Response Distortion Research Articles

Giant piezoelectricity in antiferromagnetic CrS2 and CrSe2 monolayers

Abstract Two-dimensional (2D) materials, particularly transition metal dichalcogenides (TMDs), have garnered significant attention in the nanoscale piezoelectric field due to their high crystallinity and ability to withstand large strains. Through density-functional theory calculations, we have discovered that monolayer H-phase CrS2 and CrSe2 exhibit antiferromagnetic semiconducting properties, in contrast to the previously held belief that they were nonmagnetic (NM) semiconductors. While the piezoelectric coefficients of NM CrS2 and CrSe2 are comparable to those of MoS2, their antiferromagnetic ground states demonstrate significantly enhanced piezoelectric coefficients ( d 11 ) of 27.66 pm V−1 and 52.36 pm V−1, respectively. These values exceed that of MoS2 by an order of magnitude, marking the highest recorded for TMD materials and the highest in 2D magnetic materials to date. The greatly enhanced piezoelectric responses in the antiferromagnetic states of CrS2 and CrSe2 compared to their NM states arise from three primary factors. Firstly, the displacement of the Wannier center under strain is more pronounced in the antiferromagnetic state, leading to a greater change in dipole moment (enhanced clamped-ion contribution). Secondly, there is a heightened polarization change due to internal atomic distortions (internal-strain term) in response to macroscopic strain in the antiferromagnetic state. Thirdly, the material undergoes a softening of the elastic coefficient in its antiferromagnetic state. These findings open new avenues for designing high-performance piezoelectric and magnetic multifunctional materials.

Development of an Inconsistent Responding Scale for the Big Five Inventory-2

The Big Five Inventory − 2 (BFI-2) is a commonly used self-report assessment of normal personality trait domains (Extraversion, Agreeableness, Conscientiousness, Negative Emotionality, Open-Mindedness) and facets. To date, however, no direct measures of response distortion have been developed for it to identify potentially invalid responses. Such distortions (e.g., careless or random responding) can adversely impact data quality. The current study developed and provided initial validation data for an inconsistent responding scale within the BFI-2 to identify careless responders using two large undergraduate samples and a community sample. To create the scale, we first identified highly correlated BFI-2 item pairs in one undergraduate sample (N = 1,461) and then computed a total score by summing the absolute differences of these item pairs. This scale, the Detection of Response Inconsistency Procedure (DRIP), differentiated randomly generated and genuine data and generally correlated as expected with personality domains and other inconsistent responding scales across samples. The DRIP also incrementally predicted random data beyond a composite of items with exceptionally high or low base rates of endorsement from the Comprehensive Infrequency/Frequency Item Repository. We provide recommendations for DRIP cut scores that can detect careless responding while balancing sensitivity and specificity.

A Psychophysiological Investigation of Mechanisms Underlying "Feeling Fat" in Women With and WithoutBinge Eating.

"Feeling fat", the somatic experience of being overweight not fully explained by objective body weight, is considered to be an eating pathology maintenance factor. The traditional clinical understanding of "feeling fat" is based on the body displacement hypothesis, which suggests that negative emotions are projected onto the body and experienced as "feeling fat" in lieu of adaptive emotion regulation. A more recent theory suggests that "feeling fat" occurs in response to thought-shape fusion (TSF), a cognitive distortion in response to the imagined consumption of perceived fattening food. The present experimental study compared the roles of these two proposed mechanisms of "feeling fat" using self-report and psychophysiological measures. Eighty-two women (41 with binge eating, 41 control participants) self-reported "feeling fat" and had their heart rate variability (HRV), a physiological index of emotion regulation, measured before and after imagined inductions. Participants imagined either a personalized negative affective experience or consuming a preferred, so-called 'fattening' food. The TSF induction increased self-reports of "feeling fat" among participants with binge eating but not among control women. The negative affect induction did not increase self-reported "feeling fat" in either group. HRV did not significantly change in response to either induction for either group. TSF may be a more potent precursor to "feeling fat" than negative affect for individuals with binge eating. This may suggest new treatment directions, such as cognitive defusion from TSF when patients experience "feeling fat." The utility of HRV in monitoring "feeling fat" is questionable.

Using the multidimensional nominal response model to model faking in questionnaire data: The importance of item desirability characteristics.

Faking in self-report personality questionnaires describes a deliberate response distortion aimed at presenting oneself in an overly favorable manner. Unless the influence of faking on item responses is taken into account, faking can harm multiple psychometric properties of a test. In the present article, we account for faking using an extension of the multidimensional nominal response model (MNRM), which is an item response theory (IRT) model that offers a flexible framework for modeling different kinds of response biases. Particularly, we investigated under which circumstances the MNRM can adequately adjust substantive trait scores and latent correlations for the influence of faking and examined the role of variation in the way item content is related to social desirability (i.e., item desirability characteristics) in facilitating the modeling of faking and counteracting its detrimental effects. Using a simulation, we found that the inclusion of a faking dimension in the model can overall improve the recovery of substantive trait person parameters and latent correlations between substantive traits, especially when the impact of faking in the data is high. Item desirability characteristics moderated the effect of modeling faking and were themselves associated with different levels of parameter recovery. In an empirical demonstration with N = 1070 test-takers, we also showed that the faking modeling approach in combination with different item desirability characteristics can prove successful in empirical questionnaire data. We end the article with a discussion of implications for psychological assessment.

In-orbit detection of the spectral smile for the Mars Mineral Spectrometer

As a payload of Tianwen-1 (TW-1), the Mars Mineral Spectrometer (MMS) is tasked with acquiring hyperspectral data of the Martian surface to detect material composition. Microdeformations in optical, mechanical, and thermal components result in the MMS experiencing spectral response distortion in orbit, leading to systematic changes in pixel central wavelengths and full width at half maximum (FWHM). Known as the spectral smile, this distortion compromises the accuracy of reflectance inversion and material composition detection. This study introduces a method for detecting the spectral smile through the Martian atmospheric absorption channel, capitalizing on the distinct characteristics of the atmospheric composition and absorption patterns of Mars. A suitable technical route for in-orbit spectral smile detection was established and tested using simulation experiments and MMS-acquired hyperspectral data. Results suggest that the proposed method can attain central wavelength shifts with a maximum error of 0.32 nm and FWHM variations with a maximum error of 1.95 nm. Employing in-orbit spectral smile detection markedly enhances the correction of Martian atmospheric absorption and provides technical support for Martian surface reflectance inversion. https://github.com/wubingnote/MMS-Spectral-Smile.

Research on vibration response distorted similitude of cylindrical shells under modal distribution disorder

Similitude theory enables local-scale models to reflect the dynamic characteristics of full-scale models and is widely employed in engineering experimentation. However, shell structures, constrained by wall thickness, cannot undergo experiments through proportional downsizing. Existing similitude studies with retained wall thickness exhibit only minimal distortion, and accurate prediction of vibration responses is hindered by modal distribution disorder. To address these challenges, a method based on modified frequency response functions of natural frequencies and mode shapes is proposed. Scaling laws for natural frequencies and mode shapes of cylindrical shells with retained wall thickness are established. This method yields a maximum prediction error of 4.29 % for prototype natural frequencies, compared to 50.57 % for existing methods. Predicted prototype vibration acceleration responses correspond well with theoretical calculations in both frequency and amplitude, while existing methods fail entirely. The phenomenon of modal distribution disorder and the effectiveness of the proposed method in mitigating it are verified by modal experiments and response tests. Research reveals that the sensitivity of different modal frequencies to the wall thickness scaling factor varies, serving as the cause of modal distribution disorder. The modal distribution with the same circumferential wave number is unaffected by wall thickness. Modes above the bending frequency, with axial half-wavelength consistent with bending modes, are prone to disorder due to wall thickness distortion. During wall thickness distortion, a mode originally with the lowest frequency is surpassed towards lower frequency by the mode with larger circumferential wave number and the same axial half-wave number, leading to disorder. The proposed method addresses the challenge of minimal distortion in structural vibration response and poor performance, advancing the development of distorted similitude.

The distortion and misinterpretation of TEM responses caused by the IP effect

Abstract Transient electromagnetic surveys are commonly conducted to map the distribution of resistivity, a key physical property in mineral exploration and other geological prospecting problems. However, the responses obtained in regions associated with chargeable minerals are always distorted by the induced polarization effects. In this study, the distorted responses are initially simulated in the frequency domain employing the Cole–Cole complex resistivity model and subsequently converted into the time domain through a time-frequency transformation method. A uniform half-space model is employed to validate the algorithm and illustrate the distortion characteristics of the responses in polarizable formations. A three-layer model is designed to estimate the misinterpretation of slightly complicated models. An actual misinterpretation is demonstrated by field responses containing induced polarization effects collected in the Wulong Gold Mine. The results show that the distortions under different geoelectrical conditions are consistent, enhancing the responses in the early stage and counteracting the responses in the late stage. The strong induced polarizable effects distort the responses by causing explicit sign reversals, whereas the weak induced polarizable effects only distort the decay rate of the responses. These distortions are prone to causing misinterpretations and resulting in excessively intricate geological structures.

Faking good and bad on self‐reports versus informant‐reports of Dark Triad personality

AbstractResearch consistently demonstrates that people can distort their responses on self‐report personality tests. Informant‐reports (where a knowledgeable informant rates a target's personality) can be used as an alternative to self‐ratings. However, there has been little research on the extent to which informants can distort their responses on personality tests (or their motives for response distortion). The current study examines the effects of experimentally induced response distortion on self‐ and informant‐reports of the Dark Triad. The participants (N = 834 undergraduates) completed Dark Triad measures in a 2 × 3 between‐person design crossing format (self‐ vs. informant‐report [imagined friend]) with instruction condition (answer honestly, look good, or look bad). “Look good” effects were significant for both self‐reports (d = −1.22 to 1.42) and informant‐reports (d = −1.35 to 0.62). “Look bad” effects were also significant for both self‐reports (d = −0.56 to 3.58) and informant‐reports (d = −0.55 to 3.70). The Five Factor Machiavellianism Inventory results were opposite to hypotheses, but Dirty Dozen Machiavellianism results were as expected. We conclude that people can distort Dark Triad scores for themselves (self‐report) and on behalf of someone else (informant‐report). We discuss the relevance of our findings for self‐ and informant‐report assessment in applied contexts.

Aeroacoustic analysis of a bass-reflex loudspeaker using LES: Validation of 2D and 3D numerical model with experiment

A bass-reflex loudspeaker has a port that amplifies low frequencies through Helmholtz resonance. However, high sound pressure levels can cause fluid flow near the port tip, leading to noise and distortion. Two-dimensional axisymmetric aeroacoustic analysis is commonly used to predict these non-linear phenomena; however, it has been reported to overestimate harmonic distortion. Presently, its accuracy has not been adequately verified through three-dimensional simulations or comparison with experimental results. This study validates the numerical model by comparing results from three- and two-dimensional analyses with experimental measurements on a straight tube port axisymmetric speaker model. In aeroacoustic analysis, large-eddy simulations are adopted, and the speaker model is acoustically driven at the Helmholtz resonance frequency. The results show that while the two-dimensional axisymmetric model overestimates the harmonic distortion and noise in the frequency response of far-field sound pressure, the three-dimensional model agrees well with the experiment up to the band where the harmonic distortion and port noise appear. This indicates that three-dimensional aeroacoustic analysis is necessary to accurately reproduce the fluid-induced distortion and noise of a bass-reflex port speaker.

Analytical Models for the Time Response of a Microstrip Line with Two Additional Symmetrical Conductors on Top under Different Boundary Conditions at Their Ends

Introduction. Protection of radio electronic equipment (REA) against various electromagnetic interferences is an important aspect of electromagnetic capability. Among interferences for REA, ultra-short pulses of picosecond and nanosecond ranges represent the highest danger due to their high voltage, short duration, and wide spectrum. One effective protection measure consists in the use of bandpass devices based on modal decomposition, such as modal filters (MF). This requires an analysis of distortion of the temporal response of bandpass devices, which is usually carried out numerically. However, even for simple configurations, this approach is associated with high computational costs. Yet simple analytical time-response models are acceptable in some cases. In the initial design stages, such models are extremely useful in providing a preliminary solution and a rapid assessment of response distortions. Therefore, comparison of time responses obtained by numerical methods and analytical models appears an important research task. Aim. To compare the time responses obtained by quasi-static analysis and analytical models. Materials and methods. Analytical models for computing time responses based on a modal analysis technique were considered. A quasi-static modeling of a microstrip line (MSL) with two additional symmetrical conductors on top in the TALGAT system was carried out. Results. Analytical models are proposed for an MSL with two additional symmetrical conductors on top taking different boundary conditions at their ends into account. The accuracy and reliability of the proposed models are verified by comparing the time responses obtained by quasi-static analysis and the proposed models. The results obtained showed good agreement. Conclusion. It is shown that an MSL with two additional symmetrical conductors on top can be used as an MF under different boundary conditions at the ends of these conductors. The proposed models allow the shape and amplitude of the response to be estimated with acceptable accuracy, reducing time and computational costs.

Social desirability, dietary intakes, and variables related to attitudes and behaviours towards eating among French-speaking adults from Quebec, Canada: The PREDISE study.

The primary objective of this study was to examine how social desirability is associated with self-reported measures of dietary intakes and variables related to attitudes and behaviours towards eating. This analysis was conducted in 1083 adults (50.0% women) from the PREDISE study. Social desirability was assessed using the Balanced Inventory of Desirable Responding (BIDR) questionnaire, which includes two subscales: (1) self-deceptive enhancement (SDE), i.e., having an overly positive self-image and (2) impression management (IM), i.e., intentional response distortion to please. BIDR total score and IM subscore were positively associated with the Canadian Healthy Eating Index (C-HEI) (ß = 0.24 and ß = 0.50; p≤0.0003), calculated using data from three self-administered 24 h food recalls. All BIDR scores were positively associated with self-determined motivation for eating regulation (0.03 ≤ ß ≤ 0.06; p<0.0001), measured by the Regulation of Eating Behavior Scale, and with the intuitive eating score (0.02 ≤ ß ≤ 0.05; p<0.0001). Also, all BIDR scores were negatively associated with hunger and disinhibition scores measured by the Three-Factor Eating Questionnaire (-0.17 ≤ ß ≤ -0.09; p<0.0001). All these associations were adjusted for age, sex, BMI, and the education level. Furthermore, controlling for both dimensions of social desirability did not impact the magnitude of the association between self-determined motivation (the strongest predictor of healthy eating in the PREDISE study) and C-HEI. According to our results, associations are observed with diet quality, as well as with attitudes and behaviours towards eating; therefore, a measurement of social desirability responding would be pertinent in studies using those or related variables.

Pathophysiology of Acute Kidney Frailty.

Acute kidney frailty is a premorbid condition of diminished renal functional reserve that predisposes to acute kidney injury; this condition results from subclinical wear or distortion of renal homeostatic responses that protect the renal excretory function. Knowledge of its pathophysiological basis is critical for the development of diagnostic and therapeutic strategies that allow for prophylactic intervention and disease prevention.

Comparison between numerical models for unbraced multiple bay pallet racks

AbstractUnbraced pallet racks are cold‐formed steel structures intended for the storage of products. They are subjected to severe lateral actions, and are particularly instability prone in the down aisle direction. Therefore, their design is compromised and needs of an accurate modelling. In current design practice, models using simplified beam formulations are regularly considered (such as Euler‐Bernoulli or Timoshenko), being them not able to reproduce torsional warping, or cross‐sectional distortion; these phenomena are accounted for indirectly via reduced sectional properties, and in the post‐process. This paper presents a comparison between three single column models, intended for the modelling of racks with a significant number of bays. Three models are presented: –Two 2D beam models using gross and equivalent section properties –A 3D beam model using equivalent section properties. Additionally, the results of these analyses are compared with those of a 3D model using shells and beams, presented in a previous research paper. Two rack configurations with different level heights are considered. The aim of this study is to capture the influence perforations of the uprights, warping, eccentricities and cross‐sectional distortion in the nonlinear response of racks subject to severe lateral actions.

Less Evaluative Measures of Personality in Job Applicant Contexts: The Effect on Socially Desirable Responding and Criterion Validity

Researchers have long sought to mitigate the detrimental effects of socially desirable responding on personality assessments in high-stakes contexts. This study investigated the effect of reducing the social desirability of personality items on response distortion and criterion validity in a job applicant context. Using a 2 × 2 repeated measures design, participants (n = 584) completed standard (International Personality Item Pool) and less evaluative (Less Evaluative Five Factor Inventory) measures of Big Five personality in a low-stakes context and then several weeks later in a simulated job applicant context. Self-report criteria with objective answers, including university grades, were also obtained. In general, the less evaluative measure showed less response distortion than the standard measure on some metrics, but not on others. Declines in criterion validity in the applicant context were smaller for the less evaluative measure. In the applicant context, however, validities were similar across the two measures. Correlations across contexts for corresponding traits (e.g., low-stakes extraversion with high-stakes extraversion) were also similar for both measures. In summary, reducing socially desirable item content might slightly reduce the substantive content required to predict criteria in low-stakes contexts, but this effect appears to be partly offset by reduced response distortion for less evaluative measures in applicant contexts.

Contributions to Constructing Forced-Choice Questionnaires Using the Thurstonian IRT Model

Forced-choice questionnaires involve presenting items in blocks and asking respondents to provide a full or partial ranking of the items within each block. To prevent involuntary or voluntary response distortions, blocks are usually formed of items that possess similar levels of desirability. Assembling forced-choice blocks is not a trivial process, because in addition to desirability, both the direction and magnitude of relationships between items and the traits being measured (i.e., factor loadings) need to be carefully considered. Based on simulations and empirical studies using item pairs, we provide recommendations on how to construct item pairs matched by desirability. When all pairs contain items keyed in the same direction, score reliability is improved by maximizing within-block loading differences. Higher reliability is obtained when even a small number of pairs consist of unequally keyed items.

“Use the Force!” Adaptation of Response Formats

Abstract. The present paper features the adaptation of an existing Big Five questionnaire with a rating scale (RS) response format into a measure using a multidimensional forced choice (MFC) response format. Rating scale response formats have been criticized for their proneness to intentional and unintentional response distortions. Multidimensional forced choice response formats were suggested as a solution to mitigate several types of response sets and response styles by design. The Big Five Inventory of Personality in Occupational Situations (B5PS) is a situation-based questionnaire designed for personnel selection and development purposes which would benefit from fake-proof response formats. MFC response formats require special effort during test construction and calibration which will be laid out here. Changing the response format has severe consequences on item design and scoring. An inherent issue with MFC formats derives from their inability to yield interpersonal comparative results from standard (sum) scoring. This issue can be solved with item response theory (IRT)-based calibration during test construction. The Thurstonian IRT approach (TIRT) was developed by Brown and Maydeu-Olivares (2011) , and aspects of MFC item design and TIRT calibrations are explored in this paper. Evidence on structural and construct validity are presented alongside recommendations on the test development processes. The results support the feasibility of the concept of MFC test construction with TIRT calibration in a contextualized and situation-based item format.

The nuclear lamina is required for proper development and nuclear shape distortion in tomato.

The nuclear lamina in plant cells is composed of plant-specific proteins, including Nuclear Matrix Constituent Proteins (NMCPs), which have been postulated to be functional analogs of lamin proteins that provide structural integrity to the organelle and helps stabilize the three-dimensional organization of the genome. Using genomic editing, we generated alleles for the three genes encoding NMCPs in cultivated tomato (Solanum lycopersicum) to determine if the consequences of perturbing the nuclear lamina in this crop species were similar or distinct from those observed in the model Arabidopsis thaliana. Loss of the sole NMCP2-class protein was lethal in tomato but is tolerated in Arabidopsis. Moreover, depletion of NMCP1-type nuclear lamina proteins leads to distinct developmental phenotypes in tomato, including leaf morphology defects and reduced root growth rate (in nmcp1b mutants), compared to cognate mutants in Arabidopsis. These findings suggest that the nuclear lamina interfaces with different developmental and signaling pathways in tomato compared to Arabidopsis. At the subcellular level, however, tomato nmcp mutants resembled their Arabidopsis counterparts in displaying smaller and more spherical nuclei in differentiated cells. This result argues that the plant nuclear lamina facilitates nuclear shape distortion in response to forces exerted on the organelle within the cell.

Personal integrity and faking in the workplace: when competition matters

Despite the fact that employee faking or intentional response distortion is a critical concern in many workplace processes, the antecedents of this behavior are poorly understood. Based on signaling theory describing faking behavior as a strategic adaptation to competitive signals, this study examines the influence of personal integrity and perceived competition on faking. An online between-subjects experiment was carried out on a sample of teachers from elementary schools in selected regions of the Czech Republic (N = 470). The experimental group was subjected to competition-inducing instructions during the administration of the Occupational Integrity Scale (OIS) and the Balanced Inventory of Desirable Responding (BIDR-CZ), as an indicator of faking (impression management). Findings provided support for the moderating role of perceived competition on the link between impression management and personal integrity. Those who scored lower in reliability and moral sense (factors of OIS) exposed to competition-inducing instructions scored significantly higher on impression management than respondents in the control group, supporting the critical role of competition manipulation against excessive score inflation. Findings suggested that if organizations are not sure of the level of integrity of employees, they should not utilize competitive cues since individuals with low integrity tend to fake their responses to increase the person-organization fit. The managerial implications of these findings were discussed.

Sequential Experiment Design Method Based on Uniformity and Distortion of Responses

Sequential Experiment Design Method Based on Uniformity and Distortion of Responses

Use of ultrasound elastography in differentiating benign from malignant thyroid nodules: a prospective study.

Elastography is a real-time non-invasive ultrasonography modality wherein the tissue stiffness is evaluated by calculating the degree of tissue distortion in response to an external force. This study was undertaken to assess the diagnostic value of elastography in differentiating benign from malignant thyroid nodules. In this prospective comparative study, a total of 52 thyroid nodules from 44 euthyroid patients undergoing fine needle aspiration cytology were assessed. Elastography was performed by a single experienced sonologist, wherein the nodules were graded as per elastography scoring (ES), and the strain ratio (SR) for each nodule was computed. Final histopathology findings of the patients undergoing surgery were compared to elastography findings, and measures of diagnostic accuracy to differentiate between benign and malignant nodules were determined for ES and SR. Thirty (68.2%) females and 14 (31.8%) males, with a mean age of 45.18 ± 11.23years, were assessed. Fourteen (31.8%) patients underwent thyroidectomy, and histopathology was reported for 18 (34.6%) nodules. In all, nine (17.3%) nodules were malignant, and 43 (82.7%) nodules were considered benign. ES demonstrated a sensitivity of 88.9%, specificity of 88.3%, PPV of 61.5%, NPV of 97.4%, and accuracy of 88.5% to identify benign thyroid nodules. The mean SR for benign nodules was significantly lower as compared to malignant nodules (2.72 ± 0.62 vs. 4.52 ± 0.75, P < 0.0001). The optimal cut-point value for SR to differentiate benign and malignant thyroid nodules was determined to be 3.8, with the sensitivity, specificity, PPV, NPV, and accuracy being 88.9%, 95.4%, 80%, 94.6%, and 94.2%, respectively. Ultrasound elastography (ES and SR) demonstrated good diagnostic efficacy to differentiate benign thyroid nodules from the malignant ones, and can be a good supplementary tool to gray-scale ultrasonography. It can also help in reducing the rates of unnecessary fine needle-aspiration biopsy.