Distribution Of Surficial Sediments Research Articles

Assessing the spatial distribution of elemental concentrations in surface sediments of Lake Victoria, Kenya: implications for ecological health and management.

Lacustrine sediment quality indicates the effects of both natural and anthropogenic activities on the ecosystem and communities. Despite its ecological importance, myriad complexities, and potential contaminant sources, the spatial distribution of surficial sediments in Lake Victoria's Winam Gulf has never been comprehensively documented. The purpose of this study was to assess the spatial distribution, pathways, and ecological risk of metal elements in the lake using a sediment matrix. Sediment samples were collected throughout the gulf in November 2022. The concentrations of Al, As, Cd, Co, Cr, Cu, Fe, K, Mn, Mo, Ni, P, Pb, Sb, Sn, Ti, Tl, U, and Zn were compared to different contamination metrics and ecological risk assessment indices. The average concentrations were in the following decreasing order: Zn > > > Cr > > Cu > Ni > Pb > Co > As > Cd with mean (± SD) of 185 ± 45mgkg-1, 56 ± 15mgkg-1, 45 ± 16mgkg-1, 37 ± 11mgkg-1, 24 ± 5mgkg-1, 20 ± 7mgkg-1, 3.9 ± 1.3mgkg-1, 0.30 ± 0.09mgkg-1, respectively, with strong indications of anthropogenic sources. Average concentrations were in the following decreasing order: Zn > > > Cr, Cu, Ni, Pb, Co, As, and Cd levels (mean ± SD) were 185 ± 45mgkg-1, 56 ± 15mgkg-1, 45 ± 16mgkg-1, 37 ± 11mgkg-1, 24 ± 5mgkg-1, 20 ± 7mgkg-1, 3.9 ± 1.3mgkg-1 and 0.30 ± 0.09mgkg-1 with strong indications of anthropogenic sources. The geo-accumulation index (Igeo) and enrichment factor categorisation schemes, respectively, classified these as uncontaminated (level 0) and depletion to minimal enrichment (level 1), while the ecological risk analysis classified them as "low risk". The mouth of the Nyando River, as well as Kisumu, Kendu, and Homa bays, were the most element-enriched and should be prioritised for focused monitoring and remediation. As a result, targeted land management of urban, industrial, transportation, and agricultural areas offers the opportunity to reduce sediment inputs into the lake ecosystem.

Multitemporal Acoustic Backscatter Data Analysis to Monitor the Dynamics of Seabed Surface Sediments

Backscatter strength is a product of underwater acoustic remote sensing. This study used a multibeam echosounder as an acoustic remote sensing instrument to collect backscatter strength data. These data are then used to classify the surficial sediment distribution. To monitor the difference in seabed sediment distribution, a time-series survey was performed to obtain multitemporal acoustic backscatter data. An EM 304 multibeam system from Kongsberg was mounted on the Research Vessel Baruna Jaya III from the Indonesia National Research and Innovation Agency (BRIN). It was used to collect backscatter data in the waters of Raja Ampat, Indonesia. The data were collected at different times, April and July 2021. Geometric and radiometric corrections were applied to these backscatter data. Based on the angular response curve analysis from acoustic backscatter strength, the research area can be classified into four seabed sediment types: boulder, gravel, sand, and mud. A comparison of both time series backscatter data shows that the boulder and gravel areas increased by 13.6% and 19.0%, respectively. Elsewhere, the area with sediment types of sand and mud diminished by 30.5% and 2.0%. The change in the sediment type area occurred as much as 50.5%, while the remaining 49.5% area remained unchanged. This resulting value is apparently derived from the steep topography that rapidly changes sediment distribution. One such suggestion is that sediment sampling should be performed to confirm the model from angular response curve analysis.

Multitemporal Acoustic Backscatter Data Analysis to Monitor the Dynamics of Seabed Surface Sediments

Backscatter strength is a product of underwater acoustic remote sensing. This study used a multibeam echosounder as an acoustic remote sensing instrument to collect backscatter strength data. These data are then used to classify the surficial sediment distribution. To monitor the difference in seabed sediment distribution, a time-series survey was performed to obtain multitemporal acoustic backscatter data. An EM 304 multibeam system from Kongsberg was mounted on the Research Vessel Baruna Jaya III from the Indonesia National Research and Innovation Agency (BRIN). It was used to collect backscatter data in the waters of Raja Ampat, Indonesia. The data were collected at different times, April and July 2021. Geometric and radiometric corrections were applied to these backscatter data. Based on the angular response curve analysis from acoustic backscatter strength, the research area can be classified into four seabed sediment types: boulder, gravel, sand, and mud. A comparison of both time series backscatter data shows that the boulder and gravel areas increased by 13.6% and 19.0%, respectively. Elsewhere, the area with sediment types of sand and mud diminished by 30.5% and 2.0%. The change in the sediment type area occurred as much as 50.5%, while the remaining 49.5% area remained unchanged. This resulting value is apparently derived from the steep topography that rapidly changes sediment distribution. One such suggestion is that sediment sampling should be performed to confirm the model from angular response curve analysis.

Comparison between different spatial interpolation methods for the development of sediment distribution maps in coastal areas

Sediment grain size and its spatial distribution is a very important aspect for many applications and processes that occur in the coastal zone. One of these is coastal erosion which is strongly dependent on sediment distribution and transportation. To highlight this fact, surficial coastal sediments were collected from a densely populated coastal zone in Western Greece, which suffers extensive erosion, and grain size distribution was thoroughly analysed, to predict the spatial distribution of the median grain size diameter (D50) and produce sediment distribution maps. Four different geostatistical interpolation techniques (Ordinary Kriging, Simple Kriging, Empirical Bayesian Kriging and Universal Kriging) and three deterministic (Radial Basis Function, Local Polynomial Interpolation, and Inverse Distance Weighting) were employed for the construction of the respective surficial sediment distribution maps with the use of GIS. Moreover, a comparative study between the deterministic and geostatistical approaches was applied and the performance of each interpolation method was evaluated using cross-validation and estimating the Pearson Corellation and the coefficient of determination (R2). The best interpolation technique for this research proved to be the Ordinary Kriging for the shoreline materials and the Empirical Bayesian Kriging (EBK) for the seabed materials since both had the lowest prediction errors and the highest R2.

Erosion and siltation dynamics in an urban-influenced coastal setting, Xiamen Island, China

The evolution of seafloor erosion-siltation in urban bays has received wide attention owing to its high susceptibility to natural factors and human activity, Xiamen is a typical coastal city in China that has undergone rapid urban development. Here, we studied seafloor erosion-siltation in the sea to the east of Xiamen Island. In particular, we focused on the responses of erosion-siltation to changes in the natural environmental factors and intensive human activity. The spatial distribution and transport trends of surficial sediments, changes in sedimentary records, and erosion-siltation dynamics were analyzed based on surficial sediments, core sediment within a time span of ca.100 years, and new and historical bathymetric data. The results showed that surficial sediments were mainly transported to the northwest and southwest, three stage changes in sedimentary records have occurred, the shoreline gradually moved seaward and became straighter, and the erosion-siltation state shifted from slight erosion to siltation. Before the 1930s, climate change with alternating aridity and humidity controlled the influence area of the Jiulong River sediment input. During the subsequent period (1930s to the early 1970s) of enhanced human activity in the drainage basin, the increased river sediment input only promoted siltation in some of the study areas; however, after the 1970s, river sediment input was no longer a dominant factor in the evolution of erosion-siltation. During the rapid urban development in Xiamen, coastal development and construction on Xiamen Island resulted in a large influx of sediment into the sea directly. This compensated for the decreased river sediment input and shifted the study area toward siltation. Meanwhile, rapid siltation was triggered in some of sediment convergence areas and the Jinmen Channel, where the dredging and maintenance demands were low. While channel dredging and maintenance coupled with sediment back siltation caused significant short-term topography changes in the Xiamen East Channel. Land reclamation directly shrank tidal flats along Xiamen Island. Moreover, normal wind-generated waves and occasional intensification typhoon events affected the long-term evolution of these tidal flats via persistent erosion coupled with coastal transport, and drastic short-term erosion, respectively.

Sediment Characteristics and Intertidal Beach Slopes along the Jiangsu Coast, China

Tidal flats play an important role in promoting coastal biodiversity, defense against flooding, land reclamation and recreation. Many coastal tidal flats, especially the tide-dominant ones, are muddy. However, the number of studies on the profile shape and surficial sediment distribution of muddy tidal flats is small compared to sandy beaches. Based on high spatial-resolution measurements along the tide-dominant Jiangsu Coast, China, we analyzed the morphology and sediment characteristics of the unvegetated intertidal flats along the Jiangsu Coast. The Jiangsu Coast can be divided into an eroding northern part (north coast) and an accreting southern part (south coast). The beach slope of the north coast shows a southward flattening trend, apart from some outliers related to rocky parts of the coastline. We found alternating very fine and coarse sediment (depending on the local clay content) for different locations along the north coast, which can be explained from consolidation and armoring-induced erosion resistance. In the south coast, we found gradual coarsening of bed surface sediment and gradual flattening of beach slopes to the south. This seemingly unexpected pattern is explained by the flood-dominant current causing landward sediment transport, larger tidal range in the south part, sheltering effect of the Radial Sand Ridges, and contribution of different sediment sources, viz. the Abandoned Yellow River Delta and the Radial Sand Ridges. In the cross-shore direction, the sediment grain size decreases landward. Waves are only of secondary importance for the sediment dynamics at the unvegetated tidal flats along the Jiangsu Coast.

Sediment deposition in the central Hauraki Gulf, New Zealand

Based on the analysis of 14 short sediment cores, we present new insights into the distribution of surficial sediments in the central Hauraki Gulf, a semi-enclosed coastal embayment on the northeast coast of New Zealand’s North Island. We identify and discuss the effects of interaction of modern wind-generated waves and currents with regard to deposition and reworking of sediments in the Gulf. The modern hydrodynamic regime is controlled by tidal currents, oceanic inflows, and wave-induced currents and it is responsible for a N-S gradient in sediment texture and elemental concentrations in the central Hauraki Gulf sediments. The present-day sediment input into the system is generally low and consists of fine-grained fluvial sediments mostly deposited in the southern study area and comparatively high inputs of relict carbonate material to the northern study sites. The central Hauraki Gulf sediments, which show numerous age reversals in the sedimentary record, can be characterised as palimpsest sediments, as a consequence of continuous reworking and storm-induced sediment transport. In view of the new data, a previously assumed significant post-transgression accumulation of sediments of > 10 m in the central Hauraki Gulf appears to be very unlikely.

Controls on downstream variation in surficial sediment size of an outwash braidplain developed under high Arctic conditions (Kaffiøyra, Svalbard)

The changes in morphology and surficial sediments of an outwash braidplain developed under high Arctic conditions are closely related to geomorphic processes, tectonic conditions and climate variations, and are affected by the existence of permafrost. These factors control the changes in river channel slope, their morphology and active braidplain width, which influence the downstream variation in grain size of outwash surficial sediments. Interdependence between these parameters has not previously been considered in relation to the spatial distribution of surficial sediments of outwash braidplain developed in the forefield of a retreating subpolar glacier. In this study, controls affecting the surficial lithology of the Waldemar River outwash (NW Spitsbergen, Svalbard) were recognised and indicated multiple correlations between the downstream changes in sediment texture, the geomorphometry of distributary channels, and outwash surface slope. Due to this, the techniques of multivariate regression modelling, artificial neural network and multivariate adaptive regression splines were used. Results show that observed relations between the sedimentary and morphological features indicate the existence of thresholds for downstream variation in bed material size which are not constant. Moreover, the processes of sediment transport in an outwash braidplain are strictly related to Shields stress, which is proportional to changes in braidplain slope, median grain diameter and sediment sorting in the proximal and middle zones of the outwash, but is inversely proportional to median grain diameter in the distal zone, contrary to Shields' bed-material threshold entrainment model. The results of this study will help understand outwash fan and plain evolution in paraglacial landscapes under conditions of changeable rate and source of sediment supply and transport capacity.

Geology datasets in North America, Greenland and surrounding areas for use with ice sheet models

Abstract. The ice–substrate interface is an important boundary condition for ice sheet modelling. The substrate affects the ice sheet by allowing sliding through sediment deformation and accommodating the storage and drainage of subglacial water. We present three datasets on a 1 : 5 000 000 scale with different geological parameters for the region that was covered by the ice sheets in North America, including Greenland and Iceland. The first dataset includes the distribution of surficial sediments, which is separated into continuous, discontinuous and predominantly rock categories. The second dataset includes sediment grain size properties, which is divided into three classes: clay, silt and sand, based on the dominant grain size of the fine fraction of the glacial sediments. The third dataset is the generalized bedrock geology. We demonstrate the utility of these datasets for governing ice sheet dynamics by using an ice sheet model with a simulation that extends through the last glacial cycle. In order to demonstrate the importance of the basal boundary conditions for ice sheet modelling, we changed the shear friction angle to account for a weaker substrate and found changes up to 40 % in ice thickness compared to a reference run. Although incorporation of the ice–bed boundary remains model dependent, our dataset provides an observational baseline for improving a critical weakness in current ice sheet modelling (https://doi.org/10.1594/PANGAEA.895889, Gowan et al., 2018b).

Deep sea sediments of the Arctic Central Basin: A potential sink for microplastics

Deep sea sediments have emerged as a potential sink for microplastics in the marine environment. The discovery of microplastics in various environmental compartments of the Arctic Central Basin (ACB) suggested that these contaminants were potentially being transported to the deep-sea realm of this oceanic basin. For the first time, the present study conducted a preliminary assessment to determine whether microplastics were present in surficial sediments from the ACB. Gravity and piston corers were used to retrieve sediments from depths of 855–4353 m at 11 sites in the ACB during the Arctic Ocean 2016 (AO16) expedition. Surficial sediments from the various cores were subjected to density flotation with sodium tungstate dihydrate solution (Na2WO4·2H2O, density 1.4 g cm−3). Potential microplastics were isolated and analysed by Fourier Transform Infrared (FT-IR) spectroscopy. Of the surficial samples, 7 of the 11 samples contained synthetic polymers which included polyester (n = 3), polystyrene (n = 2), polyacrylonitrile (n = 1), polypropylene (n = 1), polyvinyl chloride (n = 1) and polyamide (n = 1). Fibres (n = 5) and fragments (n = 4) were recorded in the samples. In order to avoid mis-interpretation, these findings must be taken in the context that (i) sampling equipment did not guarantee retrieval of undisturbed surficial sediments, (ii) low sample volumes were analysed (~10 g per site), (iii) replicate sediment samples per site was not possible, (iv) no air contamination checks were included during sampling and, (v) particles <100 µm were automatically excluded from analysis. While the present study provides preliminary indication that microplastics may be accumulating in the deep-sea realm of the ACB, further work is necessary to assess microplastic abundance, distribution and composition in surficial sediments of the ACB.

Relationship between Grain Size Distribution and Radon Content in Surficial Sediments of Wadi Arar, Saudi Arabia

Relationship between Grain Size Distribution and Radon Content in Surficial Sediments of Wadi Arar, Saudi Arabia

Relationship between Grain Size Distribution and Radon Content in Surficial Sediments of Wadi Arar, Saudi Arabia

Surficial sediments with low radon content are desirable materials in construction applications. In this study, the relationship between grain size and radon content was investigated in sediments collected from seven sites in Wadi Arar, Saudi Arabia, with the intent of determining whether grain size analysis could be used for rapidly assessing the suitability of potential construction materials. Thirty-five samples were collected (five per site) and the grain size distribution was determined using sieves. Radon contents were measured on composite samples with a RAD7 radon detector. Among the sediment types (gravel, coarse sand, medium sand, fine sand, and silt and clay), the best linear correlations between grain size and radon contents were found for the coarse sand (negative slope, r=0.82) and fine sand (positive slope, r=0.78). Polynomial relationships were also tested. A fourth-degree polynomial equation effectively described the correlation between grain size and radon content (R2 = 0.933). As shown by this model, the highest correlations with radon contents were detected at grain sizes smaller than 2.0 mm. Thus, grain size may be useful for preliminary site assessment work.

Surficial sediments of the Paraná Inner Continental Shelf, Southern Brazil

This study examines surficial sediment distribution patterns, slope and morphological characteristics of the Parana inner continental shelf. Parana inner continental shelf is located on the southern Brazilian continental shelf, a wide and low gradient shelf, in the vicinity of two large unfilled estuaries and the Serra do Mar mountain range. It is characterized as a wave/storm dominated continental shelf with microtidal, semidiurnal regime and a small supply of recent continental sediments. We analyzed grain-size parameters and sediment composition of 875 grab samples and investigated the inner continental shelf morphology and slope through a digital bathymetric model built from regional nautical charts. We combined and evaluated the characteristics of grain-size curves, the spatial distribution of sediments, and the morphology and slope of the inner continental shelf to identify different sedimentary facies. Sediment distribution patterns change from the coast seaward and between three defined sectors along the coastline: south, central and north inner continental shelf. This variation seems to be related to recent sediment sources and to the presence of deposits from ancient coastal plain and inner continental shelf environments formed before the last Holocene sea-level highstand. Sediments with mean diameter of fine to very fine sands prevail at all depths. Deposits of sediments with mean diameter of silt and medium to coarse sands are significant in particular areas, generally associated with steep slopes, troughs, and sand ridges. Possible causes of sedimentary patchiness are the outcropping of medium to coarse sand and the supply of recent estuarine muddy sediments provided by large estuarine complexes to the Parana inner continental shelf. The results obtained contribute to the knowledge about the sediment dynamics of Parana inner continental shelf.

Mobility of maerl-siliciclastic mixtures: Impact of waves, currents and storm events

Maerl beds are free-living, non-geniculate coralline algae habitats which form biogenic reefs with high micro-scale complexity supporting a diversity and abundance of rare epifauna and epiflora. These habitats are highly mobile in shallow marine environments where substantial maerl beds co-exist with siliciclastic sediment, exemplified by our study site of Galway Bay. Coupled hydrodynamic-wave-sediment transport models have been used to explore the transport patterns of maerl-siliciclastic sediment during calm summer conditions and severe winter storms. The sediment distribution is strongly influenced by storm waves even in water depths greater than 100 m. Maerl is present at the periphery of wave-induced residual current gyres during storm conditions. A combined wave-current Sediment Mobility Index during storm conditions shows correlation with multibeam backscatter and surficial sediment distribution. A combined wave-current Mobilization Frequency Index during storm conditions acts as a physical surrogate for the presence of maerl-siliciclastic mixtures in Galway Bay. Both indices can provide useful integrated oceanographic and sediment information to complement coupled numerical hydrodynamic, sediment transport and erosion-deposition models.

Distributions of surficial sediments and its response to dynamic actions in the Xiamen Bay sea area, China

Sediment distribution is important for morphodynamic evolution and shoreline changes in coastal zones and estuaries. In the study, the data of 230 surface sediment samples collected from the Xiamen Bay sea area in September 2008 are used to investigate the spatial distribution and sediment transport pathway. The grain size distribution of surficial sediments in the Xiamen Bay area is shown distinctly in this study. In addition, the Grain Size Transport Analysis model is used for conveying trend analysis of the sediment in this area, particularly for determining the sediment movement trend. The results indicate that eight sediment types are present for samples, with clayey silt comprising the highest percentage in the study area at 65.22%. Moreover, in the different subareas, the characteristics of grain size parameters are obviously different owing to different sediment sources and hydrodynamic conditions. Furthermore, runoff, tides, and waves are the main forces dominating sediment dynamics on the seabed and tidal flats, and the sediment movement trend is closely related to hydrodynamic conditions.

Assessment of distribution and sources of pyrogenic carbon in the lower course of the Guadiana River (SW Iberian Peninsula)

PurposeThe main goal of this work was to determine the pyrogenic carbon (PyC) distribution in surficial sediments for the last 40 km of the Guadiana River (SW Iberian Peninsula). In addition, the changes in the contribution of terrestrial and marine organic matter (OM) sources and their relationship with the PyC contents were assessed.Materials and methodsSediments were collected from 22 stations within the lower course of the Guadiana River. All the samples were analyzed for total organic carbon (TOC), total nitrogen (TN), organic carbon to nitrogen atomic ratios (C/N), and stable carbon isotope ratio (δ13C) as indicators of changes in the sources of OM. PyC was determined according to the chemo-thermal oxidation method (CTO-375).Results and discussionTOC ranged from 0.25 to 2.37 %dw. The greatest TOC contents were located in sediments collected at the middle estuary. The C/N values ranged from 7.7 to 12.7, with slight relative increase in the marine input compared to pre-Alqueva times. Similar C/N ranges are representative of native soil OM, lacustrine OM, and local sedimentary OM. The δ 13C values of the sediment samples ranged from –25.0 to –27.6 ‰ illustrating a signature of C3 higher plants, marsh-plants, lacustrine plants, and freshwater algae present in the area of study and in the forests located upstream. PyC ranged between 0.17 and 0.74 gkg−1, with the highest contents measured in samples located close to urbanized areas. Sediments collected at the middle estuary, within a rural area, showed the lowest proportions of PyC relative to the percent of TOC (≤4 % TOC). The negative relationship between PyC to TOC ratio and TOC contents confirmed the selective preservation of PyC to degradation in the sedimentary OM of the Guadiana estuary. The carbon isotope composition of the final material after applying the CTO-375 method (hereafter called δ13CPyC) was ˂–30 ‰, suggesting that the PyC fraction was mainly composed of a mixture of fossil fuels and C3-charred biomass. Nevertheless, selective loss of the less recalcitrant OM fractions due to degradation and/or chemical alteration might contribute to lighter carbon isotope values of PyC.ConclusionsGeochemical data showed that sedimentary OM was composed of a mix of different OM sources, with a slight increase in the marine input after the Alqueva dam went into operation. The PyC content was higher close to urbanized areas of the Guadiana River estuary. The selective preservation of PyC in the sedimentary OM of the Guadiana estuary was observed.

Depth shapes α- and β-diversities of microbial eukaryotes in surficial sediments of coastal ecosystems.

Little is known about the relative influence of historic processes and environmental gradients on shaping the diversity of single-celled eukaryotes in marine benthos. By combining pyrosequencing of 18S ribosomal RNA genes with data on multiple environmental factors, we investigated the diversity of microeukaryotes in surficial sediments of three basins of the Yellow Sea Large Marine Ecosystem. A considerable proportion (about 20%) of reads was affiliated with known parasitoid protists. Dinophyta and Ciliophora appeared dominant in terms of relative proportion of reads and operational taxonomic unit (OTU) richness. Overall, OTU richness of benthic microeukaryotes decreased with increasing water depth and decreasing pH. While community composition was significantly different among basins, partial Mantel tests indicated a depth-decay pattern of community similarity, whereby water depth, rather than geographic distance or environment, shaped β-diversity of benthic microeukaryotes (including both the abundant and the rare biosphere) on a regional scale. Similar hydrographic and mineralogical factors contributed to the biogeography of both the abundant and the rare OTUs. The trace metal vanadium had a significant effect on the biogeography of the rare biosphere. Our study sheds new light on the composition, diversity patterns and underlying mechanisms of single-celled eukaryote distribution in surficial sediments of coastal oceans.

Mapping bathymetry and depositional facies on Great Bahama Bank

AbstractSatellite imagery and an extensive set of water‐depth measurements have been used to map and critically evaluate the magnitude and patterns of bathymetry across Great Bahama Bank. Descriptions of previously collected sediment samples were combined with satellite imagery to map and refine the interpreted distribution of surficial carbonate sediments (depositional facies). Data reveal that 60% of Great Bahama Bank lies in 5 m or less of water. The deep portion occurs mainly in a generally east–west trending area in the southern portion of the platform. The re‐evaluation of the facies reveals that Great Bahama Bank is essentially a very grainy platform with muddier accumulations primarily in the lee of Andros Island. This area of Great Bahama Bank also experiences currents related to an excursion of the Florida Current onto the platform top; possibly enhancing sediment mud production through the generation of whitings. Sediment equivalents to mudstones, wackestones and mud‐rich packstones cover 8%, 5% and 14%, respectively, of the platform top, whereas sediment equivalents to mud‐poor packstones, grainstones and rudstones account for 20%, 45% and 3% of the surface area. Boundstones (reefs) were not specifically mapped in this study due to the resolution of the mapping. There is a poor relationship between the occurrence of the depositional texture and water depth, in that the grainier sediment types are abundant across the full range of water depths. The most abrupt lateral facies changes portrayed on the facies maps are observed leeward of islands, areas which also hold the highest diversity in facies type. The majority of the islands on the platform align with the north‐west/south‐east strike of the platform margin and these islands, in turn, exert control on the shape and orientation of facies belts that develop in proximity to them. For this reason, regions of the platform that contain principal islands host facies belts that align with the principal axis of the platform, whereas for regions lacking islands, the facies belts adopt an east–west trend consistent with prevailing winds and currents. There is a clear trend that the wide southern portion of the platform hosts the most continuous expanses of grain‐rich sediments.

Modeling interrelationships between morphological evolution and grain-size trends in back-barrier tidal basins of the East Frisian Wadden Sea

In terms of grain size, surficial sediment distribution patterns in back-barrier tidal basins (e.g., the East Frisian Wadden Sea, Germany) often show a landward fining trend from the sea boundary to the mainland shore. In addition to the cross-shore patterns, there are lateral grain-size trends toward the watersheds of the basins and toward the watersheds of tidal flats bordered by tidal channels on either side. In the present study, interrelationships between morphological evolution and grain-size trends in the back-barrier tidal basins of the East Frisian Wadden Sea were simulated for a period of 60 years by a process-based forward modeling approach using the Delft3D system. The model outputs show that grain size displays a shoreward fining trend within the basin area, which is consistent with in situ observations; such a trend can be interpreted by the shoreward decrease in the cross-shore maximum velocity. Moreover, the model predicts lateral grain-size trends similar to those observed in the tidal basins: coarser sediment remains in the inlets and channels, while finer sediment settles at the tidal watersheds and on the tidal flats between channels. The spatial patterns of tidal flat sediment grain size within the tidal basins are thus related to the distance from the sea boundary and from the tidal channels. The modeling exercise also indicates that the development of the grain-size pattern observed in the East Frisian Wadden Sea is accomplished within a few decades, and that the time periods required to reach equilibrium are much shorter for grain size than for bed elevation. Evidently, spatial grain-size information can be used to assess sediment transport and morphological adaptation processes as, for example, attempted in sediment trend analysis procedures.

An evaluation of compiled single-beam bathymetry data as a basis for regional sediment and biotope mapping

Abstract Maps of surficial sediment distribution and benthic habitats or biotopes provide invaluable information for ocean management and are at the core of many seabed mapping initiatives, including Norway's national offshore mapping programme MAREANO (www.mareano.no). Access to high-quality multibeam echosounder data (bathymetry and backscatter) has been central to many of MAREANO's mapping activities, but in order to maximize the cost-effectiveness of future mapping and ensure timely delivery of scientific information, seabed mappers worldwide may increasingly need to look to existing bathymetry data as a basis for thematic maps. This study examines the potential of compiled single-beam bathymetry data for sediment and biotope mapping. We simulate a mapping scenario where full coverage multibeam data are not available, but where existing bathymetry datasets are supplemented by limited multibeam data to provide the basis for thematic map interpretation and modelling. Encouraging results of sediment interpretation from the compiled bathymetry dataset suggest that production of sediment grain size distribution maps is feasible at a 1:250 000 scale or coarser, depending on the quality of available data. Biotope modelling made use of full-coverage predictor variables based on (i) multibeam data, and (ii) compiled single-beam data supplemented by limited multibeam data. Using the same response variable (biotope point observations obtained from video data), the performance of the respective models could be assessed. Biotope distribution maps based on the two datasets are visually similar, and performance statistics also indicate there is little difference between the models, providing a comparable level of information for regional management purposes. However, whilst our results suggest that using compiled bathymetry data with limited multibeam is viable as a basis for regional sediment and biotope mapping, it is not a substitute. Backscatter data and the better feature resolution provided by multibeam data remain of great value for these and other purposes.