtly tailoring their properties but also for in-depth understanding of composition (structure)-property correlation of metal nanoclusters and has attracted increasing interest partly due to its significance for fundamental research and practical applications. Although single and multiple metal atom doping of metal nanoclusters (NCs) has been achieved, sequential single-to-multiple metal atom doping is still a big challenge and has not yet been reported. Herein, by introducing a second ligand, a novel multistep synthesis method was developed, controlled sequential single-to-multiple metal atom doping was successfully achieved for the first time, and three doped NCs Au25Cd1(p-MBT)17(PPh3)2, Au18Cd2(p-MBT)14(PPh3)2, and [Au19Cd3(p-MBT)18]- (p-MBTH: para-methylbenzenethiol) were obtained, including two novel NCs that were precisely characterized via mass spectrometry, single-crystal X-ray crystallography, and so forth. Furthermore, sequential doping-induced evolutions in the atomic and crystallographic structures and optical and catalytic properties of NCs were revealed.