Donor-acceptor Interactions Research Articles

Dual-Redox Responsive Interfaces Based on Donor-Acceptor Interactions.

Nanoparticle surfactant (NPS) is a highly competitive means for stabilizing liquid-liquid interfaces, endowing interfacial assemblies with functionalities, and enabling the construction of all-liquid devices. Integrating different types of supramolecular interactions into NPSs would open possibilities to generate interfaces that are responsive to multiple stimuli. Here, by using donor-acceptor interactions between polydopamine nanoparticles (PDA NPs) and methyl viologen (MV2+) terminated polystyrene, the formation, assembly, and jamming of a supramolecular NPS at the water-toluene interface is demonstrated. Harnessing the redox properties of both catechol and MV2+, the dual-redox responsiveness can be achieved, allowing the reconfiguration of NPS-based structured liquids. Using NPS as an emulsifier, oil-in-water (O/W), water-in-oil (W/O), and oil-in-water-in-oil (O/W/O) Pickering emulsions can be obtained in one step, which exhibit smart responsiveness to redox reagents. Taking advantage of the adsorption capacity of PDA NPs, the purification of dye-polluted water can be achieved through O/W Pickering emulsions. We envision that this unique dual-redox responsive biphasic system would hold great potential for developing sophisticated controlled-release systems as well as other intelligent, functional materials.

Spectroscopic, quantum computational, molecular dynamic simulations, and molecular docking investigation of the biologically important compound-2,6-diaminopyridine

To establish the role in future drug development, 2,6-diamino pyridine (2,6-DAP) was investigated experimentally using computational tools. NMR (1H,13C), FTIR, and UV–Vis spectra were analyzed for the titled compound. The molecular structure was optimized via DFT with the “B3LYP method with 6-311++G(d,p)” The optimized parameters of the structure were assessed with the observed bond characteristics. The vibrational frequencies were studied, PED was carried out, and the calculated vibrational frequency obtained was compared with the experimentally obtained FTIR. NMR (1H,13C) was calculated and compared with the experimentally obtained spectra. UV–vis spectra are calculated in the gaseous phase and different mediums of solvents (methanol, DMSO) by employing the PCM solvent model and TD-DFT method, and the estimated value was compared with experimentally measured data. NBO analysis was done to study the donor-acceptor interaction. The extent of electron charge transfer inside the molecular structure was examined using HOMO–LUMO energy values. The study of excitation analysis led to the creation of E.D.D and H.D.D maps in methanol and DMSO. The AIM and ELF analysis was employed to compute the iso-surface projections, ellipticity, and binding energies. The MEP and Fukui functions evaluate the molecule’s reactive zones. Hirshfeld research was done to analyze interactions among the molecules in the structure of the crystal, and 3D Hirshfeld tops and 2D fingerprint layouts were developed. The molecular docking procedure was used, followed by a 100 ns MD simulation and computation of binding free energy found to delineate the binding affinity of the molecule toward human carbonic anhydrase II (HCA II). Molecular docking studies with several receptor proteins were also conducted to determine the most effective protein-ligand interactions. Biological assessments like drug-likeness also act upon the compound to verify the molecule’s drug-like nature.

Fe3O4 nanoparticles decorated on N-doped graphene oxide nanosheets for elimination of heavy metals from industrial wastewater and desulfurization

Finding an effective and excellent pertinent single catalyst material for multipurpose application for the purification of hydrocarbons in fuels (desulfurization), and for efficient removal of heavy metals from industrial effluent is greatly endowed. In the present work, a hybrid nanocomposite of ultrafine magnetite (Fe3O4) nanoparticle embedded on the surface of in-situ nitrogen doped layered GO (NGO) sheets were fabricated by sol-gel method and treatment with microwave irradiation technique is reported for the first time. The results show a high removal efficiency of 97 % for multiple heavy metals (Pb2+, Cd2+, Cu2+, Cr+2, Mn+2etc.) in industrial effluent and as well as in synthetic water with a very good retention performance of 99 %. The composites were tested against the elimination of sulfur from thiophene is 1.495 mmol g−1 is reported high is due to coupling and coordination of nitrogen with FeO and C. Recycling studies showed that the developed composites had excellent recyclability, with <82 % removal at the 5th cycle; its feasibility was evaluated using industrial effluent water and in synthetic water. Surface phenomena studies presented here revealed that the adsorptive removal processes of heavy metals involved π electron donor-acceptor interactions, ion exchange, and electrostatic interactions, along with surface complexation that showed an excellent synergism. A high stability, and retention performance is better than the pure Fe3O4 and NGO sheets. We hope that this study will motivate and give further scope for scientists working on magnetite-based graphene nanocomposites.

Interacting Emission Species among Donor and Acceptor Moieties in a Donor-Grafted Polymer Host/TADF-Guest System and Their Effects on Photoluminescence and Electroluminescence.

Thermally activated delayed fluorescence (TADF)-based electroluminescence (EL) devices adopting a host/guest strategy in their emitting layer (EML) are capable of realizing high efficiency. However, TADF emitters composed of donor and acceptor moieties as guests dispersed in organic host materials containing a donor and/or an acceptor are subject to donor-acceptor (D-A) interactions. In addition, electron delocalization between neighboring emitter molecules could form different species of aggregates. Here, we investigate the effects of intermolecular interacting emission species on the optoelectronic properties of sky-blue/green/red (sB/G/R) TADF emitters as guests using poly(biphenyl-Si/Ge) grafted with various donor moieties as hosts. We found the presence of guest/guest exciplex (Dg/Ag)*, host/guest exciplexes (Dh/Ag)*, and aggregates through the exploration of interactions between neighboring TADF guest molecules and between host and TADF-guest molecules. The nonradiative 3(Dh/Ag)* (ΔEST ≈ 0.5 eV) could increase the internal conversion rate (kIC) and reduce delayed luminescence, and both of them could cause a decrease in PLQY. The luminescence of 3(Dh/Ag)* may have a positive or negative effect on PLQY depending on its triplet energy. As the singlet and triplet energies of (aggregate)* are lower than those of (ICT)*, energy transfer from (ICT)* to (aggregate)* could occur. The low PLQY nature of (aggregate)* means that it is more likely to cause quenching in device emission. The emissions from (Dh/Ag)* and (aggregate)* are found to have increased full width at half-maximum and lead to lower emission color purity. Such intermolecular interactions should also occur in host/guest (TADF) systems and nondoped TADF emitter systems and thus are important factors for the molecular design of the TADF emitter and/or its accompanying host for high device efficiency and emission color purity.

Highlighting the adsorption mechanism of a fluoroquinolone antibiotic from wastewater on carbon xerogel by experiments, characterization, modelling and DFT simulation.

The application of a synthesized carbon xerogel (RFX) for the adsorptive removal from water of ciprofloxacin (CPX), a widely used fluoroquinolones-group antibiotic for humans and animals, has been reported in this work. The carbon xerogel was characterized by N2 adsorption-desorption isotherms, FTIR, Raman spectroscopy, TPD studies, elemental analysis, determination of isoelectric point (pHIEP) and scanning electron microscopy (SEM). CPX adsorption experiments were conducted in batch mode, using results obtained with F400 commercial activated carbon for comparison purposes. CPX adsorption kinetics were well-described by the pseudo-second-order model for both adsorbents and by the Elovich model in the case of F400 activated carbon. Therefore, CPX equilibrium adsorption capacity values were of 457 and 72mgg-1 for RFX xerogel and F400 activated carbon, respectively. This significant difference can be attributed to the higher specific surface area and micropores volume values of F400 carbon; in this sense, this material led to a slower CPX kinetic adsorption. Also, the Dual-site Langmuir model best-described the experimental CPX adsorption isotherms in both cases. By the adsorption studies at different solution pH, it could be concluded that several mechanisms, e.g., hydrophobic and π-π interactions, and electrostatic forces highly influenced CPX adsorption capacity. Furthermore, adsorption tests using several environmentally relevant aqueous matrices have been accomplished. In this case, a competitive effect between the natural organic matter (NOM) and the target pollutant occurred in all the tested real matrices, decreasing CPX adsorption capacity, especially remarkable for F400 activated carbon. Finally, Density Functional Theory (DFT) has been used to elucidate the interactions between CPX and adsorbents, finding a high relevance of the π-π electron donor-acceptor interactions in which CPX acts as an acceptor.

Synergism of Computational Simulation Technique and Machine Learning Algorithm for Prediction of Anticorrosion Properties of Some Antipyrine Derivatives.

This study aimed to predict the selected antipyrine compounds' inhibitory efficiencies and anticorrosion properties in a hydrochloric acid (HCl) environment. Molecular descriptors and input variables were obtained using density functional theory (DFT), and the variance inflation factor (VIF) was employed to reduce redundant variables, leading to the selection of seven quantum chemical descriptors as input variables. Using machine learning techniques such as K-nearest neighbor (KNN) and artificial neural network (ANN), a predictive model was built for 39 antipyrine compounds with known corrosion inhibition efficiencies for carbon and low alloy steel in hydrochloric acid solutions. The models' predictive capability was assessed using cross-validation, with the ANN model showing superior performance, achieving a coefficient of determination (R2) value of 0.715 compared to 0.548 for the KNN model. Performance metrics such as the mean square error (MSE), mean absolute error (MAE), and root-mean-square error (RMSE) further confirmed the superiority of the ANN model over the KNN model. The corrosion inhibition efficiencies (CIEs) of the selected antipyrine compounds ranged from 68.78 to 99.79%, with compound A1 demonstrating the highest CIE of 99.79% and compound A3 the lowest, as evaluated by the ANN model. Analysis of Fukui index parameters obtained from the Mulliken population analysis suggested that the nucleophilic and electrophilic sites play a crucial role in the interactions between the inhibitor and the metal atom through electron donor-acceptor interactions. Moreover, the energy of adsorption (Eads) in kcal·mol-1 decreased in the order of A1 (-187.8) > A2 (-132.0) > A2 (-84.4), with the high negative value of Eads indicating strong and spontaneous adsorption. Further analysis using radial distribution functions and molecular dynamics simulations revealed that inhibitor A1 exhibited predominantly chemisorption, inhibitor A2 showed a mixed type, and inhibitor A3 demonstrated predominantly physisorption, aligning well with the results of the predictive studies.

Azatriangulene-Based Conductive C═C Linked Covalent Organic Frameworks with Near-Infrared Emission.

Two near-infrared (NIR) emissive π-conjugated covalent organic frameworks (COFs) pTANG1 and pTANG2 are synthesized using Knoevenagel condensation of trioxaazatriangulenetricarbaldehyde (TATANG) with benzene- and biphenyldiacetonitriles, respectively. The morphology of the COFs is affected by the size of TATANG precursor crystals. Donor-acceptor interactions in these COFs result in small bandgaps (≈1.6eV) and NIR emission (λmax = 789 nm for pTANG1). pTANG1 can absorb up to 9 molecules of water per unit cell, which is accompanied by a marked quenching of the NIR emission, suggesting applications as humidity sensors. p-Doping with magic blue significantly increases the electrical conductivities of the COFs by up to 8 orders of magnitude, with the room temperature conductivity of pTANG1 reaching 0.65Scm-1, the highest among reported C═C linked COFs. 1H NMR relaxometry, temperature-dependent fluorescence spectroscopy, and DFT calculations reveal that the higher rigidity of the shorter phenylene linker is responsible for the more extended conjugation (red-shifted emission, higher electrical conductivity) of pTANG1 compared to pTANG2.

Engineering exciton dissociation and intermolecular charge transfer to boost superoxide radical in conjugated microporous polymers for simultaneous elimination of coexisting contaminants

Simultaneous photocatalytic elimination of coexisting contaminants with polymeric semiconductors are highly urgent for environmental purification. Nevertheless, the insufficient exciton dissociation and charge transfer in polymeric photocatalysts results in unsatisfactory photocatalytic performance. Herein, we proposed a sulfur-contained linkages engineering strategy via regulating donor–acceptor interactions to boost exciton dissociation and intermolecular charge transfer for efficient generation of superoxide radical. With the low exciton binding energy (50.11 meV) and short average lifetime (τavg‑TAS) of the photoinduced exciton (478.1 ps), the resultant BDT-Tr deriving from BDT and 2,4,6-tris(4-bromophenyl)-1,3,5-triazine exhibited efficient exciton dissociation and charge transfer, enabling superior photocatalytic degradation of ofloxacin (∼94.0 % in 2 h) than that of TTP-Tr (∼87 %) and DTT-Tr (∼76 %) when coupled with the uranium (VI) reduction (∼96.0 % in 1 h). This is the first work highlights the photocatalytic removal of coexisting aqueous pollutants with CMPs-based photocatalysts, which might facilitate the exploration of polymeric semiconductors for wastewater purification.

Competitive adsorption of oxytetracycline and sulfamethoxazole by nanosized activated carbon in aquatic environments: Experimental analysis and DFT calculations

Nanosized activated carbon (NAC) is an emerging carbonaceous nanomaterial for water treatment, while oxytetracycline (OTC) and sulfamethoxazole (SMX) coexisting in aquatic environments may undergo competitive adsorption to influence its removal efficiency. This study investigated the competitive adsorption of OTC and SMX onto NAC under different interaction sequence, pH, electrolyte, and water matrix conditions, using experimental analysis and density function theory (DFT) calculations. Adsorption kinetics show that increasing concentration of one antibiotic inhibited the adsorption of another. Faster equilibrium was attained in binary systems than single systems due to competitive adsorption, with pseudo-second-order model providing the best fit in both systems. Adsorption isotherms suggest that NAC exhibited stronger affinity towards OTC (395.26 mg/g) than SMX (232.02 mg/g), with Langmuir model showing satisfactory fitting in both single and binary systems. Sequential adsorption of [NAC + OTC] + SMX was more favored than binary adsorption, aligning with the optimum configuration of SMX--[NAC-OTC±] with binding energy of −57.25 kcal/mol from DFT calculations. Competitive adsorption was preferred within pH 3.2–5.6, where electrostatic attraction existed between NAC and cationic antibiotics. Salting-out, charge screening, and complexation effects from Na+ and Ca2+ influenced competitive adsorption. Optimal removal of OTC and SMX by NAC was achieved in wastewater effluent among four water matrices in both single and binary systems. Hydrogen bonding, π − π electron donor–acceptor interactions, electrostatic interactions, and hydrophobic interactions contributed to adsorption. Sequential change in functional groups of NAC followed − OH → C − H → C − O → C = C and C = C → C − O → C − H → − OH in single and binary systems, respectively. The findings provide valuable insights into the competitive adsorption mechanisms of antibiotics on NAC, highlighting its potential for remediating mixtures of antibiotics in complex aquatic environments.

Bismuth as a Z-Type Ligand: an Unsupported Pt-Bi Donor-Acceptor Interaction and its Umpolung by Reaction with H2.

Establishing unprecedented types of bonding interactions is one of the fundamental challenges in synthetic chemistry, paving the way to new (electronic) structures, physicochemical properties, and reactivity. In this context, unsupported element-element interactions are particularly noteworthy since they offer pristine scientific information about the newly identified structural motif. Here we report the synthesis, isolation, and full characterization of the heterobimetallic Bi/Pt compound [Pt(PCy3)2(BiMe2)(SbF6)] (1), bearing the first unsupported transition metal→bismuth donor/acceptor interaction as its key structural motif. 1 is surprisingly robust, its electronic spectra are interpreted in a fully relativistic approach, and it reveals an unprecedented reactivity towards H2.

Solanum tuberosum leaf extract as an eco-friendly corrosion inhibitor for Q235-steel in HCl medium: Experimental and theoretical evaluation

Solanum tuberosum leaf extract (STLs), used as a biodegradable corrosion inhibitor, was prepared to mitigate the corrosion rate of Q235 steel in HCl medium. The active inhibitory components existing in STLs were tracked by Fourier transform infrared spectroscopy. Electrochemical measurements, morphological characterization and contact angle tests were combined to evaluate the anti-corrosion performance of STLs at various concentrations and different temperatures, and the results show that the addition of STLs can evidently magnify the charge transfer resistance, expand the double layer capacitance at electric/solution interface, and simultaneously reduce the corrosion current density of Q235 steel in HCl medium with the maximum inhibition efficiency of 91.89 %. The adsorption behavior of STLs on steel was investigated using X-ray photoelectron spectroscopy and adsorption models. It is revealed that the molecules of STLs spontaneously bind to the substrate through chemical and physical action, forming a protective layer to block the diffusion pathway of harsh ions. Furthermore, theoretical calculations confirm that Solanum tuberosum leaves components were adsorbed on steel substrates through donor-acceptor interactions.

The adsorption mechanism and optimal dosage of walnut shell biochar for chloramphenicol

Biochar derived from biomass pyrolysis has proven to be an excellent material for pesticide adsorption and can be used as soil amendment for pesticide non-point pollution. However, the adsorption and desorption mechanisms for certain biochar and pesticide are still unclear. In this study, we investigated the properties of biochar derived from walnut (Juglans regia L.) shell (WSB), and used batch equilibrium method to investigate the adsorption and desorption behavior for chlorantraniliprole (CAP). The physical-chemical analysis showed that there were mainly lignin charcoal of alkyl carbon, methoxyl carbon, aromatic carbon, and carboayl carbon as the primary carbon compounds of WSB. The π - π electron donor acceptor interaction, electrostatic interaction, and hydrogen bond were the primary adsorption mechanisms of the WSB adsorption. Batch equilibrium study under 298 K showed that WSB application in the soil significantly improved the adsorption ability for CAP, and the adsorption behavior was a mono-layer adsorption process as Langmuir model fitted the adsorption isotherm data better than the Freundlich model. While Freundlich model analysis showed that WSB addition to the soil changed the isothermal adsorption line from the S style to the L style. The spontaneous degree reaction of sorbents from strong to weak was in the following order: 5%-WSB >7%-WSB >10%-WSB >1%-WSB >3%-WSB > soil > WSB, and the maximum application effect was achieved at 5 % (m/m) WSB dosage mixed with the soil. Therefore, we considered that WSB addition in soil increased its CAP adsorption capacity, and 5 % (m/m) WSB application was the best choice for CAP pollution control. These data will contribute to the adsorption mechanism and the optimal use dosage of WSB for CAP pollution control.

Mechanism of tetracycline sorption on carbon-bentonite

Antibiotics increased industrial production is the reason of their occurrence in wastewater, soils, groundwater, and drinking water. In this regard, treating the environment for pharmaceuticals is one of the urgent environmental challenges. Synthesis of adsorbents using different types of raw materials by the methods of mechanochemical activation makes it possible to significantly increase their sorption capacity due to the accumulation of various kinds of defects in the crystal structure of the adsorbent. We obtained the bentonite-carbon composite using roller-ring vibratory mill with coal-bentonite ratio of 30 : 70 and 50 : 50. However, the nature of the interaction between carbon and bentonite correlates with changes of surface area and porosity. The porous structure parameters of the samples show the mechanochemical activation of the mixture involves their components interactions. The authors studied the structural and chemical changes during the modification of bentonite with activated carbon by analysing the vibrational spectra of carbon, initial, and modified aluminosilicate samples. According to infrared spectroscopy of adsorbents, absorption bands characteristic of Si-O-C bond vibrations occurred. The paper investigates the sorption capacity of mechanochemically modified natural clay mineral Dash-Salakhli bentonite towards tetracycline hydrochloride. Research investigates the kinetics of the process and rapid sorption of tetracycline. The paper provides possible mechanisms of chemisorption due to donor-acceptor interaction and ion-exchange processes.

Phenyl Radical Activates Molecular Hydrogen Through Protium and Deuterium Tunneling.

Activating dihydrogen, H2, is a challenging endeavor typically achieved using transition metal centers. Pure main group compounds capable of this are rare and have emerged in recent decades. These systems rely on synergistic donor-acceptor interactions with H2's antibonding σ* and bonding σ orbital. An alternative (hydrocarbon) radical-mediated activation is problematic, because the H-H bond is stronger (104.2kcalmol-1) than most C-H bonds. Here, we explore using the phenyl radical to tackle this, forming benzene with a C-H bond energy (112.9 kcal mol-1) that provides a thermodynamic driving force. We mainly observe a benzene-HI complex upon photolysis of iodobenzene in an H2-doped neon matrix at 4.4 K despite a barrier of 7.6kcalmol-1, while phenyl radical forms in case of the heavier D2 isotopologue. When D2 molecules are allowed to diffuse, mono-deuterated benzene accumulates within hours. Computations using path integral-based instanton theory highlight that primarily the transferred hydrogen atom is moving during the reaction which greatly increases the tunneling probability. In excellent agreement with the experimental results, we predict significant tunneling rate constants for both isotopologues, H2 and D2, featuring a strong kinetic isotope effect of up to four orders of magnitude at the lowest temperatures.

First-principles study of BC3 monolayer for sensing halomethanes: a computer aided investigation

This research used a method called DFT to study how CH3Br, CH3Cl, and CH3F halomethanes stick to boron carbide (BC3) nanosheets, with and without gallium and aluminum doping. Geometric optimisation was conducted for all structures using the B3LYP/6-311 + G (d) method. Furthermore, three different methods were employed to calculate the energy: M06-2X, ωB97X-D3, and CAM-B3LYP/6-311 + G(d). NBO and the QTAIM analysis was conducted to evaluate the WBI, partial natural charge, and donor–acceptor interactions within the molecules. The adsorption energy results showed that adding gallium to BC3 made it best at adsorbing stuff, while BC3 without any additives absorbed the least. However, CH3Cl stuck best to the aluminum-doped BC3 and least to the plain BC3 because it had less energy holding onto it. Also, CH3Br stuck to the nanosheet surfaces the most, while CH3Cl stuck the least. BC3(Ga)NS was discovered to be better at detecting halomethanes than BC3(Al)NS and BC3NS. Also, when the halomethanes were absorbed, the doped nanosheets experienced big changes in their electronic behaviour. The energy gaps for BC3NS, BC3(Al)NS, and BC3(Ga)NS were found to be 3.5%, 15.2%, and 13.6%, respectively. Gallium and aluminum mixed with BC3 seem good for making new sensors to detect halomethanes.

Enhanced removal of tetracycline by vitamin C-modified cow manure biochar in water

Vitamin C (VC), due to its chemical properties, can provide more oxygen-containing functional groups such as hydroxyl groups for biochar (BC), which promotes the adsorption of tetracycline on biochar. Therefore, in this study, cow dung biochar (CDBC) was modified with VC and VC-modified CDBC (CDBC-VC) was synthesized. The modified biochar was characterized and related factors, adsorption kinetics, isotherms and adsorption mechanisms were investigated. Adsorption kinetics indicate a fast rate of adsorption. The adsorption isotherms showed that the maximum adsorption capacity was 31.72 mg/g (CDBC) and 50.90 mg/g (CDBC-VC), respectively, and the adsorption process was inhomogeneous with multiple molecular layers and the adsorbent has a higher affinity. Mechanistic studies showed that hydrogen bonding interactions, π-π electron donor-acceptor interactions, hydrophobic interactions, and electrostatic interactions were the key to the adsorption process. The analysis of adsorbent regeneration showed that CDBC-VC had good adsorption performance. CDBC and CDBC-VC showed the best performance in simulated industrial wastewater with removal rates of 78.81% and 93.69%. The adsorption mechanism was comprehensively analyzed using six machine learning models. The extreme gradient boosting model gave the best fit. Analysis of the weights of the input variables for predicting adsorption efficiency showed that the ratio of initial TC concentration to BC dosage (29.8%), specific surface area (23%), isoelectric point (8.8%), and ash content (7.7%) had a significant effect on the predicted results.

Singlet oxygen generation by nanoassemblies containing porphyrin macrocycles: Steric and screening effects, energy transfer and competing processes

In this semi-review paper, we discuss some principal aspects that should be taken into account upon quantitative analysis of the interaction with molecular oxygen O2 and the singlet oxygen (1O2 or [Formula: see text] generation by various tetrapyrrolic photosensitizers (including monomers, chemical dimers, triads, pentads and organic-inorganic nanoassemblies). In all cases, the direct experimental measurements of 1O2 emission at [Formula: see text] = 1.27 μ need to be corrected to the solvent influence (refractive indexes, molecular polarizability) on the rate constant of the radiative transition [Formula: see text] in a 1O2 molecule. For porphyrin and chlorin chemical dimers, T1 states quenching by O2 followed by 1O2 generation depends on donor-acceptor interactions between the dimer halves, and extra-ligation effects as well as the spacer flexibility. In the case of self-assembled triads and pentads containing Zn-porphyrin dimers and pyridyl substituted porphyrin free bases (H2P) as extra-ligands, quenching rate constants of H2P T1 states by O2 are smaller compared to those found for individual monomeric H2P molecules which is explained by the spatial screening influence of a strongly quenched Zn-porphyrin dimer in multiporphyrin complexes. Finally, at 293 K for nanoassemblies of two types (semiconductor quantum dots CdSe/ZnS + coordinative linked tetra-pyridyl porphyrins, and semiconductor negatively charged quantum dots AgInS/ZnS + positively charged porphyrin molecules) it was quantitatively shown that non-radiative energy transfer FRET quantum dot [Formula: see text] porphyrin (competing with electron tunneling under conditions of quantum confinement) is only responsible for the singlet oxygen 1O2 generation by nanoassemblies.

Molecular-Scale Interactions in the Choline Chloride-Ethylene Glycol Deep Eutectic Solvent System: The Importance of Chromophore Charge in Mediating Rotational Dynamics.

We report on the rotational diffusion dynamics of three chromophores (disodium fluorescein, oxazine 725, and perylene) in a series of choline chloride-ethylene glycol (ChCl:EG) deep eutectic solvent (DES) systems. We observe behavior independent of DES bulk viscosity for the cationic and neutral probes and behavior that is consistent with stick-limit interactions for the modified Debye-Stokes-Einstein model for the anionic probe. This finding indicates that the anionic species is integral to the interactions between DES constituent species that are responsible for local organization, consistent with previous MD simulations that showed higher interaction energies associated with both the hydrogen bond donor (EG) and hydrogen bond acceptor (Ch+) interactions with Cl- in ChCl:EG mixtures. The reorientation data reported here also indicate a region around 15 mol % ChCl where the stoichiometric relationship between the species gives rise to changes in the details of intermolecular interactions.

High‐Efficiency Near‐Infrared Iridium(III) Complexes with Tailored Ligands for Solution‐Processed OLEDs with Maximum EQE of 3.75% at 830 nm

AbstractThe development of highly efficient pure near‐infrared (NIR) emitting organic materials with emission beyond 800 nm is extremely challenging due to the limitation of the energy gap law. Herein, three efficient NIR emitting iridium(III) complexes are developed adopting pyrido[3,4‐b]pyrazine derivatives as the cyclometalated C^N ligands, namely (Epptt)2Iracac (1), (pptt)2Iracac (2), and (ppCz)2Irtmd (3). Due to the enhanced donor–acceptor interaction inside the ligand, the conjugation‐extended and electron‐richer N‐phenylcarbazole unit at the C‐part of the ligands endows complex 3 with a large bathochromic shift of emission peak from 796 to 862 nm in toluene solution, compared with thieno[3,2‐b]thiophene C‐part in complex 2. The solution‐processed OLEDs based on complex 3 achieved a record high maximum external quantum efficiency of 3.75% and low efficiency roll‐off with the emission peak at 830 nm, a champion efficiency in the Ir(III) based OLEDs with emission peak exceeding 800 nm. This work opens a new avenue for the development of high‐efficiency pure NIR organic emitters based on Ir(III) complexes for various applications.

Enhancing Donor–Acceptor Interaction and Framework Stability by the Povarov Reaction for Photocatalytic H2O2 Production

Enhancing Donor–Acceptor Interaction and Framework Stability by the Povarov Reaction for Photocatalytic H₂O₂ Production