Disassembly Of Virus-like Particles Research Articles

Deciphering the Thermal Stability of Bacteriophage MS2-Derived Virus-like Particle and Its Engineered Variant.

RNA bacteriophage MS2-derived virus-like particles (VLPs) have been widely used in biomedical research as model systems to study virus assembly, structure-function relationships, vaccine development, and drug delivery. Considering the diverse utility of these VLPs, a systemic engineering approach has been utilized to generate smaller particles with optimal serum stability and tissue penetrance. Additionally, it is crucial to demonstrate the overall stability of these mini MS2 VLPs, ensuring cargo protection until they reach their target cell/organ. However, no detailed analysis of the thermal stability and heat-induced disassembly of MS2 VLPs has yet been attempted. In this work, we investigated the thermal stability of both wild-type (WT) MS2 VLP and its "mini" variant containing S37P mutation (mini MS2 VLP). The mini MS2 VLP exhibits a higher capsid melting temperature (Tm) when compared to its WT MS2 VLP counterpart, possibly attributed to its smaller interdimer angle. Our study presents that the thermal unfolding of MS2 VLPs follows a sequential process involving particle destabilization, nucleic acid exposure/melting, and disassembly of VLP. This observation underscores the disruption of cooperative intersubunit interactions and protein-nucleic acid interactions, shedding light on the mechanism of heat-induced VLP disassembly.

Process development for cross-flow diafiltration-based VLP disassembly: A novel high-throughput screening approach.

Virus-like particles (VLPs) are particulate structures, which are applied as vaccines or delivery vehicles. VLPs assemble from subunits, named capsomeres, composed of recombinantly expressed viral structural proteins. During downstream processing, in vivo-assembled VLPs are typically dis- and reassembled to remove encapsulated impurities and to improve particle morphology. Disassembly is achieved in a high-pHsolution and by the addition of a denaturant or reducing agent. The optimal disassembly conditions depend on the VLP amino acid sequence and structure, thus requiring material-consuming disassembly experiments. To this end, we developed a low-volume and high-resolution disassembly screening that provides time-resolved insight into the VLP disassembly progress. In this study, two variants of C-terminally truncated hepatitis B core antigen were investigated showing different disassembly behaviors. For both VLPs, the best capsomere yield was achieved at moderately high urea concentration and pH. Nonetheless, their disassembly behaviors differed particularly with respect to disassembly rate and aggregation. Based on the high-throughput screening results, a diafiltration-based disassembly process step was developed. Compared with mixing-based disassembly, it resulted in higher yields of up to 0.84 and allowed for integrated purification. This process step was embedded in a filtration-based process sequence of disassembly, capsomere separation, and reassembly, considerably reducing high-molecular-weight species.

Induced Disassembly of a Virus-like Particle under Physiological Conditions for Venom Peptide Delivery.

Virus-like particles (VLPs) show considerable promise for the in vivo delivery of therapeutic compounds such as bioactive venom peptides. While loading and targeting protocols have been developed for numerous VLP prototypes, induced disassembly under physiological conditions of neutral pH, moderate temperature, and aqueous medium remain a challenge. Here, we implement and evaluate a general mechanism, based on ring-opening metathesis polymerization (ROMP), for controllable VLP disassembly. This mechanism is independent of cell-specific factors or the manipulation of environmental conditions such as pH and temperature that cannot be readily controlled in vivo. The ROMP substrate norbornene is covalently conjugated to surface-exposed lysine residues of a P22 bacteriophage-derived VLP, and ROMP is induced by treatment with the water-soluble ruthenium catalyst AquaMet. Disruption of the P22 shell and release of a GFP reporter is confirmed via native agarose electrophoresis, TEM, and dynamic light scattering (DLS) analyses. Our ROMP disassembly strategy does not depend on the particular structure or morphology of the P22 nanocontainer and is adaptable to other VLP prototypes for the potential delivery of venom peptides for pharmacological applications.

A Cell-Free Assembly System for Generating Infectious Human Papillomavirus 16 Capsids Implicates a Size Discrimination Mechanism for Preferential Viral Genome Packaging.

We have established a cell-free in vitro system to study human papillomavirus type 16 (HPV16) assembly, a poorly understood process. L1/L2 capsomers, obtained from the disassembly of virus-like particles (VLPs), were incubated with nuclear extracts to provide access to the range of cellular proteins that would be available during assembly within the host cell. Incorporation of a reporter plasmid "pseudogenome" was dependent on the presence of both nuclear extract and ATP. Unexpectedly, L1/L2 VLPs that were not disassembled prior to incubation with a reassembly mixture containing nuclear extract also encapsidated a reporter plasmid. As with HPV pseudoviruses (PsV) generated intracellularly, infection by cell-free particles assembled in vitro required the presence of L2 and was susceptible to the same biochemical inhibitors, implying the cell-free assembled particles use the infectious pathway previously described for HPV16 produced in cell culture. Using biochemical and electron microscopy analyses, we observed that, in the presence of nuclear extract, intact VLPs partially disassemble, providing a mechanistic explanation to how the exogenous plasmid was packaged by these particles. Further, we provide evidence that capsids containing an <8-kb pseudogenome are resistant to the disassembly/reassembly reaction. Our results suggest a novel size discrimination mechanism for papillomavirus genome packaging in which particles undergo iterative rounds of disassembly/reassembly, seemingly sampling DNA until a suitably sized DNA is encountered, resulting in the formation of a stable virion structure. Little is known about papillomavirus assembly biology due to the difficulties in propagating virus in vitro. The cell-free assembly method established in this paper reveals a new mechanism for viral genome packaging and will provide a tractable system for further dissecting papillomavirus assembly. The knowledge gained will increase our understanding of virus-host interactions, help to identify new targets for antiviral therapy, and allow for the development of new gene delivery systems based on in vitro-generated papillomavirus vectors.

Assessing stability and assembly of the hepatitis B surface antigen into virus-like particles during down-stream processing

The hepatitis B surface antigen (HBsAg) is a recombinant protein-based vaccine being able to form virus-like particles (VLPs). HBsAg is mainly produced using yeast-based expression systems, however, recent results strongly suggest that VLPs are not formed within the yeast cells during the cultivation but are formed in a gradual manner during the following down-stream procedures. VLPs are also not detectable during the first down-stream steps including mechanical and EDTA/detergent-assisted cell destruction. Moreover, VLPs are not detectable in the cell lysate treated with polyethylene glycol and colloidal silica. The first VLP resembling structures appear after elution of HBsAg from colloidal silica to which it binds through hydrophobic interaction. These first VLP resembling structures are non-symmetrical as well as heterodisperse and exhibit a high tendency toward cluster formation presumably because of surface exposed hydrophobic patches. More symmetrical and monodisperse VLPs appear after the following ion-exchange and size-exclusion chromatography most likely as the result of buffer changes during these purification steps (toward more neutral pH and less salt). Final treatment of the VLPs with the denaturant KSCN at moderate concentrations with following KSCN removal by dialysis does not cause unfolding and VLP disassembly but results in a re- and fine-structuring of the VLP surface topology.

Detection of the Assembly and Disassembly of PCV2b Virus-Like Particles Using Fluorescence Spectroscopy Analysis

Monitoring the assembly and disassembly of virus-like particles (VLPs) is important in developing effective VLP-based vaccines. We tried to establish a simple and rapid method to evaluate the status of VLP assembly using fluorescence spectroscopic analysis (FSA) while developing a VLP-based vaccine against porcine circovirus type 2b (PCV2b). We synthesized the gene coding for PCV2b capsid protein (CP). The CP was expressed in Escherichia coli in a soluble form, dialyzed into three different buffers, and assembled into VLPs. The immunogenicity of the VLPs was evaluated by an enzyme-linked immunosorbent assay using the sera of mice immunized with inactivated PCV2b. The VLP assembly was detected using transmission electron microscopy and FSA. The assembled VLPs showed a distinct FSA curve with a peak at 320 nm. We found that the assembly status was related to the immunogenicity, fluorescence intensity, and morphology of the VLP. The FSA assay was able to monitor the various denatured statuses of PCV2b VLPs treated with β-mercaptoethanol or β-mercaptoethanol plus urea. We have demonstrated that FSA can be used to detect the assembly of PCV2b VLPs produced in E. coli. This provides a simple solution for monitoring VLP assembly during the production of VLP-based vaccines.

Disassembly and reassembly improves morphology and thermal stability of human papillomavirus type 16 virus-like particles

Recombinant human papillomavirus (HPV) 16 L1 protein self-assembles into virus-like particles (VLPs) with diameters of 40 to 60 nm, which are key components in prophylactic HPV vaccines. Marked improvement in morphology and thermal stability on VLP disassembly and reassembly was demonstrated at production scale. Differential scanning calorimetry showed enhanced conformational stability as indicated by the unfolding temperatures and peak heights/areas. Cloud point studies indicated (1) a much lower propensity for post-reassembly VLPs to aggregate during a time course study and (2) much higher cloud point temperatures. In-solution atomic force microscopy showed more uniform size distribution and fully closed particles, with evidence of virion-like assembly revealed by the structural details from a single particle image. Similar approaches for the reassembly of other recombinant VLPs with intrinsic conformational switches would be expected to improve the particle properties and render nanoparticles more suitable for use as vaccines or therapeutics. From the Clinical EditorThe authors of this study demonstrated that recombinant human papillomavirus 16 L1 protein self-assembles into virus-like particles (VLPs) with marked improvement in morphology and thermal stability on VLP disassembly and reassembly at production scale. This is expected to render these nanoparticles more suitable for use as vaccines or therapeutics.

Organization of the major and minor capsid proteins in human papillomavirus type 33 virus-like particles

The organization of the major (L1) and minor (L2) proteins in the human papillomavirus capsid is still largely unknown. In this study we analysed the disulphide bonding between L1 proteins and the association of L2 proteins with capsomers using virus-like particles obtained in insect cells by co-expression of the L1 and L2 genes of human papillomavirus type 33. About 50% of the L1 protein molecules in these particles (1.29 g/cm3) formed disulphide-bonded trimers. Reduction of the intermolecular disulphide bonds by dithiotreitol (DTT) treatment caused disassembly of virus-like particles into capsomers. This indicates that disulphide bonds between capsomers at the threefold symmetry positions of the capsid are essential for the assembly of the papillomavirus capsid. In contrast, the L2 protein was not engaged in intermolecular disulphide bonding. The L2 protein remained associated with capsomers on disassembly by treatment with DTT. When the disassembly was carried out in 0.65 M-NaCl, complete L2 protein molecules bound preferentially to capsomer oligomers, whereas truncated L2 protein molecules bound only to monomers. In 0.15 M-NaCl only complete L2 protein molecules remained bound to capsomers. This indicates that different regions of the L2 protein molecule are differentially involved in the association of the papillomavirus capsid.