Dissociation Pathways Research Articles

Semiclassical Transition State Theory (SCTST) Rate Coefficients for the Unimolecular Decomposition of the Ethoxy (CH3CH2O) Radical.

The thermal unimolecular decay of ethoxy is important in high-temperature combustion environments where the ethoxy radical is a key reactive intermediate. Two dissociation pathways of ethoxy, including the β-C-C scission to yield CH3 + CH2O and the H-elimination to make H + CH3CHO, were characterized using a high-level coupled-cluster-based composite quantum chemical method (mHEAT-345(QΛ)). The former route is found to be dominant while the latter is insignificant, in agreement with previous experimental and theoretical studies. Thermal rate coefficients are calculated for P = 0.001-658 atm (of air) and T = 300-2500 K using semiclassical transition state theory (SCTST) in combination with a pragmatic two-dimensional E,J-resolved master equation (2DME). The effects of tunneling and anharmonicity on the calculated rate constants are also examined. The tunneling factor is found to be inversely dependent on pressure, contrary to previous observations of pressure-dependent tunneling in entrance channels.

Generation of Surface Ga-H Hydride and Reactivity toward CO2.

Hydrogen adsorption on gallium oxide was investigated by in situ infrared (IR) spectroscopy over a temperature range of 30-450 °C. Both hydroxyl groups and Ga-H hydrides with a pair of characteristic bands at 3685 (3532) cm-1 and 2011 (1988) cm-1 were detected on the surface gallium oxide. The formation and stability of surface Ga-H hydrides were found to be highly dependent on the temperature of H2 dissociation. Through a combination of density functional theory (DFT) calculations and isotopic experiments, a mechanism involving both heterolytic and homolytic pathways for hydrogen dissociation was proposed for the generation of Ga-H hydrides. Furthermore, the reactivity of surface Ga-H hydrides was explored by their interactions with various probe molecules such as carbon dioxide, oxygen, and nitrogen. A potential reaction mechanism involving the attraction between nucleophilic hydrogen and positively charged intermediates was suggested during those hydrogenations.

Dissociation Without Detonation: A DFT Analysis of the Thermally Induced Fragmentation of Binary Sulfur-Nitrogen Rings and Cages.

Potential thermal dissociation pathways available to binary sulfur nitrides have been explored by density functional theory methods, and the results interpreted in terms of their known thermochemical behavior. The cyclic cation/anion pair S3N3± both undergo concerted (4 + 2) cycloreversions to afford the 3-membered thiadiazirine ring c-NSN and, respectively, the SNS± cation/anions. A similar pathway has been identified for S4N2, leading to S3 and c-NSN. More complex multistep routes for the elimination of c-NSN have been identified for the bicyclic cation/anion pair S4N5±, as well as for the neutral cage structures S4N4 and S5N6. For the S4N5+ cation a transition state for competing skeletal scrambling via a 1,3-nitrogen σ-bond shift has been located. For the multiply charged cations S3N22+ and S4N42+, dissociation mechanisms are driven by charge repulsion effects, affording SNS+/SN+ and S3N3+/SN+ respectively. Channels leading to loss of NS+ from the cyclic cation species S4N3+ and S5N5+ have also been examined, and the possible role of open-chain and cyclic S3N2-based intermediates in the formation of S2N2 during the thermal cracking of S4N4 over silver wool is explored.

Decomposition and Growth Pathways for Ammonium Nitrate Clusters and Nanoparticles.

Understanding the formation and decomposition mechanisms of aerosolized ammonium nitrate species will lead to improvements in modeling the thermodynamics and kinetics of aerosol haze formation. Studying the sputtered mass spectra of cation and anion ammonium nitrate clusters can provide insights as to which growth and evaporation pathways are favored in the earliest stages of nucleation and thereby guide the development and use of accurate models for intermolecular forces for these systems. Simulated annealing Monte Carlo optimization followed by density functional theory optimizations can be used reliably to predict minimum-energy structures and interaction energies for the cation and anion clusters observed in mass spectra as well as for neutral nanoparticles. A combination of translational and rotational mag-walking and sawtooth simulated annealing methods was used to find optimum structures of the various heterogeneous clusters identifiable in the mass spectra. Following these optimizations with ωB97X-D3 density functional theory calculations made it possible to rationalize the pattern of peaks in the mass spectra through computation of the binding energies of clusters involved in various growth and dissociation pathways. Testing these calculations against CCSD(T) and MP2 predictions of the structures and binding energies for small clusters demonstrates the accuracy of the chosen model chemistry. For the first time, the peaks corresponding with all detectable species in both the positive and negative ion mass spectra of ammonium nitrate are identified with their corresponding structures. Thermodynamic control of particle growth and decomposition of ions due to loss of ammonia or nitric acid molecules is indicated. Structures and interaction energies for larger (NH4NO3)n nanoparticles are also presented, including the prediction of new particle morphologies with trigonal pyramidal character.

Self-Inhibition Phenomena in Cu3Pt Oxidation by CO2.

This study investigates the oxidation behavior of Cu3Pt(100) in CO2 using a combination of ambient-pressure X-ray photoelectron spectroscopy, mass spectroscopy, and density functional theory modeling. Our in situ measurements reveal the simultaneous oxidation and reduction of Cu2O due to the opposing effects of atomic oxygen and CO generated from dissociative CO2 adsorption, leading to a dynamic equilibrium state of simultaneously occurring redox reactions. Complementary atomistic calculations elucidate the inhibitory effects of subsurface Pt enrichment and the counteracting roles of CO2 and CO in surface oxidation and reduction. These results provide mechanistic insights into the dissociative pathway of CO2 molecules and dynamic evolution of surface composition and reactivity of Cu-based alloy catalysts in CO2-rich environments, with broader implications for tuning gas-surface reactions by manipulating gas reactants or solid surface composition.

Mild and rapid construction of Ti electrodes for efficient and corrosion-resistant oxidative catalysis at industrial-grade intensity

The development of cost-effective and corrosion-resistant catalytic electrodes for chlorine/oxygen evolution reaction (CER/OER) in large-scale industrial applications is a significant challenge. Herein, the sol–gel method is employed to achieve a uniform coating of ruthenium (Ru) doping copper (Cu) on titanium sheet (Ru + 20 %Cu@Ti), and the highly efficient industrial grade stable Ti dimensional stable anode can be quickly constructed at 723.15 K for 2 h. Cu doping reduces the vacancy formation energy of surface oxygen, promotes additional lattice oxygen vacancy assisted hydrolysis dissociation pathway, improves the selectivity and specific activity of CER at high concentration doping, and reduces the binding energy of OER intermediates (e.g., *OH, *O, and *OOH) at adjacent Ru active sites. The overpotentials require to reach the current density of 10 mA cm−2 for CER and OER were only 365 mV and 232 mV at the conditions of 5.0 M NaCl (pH = 7.0) and 1.0 M KOH + 0.5 M NaCl. More importantly, Ru + 20 %Cu@Ti demonstrates excellent stability, operates continuously for over 340h at industrial current density in neutral and alkaline electrolytes, and its strengthening life reaches 64 h, with ultra-low performance attenuation. Impressively, the designed applied electrode (8.0 cm ✕ 15.0 cm) achieves long-term CER at 0.2–0.3 A cm−2. Further industrial grade evaluation of CER shows that its chlorine extraction polarizability, enhances life and weight loss meet the requirements of industrial applications.

Ballistic and delayed photodissociation channels in the B̃ 2A11 state of water studied with resonant inelastic x-ray scattering

Photodissociation is one of the most important photoinduced chemical reactions. It occurs when the potential energy curve along a chemical bond is repulsive in an excited state. Typically, “ballistic” ultrafast dissociation leads to the broadening of absorption resonances and the smearing out of vibrational fine-structure. We report on the photodissociation of H2O in the B̃ 2A11 electronic state, characterized by a |3a1−14a11〉 configuration, which can be reached via resonant inelastic x-ray scattering or direct ultraviolet absorption. In both cases the spectra show narrow vibrational resonances, in spite of the dissociative character of the state. We find that “delayed” dissociation pathways, caused by reflection of the nuclear wave packet, are responsible for this effect. In spite of the analogous topology of the potential energy surfaces of the core- and valence-excited states, the reflection of the wave packet takes place only in the latter. The two-dimensional wave packet of the O-H stretching coordinates becomes trapped in a “cavity” near the Franck-Condon region, resulting from a mismatch between the OH vibrational frequency in the cavity and the one at the dissociation limit. Published by the American Physical Society 2024

Distinguishing laser-induced dissociation pathways of O 2 molecule based on alignment-dependent dissociation spectra in intense laser fields

We experimentally investigate the dissociative single ionization process, O 2 → O + + O, of aligned O 2 molecule in intense laser fields. The yield of a vibrational structure in the kinetic energy release spectra is measured as a function of alignment angle. By quantitative comparison of the measured angle-dependent dissociation probability with the simulation of a classical model that considers ionization and thus additional interaction within the laser pulse, we are able to distinguish the dissociation pathway that contribute to the vibrational structure. It is found that for a relative low laser intensity, the vibrational structure are produced from the dissociation pathway of a 4Π u → f 4Π g − 1ω. As the laser intensity increases, the increasing of the population probability of higher vibrational states and the absorbtion probability of more photons makes another two dissociation pathways open and become dominant.

Influence of zeolite framework, copper speciation, and water on NO2 and N2O formation during NH3-SCR

The catalytic activity of Cu-zeolites of different topologies: BEA, MFI, MOR, FER, and CHA, prepared by impregnation or by solid-state ion exchange, were evaluated for NO2 and N2O formation during NH3-SCR reaction with or without H2O. All catalysts obtained by solid-state ion exchange were active in wider temperature windows and exhibited higher selectivity to N2, compared to those obtained by impregnation. Regardless of the method of copper introduction, the zeolites with 3D channels (BEA, MFI, CHA) were more active than those with the 2D channel frameworks (MOR and FER). The multimodal formation of NO2 and N2O results from several identified parallel-consecutive pathways, controlled primarily by copper speciation and the reaction temperature. Decomposition of NH4NO3 occurs via thermal dissociation, dehydration, and comproportionation with NO routes. The topology of the zeolites has less influence on the extent of decomposition of NH4NO3 into N2O vs. NO2 (the N2O/NO2 ratio of 3.2–3.5 was found for all zeolites), exerting a more distinct impact on the decomposition onset. For zeolites with the 3D channels, it starts at lower temperatures, and the N2O and NO2 pathways are more separated with the increasing temperature, compared to the 2D channel zeolites. The NH4NO3 dissociation pathway is essentially controlled by Brønsted acidity of the zeolites.

Tunneling Mechanisms of Quinones in Photosynthetic Reaction Center–Light Harvesting 1 Supercomplexes

In photosynthesis, light energy is absorbed and transferred to the reaction center, ultimately leading to the reduction of quinone molecules through the electron transfer chain. The oxidation and reduction of quinones generate an electrochemical potential difference used for adenosine triphosphate synthesis. The trafficking of quinone/quinol molecules between electron transport components has been a long‐standing question. Here, an atomic‐level investigation into the molecular mechanism of quinol dissociation in the photosynthetic reaction center–light‐harvesting complex 1 (RC–LH1) supercomplexes from Rhodopseudomonas palustris, using classical molecular dynamics (MD) simulations combined with self‐random acceleration MD‐MD simulations and umbrella sampling methods, is conducted. Results reveal a significant increase in the mobility of quinone molecules upon reduction within RC–LH1, which is accompanied by conformational modifications in the local protein environment. Quinol molecules have a tendency to escape from RC–LH1 in a tail‐first mode, exhibiting channel selectivity, with distinct preferred dissociation pathways in the closed and open LH1 rings. Furthermore, comparative analysis of free energy profiles indicates that alternations in the protein environment accelerate the dissociation of quinol molecules through the open LH1 ring. In particular, aromatic amino acids form π‐stacking interactions with the quinol headgroup, resembling the key components in a conveyor belt system. This study provides insights into the molecular mechanisms that govern quinone/quinol exchange in bacterial photosynthesis and lays the framework for tuning electron flow and energy conversion to improve metabolic performance.

Diatomic Iron with a Pseudo-Phthalocyanine Coordination Environment for Highly Efficient Oxygen Reduction over 150,000 Cycles.

Atomically dispersed Fe-N-C catalysts emerged as promising alternatives to commercial Pt/C for the oxygen reduction reaction. However, the majority of Fe-N-C catalysts showed unsatisfactory activity and durability due to their inferior O-O bond-breaking capability and rapid Fe demetallization. Herein, we create a pseudo-phthalocyanine environment coordinated diatomic iron (Fe2-pPc) catalyst by grafting the core domain of iron phthalocyanine (Fe-Nα-Cα-Nβ) onto defective carbon. In situ characterizations and theoretical calculation confirm that Fe2-pPc follows the fast-kinetic dissociative pathway, whereby Fe2-pPc triggers bridge-mode oxygen adsorption and catalyzes direct O-O radical cleavage. Compared to traditional Fe-N-C and FePc-based catalysts exhibiting superoxo-like oxygen adsorption and an *OOH-involved pathway, Fe2-pPc delivers a superior half-wave potential of 0.92 V. Furthermore, the ultrastrong Nα-Cα bonds in the pPc environment endow the diatomic iron active center with high tolerance for reaction-induced geometric stress, leading to significantly promoted resistance to demetallization. Upon an unprecedented harsh accelerated degradation test of 150,000 cycles, Fe2-pPc experiences negligible Fe loss and an extremely small activity decay of 17 mV, being the most robust candidate among previously reported Fe-N-C catalysts. Zinc-air batteries employing Fe2-pPc exhibit a power density of 255 mW cm-2 and excellent operation stability beyond 440 h. This work brings new insights into the design of atomically precise metallic catalysts.

Ternary ordered L10-Pt-Co-Fe intermetallics for efficient ORR catalysis through dissociation pathway

Developing efficient and durable Pt-based electrocatalysts for oxygen reduction reaction (ORR) is critical for the practical application of fuel cells but still remains challenge at present. Here we successfully synthesized a series of ternary L10-PtCoxFe1-x (x=0.33, 0.50 and 0.67) intermetallic nanoparticles (NPs) supported on reduced graphene oxide for ORR catalysis. L10-PtCo0.50Fe0.50 exhibits the highest mass activity (MA) of 0.93 A mg−1Pt at 0.9 V (1.82 times the corresponding binary L10-PtCo intermetallics) and minimal activity loss (24.73 % loss in MA) after 30,000 potential cycles. By Density Functional Theory calculations, the excellent performance of ternary L10-PtCo0.50Fe0.50 can be ascribed to: (1) more efficient electronic structure regulation caused by dual-element driven electron transfer, which leads to more electron accumulation on Pt and weakens the over-binding of oxygen-containing species, (2) the unique two-center bridge pattern of O2 adsorption over Pt-Fe site leads to ORR proceeding via. the dissociative mechanism, avoiding the formation of OOH*.

Protonation-Induced Tautomerization Lowers the Activation Barriers for N-Glycosidic Bond Cleavage of Thymidine and 5-Methyluridine

Synergistic infrared multiple photon dissociation (IRMPD) action spectroscopy experiments and electronic structure calculations revealed that both 2,4-dihydroxy tautomers and O2 protonated conformers of protonated thymidine, [dThd+H]+, and protonated 5-methyluridine, [Thd+H]+ coexist in the gas phase with the 2,4-dihydroxy tautomers dominating the population. In the current study, the kinetic energy dependence of the collision-induced dissociation behavior of [dThd+H]+ and [Thd+H]+ are examined in a guided ion beam tandem mass spectrometer. The primary dissociation pathways observed involve N-glycosidic bond cleavage leading to competitive elimination of either protonated or neutral thymine. The potential energy surfaces (PESs) for these N-glycosidic bond cleavage pathways are mapped via electronic structure calculations for the mixture of 2,4-dihydroxy tautomers and O2 protonated conformers of [dThd+H]+ and [Thd+H]+ populated in the IRMPD experiments. The activation energies and heats of reaction predicted for N-glycosidic bond cleavage at the B3LYP and MP2(full) levels of theory are compared to the measured values. The agreement between experiment and theory indicates that B3LYP provides better estimates of the energetics of the species along the PESs for N-glycosidic bond cleavage of [dThd+H]+ and [Thd+H]+ than MP2, and that the 2,4-dihydroxy tautomers, which are stabilized by strong hydrogen-bonding interactions, control the threshold dissociation behavior of [dThd+H]+ and [Thd+H]+.

Deciphering the Decomposition Mechanisms of Ether and Fluorinated Ether Electrolytes on Lithium Metal Surfaces: Insights from CMD and AIMD Simulations.

The performance of lithium metal batteries can be significantly enhanced by incorporating fluorinated ether-based electrolytes, yet the solid electrolyte interphase (SEI) formation mechanism on lithium metal surfaces remains elusive. This study employs classical and ab initio molecular dynamics simulations to investigate the decomposition mechanisms of lithium bis(fluoromethanesulfonyl)imide (LiFSI) in 1,2-diethoxyethane (DEE) and its fluorinated analogues, F5DEE and F2DEE, when in contact with lithium metal. Our findings indicate that F5DEE-based electrolytes favor the formation of a FSI-rich primary solvation shell around Li+, while F2DEE-based electrolytes yield a solvent-rich environment. The normalized number density at the Li/electrolyte/Li interface shows a depletion of FSI anions in the electrochemical double layer (EDL) structure near the Li anode upon charging, with the distance between the first main peak of the FSI anion and Li anode following the order F5DEE < DEE < F2DEE. Analysis of the electronic projected density of states and charge transfer dynamics unveils the reductive dissociation pathways of FSI anions and fluorinated DEE solvents on the lithium metal surface, taking into account the influence of the EDL structure. DEE is identified as the most reduction-stable solvent, leading to the selective dissociation of FSI anions and the formation of an entirely inorganic SEI. In contrast, F2DEE displays a pronounced reduction tendency, forming an organic-rich SEI due to the solvent-dominated lowest unoccupied molecular orbital at the interface. F5DEE, competing with FSI anions for reduction, results in the formation of an inorganic-rich hybrid SEI with the highest LiF content. The simulation results correlate well with experimental observations and underscore the pivotal role of various fluorinated functional groups in the formation of EDL and SEI near the lithium metal surface.

Molecular interaction induced dual fibrils towards organic solar cells with certified efficiency over 20%

The nanoscale fibrillar morphology, featuring long-range structural order, provides abundant interfaces for efficient exciton dissociation and high-quality pathways for effective charge transport, is a promising morphology for high performance organic solar cells. Here, we synthesize a thiophene terminated non-fullerene acceptor, L8-ThCl, to induce the fibrillization of both polymer donor and host acceptor, that surpasses the 20% efficiency milestone of organic solar cells. After adding L8-ThCl, the original weak and less continuous nanofibrils of polymer donors, i.e. PM6 or D18, are well enlarged and refined, whilst the host acceptor L8-BO also assembles into nanofibrils with enhanced structural order. By adapting the layer-by-layer deposition method, the enhanced structural order can be retained to significantly boost the power conversion efficiency, with specific values of 19.4% and 20.1% for the PM6:L8-ThCl/L8-BO:L8-ThCl and D18:L8-ThCl/L8-BO:L8-ThCl devices, with the latter being certified 20.0%, which is the highest certified efficiency reported so far for single-junction organic solar cells.

Dissociative Ionization of the CHBr2Cl Molecule in 800 nm and 400 nm Femtosecond Laser Fields

The dissociative ionization of CHBr2Cl molecules in femtosecond laser fields at 800 nm and 400 nm is investigated to enhance the comprehension of ultrafast dynamics phenomena. The kinetic energy distribution of the resulting ions following photo-dissociation is analyzed using time-of-flight mass spectrometry in combination with DC-sliced ion velocity map imaging. The findings from the experimental study indicate that the presence of low kinetic energy components is attributed to the dissociative ionization processes of CHBr2Cl molecules. The complexity of individual dissociation pathways remains unaffected by the laser fields but is determined by factors such as bond energy, ionization energy of neutral groups, and charge distribution. In the case of 400 nm laser fields, distinct elimination channels enable CHBr2Cl+ ions to circumvent the transition state, leading to the formation of BrCl+ and Br2+ fragments.

Tracking ultrafast non-adiabatic dissociation dynamics of the deuterated water dication molecule.

We applied reaction microscopy to elucidate fast non-adiabatic dissociation dynamics of deuterated water molecules after direct photo-double ionization at 61eV with synchrotron radiation. For the very rare D+ + O+ + D breakup channel, the particle momenta, angular, and energy distributions of electrons and ions, measured in coincidence, reveal distinct electronic dication states and their dissociation pathways via spin-orbit coupling and charge transfer at crossings and seams on the potential energy surfaces. Notably, we could distinguish between direct and fast sequential dissociation scenarios. For the latter case, our measurements reveal the geometry and orientation of the deuterated water molecule with respect to the polarization vector that leads to this rare 3-body molecular breakup channel. Aided by multi-reference configuration-interaction calculations, the dissociation dynamics could be traced on the relevant potential energy surfaces and particularly their crossings and seams. This approach also unraveled the ultrafast time scales governing these processes.

Nitric Oxide Donor Sodium Nitroprusside Reduces Racemic Ketamine-But Not Esketamine-Induced Pain Relief.

The anesthetic, analgesic and antidepressant drug ketamine produces dissociation with symptoms of psychosis and anxiety, an effect attributed to neuronal nitric oxide depletion following N-methyl-d-aspartate blockade. There is evidence that dissociation induced by racemic ketamine, containing both ketamine enantiomers (S- and R-ketamine) but not esketamine (the S-isomer) is inhibited by nitric oxide (NO) donor sodium nitroprusside (SNP). We tested whether a similar intervention would reduce racemic and esketamine-induced analgesia in a randomized double-blind placebo-controlled trial. Seventeen healthy volunteers were treated with 0.5 μg.kg-1.min-1 SNP or placebo during a 3-h infusion of escalating doses of racemic ketamine (total dose 140 mg) or esketamine (70 mg). Pain pressure threshold (PPT) and arterial blood samples for measurement of S- and R-ketamine and their metabolites, S- and R-norketamine, were obtained. The data were analyzed with a population pharmacokinetic-pharmacodynamic model that incorporated the measured S- and R- ketamine and S- and R-norketamine isomers as input and PPT as output to the model. The potency of the 2 formulations in increasing PPT from baseline by 100% was 0.47 ± 0.12 (median ± standard error of the estimate) nmol/mL for esketamine and 0.62 ± 0.19 nmol/mL for racemic ketamine, reflecting the 52 ± 27% lower analgesic potency of R-ketamine versus S-ketamine. Modeling showed that SNP had no effect on S-ketamine potency but abolished the R-ketamine analgesic effect. Similar observations were made for S- and R-norketamine. Since SNP had no effect on S-ketamine analgesia, we conclude that SNP interacts on R-ketamine nociceptive pathways, possibly similar to its effects on R-ketamine activated dissociation pathways.

High-Temperature Pyrolysis Study of 2-Methyl-2-butanol behind Reflected Shock Wave: Shock Tube and Computational Study.

Pyrolysis of a branched alcohol, 2-methyl-2-butanol (2M2BOH), was carried out behind the reflected shock wave in the temperature range of 1011-1303 K and under pressures varying from 9.3 to 14.6 atm. Qualitative and quantitative analysis of the postshock mixture was performed using gas chromatography-mass spectrometry and gas chromatography with a flame ionization detector, respectively. The rate coefficients for the C-C and C-O bond cleavage reaction pathways were calculated using the variational transition-state theory. The Rice-Ramsperger-Kessel-Marcus/Master equation was employed to calculate the rate coefficients for the H2O-elimination reactions, unimolecular dissociation, and isomerization reaction pathways. The overall decomposition rate coefficient for the 2-methyl 2-butanol (2M2BOH) was estimated to be , where activation energy is given in kcal mol-1. The reaction path analysis was performed, which gives information regarding the contribution of individual intermediate species toward the decomposition of 2M2BOH. A set of reactions was proposed and used to simulate the combustion chemistry of 2M2BOH, which consists of 48 reactions and 39 species. The experimentally measured and simulated mole fractions for the reactant and products showed reasonably good agreement. This work additionally investigates the effect of branching on the decomposition kinetics of long-chain alcohols.

Ultraviolet Photodissociation Dynamics of the 1-Methylallyl Radical.

The ultraviolet (UV) photodissociation dynamics of the 1-methylallyl (1-MA) radical were studied using the high-n Rydberg atom time-of-flight (HRTOF) technique in the wavelength region of 226-244 nm. The 1-MA radicals were produced by 193 nm photodissociation of the 3-chloro-1-butene and 1-chloro-2-butene precursor. The 1 + 1 REMPI spectrum of 1-MA agrees with the previous UV absorption spectrum in this wavelength region. Quantum chemistry calculations show that the UV absorption is mainly attributed to the 3pz Rydberg state (perpendicular to the allyl plane). The H atom photofragment yield (PFY) spectrum of 1-MA from 3-chloro-1-butene displays a broad peak around 230 nm, while that from 1-chloro-2-butene peaks at ∼236 nm. The translational energy distributions of the H atom loss product channel, P (ET)'s, show a bimodal distribution indicating two dissociation pathways in 1-MA. The major pathway is isotropic in product angular distribution with β ∼ 0 and has a low fraction of average translational energy in the total excess energy, ⟨fT⟩, in the range of 0.13-0.17; this pathway corresponds to unimolecular dissociation of 1-MA after internal conversion to form 1,3-butadiene + H. The minor pathway is anisotropic with β ∼ -0.23 and has a large ⟨fT⟩ of ∼0.62-0.72. This fast pathway suggests a direct dissociation of the methyl H atom on a repulsive excited state surface or the repulsive part of the ground state surface to form 1,3-butadiene + H. The fast/slow pathway branching ratio is in the range of 0.03-0.08.