Dodecamer Structure Research Articles

Reactive Molecular Dynamics Simulation of the Structural Damages of the B-DNA Induced by the Oxidation/Nitration of Guanine.

Reactive molecular dynamics simulations (RMD) have been carried out to investigate structural alterations of the dodecamer double-strand B-DNA due to the oxidation/nitration modifications introduced to its guanine bases, including 8-oxoguanine, 8-nitroguanine, and 5-guanidino-4-nitroimidazole, considering two distribution patterns. These modifications may arise in the case of cancer treatment using oxidative/nitrosative reactive nitrogen species as anticancer agents. Results show that these mutations affect structural characteristics of the B-DNA dodecamer in the order 8-nitroguanine > 5-guanidino-4-nitroimidazole ≫ 8-oxoguanine. For instance, the base-pair per turn for these modified B-DNA are changed respectively to 9.79, 10.88 and 10.58 from 10.51 in the native defect-free B-DNA, which is compatible with the experimental value of 10.10. In addition, these mutations allow more water molecules to diffuse into the dodecamer structure and consequently increase the possibility of the penetration of reactive and nonreactive species toward constituting nucleic base-pairs. The largest variation of the B-DNA structure is observed for the mutated B-DNA with 8-nitroguanine modifications applied to its separated CG base-pairs along the dodecamer chain. The structural changes introduced by these nitro-/oxo-modified guanine bases can be considered as a critical step in the damage of the DNA structure and alterations of its function.

PEPPSI type complexes: Synthesis, x-ray structures, spectral studies, molecular docking and theoretical investigations

In this work, three novel potent benzimidazolium-derived PEPPSI type palladium complexes, namely dichloro[1-allyl-3-benzylbenzimidazole-2-ylidene]pyridine palladium(II) (1), dichloro[1-allyl-3-(1-naphthylmethyl)benzimidazole-2-ylidene]pyridine palladium(II) (2) and dichloro[1-allyl-3-(9-anthrylmethyl)benzimidazole-2-ylidene]pyridine palladium(II) (3), were synthesized and characterized by single X-ray crystallography, FT-IR and NMR spectroscopy. The results were compared with the relevant calculated data. After structural and spectroscopic determination, the performance of the global reactivity behavior of these derivatives was evaluated by quantum chemical parameters (QCP) obtained from DFT/B3LYP and HF methods utilized with the 6–311 g**/LANL2DZ basis set. Next, NBO analyses were conducted to enlighten the possible interactions that occur for each derivative and this revealed that the main role in the lowering of the stabilization energies of all the derivatives was sourced from n → π* and π → π* interactions. Finally, all the complexes were analyzed for their anticancer potential by the molecular docking method with VEGFR (vascular endothelial growth factor receptor), thioredoxin reductase, breast cancer and the dodecamer structure of DNA.

Stabilization Mechanism for a Nonfibrillar Amyloid β Oligomer Based on Formation of a Hydrophobic Core Determined by Dissipative Particle Dynamics.

Neurotoxicity caused by nonfibrillar amyloid β (Aβ) oligomers in the brain is suggested to be associated with the onset of Alzheimer's disease (AD). Elucidating the structural features of Aβ oligomers is critical for promoting drug discovery research for AD. One of the Aβ oligomers, known as Aβ*56, is a dodecamer that impairs memory when injected into healthy rats, suggesting that Aβ*56 may contribute to cognitive deficits in AD patients. Another dodecamer structure, formed by 20-residue peptide segments derived from the Aβ peptide (Aβ17-36), has been revealed by X-ray crystallography. The structure of the Aβ17-36 dodecamer is composed of trimer units and shows the oligomer antibody A11 reactivity, which are characteristic of Aβ*56, indicating that Aβ*56 and the Aβ17-36 dodecamer share a similar structure. However, the structure of the C-terminal regions (Aβ37-42) remains unclear. The C-terminal region, which is abundant in hydrophobic residues, is thought to play a key role in stabilizing the oligomer structure by forming a hydrophobic core. In this study, we employed dissipative particle dynamics, a coarse-grained simulation method with soft core potentials, utilizing the crystal structure information to unravel Aβ dodecamer structures with C-terminal regions. The simulation results were validated by the reported experimental data. Hence, an analysis of the simulation results can provide structural insights into Aβ oligomers. Our simulations revealed the stabilization mechanism of the dodecamer structure at the molecular level. We showed that C-terminal regions spontaneously form a hydrophobic core in the central cavity, contributing to stabilizing the dodecamer structure. Furthermore, four consecutive hydrophobic residues in the C-terminal region (i.e., Val39-Ala42) are important for core formation.

How metal cofactors drive dimer–dodecamer transition of the M42 aminopeptidase TmPep1050 of Thermotoga maritima

The M42 aminopeptidases are dinuclear aminopeptidases displaying a peculiar tetrahedron-shaped structure with 12 subunits. Their quaternary structure results from the self-assembly of six dimers controlled by their divalent metal ion cofactors. The oligomeric-state transition remains debated despite the structural characterization of several archaeal M42 aminopeptidases. The main bottleneck is the lack of dimer structures, hindering the understanding of structural changes occurring during the oligomerization process. We present the first dimer structure of an M42 aminopeptidase, TmPep1050 of Thermotoga maritima, along with the dodecamer structure. The comparison of both structures has allowed us to describe how the metal ion cofactors modulate the active-site fold and, subsequently, affect the interaction interface between dimers. A mutational study shows that the M1 site strictly controls dodecamer formation. The dodecamer structure of TmPep1050 also reveals that a part of the dimerization domain delimits the catalytic pocket and could participate in substrate binding.

Non-dependence of dodecamer structures on alkyl chain length in Platonic micelles.

When the micellar aggregation number (Nagg) is sufficiently small (Nagg < 30), the micelle shows an abnormal aggregation behavior: monodispersity without any distribution in Nagg, whose values coincide with the vertex number of a regular polyhedral structure, i.e., they are termed Platonic solids. Micelles with these characteristics are named "Platonic micelles". In this study, we investigated the aggregation behavior of calixarene-based micelles bearing primary amines-the first example of Platonic micelles-with increasing alkyl chain length by small-angle X-ray scattering, asymmetrical flow field flow fractionation coupled with multiangle light scattering, and analytical ultracentrifugation measurements. Morphological transition of the micelles from spherical to cylindrical was observed when the alkyl chain length was increased in this calixarene-based micellar system, which is similar to the case of conventional systems and is acceptable in terms of the packing parameter principle. However, although the micellar Nagg normally increases with an increase in the alkyl chain length, the structure of calixarene-based Platonic micelles bearing butyl (C4), heptyl (C5), and hexyl (C6) chains remains at 12-mer. This is presumably due to the relationship between the thermodynamic stability of the Platonic micelles and the coverage ratio defined by the Tammes problem.

Crystal structure of pyridoxal biosynthesis lyase PdxS from Pyrococcus horikoshii.

Pyridoxal 5'-phosphate (PLP) is the biologically active form of vitamin B(6) and is de novo synthesized from three substrates, dihydroxyacetone phosphate (DHAP), riburose 5-phosphate (RBP), and ammonia hydrolysed from glutamine. Glutamine amidotransferase (PdxT) catalyzes the production of ammonia from glutamine, while PdxS catalyzes the following condensation of ribulose 5-phosphate (Ru5P), glyceraldehyde-3-phosphate (G3P), and ammonia. PdxS exists as a hexamer or dodecamer depending on species and makes a 1:1 complex with PdxT. Pyrococcus horikoshii PdxS has a 37 amino acids insertion region, which is found in some archaeal PdxS proteins, but its structure and function are unknown. To provide further structural information on the role of the insertion region, the oligomeric state, and ligand binding mode of P. horikoshii PdxS, the crystal structure of PdxS from P. horikoshii was solved in two forms: (i) apo form, (ii) r ibose 5-phosphate (R5P) complex and the quaternary structure of PdxS in solution was determined by analytical gel filtration. P. horikoshii PdxS forms hexamer in solution based on analytical gel filtration data. When we superimpose the structure of P. horikoshii PdxS with other dodecamer structures of PdxS, the additional insertion is located apart from the active site and induces a steric clash on the hexamer-hexamer interface of PdxS proteins. Our results suggest that the additional insertion perturbs dodecamer formation of P. horikoshii PdxS.

Structure of the partially unliganded met state of 400 kDa hemoglobin: Insights into ligand-induced structural changes of giant hemoglobins

Recent crystallographic studies have revealed the structures of some invertebrate extracellular giant hemoglobins of 3,600 kDa or 400 kDa and their common quaternary structure of dodecameric subassembly composed of four kinds of globin subunits (A1, A2, B1, and B2). These results have provided insight into the mechanisms of their unique functional properties of oxygen binding and sulfide binding. All of these structures were solved with oxygenated or CO-liganded forms at low or moderate resolutions. We have determined the crystal structure of 400 kDa Hb from a polychaete Oligobrachia mashikoi at 1.95 A resolution. The electron densities at higher resolution confirm the existence of an isoform of the B1 subunit because of the inconsistency with the model that was built from the formerly known amino acid sequence. The brownish color of the crystals used in this study and the absorption spectrum from the dissolved crystals strongly indicated that the obtained structure was a ferric met state, whereas complete absence of electron density around the distal heme pockets were observed at the A2, B1, and B2 subunits. We concluded that the obtained structure was in unliganded met forms at three of four globin subunits in the 24mer assembly and in oxygenated forms at the remaining A1 subunits. The partially unliganded structure showed remarkable structural changes at the AB loop regions causing quaternary rearrangements of the EF-dimer structure. In contrast, few changes occurred at the interface regions composed of the E and F helices. These results suggest that the ligand-induced structural changes of Oligobrachia Hb are quite different from those of the well-studied mollusk Hb having the same EF-dimer structure. The structural rearrangements make the dodecameric subassembly form a tighter conformation than those of fully oxygenated or CO-liganded dodecamer structure.

Helicobacter pylori neutrophil-activating protein activates neutrophils by its C-terminal region even without dodecamer formation, which is a prerequisite for DNA protection - novel approaches against Helicobacter pylori inflammation

Helicobacter pylori neutrophil-activating protein (HP-NAP) protects DNA from free radicals as a dodecamer through its ferroxidase activity without, however, directly binding to it. The retardation that was observed at pH 7.5 could be easily attributed to an iron effect, as it was revealed by experiments in the absence of HP-NAP. A total loss of ferroxidase activity, dodecamer formation and DNA protection in environments rich in free radicals was observed after replacement of His25, His37, Asp52 and Lys134, which are located within the ferroxidase site, with Ala. Molecular dynamics simulations revealed that dimer formation is highly unlikely following mutation of the above amino acids, as the Fe(2+) is no longer attracted with equal strength by both subunits. These findings probably indicate that iron plays an important role in the conformation of HP-NAP by initiating the formation of stable dimers that are indispensable for the ensuing dodecamer structure. Very surprisingly, neutrophil activation appeared to be stimulated by structural elements that are localized within the C-terminal region of both mutant HP-NAP and wild-type dodecamer HP-NAP. In particular, the dodecamer conformation does not seem to be necessary for activation, and helices H3 (Leu69-Leu75) and H4 (Lys89-Leu114) or the linking coils (His63-Thr68 and Thr76-Ser88) are probably critical in stimulating neutrophil activation.

Lengsin Is a Survivor of an Ancient Family of Class I Glutamine Synthetases Re-engineered by Evolution for a Role in the Vertebrate Lens

Lengsin is a major protein of the vertebrate eye lens. It belongs to the hitherto purely prokaryotic GS I branch of the glutamine synthetase (GS) superfamily, but has no enzyme activity. Like the taxon-specific crystallins, Lengsin is the result of the recruitment of an ancient enzyme to a noncatalytic role in the vertebrate lens. Cryo-EM and modeling studies of Lengsin show a dodecamer structure with important similarities and differences with prokaryotic GS I structures. GS homology regions of Lengsin are well conserved, but the N-terminal domain shows evidence of dynamic evolutionary changes. Compared with birds and fish, most mammals have an additional exon corresponding to part of the N-terminal domain; however, in human, this is a nonfunctional pseudoexon. Genes related to Lengsin are also present in the sea urchin, suggesting that this branch of the GS I family, supplanted by GS II enzymes in vertebrates, has an ancient role in metazoans.

Dodecamer structure of severe acute respiratory syndrome coronavirus nonstructural protein nsp10.

The severe acute respiratory syndrome coronavirus (SARS-CoV) nonstructural proteins nsp1 to nsp16 have been implicated by genetic analysis in the assembly of a functional replication/transcription complex. We report the crystal structure of nsp10 from SARS-CoV at 2.1-A resolution. The nsp10 structure has a novel fold, and 12 identical subunits assemble to form a unique spherical dodecameric architecture. Two zinc fingers have been identified from the nsp10 monomer structure with the sequence motifs C-(X)2-C-(X)5-H-(X)6-C and C-(X)2-C-(X)7-C-(X)-C. The nsp10 crystal structure is the first of a new class of zinc finger protein three-dimensional structures to be revealed experimentally. The zinc finger sequence motifs are conserved among all three coronavirus antigenic groups, implicating an essential function for nsp10 in all coronaviruses. Based on the structure, we propose that nsp10 is a transcription factor for coronavirus replication/transcription.

Structures of two minor-groove-binding quinolinium quaternary salts complexed with d(CGCGAATTCGCG)2at 1.6 and 1.8 Å resolution

The structures of the complexes formed between two anticancer minor-groove-binding quinolinium quaternary salts and the dodecamer d(CGCGAATTCGCG)(2) have been refined to resolutions of 1.6 and 1.8 Angstrom. The complexes crystallized in space group P2(1)2(1)2(1) and the structures are isomorphous with previously solved dodecamer structures. The ligands both bind in the central AT region of the minor groove and although the crystallization conditions and structures of the ligands are very similar, they bind in opposing orientations. The structures are compared with two previously published structures of quinolinium quaternary salts, refined at 2.5 Angstrom resolution, complexed with d(CGCGAATTCGCG)(2) and an e(6)G-modified DNA.

Crystallographic Characterization of an Exocyclic DNA Adduct: 3,N4-etheno-2′-deoxycytidine in the Dodecamer 5′-CGCGAATTεCGCG-3′

Exocyclic DNA adducts are formed from metabolites of chemical carcinogens and have also been detected as endogenous lesions in human DNA. The exocyclic adduct 3,N4-etheno-2′-deoxycytidine (εdC), positioned opposite deoxyguanosine in the B-form duplex of the dodecanucleotide d(CGCGAATTεCGCG), has been crystallographically characterized at 1.8Å resolution. This self-complementary oligomer crystallizes in space group P3212, containing a single strand in the asymmetric unit. The crystal structure was solved by isomorphous replacement with the corresponding unmodified dodecamer structure. Exposure of both structures to identical crystal packing forces allows a detailed investigation of the influence of the exocyclic base adduct on the overall helical structure and local geometry. Structural changes are limited to the εC:G and adjacent T:A and G:C base-pairs. The standard Watson–Crick base-pairing scheme, retained in the T:A and G:C base-pairs, is blocked by the etheno bridge in the εC:G pair. In its place, a hydrogen bond involving O2 of εC and N1 of G is present. Comparison with an εdC-containing NMR structure confirms the general conformation reported for εC:G, including the hydrogen bonding features. Superposition with the crystal structure of a DNA duplex containing a T:G wobble pair shows similar structural changes imposed by both mismatches. Evaluation of the hydration shell of the duplex with bond valence calculations reveals two sodium ions in the crystal.

Proteomics analysis of carbon-starved Mycobacterium smegmatis: induction of Dps-like protein.

Mycobacterium tuberculosis is a globally successful pathogen, infecting more than one third of total world's population. These bacteria have the remarkable ability to persist in the host for long periods of time unrecognized by the immune system and then to re-emerge later in life causing the disease. The physiology of such persistent or dormant bacilli is not very well characterized. Some evidence suggests that the dormant bacilli survive in a nutrient-deprived state that is similar to the stationary phase of the bacteria with respect to gene expression and physiology. Under this assumption we have studied the survival of Mycobacterium smegmatis in carbon starvation conditions as a model for mycobacterial persistence. M.smegmatis, being a fast-growing strain, serves as a good model to study starvation responses. Using the two-dimensional electrophoresis-based proteomics approach, we identified a protein which was found to be expressed preferentially under starvation conditions. This protein is homologous to a family of proteins called Dps (DNA binding Protein from Starved cells) that are known to protect DNA under various kinds of environmental stresses and its existence has, so far, not been reported in mycobacteria. Upon expression and purification of this protein, we observed that it has non-specific DNA-binding ability. Formation of a cage-like dodecamer structure is a characteristic feature of Dps. Using comparative modelling we were able to show that Dps from M.smegmatis could form a dodecamer structure similar to the crystal structure of Dps from Escherichia coli.

The B-DNA dodecamer at high resolution reveals a spine of water on sodium.

We describe a very accurate addition (called structure X here) to the B-DNA dodecamer family of X-ray structures. Our results confirm the observation of Drew and Dickerson [(1981) J. Mol. Biol. 151, 535-556] that the spine of hydration in AT tract DNA is two layers deep. However, our results suggest that the primary spine is partially occupied by sodium ions. We suggest that many sequence-dependent features of DNA conformation are mediated by site specific binding of cations. For example, preferential localization of cations, as described here within the minor groove of structure X, is probably the structural origin of AT tract bending and groove narrowing. The secondary spine, which does not interact directly with the DNA, is as geometrically regular as the primary spine, providing a model for transmission of sequence information into solvent regions. A fully hydrated magnesium ion located in the major groove of structure X appears to pull cytosine bases partially out from the helical stack, exposing pi-systems to partial positive charges of the magnesium ion and its outer sphere. A partially ordered spermine molecule is located within the major groove of structure X. Dodecamer structures are derived from crystals of [d(CGCGAATTCGCG)]2 in space group P212121 (a = 25 A, b = 40 A, and c = 66 A). On average, those crystals diffracted to around 2.5 A resolution with 2500 unique reflections. Structure X, with the same space group, DNA sequence, and crystal form as the "Dickerson dodecamer", is refined against a complete, low-temperature, 1.4 A resolution data set, with over 11000 reflections. Structure X appears to be conformationally more ordered than previous structures, suggesting that at least a portion of the conformational heterogeneity previously attributed to DNA sequence in fact arises from experimental error.

Structural effects of the C2-methylhypoxanthine:cytosine base pair in B-DNA: A combined NMR and X-ray diffraction study of d(CGC[m2I]AATTCGCG).

C2-Methylhypoxanthine (m2I) is a synthetic analog of guanine with the N2-amino group replaced by a methyl group. We have studied the structural consequence of the m2I incorporation in DNA by a combination of X-ray crystallographic, NMR, and enzymatic analyses. The crystal structure of d(CGC[m2I]AATTCGCG) has been solved and refined to an R factor of 20.7% at 2.25-A resolution. In the DNA duplex, the two independent m2I:C base pairs maintain the Watson-Crick scheme. While the C2-methyl group of m2I is in van der Waals contact with the O2 of the base-paired cytosine, it only causes the base pair to have slightly higher propeller twist and buckle angles. Its solution structure was analyzed by the NMR refinement procedure SPEDREF [Robinson, H., & Wang, A. H.-J. (1992) Biochemistry 31, 3524-3533] using 2D nuclear Overhauser effect data. Two starting models, a relaxed fiber model and an X-ray model, were subjected to the NOE-constrained refinement using 1518 NOE cross-peak integrals to arrive at the final models with (NOE) R factors of 13.8% and 14.3%, respectively. The RMSD between the two refined models (all atoms included) is 1.23 A, which presently seems to be near the limit of convergence of NOE-based refinement. The local structures of the two models are in better agreement as measured by the RMSD of the dinucleotide steps, falling in the range 0.54-0.98 A. Both refined solution structures confirm that the m2I dodecamer structure is of the B-DNA type with a narrow minor groove at the AT region, as observed in the crystal. However, significant differences exist between the crystal and solution structures in parameters such as pseudorotation angles, propeller twist angles, etc. The solution structure tends to have a more uniform backbone conformation, an observation consistent with that concluded from the laser Raman study of d(CGCAAATTTGCG) [Benevides, J. M., Wang, A. H.-J., van der Marel, G. A., van Boom, J. H., & Thomas, G. J., J. (1988) Biochemistry 27, 931-938]. Three related dodecamers, d(CGCGAATTCGCG), d(CGC[m2I]AATTCGCG), and d(CGC[e6G]AATTCGCG), were tested as substrates for the restriction endonuclease EcoRI. The m2I dodecamer was active, but the e6G dodecamer was not. Our results illustrate the complementarity in terms of the structural information provided by the two methods, X-ray diffraction and NMR.

Structure of the B-DNA decamer C-C-A-A-C-I-T-T-G-G in two different space groups: Conformational flexibility of B-DNA

For the first time, the same B-DNA oligomer has been crystallized and its structure solved in two different space groups. Crystallization of C-C-A-A-C-I-T-T-G-G with Ca2+ yields monoclinic space group C2 with a = 31.87 A, b = 25.69 A, c = 34.21 A, beta = 114.1 degrees, and five base pairs per asymmetric unit. The 5026 2 sigma data to 1.3 A refine to R = 0.152 with 72 waters, one heptavalent hydrated calcium complex, and one cacodylate ion per asymmetric unit. In contrast, crystallization with Mg2+ yields trigonal space group P3(2)21 with a = b = 33.23 A, c = 94.77 A, gamma = 120 degrees, and 10 base pairs per asymmetric unit. The 1725 2 sigma data to 2.2 A refine to R = 0.164 with 36 water molecules and one octahedral magnesium complex per asymmetric unit. The monoclinic form is virtually isostructural with previously solved monoclinic decamers, including twist angles of ca. 50 degrees at C-A and T-G steps. In contrast, the trigonal structure has quite different local helix parameters, with twist angles of ca. 36 degrees at the corresponding steps. These local parameter differences can only be attributed to crystal packing, suggesting that certain sequences of B-DNA are more flexible and influenced by their surroundings than had previously been thought. Such deformability may be important for interaction of B-DNA with control proteins, where both static structure and dynamic deformability comprise components of the recognition process. The crossing of two helices at an angle of 120 degrees in the trigonal cell is a model for an antiparallel, uncrossed Holliday junction, as has been noted earlier by Timsit and Moras [Timsit, Y., & Moras, D. (1991) J. Mol. Biol. 221, 919-940] from a rhombohedral DNA dodecamer structure analysis.

Base-pairing shift in the major groove of (CA)n tracts by B-DNA crystal structures

the crystal packing of the B-DNA dodecamer d(ACCG-GCGCCACA).d(TGTGGCGCCGGT) is characterized by the reciprocal fit of double helices with specific base-backbone interactions in the major groove. Cooling the crystals below -10 degrees C stabilizes a new conformational state with a long-range sequence-dependent one-step shift in the major-groove base pairing. The tilt of the bases leads to the disruption of the Watson-Crick pairing in the major groove and to the formation of interactions with the 5' neighbour of their complement. This alteration propagates along the helical axis over more than half a turn. As a result, the molecular structure is normal when seen from the minor groove side and mismatched in the major groove. Comparison with a parent isomorphous dodecamer structure corresponding to the codon 10-13 of the c-Ha-ras proto-oncogene show that this new structural feature is sequence dependent and clearly favoured by (CA)n tracts. As(CA)n tracts of DNA are involved both in recombination and in transcription, this new recognition pattern should be considered in the analysis of the various processes involving the reading of the genetic information.

Analysis of local helix geometry in three B-DNA decamers and eight dodecamers

Local variations in B-DNA helix structure are compared among three decamers and eight dodecamers, which contain examples of all ten base-pair step types. All pairwise combinations of helix parameters are compared by linear regression analysis, in a search for internal relationships as well as correlations with base sequence. The primary conclusions are: 1. (1) Three-center hydrogen bonds between base-pairs occur frequently in the major groove at C-C, C-A, A-A and A-C steps, but are less convincing at C-C and C-T steps in the minor groove. The requirements for large base-pair propeller are (1) that the base-pair should be A · T rather than G · C, and (2) that it be involved in a major groove three-center hydrogen bond with the following base-pair. Either condition alone is insufficient. Hence, a large propeller is expected at the leading base-pair of A-A and A-C steps, but not at A-T, T-A, C-A or C-C steps. 2. (2) A systematic and quantitative linkage exists between helix variables twist, rise, cup and roll, of such strength that the rise between base-pairs can hardly be described as an independent variable at all. Two typical patterns of behavior are observed at steps from one base-pair to the next: high twist profile (HTP), characterized by high twist, low rise, positive cup and negative roll, and low twist profile (LTP), marked by low twist, high rise, negative cup and positive roll. Examples of HTP are steps G-C, G-A and Y-C-A-R, where Y is pyrimidine and R is purine. Examples of LTP steps are C-G, G-G, A-G and C-A steps other than Y-C-A-R. 3. (3) The minor groove is especially narrow across the two base-pairs of the following steps: A-T, T-A, A-A and G-A. 4. (4) In general, base step geometry cannot be correlated solely with the bases that define the step in question; the two flanking steps also must be taken into account. Hence, local helix structure must be studied in the context, not of two base-pairs: A-B, but of four: x-A-B-y. Calladine's rules, although too simple in detail, were correct in defining the length of sequence over which a given perturbation is expressed. Whereas ten different two-base steps are possible, allowing for the identity of complementary sequences, there are 136 different four-base steps. Only 33 of these 136 four-base steps are represented in the decamer and dodecamer structures solved to date, and hence it is premature to try to set up detailed structural algorithms. 5. (5) The sugar-phosphate backbone chains of B-DNA place strong limits on sequence-induced structural variation, damping down most variables within four or five base-pairs, and preventing purine-purine anti-anti mismatches from causing bulges in the double helix. Hence, although short-range sequence-induced deformations (or deformability) are observed, long-range deformations propagated down the helix are not to be expected.

Local Variability and Base Sequence Effects in DNA Crystal Structures

The importance and usefulness of local doublet parameters in understanding sequence dependent effects has been described for A- and B-DNA oligonucleotide crystal structures. Each of the two sets of local parameters described by us in the NUPARM algorithm, namely the local doublet parameters, calculated with reference to the mean z-axis, and the local helical parameters, calculated with reference to the local helix axis, is sufficient to describe the oligonucleotide structures, with the local helical parameters giving a slightly magnified picture of the variations in the structures. The values of local doublet parameters calculated by NUPARM algorithm are similar to those calculated by NEWHELIX90 program, only if the oligonucleotide fragment is not too distorted. The mean values obtained using all the available data for B-DNA crystals are not significantly different from those obtained when a limited data set is used, consisting only of structures with a data resolution of better than 2.4 A and without any bound drug molecule. Thus the variation observed in the oligonucleotide crystals appears to be independent of the quality of their crystallinity. No strong correlation is seen between any pair of local doublet parameters but the local helical parameters are interrelated by geometric relationships. An interesting feature that emerges from this analysis is that the local rise along the z-axis is highly correlated with the difference in the buckle values of the two basepairs in the doublet, as suggested earlier for the dodecamer structures (Bansal and Bhattacharyya, in Structure & Methods: DNA & RNA, Vol. 3 (Eds., R.H. Sarma and M.H. Sarma), pp. 139-153 (1990)). In fact the local rise values become almost constant for both A- and B-forms, if a correction is applied for the buckling of the basepairs. In B-DNA the AA, AT, TA and GA basepair sequences generally have a smaller local rise (3.25 A) compared to the other sequences (3.4 A) and this seems to be an intrinsic feature of basepair stacking interaction and not related to any other local doublet parameter. The roll angles in B-DNA oligonucleotides have small values (less than +/- 8 degrees), while mean local twist varies from 24 degrees to 45 degrees. The CA/TG doublet sequences show two types of preferred geometries, one with positive roll, small positive slide and reduced twist and another with negative roll, large positive slide and increased twist.(ABSTRACT TRUNCATED AT 400 WORDS)

The propeller DNA conformation of poly(dA).poly(dT).

Physical properties of the DNA duplex, poly(dA).poly(dT) differ considerably from the alternating copolymer poly(dAT). A number of molecular models have been used to describe these structures obtained from fiber X-ray diffraction data. The recent solutions of single crystal DNA dodecamer structures with segments of oligo-A.oligo-T have revealed the presence of a high propeller twist in the AT regions which is stabilized by the formation of bifurcated (three-center) hydrogen bonds on the floor of the major groove, involving the N6 amino group of adenine hydrogen bonding to two O4 atoms of adjacent thymine residues on the opposite strand. Here we show that it is possible to incorporate the features of the single crystal analysis, specifically high propeller twist, bifurcated hydrogen bonds, and a narrow minor groove, as well as the close interstrand NMR signal between adenine HC2 and ribose HC1' of the opposite strand, into a model that is fully compatible with the diffraction data obtained from poly(dA).poly(dT).