Direct V2V Communications Research Articles

5G-based V2V broadcast communications: A security perspective

The V2V services have been specified by the 3GPP standards body to support road safety and non-safety applications in the 5G cellular networks. It is expected to use the direct link (known as the PC5 interface), as well as the new radio interface in 5G, to provide a connectivity platform among vehicles. Particularly, vehicles will use the PC5 interface to broadcast safety messages to inform each other about potential hazards on the road. In order to function safely, robust security mechanisms are needed to ensure the authenticity of received messages and trustworthiness of message senders. These mechanisms must neither add significantly to message latency nor affect the performance of safety applications. The existing 5G-V2V standard allow protection of V2V messages to be handled by higher layer security solutions defined by other standards in the ITS domain. However having a security solution at the 5G access layer is conceivably preferable in order to ensure system compatibility and reduce deployment cost. Accordingly, the main aim of this paper is to review options for 3GPP access layer security in future 5G-V2V releases. Initially, a summary of 5G-V2V communications and corresponding service requirements is presented. An overview of the application level security standards is also given, followed by a review of the impending options to secure V2V broadcast messages at the 5G access layer. Finally, paper presents the relevant open issues and challenges on providing 3GPP access layer security solution for direct V2V communication.

Performance Analysis of Cellular-Relay Vehicle-to-Vehicle Communications

Vehicle-to-vehicle (V2V) communication-based cooperative vehicular networks are a key technology for future smarter transportation systems as they provide various applications for addressing road safety and traffic congestion. To alleviate the performance limitations of existing dedicated short-range communication (DSRC) protocols, cellular-assisted V2V communications have been proposed recently, wherein cellular base stations (BSs) relay the transmission from one vehicle to another. Such cellular-assisted communications have shown promise for more reliable V2V communications with a wider capacity and longer transmission distances. In this study, we theoretically analyze the performance of cellular-relay (CR) V2V communications, in which a vehicle first transmits a message to its nearest BS via uplink, and then, the BS forwards the message to a destination vehicle via downlink. We model the road segments through a Poisson line process and the positions of vehicles through a Poisson point process on the roads; subsequently, we derive a theoretical expression for the probability of a successful CR transmission and the mean local delay in the CR transmission. Furthermore, we propose a performance metric to evaluate the difference between the performances of CR and direct V2V communications, and it can be applied to automatic transmission mode selection (i.e., CR or direct) for V2V communications. We evaluate the analytical results using numerical examples and demonstrate the impacts of various system parameters on the performances of CR and direct V2V communications.

Multipoint channel charting-based radio resource management for V2V communications

We consider a multipoint channel charting (MPCC) algorithm for radio resource management (RRM) in vehicle-to-vehicle (V2V) and vehicle-to-infrastructure (V2I) communication systems. A massive MIMO (mMIMO) infrastructure network performs logical localization of vehicles to a MPCC, based on V2I communication signals. Combining logical distances given by channel charting with V2V measurements, the network trains a function to predict the quality of a direct V2V communication link from observed V2I communication signals. In MPCC, the network uses machine learning techniques to learn a logical radio map from V2I channel state information (CSI) samples transmitted from unknown locations. The network extracts CSI features, constructs a dissimilarity matrix between CSI samples, and performs dimensional reduction of the CSI feature space. Here, we use Laplacian Eigenmaps (LE) for dimensional reduction. The resulting MPCC is a two-dimensional map where the spatial distance between a pair of vehicles is closely approximated by the distance in the MPCC. In addition to V2I CSI, the network acquires V2V channel quality information for vehicles in the training set and develops a link quality predictor. MPCC provides a mapping for any vehicle location in the training set. To use MPCC for cognitive RRM of V2I and V2V communications, network management has to find logical MPCC locations for vehicles not in the training set, based on newly acquired V2I CSI measurements. For this, we develop an extension of LE-based MPCC to out-of-sample CSI samples. We evaluate the performance of link quality prediction for V2V communications in a mMIMO millimeter-wave scenario, in terms of the relative error of the predicted outage probability.

Stochastic Geometric Analysis in Cooperative Vehicular Networks Under Weibull Fading

We study the performance of a cooperative vehicular communication system in a highway traffic scenario, where the locations of co-channel interfering vehicles are modeled by a one-dimensional Poisson point process (PPP). Wireless channel modeling campaigns have shown that the statistical patterns of vehicle-to-vehicle (V2V) channels can often be modeled by the Weibull distribution. Due to the complex characteristics of random fading and interference, system performance analysis is involved. To address this issue, we establish a framework for performance analysis in vehicular networks under Weibull fading and one-dimensional Poisson field of interference, where the Weibull probability density function (PDF) is approximated by a finite exponential mixture. By this means, the approximation expressions of the successful/unsuccessful message transmission probabilities for both direct V2V communication and the three-node cooperative vehicular communication are derived through stochastic geometry. Monte-Carlo simulations verify the accuracy of our derivation, as well as the advantages of encouraging cooperation among vehicles. Our methods and results can potentially be used to facilitate stochastic geometric analysis in many other complex vehicular networks under Weibull fading.

LTE-V for Sidelink 5G V2X Vehicular Communications: A New 5G Technology for Short-Range Vehicle-to-Everything Communications

This article provides an overview of the long-term evolution-vehicle (LTE-V) standard supporting sidelink or vehicle-to-vehicle (V2V) communications using LTE's direct interface named PC5 in LTE. We review the physical layer changes introduced under Release 14 for LTE-V, its communication modes 3 and 4, and the LTE-V evolutions under discussion in Release 15 to support fifth-generation (5G) vehicle-to-everything (V2X) communications and autonomous vehicles' applications. Modes 3 and 4 support direct V2V communications but differ on how they allocate the radio resources. Resources are allocated by the cellular network under mode 3. Mode 4 does not require cellular coverage, and vehicles autonomously select their radio resources using a distributed scheduling scheme supported by congestion control mechanisms. Mode 4 is considered the baseline mode and represents an alternative to 802.11p or dedicated shortrange communications (DSRC). In this context, this article also presents a detailed analysis of the performance of LTE-V sidelink mode 4, and proposes a modification to its distributed scheduling.

On the Ability of the 802.11p MAC Method and STDMA to Support Real-Time Vehicle-to-Vehicle Communication

Traffic safety applications using vehicle-to-vehicle (V2V) communication is an emerging and promising area within the intelligent transportation systems (ITS) sphere. Many of these new applications require real-time communication with high reliability, meaning that packets must be successfully delivered before a certain deadline. Applications with early deadlines are expected to require direct V2V communications, and the only standard currently supporting this is the upcoming IEEE 802.11p, included in the wireless access in vehicular environment (WAVE) stack. To meet a real-time deadline, timely and predictable access to the channel is paramount. However, the medium access method used in 802.11p, carrier sense multiple access with collision avoidance (CSMA/CA), does not guarantee channel access before a finite deadline. In this paper, we analyze the communication requirements introduced by traffic safety applications, namely, low delay, reliable, real-time communications. We show by simulation of a simple, but realistic, highway scenario, that vehicles using CSMA/CA can experience unacceptable channel access delays and, therefore, 802.11p does not support real-time communications. In addition, we present a potential remedy for this problem, namely, the use of self-organizing time division multiple access (STDMA). The real-time properties of STDMA are investigated by means of the same highway simulation scenario, with promising results.