Malunion Of Distal Radius Fracture Research Articles

Association between distal radius fracture malunion and patient-reported disability: a systematic review and meta-analysis.

To assess whether distal radius fracture (DRF) malunion is associated with greater patient-reported disability. We searched PubMed, EMBASE, and Cochrane databases up to 21 May 2023. Two reviewers independently screened retrieved titles/abstracts and assessed the full text of potentially eligible articles to identify cohort studies and randomized controlled trials reporting outcomes of DRF in adults at least 12 months after fracture, confirmed radiologically 3 months or longer after fracture. We excluded studies not reporting patient-reported outcomes according to malunion and studies judged to have a high risk of bias, as assessed independently by two reviewers using the Quality In Prognosis Studies tool. To express the overall effect of malunion on patient-reported disability, we calculated the standardized mean difference (SMD) with a 95% CI. Six studies with 898 patients (77% women) were included; five involved adults of all ages, and one restricted to patients aged 65 years and older. In the meta-analysis including the five studies with adults of all ages (1047 observations), the SMD was 0.58 (95% CI: 0.42-0.74; P < 0.001), favoring no malunion, with no statistically significant heterogeneity or publication bias. In the meta-analysis including all six studies (1193 observations), the SMD was 0.51 (95% CI: 0.35-0.67; P < 0.001), favoring no malunion, with moderate but significant heterogeneity. Malunion of distal radius fracture is associated with significantly greater patient-reported disability with a moderate magnitude in terms of clinical importance. The study does not address the possible influence of age or treatment methods.

Outcomes after radioscapholunate arthrodesis for intra-articular malunion of distal radius fractures

PurposeTo study the clinical, radiological, and functional outcomes after of radioscapholunate (RSL) fusion for intra-articular malunion of the distal radius.MethodsThis retrospective study included 26 patients (17 males and 9 females) with intra-articular malunion of distal radius fractures who underwent RSL arthrodesis using locked miniplates (without distal scaphoid excision) between 2012 and 2020. Their mean age was 43 years (range, 32–56). Patients were assessed radiographically for union and clinically for range of motion, grip strength, and pain (assessed by Visual Analogue Scale (VAS) for pain). Functional evaluation was performed by using the Mayo modified wrist score (MMWS) and the Disabilities for the Arm, Shoulder, and Hand (DASH) questionnaire.ResultsAll patients showed complete healing at the fusion site after a mean of 8.7 weeks (range, 8–12). The mean follow-up period was 72 months (range, 60–84). The pinch strength improved from a mean of 6.2 kg (range, 3–12) to a mean of 9.8 kg (range, 5–18) which represents 80% of the contralateral side. The mean pinch strength was 7 kg (range, 5–18) which presents 80% of the other side. VAS for pain showed a mean improvement of 72.6%. The DASH score improved to a mean of 19.2 (range, 14–24). The MMWS improved to a mean of 68 (range, 45–86). At the final follow-up period, no degenerative changes were detected in the midcarpal joint.ConclusionRSL arthrodesis (using locked miniplates without distal scaphoid excision) is a reliable surgical procedure to manage cases of radiocarpal OA after intra-articular malunion of distal radius fractures with good clinical and radiological outcomes.Level of evidenceLevel IV- therapeutic.

Nascent Malunion of Distal Radius Fractures Treated with Fixed Angled Volar Plates without Using Bone Grafts.

Malunion of the distal radius is a common complication. Using bone grafts is common to restore the bone to an acceptable level. This study aimed to verify if it is necessary to use bone grafts in nascent malunion of distal radius fractures treated with fixed angled volar plates and which radiographic parameters are essential to obtain satisfactory outcomes. This single-centered prospective study included 11 patients who underwent corrective osteotomy of the radius for malunion. Patients with a metaphyseal, extraarticular osteotomy stabilized by a volar fixed angle plate within 3months after the fracture are included. Patients underwent a standard radiological evaluation at postoperative 1month, 3months, 6months, 1year, and annually thereafter. Radial inclination, radial height, ulnar variance, and palmar tilt were measured. Wrist ranges of motion are measured throughout follow-up with a goniometer. Grip strength is measured using a Jamar Hand Dynamometer. The function is evaluated via the Gartland-Werley (GW) score and the Disabilities of the Arm, Shoulder, and Hand (DASH) score. The mean age of 11 patients, 9 (81.82%) males, included in the study was 41.45 ± 14.89years. The mean post-fracture admission time is 39.3 ± 15.1days. Radial inclination, radial length, and ulnar variance improved significantly after surgery (p = 0.0023, 0.0002, 0.0037). Radial inclination values are within normal limits for all patients at admission. The radial length was in the normal range for 72.73%, the ulnar variance was in the normal range for 72.73%, and palmar tilt was in the normal range for 100% of the patients. Extension 54.55%, flexion 72.73%, radial deviation 81.82%, ulnar deviation 63.64%, pronation 90.91%, and supination 72.73% were achieved after surgery. GW average was 3.09 ± 3.24 DASH score average was 12.24 ± 13.48. The mean grip strength was 29.27 ± 7.21 on the operated side, while it was 34.91 ± 5.32, on the healthy side, with a significant difference (p = 0.0108). It is possible to get good results without using bone grafts in corrective osteotomy of distal radius malunions.

Surgical Management of Acute on Chronic Distal Radius Fractures: Correcting Malunion Deformities Through the Secondary Fracture Plane.

It is challenging to restore the clinically acceptable alignment of the distal radius after an acute on chronic fracture or after a secondary fracture occurring after malunion of a primary distal radius fracture. In cases of insignificant primary deformity, restoration to the primary deformity may suffice to obtain a successful clinical result. A borderline acceptable primary radial deformity can be unacceptable after the second injury, resulting in functional disability. If surgery is indicated, the surgeon must contend with both primary and secondary deformities to restore proper distal radius anatomy. We present our technique to correct both primary and secondary distal radius deformities through the new or secondary fracture plane.

Open reduction through original fracture line and fixation with locking plate is a feasible approach for extra-articular distal radius fracture malunion.

This study aims to investigate the effectiveness of open reduction through original fracture line and fixation with locking plate in treatment of extra-articular distal radius fracture (DRF) malunion. Between January 2015 and December 2018, a total of 69 patients (27 males, 42 females; mean age: 62.0±8.9 years; range, 46 to 70 years) suffering from symptomatic extra-articular DRF malunion were included. All patients were followed for more than six months. Patient's demographics, hand dominance, data including Quick Disabilities of the Arm, Shoulder and Hand (QuickDASH) questionnaire, pain on a Visual Analog Scale (VAS) score, radius height, ulnar variance, wrist range of motion, volar tilt and radial inclination before and after surgery were analyzed. The median follow-up was 14.13 months, and the median time to fracture healing after the operation was 14.25 weeks. The mean QuickDASH score and VAS score were significantly reduced from 63.4±13.97 and 4.6±1.23 preoperatively to 7.8±4.67 and 1.3±0.76 at the final follow-up, respectively. Radius height, ulnar variance, volar tilt, radial inclination and wrist range of motion (flexion, extension, pronation, supination) were all significantly improved (p<0.001). Images showed good radius height, ulnar variance, volar tilt and radial inclination. The range of motion of wrist and forearm were improved substantially. Among 69 patients, two patients received allograft due to osteoporotic bone collapse. No serious complication was developed, except for minor pain in three patients during follow-up. Open reduction through original fracture line and fixation with locking plate is a feasible and effective treatment for selective DRF malunion.

Corrective Osteotomy with Volar and Dorsal Fixation for Malunion of Intra-Articular Fracture of the Distal Radius: A Retrospective Study.

ObjectivesAlthough corrective osteotomy with volar or dorsal plate fixation can treat malunion of distal radius fractures, each has its own disadvantages. Little is currently known on whether dorsal fixation combined with volar fixation may further improve recovery. This study aimed to evaluate the clinical value of corrective osteotomy combined with volar and dorsal plate fixation in patients with malunion of intra‐articular fractures of the distal radius.MethodsSeventeen patients with malunion of intra‐articular fractures of the distal radius treated with corrective osteotomy with volar and dorsal plate fixation from 1 January 2016 to 31 November 2018 were retrospectively analyzed. The enrolled patients included seven males and 10 females with an average age of 54.9 years (range: 36–70 years). The radiographic parameters, including the radial length, the radial inclination angle, the ulnar variance, and the volar tilt, as well as clinical outcomes, including wrist and forearm range of motion (ROM), grip strength, the Mayo Modified Wrist Score (MMWS), and the disabilities of the Arm, Shoulder, and Hand (DASH) score, were examined at 3 months and 18 months after operation and compared with the preoperative state. The paired t‐test was used for statistical analysis.ResultsAfter corrective osteotomy combined with volar and dorsal plate fixation, all included patients were followed up for 18 months, and there was no surgical site infection. Patients reported postoperative pain due to the irritation of extensor tendon (two cases) and wrist arthritis (two cases). The radial length increased from 1.34 ± 2.34 mm to 9.25 ± 2.65 mm and 9.03 ± 2.47 mm at 3 months and 18 months postoperatively (t = 8.257, 7.954, all p < 0.05). The radial inclination angle increased from 6.45° ± 0.76° to 19.35° ± 3.43° and 19.03° ± 3.63° at 3 and 18 months (t = 12.517, 12.122, all p < 0.05). The ulnar variance decreased from 5.11 ± 0.23 mm to 1.32 ± 0.31 mm and 1.54 ± 0.62 mm at 3 and 18 months (t = 4.214, 4.895, all p < 0.05). The volar tilt was corrected from 4.47° ± 3.46° to 15.51° ± 2.72° and 14.12° ± 2.41°, respectively (t = 11.247, 10.432, all p < 0.05). Moreover, wrist ROM increased from 42.53° ± 8.99° to 98.70° ± 7.61° and 101.24° ± 7.66° (t = 41.433, 46.627, all p < 0.05), while forearm ROM was increased from 94.82° ± 6.54° to 134.47° ± 5.06° and 137.24° ± 5.52°, respectively (t = 31.507, 32.584, all p < 0.05). Similarly, grip strength, MMWS, and DASH were also remarkably improved. There were no significant differences in the wrist and forearm ROM, grip strength, MMWS, and DASH scores between follow‐up at 3 and 18 months (all p > 0.05).ConclusionsCorrective osteotomy with volar and dorsal fixation can improve recovery of volar tilt, relieve wrist pain, restore wrist and forearm function, and increase grip strength of patients with malunion of intra‐articular fractures of the distal radius.

Comparing radial lengthening osteotomy with ulnar shortening osteotomy to treat ulnar impaction syndrome after distal radius fracture malunion.

Distal radius mal-unions often cause radius shortening and ulnar impaction syndrome. The modern treatments of ulnar impaction syndrome following distal radius mal-union are ulnar shortening osteotomy (USO) and distal radius lengthening osteotomy (DRLO). However, there are few studies to compare long-term outcomes of these two treatments. This study compares isolated USO to DRLO for the treatment of ulnar impaction syndrome following distal radius mal-union. We retrospectively reviewed 68 patients with extra-articular distal radius mal-unions treated by isolated USO in 36 patients and DRLO in 32 patients. Pain visual analog scale (VAS), wrist motion, grip strength, radiographic parameters including sigmoid inclination, DASH score, and perioperative complications were analyzed. Mean follow-up was 62.6months. The postoperative VAS scores for pain on exertion were less in the DRLO group than the USO group (1.2 vs. 2.8, p = 0.02). The DASH scores were 16.7 and 29.8 in the DRLO and USO groups, respectively (p = 0.02). The reduction of pain and improvement of function showed significantly better in the DRLO group. The mean operative time was shorter in the USO group. Most of the sigmoid inclinations were changed in DRLO. There were two re-operations following USO for painful nonunion and two patients had subsequent DRUJ osteoarthritis at the last follow-up. Although both treatments improved range of motion, grip strength, and VAS for pain, DRLO was found in better reduction of pain and improvement of function. USO is a simpler procedure with a shorter operative time but it has an increased potential to cause subsequent osteoarthritis of the DRUJ as its incongruity of DRUJ after USO especially in reverted inclination. DRLO can be a preferred method for treating USWP in relevant distal radial mal-union.

The malunion of distal radius fracture: Corrective osteotomy through planning with prototyping in 3D printing

Introduction: Distal radius fractures (DRF) are among the most frequent in the body. About one third of these fractures can result in malunion with restriction of movement and pain in the wrist, the treatment in these cases consists of corrective osteotomy of the deformity. Due to its three-dimensional (3D) complexity, careful preoperative planning is a fundamental step in correction. The prototyping from the 3D reconstruction of the computed tomography of the affected wrist, allows the real understanding of the deformity.Methods: Patients with malunion of the distal radius with indication for surgical treatment, from December 2019, were included in the group of corrective osteotomies through planning with prototyping in 3D printing. The postoperative functional outcome was assessed by the Disabilities of the Arm, Shoulder and Hand Score (DASH) and visual analogue scale (VAS). Radiographic data including radial inclination, volar tilt and joint step were recorded from standard posteroanterior and lateral radiographic views.Results: A total of 9 patients were included. The mean age was 47 years. The average postoperative DASH value of the patients was 24.9 and VAS was 3.6. Radiographically, the palmar tilt had an average improvement of 25.22°, and the radial inclination had an average improvement of 2°.Conclusion: Corrective osteotomy through planning with prototyping in 3D printing is an effective method of treating symptomatic distal radius malunions. The possibility of performing the osteotomy in a 3D model, simulating the surgery, making the procedure more predictable.

Study of use of sauve- kapandji procedure in treating malunion of distal radius fractures

Malunion is a common delayed complication of distal radial fracture, if acceptable anatomic realignment of the distal end of radius has not been achieved during closed reduction. This leads to persistent radial shortening which leads to incongruency of the D.R.U.J., and positive ulnar variance. Dysfunction of the distal radioulnar joint leads to impaired function of the wrist joint. Various surgical techniques have been developed to treat instability of the DRUJ, including distal ulna resection, partial-resection with interposition arthroplasty, and the Sauve-Kapandji procedure. Methodology: In this study twenty patients with DRUJ dysfunction with impaired rotation of forearm due to malunion of distal radius fracture with positive ulnar variance were selected. Although the patients had complete union of the fracture, they were still having pain and functional limitations 5-12 months after fracture union. They were operated using the Sauve Kapandji procedure under aseptic precautions and adequate postop care was given along with physiotherapy. We studied 20 wrists in 20 patients (15 men and 5 women), with a mean age of 45 years (range, 28 to 65 years) at the time of the operation. The mean duration of follow-up was 12 months. We studied 7 cases of left and right side in 13 cases. At the final follow-up, out of 20 patients, 15 had excellent score, 3 had good score, 2 had fair score) In all patients the pseudoarthrosis gap of the ulna was well preserved and that the stability of the proximal ulnar stump also was preserved. Conclusion: Distal radius fractures(DRF) are very common in orthopedic practice and are often accompanied by instability of the distal radio ulnar joint (DRUJ). Before the era of operative surgery closed reduction with splinting was the treatment of choice. Now a variety of treatment options are available ; closed reduction with percutaneous pinning, open reduction internal fixation with plates and screws and external fixation. Although many procedur

Ulnar Nerve Neuropathy after Distal Radius Fracture Malunion. Uncommon Intra-Operative Findings and a Review of the Literature

Distal radius fractures are among the most common fractures. Though associated neurologic problems are not uncommon, ulnar nerve dysfunction is a rare complication. An interesting case of sensory impairment of the ulnar nerve in a female patient with distal radius malunion, 6 months after a conservatively treated fracture, in which surgical intervention revealed an anatomic variation of ulnar nerve route, is presented in conjunction with a review of relevant literature.

Intra-articular corrective osteotomy for intra-articular malunion of distal radius fracture using three-dimensional surgical computer simulation and patient-matched instrument

BackgroundCorrective osteotomy of malunited intra-articular distal radius fracture is challenging. In this study, we investigated the results in patients with malunited intra-articular distal radius fracture who underwent intra-articular corrective osteotomy through an extra-articular approach using three-dimensional (3-D) computer simulation and a patient-matched instrument (PMI). MethodsWe retrospectively studied five consecutive patients with symptomatic malunited intra-articular distal radius fracture who underwent corrective osteotomy using a PMI. The maximal step-off on computed tomography and the deformity angle on plain radiographs were evaluated. The clinical examination parameters included range of motion (ROM), grip strength, pain according to visual analog scale (VAS), and Patient-Rated Wrist Evaluation (PRWE) score. ResultsThe maximal step-off was significantly reduced from 4.9 ± 1.8 to 1.0 ± 0.2 mm (p = 0.008). The absolute differences between the affected side and the normal contralateral side in radial inclination were significantly reduced from 5.4° ± 3.4°–1.2° ± 1.1° (p = 0.043). These differences were not significantly reduced postoperatively in the volar tilt and ulnar variance. VAS was significantly reduced from 4.1 ± 1.6 to 0.9 ± 0.7 cm (p = 0.006). The PRWE score significantly improved from 41.6 ± 22.0 to 15.7 ± 19.5 (p = 0.043). Grip strength was significantly increased from 54.0% ± 14.8%–85.8% ± 18.8% (p = 0.003). The preoperative and postoperative total arc of the wrist and forearm ROM were not significantly different. ConclusionsIntra-articular corrective osteotomy using PMI could be one of the reliable treatment options for intra-articular malunion. PMI has exceptionally high precision performance, and it is also anticipated to yield superior surgical results.

Extra-articular Corrective Osteotomy With Bone Grafting to Achieve Lengthening and Regain Alignment for Distal Radius Fracture Malunion.

Surgical correction of the distal radius fracture malunion is challenging because of the 3-dimensional deformity. We propose a method by using the Kapandji intrafocal pinning in corrective osteotomy for treatment of the distal radius fracture malunion to facilitate the alignment correction while using the bone graft to restore the radial length. The surgery was started with the osteotomy from a volar approach, and the osteotomy gap was expanded gradually. Then, allobone grafting was performed to maintain the corrected radial length. We used the Kapandji intrafocal pinning dorsally to provide dorsal supporting force and radially to correct the radial inclination. Finally, a volar plate was used to buttress and push the distal fragment to fit as to regain the correct volar tilt. We enrolled 10 patients of distal radius fracture malunion with a mean age of 59.3 years. All patients had bone healing within 3 months after surgery. The mean lengthened distance was 5 mm. The radial inclination and volar tilt could be corrected with improved functional results.

Long-term outcomes of corrective osteotomy for malunited fractures of the distal radius

The aim was to investigate the long-term outcome after corrective osteotomy for malunion of distal radius fractures. Radiological findings, function, activity performance, pain, health-related quality of life and self-efficacy were studied. Evaluation of 37 patients 3–10 years after osteotomy fixated with a volar plate. Conventional radiographs were taken. Grip strength and range of motion were evaluated. Scores from the Patient Rated Wrist Evaluation (PRWE) were compared with normative values. The RAND-36 was used for evaluation of health-related quality of life and the General Self-Efficacy scale (S-GSE) for self-efficacy. Radial height, volar tilt, and ulnar variance improved postoperatively. In the long term, the corrections were maintained. Radiographs showed significantly more advanced osteoarthritis. Mean grip strength was 31 kg (SD 13) 89%, and range of motion varied between 80% and 95% compared to the uninjured side. The median PRWE was 12 points (0–99). The study group experienced higher levels of pain than reference values. There was a moderate correlation between the PRWE and volar tilt (rs = 0.453, p = .006) and grip strength (rs = 0.40, p = .014). At long-term follow-up functional outcome after a corrective osteotomy is generally good, but patients may experience some degree of pain. Corrective osteotomy might be considered for patients with a poor functional outcome after a distal radius fracture.

Complications of Corrective Osteotomies for Extra-Articular Distal Radius Malunion

Osteotomy of the distal radius for a fracture malunion is a challenging procedure. The purpose of this study was to review a series of osteotomies to determine the type and risk of complications. A retrospective cohort study was performed, including all Kaiser Permanente Southern California patients who were aged 18 years or older between January 1, 2007, and September 25, 2015, and underwent osteotomy for an extra-articular distal radius fracture malunion. Charts were reviewed for demographic data, comorbidities, osteotomy type (hinged vs distraction), implant, and bone graft type. Complications including infection, nonunion, loss of reduction, implant failure, nerve injury, tendon injury, and complex regional pain syndrome were recorded. There were 60 patients who underwent extra-articular osteotomy of the distal radius for malunion during the study period. The mean age was 54 years (range, 21-83 years). There were 24 distraction-type (intervening bone graft) and 36 hinge-type (volar cortical contact maintained) osteotomies. Twenty-five of 60 patients had complications related to the procedure requiring 13 subsequent procedures. There were 7 nonunions and 3 cases of delayed healing at the osteotomy site. One extensor carpi radialis longus tendon laceration resulted from the use of an osteotome. There were 3 delayed extensor pollicis longus (EPL) tendon ruptures after surgery. The distraction-type osteotomy was associated with a greater risk of major complications including nonunion and delayed union. A complication rate of nearly 50% was observed in distal radius osteotomies. Surgeons should be aware of the risk of injury to, or delayed rupture of the EPL tendon associated with these procedures. The risk of nonunion or delayed union is higher in distraction-type compared with hinge-type osteotomies. Low surgeon volume with this procedure may be a contributing factor to the high rate of complications. Therapeutic IV.

Solitary ulnar shortening osteotomy for malunion of distal radius fractures: experience of a centre in the UK and review of the literature.

Isolated ulnar shortening osteotomies can be used to treat ulnocarpal abutment secondary to radial shortening following distal radius fractures. Given the increase of fragility distal radius fractures awareness of treating the sequelae of distal radius fractures is important. We present the largest reported case series in the UK of ulnar shortening osteotomies for this indication. Twenty patients with previous distal radial fractures were included, who presented with wrist pain and radiologically evident positive ulnar variance secondary to malunion of the distal radius with no significant intercalated instability. Patients were treated with a short oblique ulnar shortening osteotomy, using a Stanley jig and small AO compression plate system. Pre- and postoperative radiographical measurements of inclination, dorsal/volar angulation and ulnar variance were made. Patients were scored pre- and postoperatively using the Quick Disabilities of the Arm, Shoulder and Hand (QuickDASH) and Patient-Rated Wrist Evaluation scores by two orthopaedic surgeons. Mean follow-up was 24 months after surgery. Radiographical analysis revealed a change in the ulnar variance with an average reduction of 5.74 mm. Mean preoperative scores were 61.1 (range 25-95.5) for QuickDASH and 70.4 (range 33-92) for Patient-Rated Wrist Evaluation. At the latest follow-up, mean postoperative QuickDASH scores were 10.6 (range 0-43.2) and 17.2 (range 0-44) for Patient-Rated Wrist Evaluation. Differences in scores after surgery for both QuickDASH and Patient-Rated Wrist Evaluation were statistically significant (P < 0.01). The ulnar shortening osteotomy is a relatively simple procedure compared with corrective radial osteotomy, with a lower complication profile. In our series, patients showed significant improvement in pain and function by correcting the ulnar variance thus preventing ulna-carpal impaction.

Corrective osteotomy for intra-articular malunion of the intra-articular distal radius fracture due to reduction failure during initial operation: A case report

Corrective osteotomy for intra-articular malunion of the intra-articular distal radius fracture due to reduction failure during initial operation: A case report

Combined radius addition osteotomy and ulnar shortening to correct extra-articular distal radius fracture malunion with severe radial deviation and ulnar plus.

Malunion can occur in 11 to 28% of Distal Radius Fractures and can result in radius shortening and ulnar plus with wrist deviation, pain and disability. We aimed to report particular cases of extra-articular distal radius fracture malunion with severe radial deviation and ulnar plus treated by corrective osteotomy of distal radius with bone graft associated to ulnar procedure. One of these patients was firstly operated with ulna subtraction osteotomy synthesized with plate and in a second stage with distal radius corrective addition osteotomy with homologous bone graft, plate and external fixator. Two other cases were treated in a single-step byradius addition osteotomy and caput ulnae Darrach resection. These three patients were followed-up from 2 to 12 years, successfully observing the maintenance of anatomical correction and recovery of ROM and strength with good pain relief and return to daily activities. After Darrach procedure external-fixation wasn’t needed and pronation-supination was better. Darrach procedure can solve ulna plus and improve ROM in pronation-supination with a quicker healing, avoiding the risk of ulnar non-union. Darrach’s procedure associated to addition corrective osteotomy of distal radius can be a valid treatment for distal radius severe malunion, in patients with low-moderate functional demand. In conclusion, the surgeon should choose the right corrective treatment after the complete evaluation of the patient and his functional needs. (www.actabiomedica.it)

Delayed Rupture of Flexor Tendons due to a Malunion of Distal Radius Fracture

Delayed Rupture of Flexor Tendons due to a Malunion of Distal Radius Fracture

Biomechanical study on ulnar shortening osteotomy for treatment of distal radius fracture malunion

Objective To investigate the effect on distal radioulnar joint (DRUJ) stability of ulnar shortening osteotomy for treatment of distal radius fracture malunion. Methods The model of distal radius fracture(AO type 23C1.2) malunion with radial shortening was created on 10 fresh adult upper limb cadaver specimens. The distal radius fracture was fixed with volar locking plate, and the oblique step ulnar shortening osteotomy was made. The changes of maximum pronation and supination torques from no internal fixation, Kirschner wires fixation and locking plate fixation for ulnar shorting osteotomy were compared. Results The maximum pronation and supination torques were (1.59±1.03) N•m and (1.85±1.21) N•m in the control model, (1.44±0.93) N•m and (1.63±1.18) N•m in the distal radius fracture model, (1.22±0.83) N•m and (1.20±0.83) N•m in the only ulnar shortening osteotomy model, (1.24± 0.78) N•m and (1.30±0.87) N•m in Kirschner wires fixation model, (1.37±0.85) N•m and (1.71±1.44) N•m in locking plate fixation model. Compared with the only ulnar shortening osteotomy model, there were no differences in the maximum pronation and supination torques of the Kirschner wires fixation model, while there were significant differences in that of the locking plate model fixation. There were significant differences in the maximum pronation torque and no differences in the maximum supination torque between the Kirschner wires and the locking plate fixation models. Conclusion The oblique step ulnar shortening osteotomy, similar to tenon-mortise structure, with no internal fixation or just percutaneous Kirschner wires fixation combined with external immobilization to control wrist rotation, is an effective method for treatment of ulnar-sided wrist pain caused by malunited distal radial fractures. Key words: Radius fractures; Biomechanics; Ulnar shortening osteotomy; Distal radioulnar joint

Distal radius fracture malunion: Importance of managing injuries of the distal radio-ulnar joint

BackgroundDistal radius malunion is a major complication of distal radius fractures, reported in 0 to 33% of cases. Corrective osteotomy to restore normal anatomy usually provides improved function and significant pain relief. We report the outcomes in a case-series with special attention to the potential influence of the initial management. Material and methodsThis single-centre retrospective study included 12 patients with a mean age of 35years (range, 14–60years) who were managed by different surgeons. There were 8 extra-articular fractures, including 3 with volar angulation, 2 anterior marginal fractures, and 2 intra-articular T-shaped fractures; the dominant side was involved in 7/12 patients. Initial fracture management was with an anterior plate in 2 patients, Kapandji intra-focal pinning in 5 patients, plate and pin fixation in 2 patients, and non-operative reduction in 3 patients. The malunion was anterior in 10 patients, including 2 with intra-articular malunion, and posterior in 2 patients. Corrective osteotomy of the radius was performed in all 12 patients between 2005 and 2012. In 11/12 patients, mean time from fracture to osteotomy was 168days (range, 45–180days). The defect was filled using an iliac bone graft in 7 patients and a bone substitute in 4 patients. No procedures on the distal radio-ulnar joint were performed. ResultsAll 12 patients were evaluated 24months after the corrective osteotomy. They showed gains in ranges not only of flexion/extension, but also of pronation/supination. All patients reported improved wrist function. The flexion/extension arc increased by 40° (+21° of flexion and +19° of extension) and the pronation/supination arc by 46° (+13° of pronation and +15° of supination). Mean visual analogue scale score for pain was 1.7 (range, 0–3). Complications recorded within 2years after corrective osteotomy were complex regional pain syndrome type I (n=1), radio-carpal osteoarthritis (n=3), and restricted supination due to incongruity of the distal radio-ulnar joint surfaces (n=3). This last abnormality should therefore receive careful attention during the management of distal radius malunion. DiscussionIn our case-series study, 3 (25%) patients required revision surgery for persistent loss of supination. The main error in these patients was failure to perform a complementary procedure on the distal radio-ulnar joint despite postoperative joint incongruity. This finding and data from a literature review warrant a high level of awareness that distal radio-ulnar joint congruity governs the outcome of corrective osteotomy for distal radius malunion.