Direct Visualization Research Articles

Direct Visualization of Confinement and Many‐Body Correlation Effects in 2D Spectroscopy of Quantum Dots

AbstractThe size tunable color of colloidal semiconductor quantum dots (QDs) is probably the most elegant illustration of the quantum confinement effect. As explained by the simple “particle‐in‐a‐box” model, the transition energies between the levels increase when the “box” becomes smaller. To investigate quantum confinement effects, typically a well‐defined narrow size distribution of the nanoparticles is needed. In this contribution, how coherent electronic two‐dimensional spectroscopy (2DES) can directly visualize the quantum size effect in a sample with broad size distribution of QDs is demonstrated. The method is based on two features of the 2DES – the ability to resolve inhomogeneous broadening and the capability to reveal correlations between the states. In QD samples, inhomogeneous spectral broadening is mainly caused by the size distribution and leads to elongated diagonal peaks of the spectra. Since the cross peaks correlate the energies of two states, they allow drawing conclusions about the size dependence of the corresponding states. It is also found that the biexciton binding energy changes between 3 and 8 meV with the QD size. Remarkably, the size dependence is non‐monotonic with a clear minimum.

Endoscopic Assisted Percutaneous Fixation of Anterior Inferior Iliac Spine Avulsion Fracture, Surgical Technique

Avulsion fractures of the anterior inferior iliac spine rarely occur in adolescent athletes during rectus femoris contractions or eccentric muscle lengthening while the growth plate is still open. Currently, there are no official guidelines in the literature on the treatment indications of this type of fracture or the type of surgical technique to be used. Nowadays, young and athletic patients desire a quick return to their previous activities, which makes surgical treatment a reasonable choice. Open reduction and internal fixation with an anterior approach are usually recommended when the avulsion fragment has more than 1.5–2 cm displacement on plain radiographs. However, ORIF is associated with a higher risk of heterotopic ossifications and increases the risk of damage to the LFCN. An endoscopic technique was designed to reduce these complications. This technical note describes a procedure of percutaneous fixation to AIIS through 3 endoscopic portals that could potentially minimize complications associated with an open surgical dissection, allowing anatomic reduction under direct visualization.

Probe the Dynamic Adsorption and Phase Transition of Underpotential Deposition Processes at Electrode-Electrolyte Interfaces.

Electrochemical scanning tunneling microscopy (EC-STM) and electrochemical quartz crystal microbalance (E-QCM) techniques in combination with DFT calculations have been applied to reveal the static phase and the phase transition of copper underpotential deposition (UPD) on a gold electrode surface. EC-STM demonstrated, for the first time, the direct visualization of the disintegration of (√3 × √3)R30° copper UPD adlayer with coadsorbed SO42- while changing sample potential (ES) toward the redox Pa2/Pc2 peaks, which are associated with the phase transition between the Cu UPD (√3 × √3)R30° phase II and disordered randomly adsorbed phase III. DFT calculations show that SO42- binds via three oxygens to the bridge sites of the copper with sulfate being located directly above the copper vacancy in the (√3 × √3)R30° adlayer, whereas the remaining oxygen of the sulfate points away from the surface. E-QCM measurement of the change of the electric charge due to Cu UPD Faradaic processes, the change of the interfacial mass due to the adsorption and desorption of Cu(II) and SO42-, and the formation and stripping of UPD copper on the gold surface provide complementary information that validates the EC-STM and DFT results. This work demonstrated the advantage of using complementary in situ experimental techniques (E-QCM and EC-STM) combined with simulations to obtain an accurate and complete picture of the dynamic interfacial adsorption and UPD processes at the electrode/electrolyte interface.

Porous silicon nanotube bundles as nanocarriers for small interfering RNA delivery

AbstractWe describe in this work an evaluation of bundles of hollow mesoporous silicon nanotubes to facilitate transfection of HeLa cells using small interfering RNA designed to knock down expression of Enhanced Green Fluorescent Protein (eGFP). These experiments entail direct visualization of the nanotube bundles associated with the cells using both scanning electron microscopy (SEM) and confocal fluorescence imaging. These nanotube bundles are generated by surface modification of nanotube arrays with aminopropyl‐triethoxysilane (APTES), followed by their ultrasonication in water, to create the amine‐terminated structures capable of electrostatic conjugation of siRNA at an efficiency of 23%–50% (depending on initial siRNA concentration). Delivery and transfection to HeLa cells are verified by quantification of fluorescence imaging; an average percent knockdown of ∼50% eGFP is achieved. As nanoscale drug delivery vehicles are expected to be resorbed in clinical use, we also assess SiNT bundle degradation during the above in vitro timescale using scanning and transmission electron (TEM) microscopies. We conclude with a brief discussion of challenges and opportunities in future experiments involving this platform.

DiMANI: diffusion MRI for anatomical nuclei imaging-Application for the direct visualization of thalamic subnuclei.

The thalamus is a centrally located and heterogeneous brain structure that plays a critical role in various sensory, motor, and cognitive processes. However, visualizing the individual subnuclei of the thalamus using conventional MRI techniques is challenging. This difficulty has posed obstacles in targeting specific subnuclei for clinical interventions such as deep brain stimulation (DBS). In this paper, we present DiMANI, a novel method for directly visualizing the thalamic subnuclei using diffusion MRI (dMRI). The DiMANI contrast is computed by averaging, voxelwise, diffusion-weighted volumes enabling the direct distinction of thalamic subnuclei in individuals. We evaluated the reproducibility of DiMANI through multiple approaches. First, we utilized a unique dataset comprising 8 scans of a single participant collected over a 3-year period. Secondly, we quantitatively assessed manual segmentations of thalamic subnuclei for both intra-rater and inter-rater reliability. Thirdly, we qualitatively correlated DiMANI imaging data from several patients with Essential Tremor with the localization of implanted DBS electrodes and clinical observations. Lastly, we demonstrated that DiMANI can provide similar features at 3T and 7T MRI, using varying numbers of diffusion directions. Our results establish that DiMANI is a reproducible and clinically relevant method to directly visualize thalamic subnuclei. This has significant implications for the development of new DBS targets and the optimization of DBS therapy.

The Future of Organic Cosmetics: AI-Enabled Sustainability

AI colour cosmetics applications emerged as an innovative solution to promote branded colour cosmetics and improve consumer decision making, primarily as a trial function. The purpose of this study is to investigate the factors that influence the adoption of AI colour cosmetics applications through the lens of social comparison theory. For promotion managers of cosmetic retailers and developers of AI colour cosmetics applications looking to promote and reach a large segment, managerial implications of this research are provided. Many leading retailers and cosmetic companies are adopting AI and machine learning technologies to better cater to their customers in the US by providing personalized products. The latest skin measurement tools allow for direct visualization and quantification of data, and as a result, there is great potential for further integration of machine learning in the cosmetics industry. With the aid of high- International Journal of Scientific Research in Engineering and Management (IJSREM) Volume: 08 Issue: 02 | February - 2024 SJIF Rating: 8.176 ISSN: 2582-3930 © 2024, IJSREM | www.ijsrem.com DOI: 10.55041/IJSREM28686 | Page 2 resolution visualization and IoT devices that can handle massive data flow, there is likely to be a significant impact on the industry in the future. It is expected that AI will become more prevalent in skin and cosmetics, facilitating age prediction, skin type assessment, and the development of analytical tools. As scientific and technological advancements continue, the use of artificial intelligence models is becoming more widespread. In cosmetic dermatology, artificial intelligence is being used in various new applications that are available to both patients and doctors. Patients now have greater control over their cosmetic care, thanks to the development of customizable skincare, augmented reality applications, and at-home skin analysis tools. Doctors are also utilizing artificial intelligence in innovative ways, including the creation of models for predicting treatment outcomes and instruments for comprehensive skin analysis. Further research is needed in areas such as robotically assisted treatments and automated energy-based therapy apparatuses. Artificial intelligence models in cosmetic dermatology are empowering patients to make more informed decisions about their skin care. Although AI has many benefits and applications, there are still areas where it needs to improve. Data protection and security must be a top priority. There is always a risk when relying on information provided by augmented reality platforms. We have seen recent examples of security breaches associated with such programs. Moreover, the outcomes produced by these applications may not always be reliable, and therefore, AI may not be entirely trustworthy. The skincare industry has experienced significant growth over the last decade, with a surge during the pandemic when the world became increasingly digital. Therefore, integrating AI into skincare is a promising concept. Keywords: Organic cosmetics, Sustainability, Artificial intelligence

Mitochondrial-Targeted Ratiometric Near-Infrared Fluorescence Probe for Monitoring Nitric Oxide in Rheumatoid Arthritis.

Rheumatoid arthritis (RA) is a destructive autoimmune disease, where nitric oxide (NO) is closely implicated in the inflammatory processes of RA. Therefore, direct visualization of NO is essential to assess the pathological changes in RA. Herein, a mitochondrial-targeted near-infrared ratiometric fluorescent probe (NFL-NH2), based on the intramolecular charge transfer effect, was synthesized and applied to monitor the changes of NO content in early RA. Specially, probe NFL-NH2 showed a 44-fold fluorescent intensity ratio (I705/I780) response toward NO with a detection limit of 0.536 nM, enabling qualitative and quantitative analysis of NO. Additionally, NFL-NH2 can accurately target mitochondria and sensitively detect exogenous and endogenous NO in RAW 264.7 cells. Notably, in vivo RA monitoring assays demonstrated that NFL-NH2 can rapidly detect NO levels associated with the inflammatory damage degree in RA mice models by ratiometric fluorescence imaging. These results validate that NFL-NH2 holds significant potential for diagnosing NO-mediated RA diseases.

Scalable manufacture of therapeutic mesenchymal stromal cell products on customizable microcarriers in vertical wheel bioreactors that improve direct visualization, product harvest, and cost

Background aimsHuman mesenchymal stromal cells (hMSCs) and their secreted products show great promise for treatment of musculoskeletal injury and inflammatory or immune diseases. However, the path to clinical utilization is hampered by donor-tissue variation and the inability to manufacture clinically relevant yields of cells or their products in a cost-effective manner. Previously we described a method to produce chemically and mechanically customizable gelatin methacryloyl (GelMA) microcarriers for culture of hMSCs. Herein, we demonstrate scalable GelMA microcarrier-mediated expansion of induced pluripotent stem cell (iPSC)-derived hMSCs (ihMSCs) in 500 mL and 3L vertical wheel bioreactors, offering several advantages over conventional microcarrier and monolayer-based expansion strategies. MethodsHuman mesenchymal stromal cells derived from induced pluripotent cells were cultured on custom-made spherical gelatin methacryloyl microcarriers in single-use vertical wheel bioreactors (PBS Biotech). Cell-laden microcarriers were visualized using confocal microscopy and elastic light scattering methodologies. Cells were assayed for viability and differentiation potential in vitro by standard methods. Osteogenic cell matrix derived from cells was tested in vitro for osteogenic healing using a rodent calvarial defect assay. Immune modulation was assayed with an in vivo peritonitis model using Zymozan A. ResultsThe optical properties of GelMA microcarriers permit noninvasive visualization of cells with elastic light scattering modalities, and harvest of product is streamlined by microcarrier digestion. At volumes above 500 mL, the process is significantly more cost-effective than monolayer culture. Osteogenic cell matrix derived from ihMSCs expanded on GelMA microcarriers exhibited enhanced in vivo bone regenerative capacity when compared to bone morphogenic protein 2, and the ihMSCs exhibited superior immunosuppressive properties in vivo when compared to monolayer-generated ihMSCs. ConclusionsThese results indicate that the cell expansion strategy described here represents a superior approach for efficient generation, monitoring and harvest of therapeutic MSCs and their products.

Effect of laser pre-treatment on adhesive joint performance and evaluation of interfacial strain distribution using mechanoluminescence

ABSTRACT In this study, factors that improve bonded joints structural response through laser surface pre-treatment on aluminum surfaces were investigated. Specifically, the focus was put on analyzing the laser treatment conditions, formation of the interface structure, and behavior of interface strength at the adhesive interface. The results revealed a specific range of laser treatment conditions in which tensile shear strength and fracture mode are stable. Although laser-treated adhesive joints showed cohesive failure similar to that observed in sandblasting or chemical treatment during the double cantilever beam test, the fracture toughness value was improved by a factor of 2 and 1.5, respectively. The laser-induced microstructure on the aluminum interface contributed to the improvement of fracture toughness. Furthermore, observation of the adhesive layer using a microscopic mechanoluminescence measurement system revealed that changes in the 3D structure of the interface significantly altered the stress luminescence pattern reflecting strain. As a result, direct visualization of interface strengthening via laser processing was achieved.

Garlic-Derived Exosome-like Nanovesicles-Based Wound Dressing for Staphylococcus aureus Infection Visualization and Treatment.

Garlic-derived exosome-like nanovesicles (GELNs) could function in interspecies communication and may serve as natural therapeutics to regulate the inflammatory response or as nanocarriers to efficiently deliver specific drugs. Staphylococcus aureus (S. aureus) is able to hide within host cells to evade immune clearance and antibiotics, leading to life-threatening infections. On-site detection and efficient treatment of intracellular S. aureus infection in wounds remain challenging. Herein, we report a thermosensitive, injectable, visible GELNs-based wound dressing, Van@GELNs/F127 hydrogel (gel Van@GELNs), which is H2O2-responsive and can slowly release vancomycin into host cells forS. aureus infection visualization and treatment in wounds. GELNs show inherent antibacterial activity, which is significantly enhanced after loading vancomycin. Both GELNs and Van@GELNs have the ability to be internalized by cells, so Van@GELNs are more effective than free vancomycin in killing S. aureus in RAW 264.7 macrophages. When applied to an S. aureus-infected wound on a mouse, the colorless HRP&ABTS/Van@GELNs/F127 solution immediately changes to a green hydrogel and shows better therapeutic effect than vancomycin. Thus, direct visualization by the naked eye and effective treatment of S. aureus infection in wounds are achieved by gel Van@GELNs. We anticipate gel Van@GELNs be applied for the theranostics of S. aureus infection diseases in the clinic in the near future.

Direct Visualization of Laser-Induced Coalescence and Alloying of Au into Ag Nanowires

Direct Visualization of Laser-Induced Coalescence and Alloying of Au into Ag Nanowires

Resolving Multi-Asperity Contacts at the Nanoscale through Super-Resolution Fluorescence Imaging.

Contact mechanics, spanning nanometer to tectonic scales, faces long-standing challenges arising from multiscale random roughness, which hinders experimental validation of theories. Understanding multi-asperity rough contacts is vital for addressing catastrophic consequences of these contacts failing such as earthquakes and for diverse technological applications. To visualize such contacts, we introduce a super-resolution microscopy method utilizing spontaneous millisecond ON/OFF fluorescence blinking of contact-sensitive molecular rotor molecules immobilized on a glass coverslip. This technique achieves ∼55 nm lateral imaging resolution for rough poly(methyl methacrylate) and glass spheres on glass contacts. For soft polymer spheres due to large plastic deformation, the resolution improvement does not significantly affect the area of real contact. However, for hard glass spheres, the real contact area is found to be 2.4 times smaller than that found by diffraction-limited imaging. This study highlights, through direct visualization, the impact of material stiffness on the nanoscale structure within the area of real contact.

Thermal evolution of low-temperature magnetic texture modulation in fept thin films by direct visualization

Patterns of ferroic domains and domain walls are being intensively studied to implement new logic schemes. Any technological application of such objects depends on a detailed understanding of them. Using low-temperature magnetic force measurements (10–300 K), the evolution of ferromagnetic stripes on equiatomic FePt thin films is thoroughly analyzed. Since FePt is known to develop a transition from in-plane homogeneous magnetization to stripe domains upon varying its thickness, multiple samples are studied demonstrating the well-established reduction upon thickness decrease and a non-trivial dependence on temperature. Moreover, the room-temperature uniform distribution of the pattern evolves into a distorted one upon temperature cycling. Finally, dissimilar stripe patterns are obtained upon reducing and increasing temperature indicating the states are dependent on the history of applied stimuli rather than the parametric conditions.

Self‐Powered Sweat‐Responsive Structural Color Display

AbstractDespite the remarkable progress in the development of sweat sensors, self‐powered sweat‐responsive sensing displays that detect sweat in electric signals with simultaneous and direct visualization of the sweat is rarely demonstrated. Here, a self‐powered sweat‐responsive structural color (SC) display enabled by ionomer‐doped block copolymer (BCP) photonic crystals (PCs) is presented. The sweat‐responsive BCP PC is developed by employing a cross‐linking single‐mobile ionomer (SMI) with mobile anions anchored to immobile polycations to a 1‐D BCP PC. The hydrophobic SMI‐doped BCP PC is mechanically robust as well as water and temperature‐resistive, exhibiting ionomer concentration‐dependent full visible SCs. Moreover, the mobile anions periodically confined in the SMI‐doped BCP PC harvest triboelectric energy, giving rise to a high‐power density of ≈0.774 Mw cm−2. Cation‐sensitive SC variation is observed in the SMI‐doped BCP PC, allowing the visualization of sweat containing various cations. A skin‐patchable self‐powered sweat‐responsive display is demonstrated in which kirigami‐patterned SMI‐doped BCP PC incorporated in the display can withstand up to 50% strain during exercise. Sweat from the exercise is visualized via SC display and measured using both ionic resistance changes and triboelectric signals. In addition, the integration of sweat sensing membrane into SMI‐doped BCP PC enables the quantification of sweat.

Directional vector visualization of scattered rays in mobile c-arm fluoroscopy.

Previous radiation protection-measure studies for medical staff who perform X-ray fluoroscopy have employed simulations to investigate the use of protective plates and their shielding effectiveness. Incorporating directional information enables users to gain a clearer understanding of how to position protective plates effectively. Therefore, in this study, we propose the visualization of the directional vectors of scattered rays. X-ray fluoroscopy was performed; the particle and heavy-ion transport code system was used in Monte Carlo simulations to reproduce the behavior of scattered rays in an X-ray room by reproducing a C-arm X-ray fluoroscopy system. Using the calculated results of the scattered-ray behavior, the vectors of photons scattered from the phantom were visualized in three dimensions. A model of the physician was placed on the directional vectors and dose distribution maps to confirm the direction of the scattered rays toward the physician when the protective plate was in place. Simulation accuracy was confirmed by measuring the ambient dose equivalent and comparing the measured and calculated values (agreed within 10%). The directional vectors of the scattered rays radiated outward from the phantom, confirming a large amount of backscatter radiation. The use of a protective plate between the patient and the physician's head part increased the shielding effect, thereby enhancing radiation protection for the physicians compared to cases without the protective plate. The use of directional vectors and the surrounding dose-equivalent distribution of this method can elucidate the appropriate use of radiation protection plates.

Neuronavigation-Specific Parameters for Selective Access of Trigeminal Rootlets in Radiofrequency Lesioning: A Cadaveric Morphometric Study.

Radiofrequency lesioning (RFL) is a safe and effective treatment for medically refractory trigeminal neuralgia. Despite gaining mainstream neurosurgical acceptance in the 1970s, the technique has remained relatively unchanged, with the majority of series using lateral fluoroscopy over neuronavigation for cannula guidance. To date, there are no studies describing neuronavigation-specific parameters to help neurosurgeons selectively target individual trigeminal rootlets. In this cadaveric study, we sought to provide a neuronavigation-specific morphometric roadmap for selective targeting of individual trigeminal rootlets. Embalmed cadaveric specimens were registered to cranial neuronavigation. Frontotemporal craniotomies were then performed to facilitate direct visualization of the Gasserian ganglion. A 19-gauge cannula was retrofit to a navigation probe, permitting real-time tracking. Using preplanned trajectories, the cannula was advanced through foramen ovale (FO) to the navigated posterior clival line (nPCL). A curved electrode was inserted to the nPCL and oriented inferolaterally for V3 and superomedially for V2. For V1, the cannula was advanced 5 mm distal to the nPCL and the curved electrode was reoriented inferomedially. A surgical microscope was used to determine successful contact. Morphometric data from the neuronavigation unit were recorded. Twenty RFL procedures were performed (10R, 10L). Successful contact with V3, V2, and V1 was made in 95%, 90%, and 85% of attempts, respectively. Mean distances from the entry point to FO and from FO to the clival line were 7.61 cm and 1.26 cm, respectively. In this proof-of-concept study, we found that reliable access to V1-3 could be obtained with the neuronavigation-specific algorithm described above. Neuronavigation for RFL warrants further investigation as a potential tool to improve anatomic selectivity, operative efficiency, and ultimately patient outcomes.

Arc root dynamics in the context of lightning strikes to aircraft

During lightning strikes to aircraft, there is a displacement of the impacted area on the aircraft’s surface and the dynamic of the arc root is a key to understanding and predicting the damage produced on the aircraft skin. This work aims at studying experimentally this dynamic with a new method of producing sweeping arcs based on a stationary arc and an electromagnetic launcher propelling aeronautical test samples. The experiments are also achieved with a wind tunnel that blows the arc on the test sample for comparison. After a description of the previous experiments of arc root displacement and a distinction between the cathodic and anodic emission processes, this paper characterizes the arc root physical properties with direct visualization through high-speed cameras and electric measurements for different initial conditions. The results are separated by the arc root polarity and discussed to give an insight into the influence of the experimental conditions on the interaction between the electric arc root and the test sample during swept-stroke. It is shown that for a cathodic arc root, the nature of the displacement—continuous or jumping—highly depends on the current level and the speed of the relative motion between the electric arc and the test sample. For an anodic arc roots, the variations of these parameters provoke jumping modes of displacement with different characteristics.

Transcortical transcatheter ultrasound-assisted technique for deep-seated brain tumors. Technical note.

Surgery of deep-seated brain tumors can be challenging. Several methods have been described to facilitate transcortical approaches, including ultrasound-assisted resection. Ultrasound-guided placement of a standard ventricular catheter is a widely reported technique and has been used to approach these lesions via the transcortical route. We describe how we usually perform this useful technique to assist and enhance the transcortical resection of some deep-seated brain tumors. Standard electromagnetic frameless navigation (S8 Neuronavigation System, Medtronic, Minneapolis, USA) was employed to focus the craniotomy and to plan the trajectory of the ventricular catheter. After dural opening, an ultrasound device (Arietta 850, Hitachi-Aloka Medical, Tokyo, Japan) was used for intraoperative ultrasound (IOUS) assessment. A ventricular catheter was placed from the cortex to the lateral wall of the tumor under direct real-time IOUS visualization to guide the further transcortical dissection. Transcortical transcatheter ultrasound-assisted technique involved minimal time and infrastructure requirements. There were no major technical difficulties during its use, providing confidence and improving subcortical white matter dissection by guiding the route to the tumor. Recent improvement of IOUS image-quality devices offers several attractive options for real-time navigation. The combination of conventional neuronavigation systems with real-time IOUS assessment during the intradural step provides a higher degree of control by improving the execution of the surgery. We hope this description may be a useful tool for some selected cases and contribute to the further enhancement and improvement of this widely used technique.

Conservative management of an early abdominal complication during a Tullio percutaneous endoscopic excision of renal pelvis urothelial carcinoma: A case report

BACKGROUND Upper tract urothelial carcinoma (UTUC) representing only a small fraction of all urothelial tumors. It predominantly affects the renal pelvis in men, often coexisting with bladder carcinoma. UTUC displays a more aggressive genetic profile compared to bladder neoplasms, with the majority of patients presenting with advanced disease. Histologically, about a quarter of UTUC cases exhibit high-grade subtypes, associated with a worse prognosis. Tobacco use and past exposure to aromatic amines are significant risk factors for UTUC. Imaging modalities such as Uro-computed tomography and magnetic resonance imaging play crucial roles in diagnosis. Ureterorenoscopy is vital for direct visualization and biopsy sampling, but its limited sampling capacity presents challenges in determining tumor depth and staging. Traditionally, nephroureterectomy with bladder cuff excision has been the gold-standard treatment for UTUC. Endoscopic conservative treatment has recently emerged as a viable option for selected patients, offering comparable oncological outcomes to radical surgery. Percutaneous access is also feasible for larger intrarenal tumors. CASE SUMMARY We present a case of an 84-year-old woman who underwent percutaneous endoscopic excision of a renal pelvis neoplasm using the Tullio laser. Despite successful tumor removal, the patient experienced a postoperative complication with abdominal fluid leakage. Conservative management effectively resolved the complication. Given the patient's age and refusal for radical surgery, the conservative approach proved to be a valid therapeutic choice. CONCLUSION Overall, UTUC remains a diagnostic and therapeutic challenge due to its rarity. However, advances in endoscopic and percutaneous techniques provide valuable alternatives for selected patients, warranting further exploration in this evolving field.

Real-time visualization of the laser-plasma wakefield dynamics.

The exploration of new acceleration mechanisms for compactly delivering high-energy particle beams has gained great attention in recent years. One alternative that has attracted particular interest is the plasma-based wakefield accelerator, which is capable of sustaining accelerating fields that are more than three orders of magnitude larger than those of conventional radio-frequency accelerators. In this device, acceleration is generated by plasma waves that propagate at nearly light speed, driven by intense lasers or charged particle beams. Here, we report on the direct visualization of the entire plasma wake dynamics by probing it with a femtosecond relativistic electron bunch. This includes the excitation of the laser wakefield, the increase of its amplitude, the electron injection, and the transition to the beam-driven plasma wakefield. These experimental observations provide first-hand valuable insights into the complex physics of laser beam-plasma interaction and demonstrate a powerful tool that can largely advance the development of plasma accelerators for real-time operation.