Assignment Of Disulfide Bonds Research Articles

Research Progress on Disulfide Bond Assignment Analysis Based on Mass Spectrometry

Research Progress on Disulfide Bond Assignment Analysis Based on Mass Spectrometry

Conformational μ-Conotoxin PIIIA Isomers Revisited: Impact of Cysteine Pairing on Disulfide-Bond Assignment and Structure Elucidation.

Peptides and proteins carrying high numbers of cysteines can adopt various 3D structures depending on their disulfide connectivities. The unambiguous verification of such conformational isomers with more than two disulfide bonds is extremely challenging, and experimental strategies for their unequivocal structural analysis are largely lacking. We synthesized all 15 possible isomers of the 22mer conopeptide μ-PIIIA and applied 2D NMR spectroscopy and MS/MS for the elucidation of its structure. This study provides intriguing insights in how the disulfide connectivity alters the global fold of a toxin. We also show that analysis procedures involving comprehensive combinations of conventional methods are required for the unambiguous assignment of disulfides in cysteine-rich peptides and proteins and that standard compounds are crucially needed for the structural analysis of such complex molecules.

Nuclear Magnetic Resonance Spectroscopy in Analysis of Granulin Three-Dimensional Structure and Cysteine Bridging.

Granulin (GRN) structural motif represents a ladderlike stack of β-hairpins reinforced with six parallel disulfide bridges. When GRNs are produced in a recombinant protein expression host (e.g., in bacteria) or via chemical synthesis, the formation of disulfide bridges from thiols undergoing uncontrolled oxidation may be random. As a consequence, the resulting protein could be a mixture of a large number of disulfide species. Incorrectly folded GRNs may behave abnormally in bioassays; therefore isolation and identification of properly structured, chemically homogenous GRN peptides is very important for biological relevance of the GRN effects observed in the tests. Protein nuclear magnetic resonance (NMR) spectroscopy is an excellent tool for identification and characterization of well-structured GRN disulfide species produced in an Escherichia coli expression system. At first, GRN disulfide species are crudely separated by reversed-phase HPLC chromatography. Obtained fractions are screened by 1D (one-dimensional) proton NMR for the presence of well-folded GRN species. The well-folded GRNs are 15N-labeled and purified, and NMR is used to determine their three-dimensional structure and assign disulfide pairing patterns. Additionally, NMR characterization of model peptides derived from the GRN amino acid sequences can help resolve ambiguities in disulfide bond assignment. This approach was first successfully used to obtain biologically active human GRNs, but it can be easily expanded to GRN peptides from other species and/or generated by other methods.

Recent mass spectrometry-based techniques and considerations for disulfide bond characterization in proteins.

Disulfide bonds are important structural moieties of proteins: they ensure proper folding, provide stability, and ensure proper function. With the increasing use of proteins for biotherapeutics, particularly monoclonal antibodies, which are highly disulfide bonded, it is now important to confirm the correct disulfide bond connectivity and to verify the presence, or absence, of disulfide bond variants in the protein therapeutics. These studies help to ensure safety and efficacy. Hence, disulfide bonds are among the critical quality attributes of proteins that have to be monitored closely during the development of biotherapeutics. However, disulfide bond analysis is challenging because of the complexity of the biomolecules. Mass spectrometry (MS) has been the go-to analytical tool for the characterization of such complex biomolecules, and several methods have been reported to meet the challenging task of mapping disulfide bonds in proteins. In this review, we describe the relevant, recent MS-based techniques and provide important considerations needed for efficient disulfide bond analysis in proteins. The review focuses on methods for proper sample preparation, fragmentation techniques for disulfide bondanalysis, recent disulfide bond mapping methods based on the fragmentation techniques, and automated algorithms designed for rapid analysis of disulfide bonds from liquid chromatography-MS/MS data. Researchers involved in method development for protein characterization can use the information herein to facilitate development of new MS-based methods for protein disulfide bond analysis. In addition, individuals characterizing biotherapeutics, especially by disulfide bond mapping in antibodies, can use this review to choose the best strategies for disulfide bond assignment of their biologic products. Graphical Abstract This review, describing characterization methods for disulfide bonds in proteins, focuses on three critical components: sample preparation, mass spectrometry data, and software tools.

Complete Mapping of Complex Disulfide Patterns with Closely-Spaced Cysteines by In-Source Reduction and Data-Dependent Mass Spectrometry.

Mapping of disulfide bonds is an essential part of protein characterization to ensure correct cysteine pairings. For this, mass spectrometry (MS) is the most widely used technique due to fast and accurate characterization. However, MS-based disulfide mapping is challenged when multiple disulfide bonds are present in complicated patterns. This includes the presence of disulfide bonds in nested patterns and closely spaced cysteines. Unambiguous mapping of such disulfide bonds typically requires advanced MS approaches. In this study, we exploited in-source reduction (ISR) of disulfide bonds during the electrospray ionization process to facilitate disulfide bond assignments. We successfully developed a LC-ISR-MS/MS methodology to use as an online and fully automated partial reduction procedure. Postcolumn partial reduction by ISR provided fast and easy identification of peptides involved in disulfide bonding from nonreduced proteolytic digests, due to the concurrent detection of disulfide-containing peptide species and their composing free peptides. Most importantly, intermediate partially reduced species containing only a single disulfide bond were also generated, from which unambiguous assignment of individual disulfide bonds could be done in species containing closely spaced disulfide bonds. The strength of this methodology was demonstrated by complete mapping of all four disulfide bonds in lysozyme and all 17 disulfide bonds in human serum albumin, including nested disulfide bonds and motifs of adjacent cysteine residues.

Determination of disulfide linkages in antimicrobial peptides of the macin family by combination of top-down and bottom-up proteomics.

Beside the high biological significance which is based on the inherent dependence of biological activity on the structural features of antimicrobial peptides (which holds true for entirely every protein), the presented analytical strategy will be of wide interest, as it widens the available toolbox for the analysis of this important posttranslational modification.

Disulfide bond assignment of an IgG1 monoclonal antibody by LC–MS with post-column partial reduction

Confirmation of the correct disulfide linkage and demonstration of the lack of a significant level of scrambled disulfide bonds are critical to ensure the appropriate folding and structure of recombinant monoclonal antibodies. Currently these are typically achieved by carrying out multiple experiments, most commonly via the comparison of the samples before and after reduction by LC–MS and MS/MS. The data are then analyzed by searching across all the possible disulfide linkages manually or with the aid of computer algorithms. To eliminate the need of multiple experiments and complicated data analysis, a simple LC–MS-based method coupled with post-column partial reduction was developed. Using a recombinant monoclonal IgG1 antibody as an example, this method demonstrates the ability to confirm the correct disulfide linkage and the ability to detect scrambled disulfide bonds from a single experiment with a simple data analysis strategy.

Automatic Disulfide Bond Assignment Using a1Ion Screening by Mass Spectrometry for Structural Characterization of Protein Pharmaceuticals

An automatic method for disulfide bond assignment using dimethyl labeling and computational screening of a(1) ions with customized software, RADAR, is developed. By utilization of the enhanced a(1) ions generated from labeled peptides, the N-terminal amino acids from disulfide-linked peptides can be determined. In this study, we applied this method for structural characterization of recombinant monoclonal antibodies, an important group of therapeutic proteins. In addition to a(1) ion screening and molecular weight match, new RADAR is capable of confirming the matched peptide pairs by further comparing the collision-induced dissociation (CID) fragment ions. With the N-terminal amino acid identities as a threshold, the identification of disulfide-linked peptide pairs can be achieved rapidly at a higher confidence level. Unlike most current approaches, prior knowledge of disulfide linkages or a high-end mass spectrometer is not required, and tedious work or deliberate interpretation can be avoided in this study. Our approach makes it possible to analyze unknown disulfide bonds of protein pharmaceuticals as well as their degraded forms without further protein separation. It can be used as a convenient quality examination tool during biopharmaceutical development and manufacturing processes.

Gas-Phase Scrambling of Disulfide Bonds during Matrix-Assisted Laser Desorption/Ionization Mass Spectrometry Analysis

Evidence for photo-induced radical disulfide bond scrambling in the gas phase during matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) is described. The phenomenon was observed during the analysis of tryptic peptides from insulin and was confirmed in the determination of disulfide bonds in the rhamnose-binding lectin SEL24K from the Chinook salmon Oncorhynchus tshawytscha. A possible mechanism for this surprising scrambling is proposed. Despite this finding, the disulfide bond pattern in SEL24K was assigned unambiguously by a multi-enzyme digestion strategy in combination with MALDI mass spectrometry. The pattern was found to be symmetrical in the tandem repeat sequence of SEL24K. To the best of our knowledge, this is the first report of disulfide bond scrambling in the gas phase during MALDI-MS analysis. This observation has important ramifications for unambiguous assignment of disulfide bonds.

Recombinant human J-chain: Fix the protein aggregations and yield maximize

Polymeric immunoglobulin (dimeric IgA and pentameric IgM) molecules can assembly by using the immunoglobulin J (joining) chain and across the epithelial cell layers. Based on its amino acid and gene sequences data, disulfide bond (2 bonds) assignment secondary structure predictions, and chemical properties, a model for J-chain folding has been proposed. However, the crystal structure of the J-chain protein is still far from obtained, because the J-chain expression and its protein downstream has a permanent aggregation problems, due to its two free thiol groups. Our work focused on the chemical blocking of free cysteines-SH or to mutate these cysteines into serine residues. The chemical blocking yielded partially soluble proteins with new structures (carboxyamidomethyl cysteine and carboxyamidomethyl methionine) at cysteine and methionine residues. While mutate the cysteines into serine has been yielded a complete soluble (11.5 mg/l) J-chain protein which migrate (SDS-PAGE) at 27 KDa. We were used pET22b expression vector and E. coli BL21 (DE3) to produce the J-chain protein. For maximization the production yield of j-chain foreign protein, the batch culture was developed. We described the scaling-up production in term of kinetic behavior to the recombinant E.coli and optimization of cultivation parameters in 3-L bench-top bioreactor. The process was automated through a computer aided data bioprocessing system AFS-BioCommand multi-process management program to regulate the cell growth rate, temperature, pH and agitation speed based on dissolved oxygen. The results showed an obvious increasing in biomass by 5.98 g/L after about 27 h [corrected]

Structural Conservation of Mouse and Rat Zona Pellucida Glycoproteins. Probing the Native Rat Zona Pellucida Proteome by Mass Spectrometry

The mammalian zona pellucida is an egg extracellular matrix to which sperm bind. Mouse zonae are composed of three glycoproteins (ZP1, ZP2, and ZP3), while rat zonae contain four (ZP1, ZP2, ZP3, and ZP4/ZPB). Mouse sperm bind to zonae comprised solely of mouse ZP2 and ZP3. In this report, we show that rat sperm also bind to these zonae, indicating that ZP2 and ZP3 contain a "minimum structure(s)" to which rodent sperm can bind, and ZP1 and ZP4/ZPB are dispensable in these two rodents. These data are consistent with our mass spectrometric analysis of the native rat zona pellucida proteome (defined as the fraction of the total rat proteome to which the zonae glycoproteins contribute) demonstrating that the rat zonae glycoproteins share a high degree of conservation of structural features with respect to their mouse counterparts. The primary sequences of the rat zonae proteins have been deduced from cDNA. Each zona protein undergoes extensive co- and post-translational modification prior to its secretion and incorporation into an extracellular zona matrix. Each has a predicted N-terminal signal peptide that is cleaved off once protein translation begins and an anchoring C-terminal transmembrane domain from which the mature protein is released. Mass spectrometric analysis with a limited amount of native material allowed determination of the mature N-termini of rat ZP1 and ZP3, both of which are characterized by cyclization of glutamine to pyroglutamate; the N-terminus of ZP2 was identified by Edman degradation. The mature C-termini of ZP1 and ZP3 end two amino acids upstream of a conserved dibasic residue that is part of, but distinct from, the consensus furin cleavage sequence, while the C-terminus of ZP2 was not determined. Each zona protein contains a "zona domain" with eight conserved cysteine residues that is thought to play a role in the polymerization of the zona proteins into matrix filaments. Partial disulfide bond assignment indicates that the intramolecular disulfide patterns in rat ZP1, ZP2, and ZP3 are identical to those of their corresponding mouse counterparts. Last, nearly all potential N-glycosylation sites are occupied in the rat zonae glycoproteins (three of three for ZP1, six or seven of seven for ZP2, and four or five of six for ZP3). In comparison, potential O-glycosylation sites are numerous (59-83 Ser/Thr residues), but only two regions were observed to carry O-glycans in rat ZP3.

Disulfide bond assignment of the Ebola virus secreted glycoprotein SGP

The non-structural glycoprotein (SGP) of Ebola virus (EboV) is secreted in large amounts from infected cells as a disulfide-linked homodimer. In this communication, highly purified SGP, derived from Vero E6 cultures infected with the Zaire species of EboV, was used to determine the correct localization of inter- and intrachain disulfide bonds. Matrix-assisted laser desorption/ionization-time-of-flight mass spectrometry analysis of proteolytic cleavage fragments indicates that all cysteines (six per monomeric unit) form unique disulfide bonds. Monomers of the SGP homodimer are joined in a parallel manner by two intersubunit disulfide bonds formed between paired N-terminal and C-terminal cysteines (C53–C53′ and C306–C306′). The remaining cysteines are involved in intrachain disulfide bonding (paired as C108–C135 and C121–C147), which resembles the disulfide bond topology of fibronectin type II domains. The findings presented here provide the foundation for future studies aimed at defining the structural and functional properties of SGP.

Hierarchical Formation of Disulfide Bonds in the Immunoglobulin Fc Fragment Is Assisted by Protein-disulfide Isomerase

Antibodies provide an excellent system to study the folding and assembly of all beta-sheet proteins and to elucidate the hierarchy of intra/inter chain disulfide bonds formation during the folding process of multimeric and multidomain proteins. Here, the folding process of the Fc fragment of the heavy chain of the antibody MAK33 was investigated. The Fc fragment consists of the C(H)3 and C(H)2 domains of the immunoglobulin heavy chain, both containing a single S-S bond. The folding process was investigated both in the absence and presence of the folding catalyst protein-disulfide isomerase (PDI), monitoring the evolution of intermediates by electrospray mass spectrometry. Moreover, the disulfide bonds present at different times in the folding mixture were identified by mass mapping to determine the hierarchy of disulfide bond formation. The analysis of the uncatalyzed folding showed that the species containing one intramolecular disulfide predominated throughout the entire process, whereas the fully oxidized Fc fragment never accumulated in significant amounts. This result suggests the presence of a kinetic trap during the Fc folding, preventing the one-disulfide-containing species (1S2H) to reach the fully oxidized protein (2S). The assignment of disulfide bonds revealed that 1S2H is a homogeneous species characterized by the presence of a single disulfide bond (Cys-130-Cys-188) belonging to the C(H)3 domain. When the folding experiments were carried out in the presence of PDI, the completely oxidized species accumulated and predominated at later stages of the process. This species contained the two native S-S bonds of the Fc protein. Our results indicate that the two domains of the Fc fragment fold independently, with a precise hierarchy of disulfide formation in which the disulfide bond, especially, of the C(H)2 domain requires catalysis by PDI.

Determination of Disulfide Bond Assignment of Human Vitamin K-dependent γ-Glutamyl Carboxylase by Matrix-assisted Laser Desorption/Ionization Time-of-Flight Mass Spectrometry

Vitamin K-dependent gamma-glutamyl carboxylase is a 758 amino acid integral membrane glycoprotein that catalyzes the post-translational conversion of certain protein glutamate residues to gamma-carboxyglutamate. Carboxylase has ten cysteine residues, but their form (sulfhydryl or disulfide) is largely unknown. Pudota et al. in Pudota, B. N., Miyagi, M., Hallgren, K. W., West, K. A., Crabb, J. W., Misono, K. S., and Berkner, K. L. (2000) Proc. Natl. Acad. Sci. U. S. A. 97, 13033-13038 reported that Cys-99 and Cys-450 are the carboxylase active site residues. We determined the form of all cysteines in carboxylase using in-gel protease digestion and matrix-assisted laser desorption/ionization mass spectrometry. The spectrum of non-reduced, trypsin-digested carboxylase revealed a peak at m/z 1991.9. Only this peak disappeared in the spectrum of the reduced sample. This peak's m/z is consistent with the mass of peptide 92-100 (Cys-99) disulfide-linked with peptide 446-453 (Cys-450). To confirm its identity, the m/z 1991.9 peak was isolated by a timed ion selector as the precursor ion for further MS analysis. The fragmentation pattern exhibited two groups of triplet ions characteristic of the symmetric and asymmetric cleavage of disulfide-linked tryptic peptides containing Cys-99 and Cys-450. Mutation of either Cys-99 or Cys-450 caused loss of enzymatic activity. We created a carboxylase variant with both C598A and C700A, leaving Cys-450 as the only remaining cysteine residue in the 60-kDa fragment created by limited trypsin digestion. Analysis of this fully active mutant enzyme showed a 30- and the 60-kDa fragment were joined under non-reducing conditions, thus confirming Cys-450 participates in a disulfide bond. Our results indicate that Cys-99 and Cys-450 form the only disulfide bond in carboxylase.

Implementation of an algorithm for modeling disulfide bond patterns using mass spectrometry.

The paper describes the implementation of a software system based on the Fenyö disulfide bond assignment algorithm. The system allows an investigator to enter data derived from mass spectrum peak assignments, a target protein sequence and other experimental conditions. The output of the system is the set of disulfide bonding pattern models that are consistent with the experimental evidence. The software and code are available through a public web site, which also has a functioning, publicly accessible version of the disulfide bond modeler. This implementation was tested as part of a project to check homology-based assignments disulfide bonding patterns of human integrins.

Complete disulfide bond assignment of a recombinant immunoglobulin G4 monoclonal antibody

Recombinant monoclonal antibodies (mAbs) are an emerging therapeutic area. However, there are few reports on disulfide bond assignment of recombinant mAbs. This work describes the complete disulfide bond assignment of a recombinant immunoglobulin G4 (IgG4) mAb. N-ethylmaleimide (NEM) was used to mask free sulfhydryl groups present in the mAb. Digestion of the mAb with endoproteinase Lys-C without disulfide scrambling was achieved by denaturing the mAb in the presence of NEM in guanidine hydrochloride (GuHCl). The Lys-C digest was subsequently reduced with dithiothreitol (DTT). Native and reduced Lys-C digests were mass analyzed by on-line reversed-phase–high-performance liquid chromatography mass spectrometry (RP–HPLC/MS). Disulfide-containing peptides were sequenced by off-line nanoelectrospray quadrupole time-of-flight mass spectrometry (nanoESI-QTOF MS) and N-terminal Edman sequencing for verifying connectivities. The recombinant IgG4 mAb was found to contain the expected disulfide linkages with the proposed method. The NEM alkylating reagent was critical in minimizing disulfide scrambling during the denaturation and digestion of the mAb. This integrated approach, combining MS and N-terminal Edman sequencing, was capable of assigning the disulfide pattern of the IgG4 mAb rapidly and completely, and should be applicable for disulfide bond assignment and structural analysis of other mAbs and large proteins with multiple disulfide bonds.

Partial reduction and two-step modification of proteins for identification of disulfide bonds.

An experimental protocol was established to combine partial reduction, cyanylation, and a second modification step for the assignment of disulfide bonds in proteins that are resistant to proteolysis under native conditions. After proteolysis, disulfide bonds were assigned via MALDI mass spectrometry with subsequent semiautomatic interpretation using the program SearchXLinks, which enumerates all possible combinations of proteolytic fragments for all observed monoisotopic masses. The putative assignment of disulfide bonds was confirmed by ISD and PSD fragmentation of the corresponding protonated molecules.

Assignment of disulfide bonds in proteins by chemical cleavage and peptide mapping by mass spectrometry.

Among the twenty amino acids that comprise proteins, cysteine has unique properties. It may contribute to protein biological functions by using its sulfhydryl (-SH) group in the active site for enzyme catalysis such as in cysteine proteases, as the chelating site for metal ions, or as the active site of disulfide-reshuffling enzymes (). The oxidation of sulfhydryl groups to form a disulfide bond is one of the most common posttranslational modifications in proteins. Disulfide bonds play an important role in folding/refolding processes and in maintaining the three-dimensional structure of proteins. The determination of disulfide-bond linkage is therefore an integral part of structural characterization of proteins ().

Combined use of ESI-MS and UV diode-array detection for localization of disulfide bonds in proteins: application to an alpha-L-fucosidase of pea.

A simplified strategy is described for the assignment of disulfide bonds in proteins of medium to high molecular mass (10-30 kDa). The method combines the use of high-performance liquid chromatography coupled to electrospray ionization mass spectrometry (HPLC-ESI-MS) and HPLC with UV diode-array detection (HPLC diode array). The denatured protein is subjected to proteolysis and the peptide mixture is divided into three fractions: (i) underivatized peptides, (ii) ethylpyridylated peptides, and (iii) reduced and ethylpyridylated peptides. The three peptide ensembles are then subjected to chromatographic and spectroscopic analysis. A systematic methodology is described to analyze the large amount of data obtained. The method was applied to the localization of disulfide bonds in alpha-L-fucosidase from pea. The two disulfide bonds were located between residues Cys64 and Cys109 and between Cys162 and Cys169, while Cys127 was free.

Disulfide bond assignment, lipid transfer activity and secondary structure of a 7‐kDa plant lipid transfer protein, LTP2

The 7-kDa lipid transfer proteins, LTP2s, share some amino-acid sequence similarities with the 9-kDa isoforms, LTP1s. Both proteins display an identical cysteine motif and, in this regard, LTP2s have been classified as lipid transfer proteins. However, in contrast with LTP1s, no data are available on their structure, cysteine pairings, lipid transfer and lipid binding properties. We reported on the isolation of two isoforms of 7-kDa lipid transfer protein, LTP2, from wheat seeds and showed for the first time that they indeed display lipid transfer activity. Trypsin and chymotrypsin digestions of the native LTP2 afforded the sequence of both isoforms and assignment of disulfide bonds. The cysteine pairings, Cys10--Cys24, Cys25--Cys60, Cys2--Cys34, Cys36--Cys67, revealed a mismatch at the Cys34-X-Cys36 motif of LTP2 compared to LTP1. Moreover, the secondary structure as determined by circular dichroism suggested an identical proportion of alpha helices, beta sheets and random coils. By analogy with the structure of the LTP1, we discussed what structural changes are required to accommodate the LTP2 disulfide pattern.