Domestic Laundering Research Articles

The transfer of spermatozoa onto children’s underwear during normal domestic laundering activities

In cases of sexual assaults involving children, biological evidence such as semen is often found on clothes rather than on intimate swabs. Two cases involving young girls were submitted to one of the AFSP BFF forensic science laboratories instigating further research into the background levels of semen on children’s underwear after being laundered, without sexual acts occurring. This study considered the potential for background levels of semen in the washing machine and the levels of semen transferred with varying laundry storage and washing arrangements. The results concur with previous studies that low levels of spermatozoa can transfer during washing; however, this study demonstrated that background levels of semen can be present on children’s clothing during domestic laundering activities which include male underwear when there are sexually active males within the household. Further, that semen can persist in the washing machine even after three washes. This study has produced data which will assist forensic scientists to evaluate cases of child abuse in a domestic setting.

Assessing the contribution of sewing threads to microfiber release during domestic laundering

Environmental science studies from the past decade have emphasized that microplastics in aquatic environments are mostly caused by domestic laundering of synthetic textiles. Although many studies have explored the microfiber release behavior of fabrics washed in laundry, attempts to witness microfiber release from sewing threads, which are an inevitable part of any finished garment, are meager. With this research gap, this study attempted to analyze the potential of sewing threads to release microfibers during washing and the extent to which they can contribute to the overall microfiber release during domestic laundering. The study's findings revealed an average release of 2.65 ± 0.70 (n = 33) microfibers/m from the sewing thread sewn on the fabric during laundering. The sewing process was noted to cause damage to the sewing thread, which led to a comparatively higher microfiber release (∼114%) compared with the sewing threads that were washed before sewing. Among the selected sewing threads, higher microfiber emissions were reported with spun threads, followed by twistless filaments, and twisted filament threads. The results showed that coarser sewing threads with higher Tex values released more microfibers than finer Tex threads. Compared to the 20 Tex spun thread, the 80 Tex spun thread showed a 22–150% increase in microfiber release. In the case of filament sewing thread, a similar impact was noted, whereas the role of twist was found to be efficient in reducing microfiber emission. Compared to the untwisted filaments, the ply twisted filaments exhibited approximately 76% lower microfiber emissions. The findings of this study showed that sewing thread contributed approximately 1.09% of the total microfiber emissions from apparel during laundry.

Nonleaching Antimicrobial Cotton Fabrics Finished with Hyperbranched Polylysine.

The choice of the antimicrobial agent and finishing process is very important for the activity, durability, and safety of antimicrobial fabrics. Here, a novel antimicrobial cotton fabric (HPL-CF) was constructed by covalently bonding an antimicrobial agent, hyperbranched polylysine (HPL), onto the surface of a cotton fabric (CF) pretreated with a silane coupling agent, 3-chloropropyltrimethoxysilane (CPTMS). The multiple amino groups contained in the periphery of HPL make it possible to react with the CF to form multiple bonds, which is beneficial to improve the durability and safety of HPL-CFs. The obtained HPL-CFs exhibited excellent antimicrobial activities against Escherichia coli (E. coli, Gram-negative bacteria), Staphylococcus aureus (S. aureus, Gram-positive bacteria), and Candida albicans (C. albicans, fungi) even when the CF was treated with HPL solution at the concentration of 0.5 wt %. HPL2.0-CFs maintained 98, >99, and >99% of antimicrobial ratios for E. coli, S. aureus, and C. albicans, respectively, after 50 equiv of domestic laundering cycles, surpassing the requirements of the AAA class. The halo method, cell compatibility, and skin irritation assays all prove the fine safety of HPL-CFs. This work demonstrates the great advantages of applying HPL in the antimicrobial finishing of fabrics.

Mind the (reporting) gap—a scoping study comparing measured laundry decisions with self-reported laundry behaviour

PurposeMany environmental assessments of consumer products and household services rely on self-reported data. Life cycle assessments of domestic laundering are no exception. However, potential discrepancies between self-reported behaviour and actual everyday decisions are seldom investigated due to practical challenges in collecting relevant data. This means that environmental impacts relying on such self-reported data are much more uncertain than previously acknowledged.MethodLaundering data was collected at the Chalmers’ HSB Living lab (CHSBLL), a combined multi-family house and research facility in Gothenburg. The collection was both done passively (through the washing machines) as well as actively (through surveys to the tenants). RFID-readers were also installed in the machines and a number of clothing items tagged, allowing for identification. The site-specific data was later supplemented with a large statistical representative study for domestic laundering of Swedish households. This unique data quality allowed the comparison of passively collected data with survey data from tenants in a real-life setup, while validating the results from a national perspective.Result and conclusionsThe results suggest that consumers have trouble remembering personal choices regarding domestic laundering, meaning that self-reported data are more uncertain than previously thought. In general, the participants overestimated the amount of laundry they washed and underestimated their frequency of washing. Additionally, many participants showed an interest in changing to alternative wash programs although this change failed to materialize when they were presented with this option in real-life. The findings have potential consequences for environmental assessments and implicate those previous estimations underestimate emissions per kg laundry washed.

Microfiber mitigation from synthetic textiles - impact of combined surface modification and finishing process.

The use of proper mitigation strategies to control the impact of microfiber pollution is need of the hour requirement. Though several laundry aids were developed to reduce the environmental impact caused by synthetic microfiber, due to the lack of awareness among the public, their effectiveness was limited. Hence, the mitigation measures at the production stage of textile materials can be a proactive solution with greater effectiveness in mitigating the issue at different stages rather than focussing only on domestic laundering. In this aspect, few recent attempts have been made to control the microfiber release from textiles by the surface finishing process. Thus, the current research focused on utilizing the surface modification process and surface finishing process to reduce the microfiber release behavior of knitted polyester fabrics. In this study, polyester knitted fabric (PES) was surface finished with chitosan (PES-Ch), sericin (PES-Se), and polyvinyl alcohol (PES-PVA), and their effectiveness in reducing microfiber shedding during laundry was analyzed. These finishes are applied directly on the polyester fabric and also after surface modification by alkali (Al) and enzyme (En) pre-treatments. The results reported that at the first wash, directly finished samples showed a reduction of 30-40% in microfiber shedding, and the samples finished after alkali pre-treatment showed a significant reduction of 47-84.29% (p < 0.05). Reduction in microfiber release was noted in the order of chitosan finish with alkali pre-treatment (PES-Al-Ch) > chitosan finish (PES-Ch) > sericin finish with alkali pre-treatment (PES-Al-Se) > polyvinyl alcohol finish with alkali pre-treatment (PES-Al-PVA) > polyvinyl alcohol finish (PES-PVA) for both fiber count and mass. In the case of enzyme pre-treatment, no reduction was reported, irrespective of the finishes applied. Repeated wash test results showed that the finishes could withstand and effectively control the microfiber release from the polyester fabric even after 20 washes. The performance of PES-Al-Ch fabric was superior among other modifications up to the fifth wash (with an 83.55% reduction in microfiber release). At extended washes like the 15th and 20th wash, the performance of PES-Al-PVA fabric was found to be better, with 94% and 95% microfiber reduction, respectively.

Quantification of microfibre release from textiles during domestic laundering

Domestic laundering of textiles is being increasingly recognised as a significant source of microfibre pollution. Reliable quantification of microfibre release is necessary to understanding the scale of this issue and to evaluate the efficacy of potential solutions. This study explores three major factors that influence the quantification of microfibres released from the domestic laundering of textiles: test methodologies, laundering variables, and fabric variables.A review of different test methods is presented, highlighting the variation in quantification created by using different methodologies. A reliable and reproducible method for quantifying microfibre release from domestic laundering is used to explore the impact of laundering and fabric variables experimentally. The reproducibility and reliability of the method used was validated through inter-laboratory trials and has informed the development of European and international testing standards. Our results show that increasing the wash liquor ratio and wash agitation results in a greater mass of microfibres released, but we found that fabric variables can have a greater influence on microfibre release than the laundering variables tested in this study. However, no single fabric variable appeared to have a dominant influence.Using the data obtained and assumptions for washing load size and frequency, results were scaled to reflect possible annual microfibre release from untreated domestic laundering in the UK. Depending on different laundering and fabric variables, these values range from 6490 tonnes to 87,165 tonnes of microfibre discharged in the UK each year.

Detection, characterization and possible biofragmentation of synthetic microfibers released from domestic laundering wastewater as an emerging source of marine pollution.

Synthetic microfibers are universally recognized as an emerging pollutant in all ecosystems. The present investigation focuses on the evaluation and quantification of synthetic microfiber released from domestic laundering wastewater from different regions of Bhubaneswar city of Odisha state of India. The estimated number of microfibers collected from 500ml of sample varied from 200 to 500 in numbers with an average amount of biomass in the range of 0.4-4g. The surface morphology of the samples was assessed by Scanning Electron Microscopic analysis which revealed that the fibers were having a length of approximately 10-30mm and diameter of 10-20μm. Carbonyl (CO) stretching band at 1711cm-1 and Aldehyde (CH) Weak bond at 2917.38cm-1 absorption were recorded from Fourier transform infrared spectroscopic analysis. As microfibers released from synthetic apparels are major source of environmental microplastic pollution their precise detection could help in controlling this problem.

Virucidal Efficacy of Laundering.

Viruses contribute significantly to the burden of infectious diseases worldwide. Although there are multiple infection routes associated with viruses, it is important to break the chain of infection and thus consider all possible transmission routes. Consequently, laundering can be a means to eliminate viruses from textiles, in clinical settings well as for domestic laundry procedures. Several factors influence the survival and inactivation of microorganisms, including viruses on hard surfaces and textiles. Therefore, textiles should be regarded as potential fomites. While in clinical and industrial settings laundry hygiene is ensured by standardized processes, temperatures of at least 60 °C and the use of oxidizing agents, domestic laundry is not well defined. Thus, the parameters affecting viral mitigation must be understood and prudently applied, especially in domestic laundering. Laundering can serve as a means to break the chain of infection for viral diseases by means of temperature, time, chemistry and mechanical action.

Designing textile accessories from coffee ground

Excessive consumption of natural resources restricts raw material production and threatens future generations' access to these resources. Therefore, most of the famous fashion and textile brands are used bio-based materials such as orange, banana, pineapple, coffee ground, etc. In this study, buttons are designed from the coffee waste collected from a local coffee house from an automatic espresso coffee machine located in Turkey for the completion of garments in the fashion industry. Coffee grounds are mixed with corn starch, glycerine, bio-epoxy resin and hardener with adequate concentrations. Bio-waste button is designed according to a mostly used circular shape. Colour fastness tests are performed to evaluate the quality of fabric such as appearance, stain release, water resistance, and colour fastness to domestic laundering and drying procedures. As a result, designed natural accessories can be adopted not only as environmentally friendly but also as cost-effective solutions for manufacturing other accessories used in the fashion industry. At the end of the domestic laundering, at the first three washing cycles, it is observed that there is no visible wear discolouration, flexibility or deformations

Health care worker knowledge and attitudes towards uniform laundering during the COVID-19 pandemic

BackgroundThe COVID-19 pandemic raised concerns towards domestic laundering of healthcare worker (HCW) uniforms; this is common practice in countries such as the United Kingdom (UK) and United States. Previous research suggested 4-32% of nurses did not adhere to laundry policies, which could be an infection control risk. This study aimed to investigate the knowledge and attitudes of UK healthcare workers towards domestic laundering of uniforms during the COVID-19 pandemic.MethodsOnline and paper questionnaires were distributed to HCWs and nursing students who regularly wear uniforms. Differences in knowledge between HCWs were analyzed by Chi-squared tests and attitudes were examined using exploratory factor analysis.ResultsAbout 86% of participants (n = 1099 of 1277) laundered their uniforms domestically. Respondents were confident in laundering their uniforms appropriately (71%), however 17% failed to launder at the recommended temperature (60°C). Most participants (68%) would prefer their employer launder their uniforms, with mixed negative emotions towards domestic laundering. Limited provision of uniforms and changing and/or storage facilities were a barrier to following guidelines.ConclusionMost HCWs domestically launder their uniforms, despite a preference for professional laundering. One-fifth of HCWs deviated from the UK National Health Service uniform guidelines; onsite changing facilities were the most significant barrier towards adherence.

An Approach to Estimate Dye Concentration of Domestic Washing Machine Wastewater

Abstract This article focuses on developing a methodology which can be used to estimate the concentration of dyestuff released from textiles during domestic laundering, so that further studies involving decolorization of the wastewater from domestic washing machine can be conducted in an attempt to develop eco-friendly domestic washing processes. Due to the complexity of the problem, an approach was adopted so that, as an initial step, synthetic red and blue reactive dye solutions were prepared as representative wastewater solutions using Reactive Red 195 and Reactive Blue 19 dyestuffs for the estimation of dye concentration. This was followed by an experimental work consisting of washing tests involving the calculation of dye concentration in the wastewater obtained from domestic washing machine as well as tergotometer as a machine simulator. For this part of the work, dyed cotton plain jersey fabric samples were used to obtain wastewater solutions. All the dye solutions and the wastewater samples were measured with VIS spectrophotometer, and the maximum absorbance values were obtained at relevant wavelengths. Although the characteristics of absorbance spectra of synthetic and wastewater solutions were very different, the maximum absorbance values of both solutions overlapped at relevant wavelengths. The concentration of the dyestuff was calculated from the absorbance values measured at 540 and 592 nm for the red and blue, respectively. The statistical analysis of the data suggested that tergotometer can be used as a domestic washing machine simulator. Moreover, the regression analysis done for the dyestuff concentration under discussion revealed that the most significant factor was the washing step (main wash or rinsing) (89.5%) followed by color (red or blue) (3.4%) and washing device (washing machine or tergotometer) (1.5%).

Sharing is caring\xa0-\xa0the importance of capital goods when assessing environmental impacts from private and shared laundry systems in Sweden

PurposePrevious studies on environmental impacts from domestic laundry have tended to focus solely on private washing machines and detergent. However, public procurement guidelines about the construction of laundry spaces may also be important. This article aims to expand the scope of previous work so that it also includes tumble drying and the building space. By doing this, we examine the potential for shared systems (which are common in Sweden) to reduce the environmental impacts of laundry activities, in comparison with consumer choices associated with machine operation (i.e., wash temperature and amount of detergent).MethodsAn LCA model was created using product information data from the European Union. Emissions from building use were taken from Swedish cradle-to-grave reports on energy-efficient buildings. The resulting model was run with additional sensitivity analysis of the variables, and the associated emissions from each of the scenarios were calculated.Results and discussionOn average, greenhouse gas (GHG) emissions for private laundries in Sweden were estimated to be 190 g CO2 eq./kg laundry (washed and dried). If a shared laundry was used instead, the resulting emissions decreased by approximately 26%. The greatest contribution to GHG emissions was the use of detergent (22–33% of total emissions), followed by capital goods (11–38% of total emissions).ConclusionDeciding to construct shared laundries in newly built apartment buildings in Sweden, rather than in-unit machines, would reduce the emissions from domestic laundry for these tenants by approximately 26%. This is because materials used for manufacturing whitegoods, as well as the emissions associated with the building itself, play a much bigger role than previously thought. Additionally, since the cleaning efficiency of warm water and some of the components used in detergents rises with temperature, emissions from domestic laundering could for some consumers be reduced further by washing at higher temperature but with less detergent. This pattern could be seen in Sweden within regions with hard water, where the emissions from domestic laundry could be reduced by 6–12%.

Development of a silver-based dual-function antimicrobial laundry additive and textile coating for the decontamination of healthcare laundry

To repurpose a silver-based antimicrobial textile coating product (Micro-Fresh 1911) as a dual-function antimicrobial laundry additive and textile coating. Survival of Escherichia coli or Staphylococcus aureus type and clinical isolates in a domestic 40°C wash was assessed with and without soiling and biological detergent. Washing with 2% w/v silver additive (wash phase) reduced E. coli and S. aureus by 7·14-8·08 log10 and no cross-contamination was observed. Under dirty conditions, 0·5% silver additive in the rinse phase of a wash with biological detergent reduced E. coli and S. aureus by 7·98-8·40 log10 (0·00-1·42 log10 cross contamination). BS EN ISO 20645:2004 and BS EN ISO 20743:2013 methods were used to assess the antimicrobial activity of polycotton washed with 2% w/v silver additive against S. aureus and E. coli. The treated polycotton was antimicrobial against E. coli and S. aureus type and clinical isolates and remains active after at least one further wash cycle at 40 or 73°C. The silver additive exhibits antimicrobial activity in a 40°C domestic wash, preventing cross contamination onto clean textiles and depositing an antimicrobial coating onto polycotton. The survival of micro-organisms on healthcare uniforms during domestic laundering presents a potential risk of contaminating the home, cross-contamination of other clothing within the wash and transmitting potential pathogens back into healthcare settings via contaminated uniforms. Silver may be useful as an antimicrobial laundry additive to decontaminate healthcare laundry washed at low temperatures in domestic and industrial settings, to therefore reduce the potential risk of transmitting micro-organisms within the domestic and clinical environments.

Risks related to the domestic laundering of filling station attendant uniforms: advances and uncertainties.

Gasoline is the most common transportation fuel in Brazil, with up to 1% of benzene. Benzene is a health-damaging organic solvent that is extensively used worldwide, being classified as a human carcinogen by the International Agency for Research on Cancer (Group 1). Many workers at filling stations are exposed to benzene, present in gasoline. The main routes of exposure and absorption of benzene are inhalation, oral, and dermal routes. The penetration and maintenance of benzene and other chemicals on personal protective equipment and clothing of workers who manipulate these solvents may increase their levels of exposure and offer risks to their family members, since contaminated clothing is laundered at their homes, which goes against legislative framework (Annex 2, Regulatory Standard No. 9). This way, the objective of this work was to discuss the importance of periodic changes and cleaning of filling station attendant uniforms performed by employers as preventive measures against the deterioration of the health of workers and their family members. We performed a narrative review; no systematic criteria were used in the search for national and international studies. After critical reading, we observed a lack of consistent data on this theme. Laundering of uniforms worn by filling station attendants should take place outside the domestic environment in order to protect the health of workers and their family members and avoid possible cross-contamination.

The role of textiles as fomites in the healthcare environment: a review of the infection control risk.

BackgroundInfectious diseases are a significant threat in both healthcare and community settings. Healthcare associated infections (HCAIs) in particular are a leading cause of complications during hospitalisation. Contamination of the healthcare environment is recognised as a source of infectious disease yet the significance of porous surfaces including healthcare textiles as fomites is not well understood. It is currently assumed there is little infection risk from textiles due to a lack of direct epidemiological evidence. Decontamination of healthcare textiles is achieved with heat and/or detergents by commercial or in-house laundering with the exception of healthcare worker uniforms which are laundered domestically in some countries. The emergence of the COVID-19 pandemic has increased the need for rigorous infection control including effective decontamination of potential fomites in the healthcare environment. This article aims to review the evidence for the role of textiles in the transmission of infection, outline current procedures for laundering healthcare textiles and review studies evaluating the decontamination efficacy of domestic and industrial laundering.MethodologyPubmed, Google Scholar and Web of Science were searched for publications pertaining to the survival and transmission of microorganisms on textiles with a particular focus on the healthcare environment.ResultsA number of studies indicate that microorganisms survive on textiles for extended periods of time and can transfer on to skin and other surfaces suggesting it is biologically plausible that HCAIs and other infectious diseases can be transmitted directly through contact with contaminated textiles. Accordingly, there are a number of case studies that link small outbreaks with inadequate laundering or infection control processes surrounding healthcare laundry. Studies have also demonstrated the survival of potential pathogens during laundering of healthcare textiles, which may increase the risk of infection supporting the data published on specific outbreak case studies.ConclusionsThere are no large-scale epidemiological studies demonstrating a direct link between HCAIs and contaminated textiles yet evidence of outbreaks from published case studies should not be disregarded. Adequate microbial decontamination of linen and infection control procedures during laundering are required to minimise the risk of infection from healthcare textiles. Domestic laundering of healthcare worker uniforms is a particular concern due to the lack of control and monitoring of decontamination, offering a route for potential pathogens to enter the clinical environment. Industrial laundering of healthcare worker uniforms provides greater assurances of adequate decontamination compared to domestic laundering, due to the ability to monitor laundering parameters; this is of particular importance during the COVID-19 pandemic to minimise any risk of SARS-CoV-2 transmission.

Microbial Contamination of Medical Staff Clothing During Patient Care Activities: Performance of Decontamination of Domestic Versus Industrial Laundering Procedures.

The efficacy of domestic laundering of healthcare staff clothing is still debated. This study aimed to compare the performance of decontamination of different domestic laundering with that of industrial laundering. Fourteen naturally contaminated white coats of healthcare workers (5 fabric squares from each coat) and fabric squares of artificially contaminated cotton cloth (30 fabric squares per each bacterial strain used) were included. Four domestic laundering procedures were performed; two different washing temperatures (40°C and 90°C) and drying (tumble dry and air dry) were used. All fabric squares were ironed. Presence of bacterial bioburden on the fabric squares after domestic and industrial laundering was investigated. None of the naturally contaminated fabric squares resulted completely decontaminated after any of the domestic washes. At 24, 48, and 72h of incubation, bacterial growth was observed in all the laundered fabric squares. Besides environmental microorganisms, potentially pathogenic bacteria (i.e., Acinetobacter lwoffii, Micrococcus luteus, coagulase-negative staphylococci) were isolated. On the artificially contaminated fabric squares, the bioburden was reduced after the domestic laundries; nevertheless, both Gram-negative and -positive pathogenic bacteria were not completely removed. In addition, a contamination of the fabric squares by environmental Gram-negative bacteria was observed. In both the naturally and artificially contaminated fabric squares, no bacterial growth at all the time-points analyzed was observed after industrial laundering, which provided to be more effective in bacterial decontamination than domestic washes. For those areas requiring the highest level of decontamination, the use of specialized industrial laundry services should be preferred.

An investigation of a wash‐durable solar energy harvesting textile

AbstractThis work demonstrates a novel and sustainable energy solution in the form of a photovoltaic fabric that can deliver a reliable energy source for wearable and mobile devices. The solar fabric was woven using electronic yarns created by embedding miniature crystalline silicon solar cells connected with fine copper wires within the fibres of a textile yarn. This approach of integrating solar energy harvesting capability within the heart of the textile fabric allows it to retain the flexibility, three‐dimensional deformability, and moisture and heat transfer characteristics of the fabric. In this investigation, both the design and performance of the solar cell embedded yarns and solar energy harvesting fabrics were explored. These yarns and resultant fabrics were characterised under different light intensities and at different angles of incident light, a critical factor for a wearable device. The solar cell embedded yarns woven into fabrics can undergo domestic laundering and maintained ~90% of their original power output after 15 machine wash cycles. The solar fabric embedded with 200 solar cells demonstrated here (44.5 mm × 45.5 mm active area) was capable of continuously generating ~2.15 mW/cm2 under one sun illumination and was capable of powering a basic mobile phone. The power generation capability and durability of the solar energy harvesting fabric proved its viability to power wearable devices as an integral part of regular clothing.

Life cycle assessment of innovative circular business models for modern cloth diapers

Brazil, an emerging economy with more than 208 million inhabitants, is currently one of the biggest consumers of disposable diapers worldwide, generating huge waste streams to sanitary landfills or dumps. This take-make-dispose system causes high material and fuel consumption and serious environmental impacts. The concept of the Circular Economy, promoting that material flows should be circular, material and energy efficiency should be maximized and residues, as far as possible, designed out, has continuously gained attention over the last decade. For a Circular Economy, technological innovation, new business models and changes in consumer behavior are needed. The present study compares the use of modern cloth diapers and disposable diapers via a screening Life Cycle Assessment, checking conventional and innovative circular business models for the application of modern cloth diapers, such as the leasing or pay-per-service models, while focusing on the regional context of Brazil. Results indicate that cloth diapers show generally a better environmental performance than disposable diapers, whose poor performance is mainly due to their end-of-life treatment in sanitary or unsanitary landfill, provoking high greenhouse gas emissions. For cloth diapers, the most advantageous product system consists in a diaper-as-service model at large scale, using efficient continuous batch washers for sanitizing the diapers. Diaper-as-service models at smaller scale in so-called on-premise laundries show poorer environmental performance, due to higher water and energy needs. Domestic laundering of diapers is a good alternative regarding its environmental performance, because of its low energy consumption. However, consumers accustomed with disposable diapers might be reluctant to engage with this additional domestic labor.

Extraction of phenolic components from an Aloe vera (Aloe barbadensis Miller) crop and their potential as antimicrobials and textile dyes

The present work focuses on the use of solid and agricultural residues from Aloe vera crops, as a source of antimicrobial agents and textile dyes. The roots from an A. vera plantation post-harvest were extracted with ethyl acetate, purified and phytochemically characterized to obtain five metabolites: aloesaponarin-I (1), deoxyerythrolaccin (2), lacaic acid D methyl ester (3), aloesaponarin-II (4), and aloesaponol-I (5). Acid hydrolysis of the solid industrial residue gave aloe-emodin (6) as the main product with a good yield. All of the components were tested for the first time against phytopathogenic bacteria strains, and deoxyerythrolaccin and lacaic acid D methyl ester were active against Xanthomonas campestris with MIC values of 46.86 and 93.75 μg/mL, respectively. Aloesaponarin-I and aloe-emodin, the main products, were tested as dyes for polyester fabrics using different mordants and pH bath conditions. The colour of each material was investigated in terms of the CIELAB L*, a* and b* values, and the colour fastness to light and washing was investigated according to the Mexican standard methods (NMX-A-074-INNTEX-2005; NMX-A-105-B02-INNTEX-2010). Aloesaponarin-I dyed polyester bright yellow but the final colour was very sensitive to the pH of the dye bath. Aloe-emodin dyed polyester deep yellow, and the fabrics showed good colour fastness to light and to domestic laundering. This study provides evidence that the phenolic components obtained from agricultural residues of the aloe industry can be useful organic alternatives as antimicrobial agents and textile dyes.

Laundry and textile hygiene in healthcare and beyond.

The elimination of microbial contaminations from textile is an important aspect of laundering apart from the removal of stains and dirt from used and worn textiles. Although the framework for institutional laundering is well regulated to ensure hygienic cleanliness via the use of e.g. high temperatures and bleaching agents, there are several open points, especially in domestic laundering. In both cases, energy efficiency of appliances is a main driver for innovation and has resulted in a general decrease in washing temperatures which in turn can impact the antimicrobial efficacy of laundering. Thus, the different factors influencing the input and removal of microbial cells in the laundering process and possible adverse effects of microbial contaminants in the washing machine and on the textiles as well as suitable counteractions are discussed in this article, focusing on the clinical area but also considering the domestic environment, which will gain importance in the future, e.g. by the increase of elderly and ill persons being cared for at home.