Disulfide Unit Research Articles

Impacts of Disulfide‐Containing Monomers in Alternating Diene Metathesis Polymerization

ABSTRACTAmong the classes of synthetic polymers, disulfide‐containing structures offer unique opportunities due to their accessibility to redox chemistry that allows for degradation or reversible disulfide formation and exchange under mild conditions. Here, we examine the role of disulfides in olefin metathesis polymerization, specifically alternating diene metathesis (ALTMET) polymerization, for synthesizing unsaturated polyolefins with embedded disulfides. Our synthetic strategy hinged on the use of α,ω‐diacrylate monomers, including those connected by a disulfide unit, via copolymerization by the ALTMET mechanism to yield copolymers containing a range of disulfide content. In addition, the potential impacts of sulfur‐ruthenium interactions on the ALTMET process were investigated spectroscopically, while the degradation of the resultant polymers was affected by mild reducing agents. Overall, this study contributes to the development of degradable synthetic polymers using olefin metathesis methods, with an increased understanding of the potential for further use of disulfide groups in such metathesis reactions.

Trivalent Disulfide Unit-Masked System Efficiently Delivers Large Oligonucleotide.

Oligonucleotide drugs are shining in clinical therapeutics, but efficient and safe delivery systems severely limit their widespread use. A disulfide unit technology platform based on dynamic thiol exchange chemistry at the cell membrane has the potential for drug delivery. However, the alteration of the disulfide unit CSSC dihedral angle induced by different substituents directly affects the effectiveness of this technology and its stability. Previously, we constructed a trivalent low dihedral angle disulfide unit that can effectively promote the cellular uptake of small molecules. Here, we constructed a novel disulfide unit-masked oligonucleotide hybrid based on a low dihedral angle disulfide unit, motivated by prodrug design. Cellular imaging results showed that such a system exhibited superior cellular delivery efficiency than the commercial Lipo2000 without cytotoxicity. The thiol reagents significantly reduced its cellular uptake (57-74%), which proved to be endocytosis-independent. In addition, in vivo distribution experiments in mice showed that such systems can be rapidly distributed in liver tissues with a duration of action of more than 24 h, representing a potential means of silencing genes involved in the pathogenesis of liver-like diseases. In conclusion, this trivalent disulfide unit-masked system we constructed can effectively deliver large oligonucleotide drugs.

Intracellular Delivery of Antisense Oligonucleotides by Tri-Branched Cyclic Disulfide Units.

Therapeutic oligonucleotides, such as antisense DNA, show promise in treating previously untreatable diseases. However, their applications are still hindered by the poor membrane permeability of naked oligonucleotides. Therefore, it is necessary to develop efficient methods for intracellular oligonucleotide delivery. Previously, our group successfully developed disulfide-based Membrane Permeable Oligonucleotides (MPON), which achieved enhanced cellular uptake and gene silencing effects through an endocytosis-free uptake mechanism. Herein, we report a new molecular design for the next generation of MPON, called trimer MPON. The trimer MPON consists of a tri-branched backbone, three α-lipoic acid units, and a spacer linker between the oligonucleotides and tri-branched cyclic disulfide unit. We describe the design, synthesis, and functional evaluation of the trimer MPON, offering new insights into the molecular design for efficient oligonucleotide delivery.

Trigonometric Bundling Disulfide Unit Starship Synergizes More Effectively to Promote Cellular Uptake.

A small molecule disulfide unit technology platform based on dynamic thiol exchange chemistry at the cell membrane has the potential for drug delivery. However, the alteration of the CSSC dihedral angle of the disulfide unit caused by diverse substituents directly affects the effectiveness of this technology platform as well as its own chemical stability. The highly stable open-loop relaxed type disulfide unit plays a limited role in drug delivery due to its low dihedral angle. Here, we have built a novel disulfide unit starship based on the 3,4,5-trihydroxyphenyl skeleton through trigonometric bundling. The intracellular delivery results showed that the trigonometric bundling of the disulfide unit starship effectively promoted cellular uptake without any toxicity, which is far more than 100 times more active than that of equipment with a single disulfide unit in particular. Then, the significant reduction in cell uptake capacity (73-93%) using thiol erasers proves that the trigonometric bundling of the disulfide starship is an endocytosis-independent internalization mechanism via a dynamic covalent disulfide exchange mediated by thiols on the cell surface. Furthermore, analysis of the molecular dynamics simulations demonstrated that trigonometric bundling of the disulfide starship can significantly change the membrane curvature while pushing lipid molecules in multiple directions, resulting in a significant distortion in the membrane structure and excellent membrane permeation performance. In conclusion, the starship system we built fully compensates for the inefficiency deficiencies induced by poor dihedral angles.

PH-Induced conversion of bolaamphiphilic vesicles to reduction-responsive nanogels for enhanced Nile Red and Rose Bengal delivery

This study details the preparation and investigation of molecular nanogels formed by the self-assembly of bolaamphiphilic dipeptide derivatives containing a reduction-sensitive disulfide unit. The described bolaamphiphiles, featuring amino acid terminal groups, generate cationic vesicles at pH 4, which evolve into gel-like nanoparticles at pH 7. The critical aggregation concentration has been determined, and the nanogels' size and morphology have been characterized through Dynamic Light Scattering (DLS) and Transmission Electron Microscopy (TEM). Circular Dichroism (CD) spectroscopy reveals substantial molecular reconfigurations accompanying the pH shift. These nanogels enhance the in vitro cellular uptake of the lipophilic dye Nile Red and the ionic photosensitizer Rose Bengal into Human colon adenocarcinoma (HT-29) cells, eliminating the need for organic co-solvents in the former case. Fluorescence measurements with Nile Red as a probe indicate the reduction-sensitive disassembly of the nanogels. In photodynamic therapy (PDT) applications, Rose Bengal-loaded nanogels demonstrate notable improvements, with flow cytometry analysis evidencing increased apoptotic activity in the study with HT-29 cells.

Bifurcation of Excited-State Population Leads to Anti-Kasha Luminescence in a Disulfide-Decorated Organometallic Rhenium Photosensitizer.

We report a rhenium diimine photosensitizer equipped with a peripheral disulfide unit on one of the bipyridine ligands, [Re(CO)3(bpy)(S-Sbpy4,4)]+ (1+, bpy = 2,2'-bipyridine, S-Sbpy4,4 = [1,2]dithiino[3,4-c:6,5-c']dipyridine), showing anti-Kasha luminescence. Steady-state and ultrafast time-resolved spectroscopies complemented by nonadiabatic dynamics simulations are used to disclose its excited-state dynamics. The calculations show that after intersystem crossing the complex evolves to two different triplet minima: a (S-Sbpy4,4)-ligand-centered excited state (3LC) lying at lower energy and a metal-to-(bpy)-ligand charge transfer (3MLCT) state at higher energy, with relative yields of 90% and 10%, respectively. The 3LC state involves local excitation of the disulfide group into the antibonding σ* orbital, leading to significant elongation of the S-S bond. Intriguingly, it is the higher-lying 3MLCT state, which is assigned to display luminescence with a lifetime of 270 ns: a signature of anti-Kasha behavior. This assignment is consistent with an energy barrier ≥ 0.6 eV or negligible electronic coupling, preventing reaction toward the 3LC state after the population is trapped in the 3MLCT state. This study represents a striking example on how elusive excited-state dynamics of transition-metal photosensitizers can be deciphered by synergistic experiments and state-of-the-art calculations. Disulfide functionalization lays the foundation of a new design strategy toward harnessing excess energy in a system for possible bimolecular electron or energy transfer reactivity.

CytoDirect: A Nucleic Acid Nanodevice for Specific and Efficient Delivery of Functional Payloads to the Cytoplasm.

Direct and efficient delivery of functional payloads such as chemotherapy drugs, siRNA, or small-molecule inhibitors into the cytoplasm, bypassing the endo/lysosomal trapping, is a challenging task for intracellular medicine. Here, we take advantage of the programmability of DNA nanotechnology to develop a DNA nanodevice called CytoDirect, which incorporates disulfide units and human epidermal growth factor receptor 2 (HER2) affibodies into a DNA origami nanostructure, enabling rapid cytosolic uptake into targeted cancer cells and deep tissue penetration. We further demonstrated that therapeutic oligonucleotides and small-molecule chemotherapy drugs can be easily delivered by CytoDirect and showed notable effects on gene knockdown and cell apoptosis, respectively. This study demonstrates the synergistic effect of disulfide and HER2 affibody modifications on the rapid cytosolic delivery of DNA origami and its payloads to targeted cells and deep tissues, thereby expanding the delivery capabilities of DNA nanostructures in a new direction for disease treatment.

Automated Solid‐Phase Oligo(disulfide) Synthesis

AbstractA method for automated solid‐phase synthesis of oligo(disulfide)s was developed. It is based on a synthetic cycle comprising removal of a protecting group from a resin‐bound thiol followed by treatment with monomers containing a thiosulfonate as an activated precursor. For ease of purification and characterization, the disulfide oligomers were synthesized as extensions of oligonucleotides on an automated oligonucleotide synthesizer. Six different dithiol monomer building blocks were synthesized. Sequence‐defined oligomers of up to seven disulfide units were synthesized and purified. The sequence of the oligomer was confirmed by tandem MS/MS analysis. One of the monomers contains a coumarin cargo that can be released by a thiol‐mediated release mechanism. When the monomer was incorporated into an oligo(disulfide) and subjected to reducing conditions, the cargo was released under near‐physiological conditions, which underlines the potential use of these molecules in drug delivery systems.

Automated Solid-Phase Oligo(disulfide) Synthesis.

A method for automated solid-phase synthesis of oligo(disulfide)s was developed. It is based on a synthetic cycle comprising removal of a protecting group from a resin-bound thiol followed by treatment with monomers containing a thiosulfonate as an activated precursor. For ease of purification and characterization, the disulfide oligomers were synthesized as extensions of oligonucleotides on an automated oligonucleotide synthesizer. Six different dithiol monomer building blocks were synthesized. Sequence-defined oligomers of up to seven disulfide units were synthesized and purified. The sequence of the oligomer was confirmed by tandem MS/MS analysis. One of the monomers contains a coumarin cargo that can be released by a thiol-mediated release mechanism. When the monomer was incorporated into an oligo(disulfide) and subjected to reducing conditions, the cargo was released under near-physiological conditions, which underlines the potential use of these molecules in drug delivery systems.

Nanoaggregates of Disulfide-Decorated TrxR Inhibitor Promote Cellular Uptake, Selective Targeting, and Antitumor Efficacy.

Three self-assembled nanoaggregates (CPUL1-LA NAs, CPUL1-DA NAs, and CPUL1-AA NAs) were constructed through lipoic acid (LA), dithiodipropionic acid (DA), and adipic acid (AA) decorated TrxR inhibitor (CPUL1), respectively. Measurements of DLS, TEM, UV-vis, fluorescence, 1H NMR, ITC, and MTT assays verified disulfide-containing CPUL1-LA NAs and CPUL1-DA NAs spontaneously assembled carrier-free nanoparticles in aqueous solution, which possessed high drug contents, excellent stability, improved cytotoxicity against HUH7 hepatoma cells, and potential biosafety because of low cytotoxicity against L02 normal cells. In contrast, disulfide-free CPUL1-AA NAs happened to aggregate and precipitate after 48 h, which showed distinct instability in aqueous solution. Thus, disulfide units seemed to be crucial for constructing controllable and stable nanoaggregates. While measuring the reduction of nanoaggregates by TrxR/NADPH and GSH/GR/NADPH, cyclic disulfide of LA and linear disulfide of DA were verified to endow the nanoaggregates with targeting ability to respond specifically to TrxR over GSH. Furthermore, by tests of flow cytometry, fluorescence images, and CLSM, both CPUL1-LA NAs and CPUL1-DA NAs displayed a faster cellular uptake characteristic to be internalized by cancer cells and could generate more abundant ROS to induce cell apoptosis than that of free CPUL1, resulting in significantly improved antitumor efficacy against HUH7 cells in vitro.

Thiol‐ene emulsion step polymerization in a photochemical stirred tank reactor: Molecular weight, cyclization, and fragmentation

AbstractUnlike many step polymerizations, the polymerization of bifunctional thiol and alkene monomers can be carried in emulsion to prepare a range of sulfur‐containing polymer particles differing markedly from conventional emulsion chain polymers. This study examines how the change of polymerization mechanism affects polymer molecular weight, structure and composition. A 2,2′‐dimercaptodiethyl sulfide/diallyl phthalate emulsion is photopolymerized in a photochemical stirred‐tank reactor equipped with Light‐emitting diodes (LEDs) to yield a 30% solids content latex with a high weight‐average molecular weight (100 kDa) and a broad molecular weight distribution (Đ = 8.5). Intramolecular cyclization occurs during polymerization by the addition of a thiyl radical to the unsaturated end group of the same molecule. Irreversible ring‐closure takes place to produce “dead” cyclic oligomers in the early stage of the reaction, whereas chain‐growth continues at high conversion. Consequently, the particles are composed of high molecular weight linear chains and a fraction of stable oligomer cycles, showing a broad and bimodal molecular weight distribution. The linear poly(thioether) chains include occasionally disulfide units due to thiyl radical recombination. The reversibility of disulfide bonds causes a decrease of molecular weight during storage. The addition of radical inhibitor to the latex stops fragmentation of SS bonds.

Luminescent Iridium Complexes with a Sulfurated Bipyridine Ligand: PCET Thermochemistry of the Disulfide Unit and Photophysical Properties.

Molecular systems combining light harvesting and charge storage are receiving great attention in the context of, for example, artificial photosynthesis and solar fuel generation. As part of ongoing efforts to develop new concepts for photoinduced proton-coupled electron transfer (PCET) reactivities, we report a cyclometallated iridium(III) complex [Ir(ppy)2(S-Sbpy)](PF6) ([1]PF6) equipped with our previously developed sulfurated bipyridine ligand S-Sbpy. A new one-step synthetic protocol for S-Sbpy is developed, starting from commercially available 2,2'-bipyridine, which significantly facilitates the use of this ligand. [1]+ features a two-electron reduction with potential inversion (|E1| > |E2|) at moderate potentials (E1 = -1.12, E2 = -1.11 V versus. Fc+/0 at 253 K), leading to a dithiolate species [1]-. Protonation with weak acids allows for determination of pKa = 23.5 in MeCN for the S-H···S- unit of [1H]. The driving forces for both the H atom and the hydride transfer are calculated to be ∼60 kcal mol-1 and verified experimentally by reaction with a suitable H atom and a hydride acceptor, demonstrating the ability of [1]+ to serve as a versatile PCET reagent, albeit with limited thermal stability. In MeCN solution, an orange emission for [1]PF6 from a triplet-excited state was found. Density functional calculations and ultrafast absorption spectroscopy are used to give insight into the excited-state dynamics of the complex and suggest a significantly stretched S-S bond for the lowest triplet-state T1. The structural responsiveness of the disulfide unit is proposed to open an effective relaxation channel toward the ground state, explaining the unexpectedly short lifetime of [1]+. These insights as well as the quantitative ground-state thermochemistry data provide valuable information for the use of S-Sbpy-functionalized complexes and their disulfide-/dithiol-directed PCET reactivity.

Correlation between the NMR Chemical Shifts and Thiolate Protonation Constants of Cysteamine, Homocysteine, and Penicillamine

1H and 13C NMR measurements were carried out to explore anticipated correlations between chemical shifts versus thiolate basicities and redox potentials of cysteamine, homocysteine, penicillamine, and their homodisulfides. All correlations were analyzed and statistically evaluated. The closest correlation was observed for the αCH nuclei concerning 1H and 13C NMR data. Since neither site-specific basicities nor site-specific redox potentials can be directly measured by any means in peptides and proteins containing several thiol and/or disulfide units, these data provide a simple method and predictive power to estimate the aforementioned site-specific physicochemical parameters for analogous sulfur-containing moieties in related biopolymers.

Anion Redox in an Amorphous Titanium Polysulfide.

Amorphous transition-metal polysulfides are promising positive electrode materials for next-generation rechargeable lithium-ion batteries because of their high theoretical capacities. In this study, sulfur anion redox during lithiation of amorphous TiS4 (a-TiS4) was investigated by using experimental and theoretical methods. It was found that a-TiS4 has a variety of sulfur valence states such as S2-, S-, and Sδ-. The S2- species became the main component in the Li4TiS4 composition, indicating that sulfur is a redox-active element up to this composition. The simulated a-TiS4 structure changed gradually by lithium accommodation to form a-Li4TiS4: S-S bonds in the disulfide units and polysulfide chains were broken. Bader charge analysis suggested that the average S valency decreased drastically. Moreover, deep lithiation of a-TiS4 provided a conversion reaction to metallic Ti and Li2S, with a high practical capacity of ∼1000 mAh g-1 when a lower cutoff voltage was applied.

Abstract 303: Thiol-mediated rapid cytosolic uptake of tumor-targeted DNA nanorobot for siRNA delivery

Abstract Most FDA approved anticancer drugs rely on passive delivery for cellular uptake, which will compromise therapeutic efficacy and lead to off-target-associated toxicity. DNA nanostructures are promising drug delivery platforms for targeted cancer therapy due to their highly programmable molecular interactions, precisely defined geometry, stoichiometry, as well as outstanding biocompatibility. However, most DNA nanostructures are taken up by cells through endocytosis pathway, resulting in the subsequent endo- and lysosomal trapping and degradation. Here we design a smart DNA nanorobot that will go through endocytosis-independent pathway with tumor target specificity and therapeutic effects for the treatment of breast cancer. It has been reported that disulfide units are able to mediate cytosolic uptake of DNA and RNA molecules by disulfide exchange reactions with thiol groups on the cell membrane protein. Therefore, we site-specifically modify disulfide units onto the inside surface of DNA nanorobot. 24-helix DNA origami nanotube is used as drug delivery vehicle. To achieve target specificity, we use HER2 affibody, a short peptide that has high binding affinity [KD=22pM] to HER2 protein that overexpressed on the cell membrane of breast cancer cells, and truncated HER2 protein as a temporary lock-and-key to close DNA nanorobot. In this way, DNA nanorobot can only be opened when it reaches tumor cells that overexpress HER2 protein which has a higher binding affinity to HER2 affibody. The inner disulfide units will be exposed to mediate cytosolic uptake of DNA nanorobot. To achieve potent therapeutic effect, we use therapeutic siRNAs/shRNAs as drugs due to their efficient target gene silencing, splice modulation and gene activation potentials. Cytosolic uptake of siRNAs/shRNAs by DNA nanorobot could maximize their target knockdown effect since siRNAs/shRNAs silencing occurs primarily in the cytoplasm. We use atomic force microscope (AFM), transmission electron microscope (TEM), agarose gel electrophoresis and fluorimeter to characterize the formation of the DNA nanorobot. The cellular uptake of DNA nanorobot is evaluated by confocal laser scanning microscope (CLSM) and flow cytometry. Use RT-qPCR and western blot to test the gene and protein knockdown effect. In the future, we will do in vivo experiment on tumor xenograft mice and assess the antitumor effect of DNA nanorobot. Our current results demonstrated that DNA origami modified with disulfide units can directly get internalized into the cytoplasm of cells. In addition, protecting disulfide units inside the DNA origami nanotube can block the cytosolic uptake. Therefore, our DNA nanorobot has the potential to be an efficient and safe drug delivery platform for cancer therapeutics. Citation Format: Lu Yu. Thiol-mediated rapid cytosolic uptake of tumor-targeted DNA nanorobot for siRNA delivery [abstract]. In: Proceedings of the American Association for Cancer Research Annual Meeting 2022; 2022 Apr 8-13. Philadelphia (PA): AACR; Cancer Res 2022;82(12_Suppl):Abstract nr 303.

Redox-Responsive Hydrogels for Tunable and "On-Demand" Release of Biomacromolecules.

In recent years, stimuli-responsive degradation has emerged as a desirable design criterion for functional hydrogels to tune the release of encapsulated payload as well as ensure degradation of the gel upon completion of its function. Herein, redox-responsive hydrogels with a well-defined network structure were obtained using a highly efficient thiol-disulfide exchange reaction. In particular, gelation occurred upon combining thiol-terminated tetra-arm polyethylene glycol (PEG) polymers with linear telechelic PEG-based polymers containing pyridyl disulfide units at their chain ends. Rapid gelation proceeds with good conversions (>85%) to yield macroporous hydrogels possessing high water uptake. Furthermore, due to the presence of the disulfide linkages, the thus-obtained hydrogels can self-heal. The obtained hydrogels undergo complete degradation when exposed to environments rich in thiol-containing agents such as dithiothreitol (DTT) and L-glutathione (GSH). Also, the release profile of encapsulated protein, namely, bovine serum albumin, can be tuned by varying the molecular weight of the polymeric precursors. Additionally, it was demonstrated that complete dissolution of the hydrogel to rapidly release the encapsulated protein occurs upon treating these hydrogels with DTT. Cytotoxicity evaluation of the hydrogels and their degradation products indicated the benign nature of these hydrogels. Additionally, the cytocompatible nature of these materials was also evident from a live/dead cell viability assay. One can envision that the facile fabrication and their ability to degrade on-demand and release their payload will make these benign polymeric scaffolds attractive for various biomedical applications.

Hysteresis Nanoarchitectonics with Chiral Gel Fibers and Achiral Gold Nanospheres for Reversible Chiral Inversion.

Intelligent control over the handedness of circular dichroism (CD) is of special significance in self-organized biological and artificial systems. Herein, we report a chiral organic molecule (R1) containing a disulfide unit self-assembles into M-type helical fibers gels, which undergoes chirality inversion by incorporating gold nanospheres due to the formation of Au-S bonds between R1 and gold nanospheres. Upon heating at 80 °C, the aggregation of gold nanospheres results in a disappearance of the Au-S bond, allowing the reversible switching back to M-type helical fibers. The original chirality of M-type fibers could also be retained by adding anisotropic gold nanorods. A series of characterization methods, involving CD, Raman, Infrared spectroscopy, electric microscopy, and small-angle X-ray scattering (SAXS) measurements were used to investigate the mechanism of chiral evolutions. Our results provide a facile way of fabricating hysteresis nanoarchitectonics to achieve dynamic supramolecular chirality using inorganic metallic nanoparticles.

Polybutadiene Vitrimers with Tunable Epoxy Ratios: Preparation and Properties.

Traditional crosslinked diene rubber has excellent thermal–mechanical properties and solvent resistance, yet it is incapable of being recycled via universal molding or injecting. Vitrimers, a new class of covalently crosslinked polymer networks, can be topologically rearranged with the associative exchange mechanism, endowing them with thermoplasticity. Introducing the concept of vitrimers into crosslinked networks for the recycling of rubbers is currently an attractive research topic. However, designing tailored rubber vitrimers still remains a challenge. Herein, polybutadiene (PB) vitrimers with different structures were prepared via partial epoxidation of double bonds and ring-opening esterification reactions. Their mechanical and relaxation properties were investigated. It was found that the increasing crosslinking density can increase tensile strength and activation energy for altering the network topology. The influence of side-group effects on their relaxation properties shows that an increase in the number of epoxy groups on the polybutadiene chain can increase the chance of an effective exchange of disulfide units. This work provides a simple network design which can tune vitrimer properties via altering the crosslinking density and side-group effects.

Antisense Oligonucleotide Modified with Disulfide Units Induces Efficient Exon Skipping in mdx Myotubes through Enhanced Membrane Permeability and Nucleus Internalization.

We have found that antisense oligonucleotides and siRNA molecules modified with repeat structures of disulfide units can be directly introduced into the cytoplasm and exhibit a suppressive effect on gene expression. In this study, we analyzed the mechanism of cellular uptake of these membrane-permeable oligonucleotides (MPONs). Time-course analysis by confocal microscopy showed that the uptake of MPONs from the plasma membrane to the cytoplasm reached 50 % of the total uptake in about 5 min. In addition, analysis of the plasma membrane proteins to which MPONs bind, identified several proteins, including voltage-dependent anion channel. Next, we analyzed the behavior of MPONs in the cell and found them to be abundant in the nucleus as early as 24 h after addition with the amount increasing further after 48 and 72 h. The amount of MPONs was 2.5-fold higher than that of unmodified oligonucleotides in the nucleus after 72 h. We also designed antisense oligonucleotides and evaluated the effect of MPONs on mRNA exon skipping using DMD model cells; MPONs caused exon skipping with 69 % efficiency after 72 h, which was three times higher than the rate of the control. In summary, the high capacity for intracytoplasmic and nuclear translocation of MPONs is expected to be useful for therapeutic strategies targeting exon skipping.

Light-Mediated Synthesis and Reprocessing of Dynamic Bottlebrush Elastomers under Ambient Conditions.

We introduce a novel grafting-through polymerization strategy to synthesize dynamic bottlebrush polymers and elastomers in one step using light to construct a disulfide-containing backbone. The key starting material-α-lipoic acid (LA)-is commercially available, inexpensive, and biocompatible. When installed on the chain end(s) of poly(dimethylsiloxane) (PDMS), the cyclic disulfide unit derived from LA polymerizes under ultraviolet (UV) light in ambient conditions. Significantly, no additives such as initiator, solvent, or catalyst are required for efficient gelation. Formulations that include bis-LA-functionalized cross-linker yield bottlebrush elastomers with high gel fractions (83-98%) and tunable, supersoft shear moduli in the ∼20-200 kPa range. An added advantage of these materials is the dynamic disulfide bonds along each bottlebrush backbone, which allow for light-mediated self-healing and on-demand chemical degradation. These results highlight the potential of simple and scalable synthetic routes to generate unique bottlebrush polymers and elastomers based on PDMS.