Distribution Of Bone Mineral Content Research Articles

Bone Mineral Content Distribution in Response to Long-term Training of Elite Rowers.

Bone response to exercise depends on the type and size of the mechanical stimulus. In rowing, athletes are exposed to low mechanical but large compression loads mainly on the trunk. Thus, this study aimed to investigate the impact of rowing on total and regional bone quality and bone turnover parameters in elite rowing athletes vs. control subjects. Twenty world-class rowers and twenty active, but not athletic, men participated in the study. Bone mineral density (BMD) and body mineral content (BMC) were assessed by dual-energy X-ray absorptiometry (DXA). Bone turnover markers (OPG and RANKL) in serum were assessed by Elisa method. The current research revealed no statistical difference in total bone mineral density (TBMD) and total body mineral content (TBMC) between elite-level rowers and control subjects. Nevertheless, Trunk BMC (p=0.02) and Trunk BMC/TBMC ratio (p=0.01) were significantly higher in rowers than those in the control group. In contrast, in the control group, the Lower limbs BMC/TBMC ratio (p=0.007) was statistically higher. Furthermore, RANKL (p=0.011) and OPG (p=0.03) were statistically significantly higher in rowers, whereas the OPG/RANKL ratio (p=0.012) was statistically higher in the control group. Rowing, as a non-weight-bearing exercise, did not alter total bone density but induced a remarkable redistribution of bone density from the lower limbs to the trunk. In addition, the current evidence suggests that the underlying molecular mechanism is based on turnover of intermediates, rather than solely bone redistribution.

Optimization of the failure criterion in micro-Finite Element models of the mouse tibia for the non-invasive prediction of its failure load in preclinical applications

New treatments against osteoporosis require testing in animal models and the mouse tibia is among the most common studied anatomical sites. In vivo micro-Computed Tomography (microCT) based micro-Finite Element (microFE) models can be used for predicting the bone strength non-invasively, after proper validation against experiments. The aim of this study was to evaluate the ability of different microCT-based bone parameters and microFE models to predict tibial structural mechanical properties in compression. Twenty tibiae were scanned at 10.4 μm voxel size and subsequently tested in uniaxial compression at 0.03 mm/s until failure. Stiffness and failure load were measured from the load-displacement curves. Standard morphometric parameters were measured from the microCT images. The spatial distribution of bone mineral content (BMC) was evaluated by dividing the tibia into 40 regions. MicroFE models were generated by converting each microCT image into a voxel-based mesh with homogeneous isotropic material properties. Failure load was estimated by using different failure criteria, and the optimized parameters were selected by minimising the errors with respect to experimental measurements. Experimental and predicted stiffness were moderately correlated (R2 = 0.65, error = 14% ± 8%). Normalized failure load was best predicted by microFE models (R2 = 0.81, error = 9% ± 6%). Failure load was not correlated to the morphometric parameters and weakly correlated with some geometrical parameters (R2 < 0.37). In conclusion, microFE models can improve the current estimation of the mouse tibia structural properties and in this study an optimal failure criterion has been defined. Since it is a non-invasive method, this approach can be applied longitudinally for evaluating temporal changes in the bone strength.

Quantification of Volumetric Bone Mineral Density of Proximal Femurs Using a Two-Compartment Model and Computed Tomography Images.

Objectives Dual-energy X-ray absorptiometry (DXA) is frequently used to measure the areal bone mineral density (aBMD) in clinical practice. However, DXA measurements are affected by the bone thickness and the body size and are unable to indicate nonosseous areas within the trabecular bone. This study aims to quantify the volumetric bone mineral density (vBMD) using computed tomography (CT) images and the two-compartment model (TCM) methods. Methods The TCM method was proposed and validated by dipotassium phosphate (K2HPO4) phantoms and a standard forearm phantom. 28 cases with DXA scans and pelvic CT scans acquired within six months were retrospectively collected. The vBMD calculated by TCM was compared with the aBMD obtained from DXA. Results For the K2HPO4 phantoms with vBMD ranging from 0.135 to 0.467 g/cm3, the average difference between the real and calculated vBMD was 0.009 g/cm3 and the maximum difference was 0.019 g/cm3. For the standard forearm phantom with vBMD of 0.194, 0.103, and 0.054 g/cm3, the average differences between the real and calculated vBMD were 0.017, 0.014, and 0.011 g/cm3. In the clinical CT image validation, a good linear relationship between vBMD and aBMD was observed with the Pearson correlation coefficient of 0.920 (p < 0.01). Conclusions The proposed TCM method in combination with the homemade cortical bone equivalent phantom provides accurate quantification and spatial distribution of bone mineral content.

Effect of integration time on the morphometric, densitometric and mechanical properties of the mouse tibia

Micro-Computed Tomography (microCT) images are used to measure morphometric and densitometric properties of bone, and to develop finite element (FE) models to estimate mechanical properties. However, there are concerns about the invasiveness of microCT imaging due to the X-rays ionising radiation induced by the repeated scans on the same animal. Therefore, the best compromise between radiation dose and image quality should be chosen for each preclinical application. In this study, we investigated the effect of integration time (time the bone is exposed to radiation at each rotation step during microCT imaging) on measurements performed on the mouse tibia. Four tibiae were scanned at 10.4 µm voxel size using four different procedures, characterized by decreasing integration time (from 200 ms to 50 ms) and therefore decreasing nominal radiation dose (from 513 mGy to 128 mGy). From each image, trabecular and cortical morphometric parameters, spatial distribution of bone mineral content (BMC) in the whole tibia and FE-based estimations of stiffness and strength were obtained. A high-resolution scan (4.3 µm voxel size) was used to quantify measurement errors. Integration time had the largest effect on trabecular morphometric parameters (7–28%). Lower effects were observed on cortical parameters (1–3%), BMC (1–10%) distribution, and FE-based estimations of mechanical properties (1–3%). In conclusion, the effect of integration time on image-based measurements has been quantified. This data should be considered when defining the in vivo microCT scanning protocols in order to find the best compromise between nominal radiation exposure and accuracy in the estimation of bone parameters.

Distribution of Bone Mineral Content Is Associated with Body Weight and Exercise Capacity in Patients with Chronic Obstructive Pulmonary Disease

Background: Although low bone mineral density is highly prevalent in patients with chronic obstructive pulmonary disease (COPD), the distribution of the reduced bone mass has not been fully elucidated. Objectives: To determine regional bone mass loss in patients with COPD and investigate whether the change in distribution may be associated with body weight loss and functional capacity. Methods: Body mass index (BMI) was assessed, and height squared indices were derived for the bone mineral content index (BMCI) of the arms, legs and trunk by dual-energy X-ray absorptiometry in 45 male patients with COPD and 12 age- and sex-matched control subjects. Pulmonary function tests were performed, and maximal oxygen uptake (V·O₂max) was measured. Results: The BMCI was lower in the total bone, legs and trunk of patients with COPD than in control subjects, although the BMCI in the arms was similar between the groups. BMI correlated significantly with the BMCI in all 3 segments. Bone mineral content (BMC) in the trunk, expressed as a percentage of total BMC (BMC trunk/total BMC), correlated significantly with BMI. The BMCI in the trunk was closely related with V·O₂max but not with airflow limitation. Conclusions: There was a regional difference in BMC reduction, but a predominant reduction of bone mass in the trunk was not associated with the severity of airflow limitation but rather with body weight loss and exercise intolerance. These data suggest that body weight loss and exercise intolerance are important risk factors for vertebral fracture in patients with COPD.

Measurement of Bovine Bone Properties through Surface Indentation Technique

The mechanical and microstructural properties of cortical bovine bone have been extensively studied due to the fact that its micro-structural components would significantly reflect the global mechanical behavior of the bone. The objective of this article is to study the elastic modulus and hardness of a bovine cortical bone, in both longitudinal and transverse directions by using nanoindentation technique. The moduli in the longitudinal and transverse directions were recorded as 16.23 GPa and 10.26 GPa, respectively. While the hardness readings in the longitudinal and transverse directions were 0.505 GPa and 0.387 GPa, respectively. According to the result shown, it is suggested that heterogeneous properties of the bone is assumed and the measurements of their properties are highly dependent on tissue types, anatomical location and bone mineral content distribution.

Effect of microstructure on the mechanical properties of Haversian cortical bone

The mechanical properties of cortical bone have been extensively studied at the macrostructural scale. However, knowledge of the macroscopic mechanical properties is not sufficient to predict local phenomena, such as damage or bone remodeling, both of which are dependent on local mechanical behavior. The objective of this study is to quantify the mechanical properties of cortical bone at several length scales, with emphasis on the microstructure of Haversian systems. Samples of mature bovine cortical bone, with a Haversian microstructure, were obtained from the posterior area of the mid-femoral diaphysis. A nanoindentation technique was used to measure the local Young’s modulus. The distribution of the bone mineral content was obtained by backscattered electron imaging using a scanning electron microscope. A novel compression device employing microextensometry techniques was developed to quantify local strains. Digital image correlation was performed on the microstructure imaged by optical microscopy during compression tests. This study demonstrated that the local Young’s modulus and strain were heterogeneous at the scale of an osteon. For both properties, the ratio between the maximum and minimum values was approximately two. The local Young’s modulus and bone-mineral content were reasonably correlated ( r 2 = 0.75; P < 0.0001), but this was not the case for the distribution of local strains versus bone mineral content ( r 2 = 0.395; P < 0.0001). Hence, local strains cannot be described simply in terms of the bone mineral content, as the Haversian canal and osteonal microstructure have a major influence on these properties. In conclusion, the microstructure must be considered in evaluating the local strain and stress fields of cortical bone.

Effects of gender and age differences on the distribution of bone content in the third lumbar vertebra.

A cross-sectional study on the distribution of bone mineral content in the third lumbar vertebrae. To evaluate the effects of age and gender on the distribution of bone mineral content in the third lumbar vertebrae. Compression fractures occur mainly at the vertebral body. Variations in the distribution of bone mass in a vertebra, if undefined, may bias the ability of the acquired bone mineral density values, which was usually measured posteroanteriorly, to predict the risk of fractures. The bone mineral content of the whole L3, including the L3 vertebral body and the posterior segment, was measured using a lateral approach with a dual energy radiograph absorptiometer on 177 healthy Taiwanese adults including 65 men and 55 premenopausal and 57 postmenopausal women. The proportion of bone mineral content in the vertebral body was significantly lower in premenopausal women than in age-matched men (39.1 +/- 0.9% vs. 50.0 +/- 1.7%, P < 0.0001). Furthermore, whereas postmenopausal women showed a decreased proportion of bone mineral content in the vertebral body with increased age (about -0.0022 per year, P = 0.0001), premenopausal women and men showed a sustained proportion. The proportion of bone mineral content distributed in the body of L3 vertebrae was lower in women than in men. The discrepancy of this parameter between the genders was even larger with increased ages.

Accuracy, precision, and homogeneity effects in the determination of the bone mineral content with dual photon absorptiometry in the heel bone

In this work the distribution of bone mineral content (BMC) in the calcaneus has been studied by means of dual photon absorptiometry. The bone mineral content determined according to the described method is corrected for the amount of fat and lean soft tissue in the path of the radiation beam. It is found that the bone mineral content shows a large variation in the calcaneus. There does, however, exists a homogeneous region in the central part of the calcaneus. The in vitro precision of the technique has been determined to be 1.02%, and the in vivo precision has been found to be 2.8%. The correlation coefficient between ashed bone mass and measured BMC value was 0.97.