Direct Composite Resin Restorations Research Articles

Assessment of clinical performance of universal adhesives versus other adhesive systems: A systematic review and meta-analysis of clinical trials

Universal adhesives (UAs) often exhibit comparable or even superior bond strength to traditional adhesive systems, ensuring reliable and long-lasting adhesion between the resin composite and the tooth structure. Therefore, this study aimed to assess the clinical performance of UAs compared to other adhesive systems in direct resin composite restorations through a systematic review and meta-analysis. Two reviewers executed a literature search in five electronic databases: PubMed, EMBASE, Scopus, Web of Science, and Scielo. Clinical trials comparing the clinical evaluation of resin composite restorations in Class I, Class II, or Class V cavities placed with an universal adhesive (UA) system against resin composite restorations placed with another non-UA system were included in the review. An analysis was carried out using Review Manager software version 5.3.5 (London, England, United Kingdom). Standardized effect sizes with 95% confidence intervals were calculated to allow comparisons between different interventions and different outcomes. The methodological quality of each study was assessed using the Cochrane RoB2 tool for randomized clinical trials. A total of 2331 potentially relevant studies were identified. After title and abstract examination, 14 studies remained in the systematic review. From these, a total of 11 studies were included in the meta-analysis. The retention rates of resin composite restorations after 6 months showed no significant difference between total-etch (TE, p=0.83), or self-etch (SE, p=0.78) adhesives and UAs applied in TE and SE modes (p>0.05). However, UAs applied in selective-enamel etching (SEE) mode demonstrated superior clinical performance compared to other adhesives (p=0.01), particularly TE adhesives (p=0.02). Similarly, after >12 months of follow-up, there were no significant differences in retention rates among different adhesive modes (p>0.05). Additionally, the incidence of secondary caries did not significantly differ across adhesive modes at both 6-month and >12-month evaluations (p>0.05). This systematic review and meta-analysis suggested that UAs demonstrate comparable clinical performance to TE and SE adhesive systems in direct resin composite restorations, particularly in terms of restoration retention rates and the incidence of secondary caries. UAs applied in SEE mode exhibited superior clinical outcomes compared to other adhesive systems. These findings indicate that UAs can be considered a viable alternative to traditional adhesive systems in clinical practice, offering flexibility in application while maintaining comparable long-term outcomes.

Research on the method of digital technology assisted direct resin composite restoration for deep distal caries in mandibular second molars

Objective: To explore the digital design and fabrication technology of personalized restorative matrix for dental filling, and to explore the feasibility of direct resin restoration for deep caries lesions in distal neck of mandibular second molar. Methods: For patients with deep caries lesions in the distal neck of the mandibular second molar who visited the Department of Cariology and Endodontology of Peking University School and Hospital of Stomatology from September 2023 to April 2024, after preparing the cavity and gingival retractor, a three-dimensional intraoral scanner was used to obtain three-dimensional data of the patient's dentition. In the dental restoration computer-aided design software, the inlay function was used to generate the restored tooth morphology. The edge range of the personalized restorative matrix was drawn on the restored model by three-dimensional reverse engineering software to achieve edge sealing effect. The selected edge range data was processed with distal shelling to generate a digital model of a personalized restorative matrix with a thickness of 0.5 mm. A metal three-dimensional printer was used to fabricate the titanium alloy restorative matrix, and its application was completed in 10 clinical cases. The marginal adaptation and retention stability of the personalized restorative matrix were evaluated under a dental microscope, and forming effect evaluation was performed through immediate postoperative periapical radiographs. Results: The preliminary clinical application of the personalized restorative matrix fabricated using digital technology revealed that, in the treatment of 10 affected teeth, rubber dam isolation was successfully ensured, resulting in clinically effective direct resin composite restorations with optimal marginal adaptation and reasonable contours. Immediate postoperative periapical radiographs showed good convexity of the filling body, with no overhangs found. Both marginal adaptation and retention stability met the requirements of clinical treatment. Conclusions: The personalized restorative matrix designed in this study can solve the clinical problems of moisture separation and resin forming in the treatment of deep caries lesions in distal neck of the mandibular second molar, and can achieve stable and reliable adhesive restoration effects.

Clinical performance of polyethylenefiber reinforced resin composite restorations in endodontically treated teeth: (a randomized controlled clinical trial)

AimThe purpose of this study was to evaluate the performance of polyethylene fiber reinforced resin composite fillings compared to bulk fill resin composite fillings in endodontically treated teeth over a two-year monitoring period.MethodA total of 240 individuals with endodontically treated lower molars and a moderate amount of tooth structure were divided into two equal groups of 120 each. One group received polyethylene fiber reinforced bulk fill resin composite restorations while the other group received only bulk fill resin composite restorations, both applied as per manufacturer guidelines. Two proficient experienced blinded assessors assessed the restorations using modified USPHS criteria at baseline, 6, 12, and 24 months.Statistical analysis usedData analysis involved the utilization of Mann-Whitney U, Friedman’s test, and Nemenyi post hoc test, with age data being displayed as mean and standard deviation. The significance level was established as p < 0.05, and R software was utilized for statistical analysis.ResultsThere were no notable distinctions in any parameters or scores between the intervention and comparator groups at various time points. Alpha scores were present for retention, gross fracture, and secondary caries at all follow up intervals.ConclusionBoth direct resin composite restorations reinforced with polyethylene fibers and direct bulk fill resin composite restorations placed in endodontically treated molars with moderate remaining tooth structure demonstrated satisfactory clinical outcomes during a 24-month follow-up period.Clinical relevanceBulk fill resin composites directly placed in endodontically treated molars with moderate remaining tooth structure showed promise as a treatment option over a two-year period.Clinical trial registration(06-01-2022) on https://ClinicalTrials.gov with the ID (NCT05180903).

Effects of stamp material and restoration depth on the accuracy of direct composite resin restorations using stamp technique

ObjectivesTo evaluate the effects of different stamp materials and restoration depths on the accuracy of direct composite resin restorations using stamp technique. MethodsEighty standard resin teeth were divided into four groups based on different stamp materials: flowable composite resin (FR), vinyl polydimethyl siloxane (VPS) for bite registration (VB), VPS for impression (VI) and transparent VPS (TV). Each material group was further divided into two subgroups based on restoration depth (1 and 2 mm; n = 10). Standardized Class I cavities were prepared and restored with the corresponding stamps. Pre- and post-treatment scans of each tooth were fitted using Geomagic Control X software, generating deviation distribution maps of the occlusal surface. The accuracy indicators, including mean height variation (MHV), root mean square (RMS), and proportions of height variation with different ranges (PHVrange), were recorded to evaluate the accuracy of restorations. Analysis of variance (ANOVA) were used for statistical analysis (α=0.05). ResultsThe type of stamp material significantly affected all accuracy indicators, while restoration depth did not show a significant effect on any of the indicators. MHV values ranged from 29.70 ± 5.88 μm to 63.52 ± 9.58 μm, and RMS values ranged from 62.78 ± 8.76 μm to 101.79 ± 13.17 μm, displaying a trend of FR<VB<VI<TV. The FR groups had the highest PHV<0.05mm values (72.24 ± 3.40 % for 1 mm, 71.47 ± 8.54 % for 2 mm) and the lowest PHV>0.2mm values (0.70 ± 0.50 % for 1 mm, 0.94 ± 0.47 % for 2 mm). In contrast, the TV groups exhibited the lowest PHV<0.05mm values (59.69 ± 10.23 % for 1 mm, 59.67 ± 5.70 % for 2 mm), while the VI groups showed the highest PHV>0.2mm values (7.34 ± 1.58 % for 1 mm, 8.20 ± 3.16 % for 2 mm). ConclusionsThe accuracy of direct composite resin restorations using stamp made of flowable composite resin was higher than that of all tested VPS materials, thereby reducing the need for occlusal adjustment and improving clinical efficiency. Besides, restoration depth had no significant impact on the accuracy of stamp technique, regardless of the stamp material used. Clinical significanceThe accuracy of direct composite resin restorations using stamp technique with different stamp materials varies. The flowable composite resin stamp exhibits higher accuracy compared with VPS stamps, reducing the need for occlusal adjustments.

Evaluation of direct restorations for pit-and-fissure caries using stamp combined with single-shade composite resin technique: A 12-month follow-up in vivo study

ObjectivesTo evaluate the clinical performance of direct restorations for pit-and-fissure caries in molars using stamp combined with single-shade composite resin (S/SCR) technique, and assess the effect of the number of stamp pressing on the trueness of S/SCR technique. MethodsTwenty molars of fifteen patients with pit-and-fissure caries but with an intact or micro-cavitated occlusal morphology were restored using S/SCR technique and were randomly divided into single pressing group (n = 10) and double pressing group (n = 10). Intraoral scans were obtained before treatment (scan 1), after filling (scan 2) and after polishing (scan 3). Deviation distribution maps of pairwise fitting were created including comparison 1 (scan1/scan 2), comparison 2 (scan1/scan 3), and comparison 3 (scan2/scan 3) using Geomagic Control X software. Root mean square (RMS) values were calculated to evaluate the trueness of restorations. Clinical performances including esthetic, functional, and biological properties of all restorations were evaluated according to FDI criteria after a 12-month follow-up. Analysis of variance, independent-samples T test and Wilcoxon rank-sum test were used for statistical analysis (α=0.05). ResultsRMS values for comparison 1, comparison 2, and comparison 3 were 0.1243 ± 0.0151, 0.0966 ± 0.0136, and 0.0605 ± 0.0137 mm in single pressing group, while 0.0831 ± 0.0140, 0.0741 ± 0.0107, and 0.0475 ± 0.0099 mm in double pressing group, respectively. RMS value of single pressing group was higher than that of double pressing group in the same comparison (p ≤ 0.001). No statistically significant differences were observed between the two groups regarding esthetic, functional and biological properties (p > 0.05). For all properties, all restorations scored within 3, with over 80% scoring 1. ConclusionS/SCR technique presents satisfying clinical performances for pit-and-fissure caries in molars after a 12-month follow-up. Besides, double pressing can improve the trueness of restorations compared to single pressing. Clinical significanceS/SCR technique is efficient in direct composite resin restoration for pit-and-fissure caries, with satisfying esthetic, functional and biological properties after a 12-month follow-up. Significantly, double pressing improves the trueness of S/SCR technique, reducing the need for occlusion adjustment.

Endodontic Management of Mandibular Second Molar with Middle Distal Canal

Mandibular second molar is often associated with variations in root canal morphology. Despite the intricate association, the occurrence of middle distal canal in endodontic literature is limited, with an incidence of 0.2% to 3%. Therefore, this study presents a case report describing a clinical situation in mandibular second molar that shows four canals, opening into different apical foramens. A 30-year-old male patient came to the Rumah Sakit Gigi dan Mulut of Universitas Sumatera Utara with the main complaint of intermittent pain in the lower right tooth persisting for two days. The results of clinical examination of the lower right second molar labeled as #47, showed a temporary filling, while radiography indicated widened periodontal ligament space and termination of lamina dura. After receiving informed consent, root canal therapy was carried out, and a direct resin composite onlay was selected for final restoration. To locate and treat hidden and unusual anatomy, dentists are often required to possess a comprehensive understanding of internal dental anatomy and use modern instruments, such as the dental operating microscope and ultrasonic tips. In certain clinical, direct resin composite onlay restorations can represent a valid alternative to traditional indirect restorations. In conclusion, this study shows that a comprehensive understanding of the potential variances in the internal anatomy of human teeth is essential to achieving successful outcomes in endodontic therapy.

Fracture Resistance of Direct versus Indirect Restorations on Posterior Teeth: A Systematic Review and Meta-Analysis.

The aim of this systematic review and meta-analysis was to compare static compression forces between direct composite resin restorations and indirect restorations for posterior teeth. All studies comparing mechanical properties of direct versus indirect restorations of posterior teeth were included from 2007 up to February 2024. A meta-analysis was conducted for static compression fracture resistance. Medline, Central, and Embase databases were screened. Twenty-four articles were included in the qualitative synthesis, and sixteen studies were finally included in the quantitative synthesis. There was no difference in terms of fracture resistance between direct and indirect restorations for posterior teeth (p = 0.16 for direct and indirect composite resin restorations and p = 0.87 for direct composite resin restorations and indirect ceramic restorations). Also, sub-group analysis with or without cusp coverage in each group revealed no discernable difference. Based on this study, it can be concluded that the choice between direct and indirect restoration approaches may not significantly impact fracture resistance outcomes. There was no statically significant difference between direct and indirect restorations for posterior teeth in all cases of restorations with or without cusp coverage and no matter the used materials. However, to better evaluate these materials, further studies are warranted.

The Evaluation of the Cervical Marginal Sealing of Direct vs. Indirect Composite Resin Restorations in MOD Cavities.

The aim of this in vitro study was to compare the quality of marginal sealing at the cervical margins of indirect and direct composite resin restorations in mesio-occluso-distal (MOD) cavities. MOD preparations were performed on 30 extracted teeth. The mesial cervical margin of each tooth was relocated using a flow composite resin (Enamel Plus HRi Flow, Micerium, Avegno, GE, Italy), then the samples were divided into three groups. In group A, the cavities were directly restored using a nanohybrid composite resin (Miris 2 Coltène Whaledent, Altstaetten, Switzerland) and a universal adhesive (ScotchBond Universal, 3M ESPE, St. Paul, MN, USA) by the etch-and-rinse strategy, for group B, the restoration procedure was similar but the self-etch strategy was used, and the samples in group C were filled using the inlay technique. Each sample was stored for 48 h in a 2% methylene blue solution, then it was cut in a mesio-distal direction using a Struers Secotom 50 device (Cleveland, OH, USA). The marginal sealing and adhesive interface were assessed for each sample at the cervical margin by optical microscopy (OM) and scanning electron microscopy (SEM). One-way ANOVA and Bonferroni post-hoc tests were used with a significance level of 0.05. Significant differences were recorded within groups A and C, between mesial and distal margins (p = 0.02 in group A and p = 0.043 in group C). The marginal sealing is more effective in MOD inlay restoration compared to direct restorations. Relocation of the cervical margin with flow composite resin and the use of different adhesive strategies do not improve the marginal sealing.

Treatment of wedge-shaped lateral incisors with direct composite veneer restorations: two case presentations

Wedge-shaped lateral incisors are teeth associated with dental anomalies, often encountered in maxillary teeth, characterized by being smaller than normal and having cylindrical or pointed shapes. For achieving an aesthetic appearance in treatment, ceramic or composite restorations are commonly preferred. However, ceramic restorations are not recommended as the primary choice for treating wedge-shaped lateral teeth due to their tendency to cause more substance loss in dental tissues, higher costs, and challenging repairs compared to composite restorations. In cases where patients presented with bilateral wedge-shaped lateral incisors seeking aesthetic improvements, various treatment options were explained to them, and after evaluating their preferences, the decision was made to use direct resin composite restorations for aesthetic enhancement. The color of the teeth was determined, and an appropriate composite resin was selected. Following the completion of the restorations, finishing and polishing procedures were applied. The purpose of presenting these two cases is to demonstrate the use of direct composite veneer restorations in achieving aesthetic treatment.

Transitioning from injectable resin composite restorations to resin composite CAD/CAM veneers: A clinical report.

To describe a shift from injectable resin composite technique to composite resin computer-aided design and computer-aided manufacturing (CAD/CAM) veneers in addressing esthetic concerns associated with diastemas between anterior lower teeth in a clinical case. Among several techniques proposed for direct resin composite restoration, the "Injectable resin composite technique" has gained popularity for its time-efficiency, reduced technique sensitivity, and diminished reliance on clinician skills. However, challenges such as staining and the need for frequent polishing follow-ups may prompt the consideration of more stable alternatives such as indirect veneer restorations. While ceramic veneers offer superior mechanical and optical properties, resin ceramic veneers, especially those milled from CAD/CAM resin ceramic blocks, offer advantages such as rapid, cost-effective production, simplified intra-oral repairs, less susceptibility to fracture, superior stress absorption, and requires minimal tooth preparation, making them an appealing option for many patients. Moreover, a fully-digital approach not only streamlines the process but also saves time and labor while ensuring the delivery of high-quality restorations to patients. In addressing a patient's dissatisfaction with constant polishing of direct resin composite restorations, a shift to resin composite CAD/CAM veneers was implemented. Utilizing a fully-digital approach with CAD/CAM resin ceramic restorations successfully restored both esthetics and function. While the injectable resin composite technique achieves immediate esthetic results, its low color stability necessitates frequent polishing sessions. The replacement of direct resin composite restorations with CAD/CAM resin composite veneers becomes a viable option for patients seeking more stable restorations that require fewer follow-ups. This transition addresses both esthetic concerns and the need for enduring solutions in restorative dentistry.

Management of midline diastema using the direct composite resin technique - A case report

Diastema or space between the anterior teeth is a common aesthetic complaint of patients. Direct composite resins in midline diastema cases allow dentists to have complete control in formation of natural smiles. This case report describes midline diastema closure with esthetic composite layering technique. A 25-year-old male patient reported to the clinic, with a complaint of spacing in the upper front tooth region of the jaw. The direct aesthetic composite laminate veneer was considered as the treatment of choice for the build-up of both maxillary central incisors as a more conservative, inexpensive, aesthetic, and quicker option. A2 &amp; A3 shades were selected; prepared tooth surface was etched for 15 seconds using 37% phosphoric acid, rinsed with water for 20 seconds, and air dried with slight air pressure. Bonding agent was applied (Adper single Bond, 3M ESPE, USA) and cured for 20 seconds using (Vivadent Blue phase) curing light. The labial surface of the restoration was flattened using red banded knife-edge tip diamond bur. The natural look of the restored teeth was achieved after finishing and polishing. At six-month and one-year recalls the general outlook of the maxillary anterior teeth was considered natural and aesthetical. Clinically, both restorations have no fractures and also the restoration margins on both maxillary central incisors demonstrated no discolorations. By taking this into consideration and according to the positive results, an experienced dentist with proper case selection, using an appropriate technique and modern materials, can perform highly aesthetic and durable direct composite resin restorations that can satisfy patients as under the conditions of the case presented.

A Minimally Invasive Esthetic Approach for Teeth with Molar Incisor Hypomineralization: a Clinical Case Report

Molar incisor hypomineralization (MIH) is a qualitative defect of enamel, clinically characterized by white or yellow/brownish demarcated opacities that affect permanent molars, often associated with permanent incisors. The etiology is multifactorial, including systemic and genetic/epigenetic factors. Defects of anterior teeth can negatively impact children since they might present lower self-esteem and socialization problems. Purpose: To describe a minimally invasive treatment for anterior teeth affected by molar incisor hypomineralization, performed with direct composite resin restoration and a universal adhesive system. Case Report: An 8-year-old patient sought dental care with complaints about her dental appearance, reporting suffering from school bullying. She presented a white-yellowish opacity on the maxillary right central incisor. After a clinical examination, she was diagnosed with molar incisor hypomineralization. To improve dental esthetics, a direct composite resin restoration was proposed. The enamel surface was prepared and etched with 35% phosphoric acid etchant solution for 15 seconds before applying the universal adhesive system. Two different shades of the composite were used for layering the material to disguise the defect without extensive removal of the dental structure. The result was satisfactory as it was possible to mask the opacity, reestablish enamel thickness, and improve the patient's quality of life. Conclusion: Conservative restorations comprising a universal adhesive system seem to bring desirable esthetic results for anterior teeth with molar incisor hypomineralization.

The treatment options for the traumatically fractured tooth; Case reports

The traumatic accident could cause various damages to the teeth and surrounding tissues. It makes dentist embarrass be-cause it not only requires the dentist to make quick decision, but also delayed decision affect the prognosis of the treatment. Depending on the location of the fracture, the fractured teeth are divided into crown fracture without pulpal involvement (Uncomplicated crown fracture), crown fracture with pulpal involvement (Complicated crown fracture), crown-root frac-ture, and root fracture. When the crown was fractured, treatment was performed with reattachment of the fragment or direct composite resin restoration depending on the presence or absence of the crown fragment. In the case of crown-root fracture, the direction of treatment can be set depending on whether the moisture control for final restoration is properly performed. In the case of root fracture, follow-up was observed after fixation using resin wire splint fixation, and if necessary, endodontic treatment of the crown fragment is recommended. The cases reported here have led to positive treatment outcome in fractured tooth for various traumatized situation.

Delayed vs. immediate placement of restorative materials over Biodentine and RetroMTA: a micro-shear bond strength study

BackgroundThe aim of the present study was to investigate the micro-shear bond strength (µSBS) of various restorative materials applied on two different fast-setting calcium silicate-based materials and to evaluate the effect of restoration time on µSBS.MethodsA total of 180 acrylic blocks with a cavity in the center were randomly divided into 2 main groups according to the capping material to be used (Biodentine or RetroMTA). The specimens were also randomly divided into 3 groups according to the restoration time (3 min, 12 min, 24 h). After the specified waiting periods, glass hybrid material (EQUIA Forte HT), resin composite (Filtek Z550) and light-cured calcium silicate material (Theracal LC) were placed on the specimens with tygon tubes. The specimens were kept for 24 h and then subjected to µSBS test. Statistical analysis was performed by 3-way ANOVA followed by Tukey test for pairwise comparisons (α = 0.05).ResultsThere is a statistically significant difference (p < 0.05) between the µSBS values obtained by applying resin composite on RetroMTA after different setting times (24 h > 12 min > 3 min). The µSBS obtained for the Biodentine-resin composite at the end of the 3 min setting time is significantly lower (p < 0.05) than the µSBS values at 12 min and 24 h. For both calcium silicate cements, at the end of all time periods, the µSBS obtained when resin composite was applied at the end was higher than the other materials (p < 0.05).ConclusionsFor Biodentine-resin composite bonding, the manufacturer’s recommendation of 12 min can be considered an appropriate time, whereas for RetroMTA-resin composite bonding, the µSBS increased as the waiting time increased. Regardless of the waiting time, it is recommended to prefer direct composite resin restoration over Biodentine and RetroMTA.

Multidisciplinary Treatment: Follow-Up of Dental Autotransplantation for 10 Years.

The objective is to present a clinical case of dental autotransplantation managed with surgery, orthodontics, endodontics, periodontics, and aesthetic rehabilitation. A 10-year-old boy sought treatment after avulsion of the maxillary left central incisor, which was not reimplanted. Based on anamnesis, clinical examination, and complementary examinations, agenesis of the maxillary and mandibular second premolars except the mandibular right second premolar was observed. After a multidisciplinary planning, the space in the maxillary left central incisor region was opened to receive the transplanted mandibular right second premolar. The receptor site was created in a single surgical procedure. Pulp necrosis was noted in the transplanted tooth, which was treated endodontically, and the agenesis spaces were closed using fixed orthodontic appliances. After removing the appliance, gingivectomy with osteotomy was performed in the maxillary right central incisor and the transplanted tooth regions to harmonize the height and shape of the gingival contour. Next, aesthetic readjustment was performed with tooth whitening, using office and home techniques, followed by microabrasion of the vestibular surface of the maxillary right central incisor. Direct composite resin restorations were placed in the maxillary incisors, and the teeth were rehabilitated using incisal and palatal guides. A multidisciplinary approach is essential for reestablishing the function and aesthetics of complex cases involving dental autotransplantation.

Straightforward replication of digital wax-up design into direct composite resin restorations in adolescents using a custom 3-dimensionally printed index

Straightforward replication of digital wax-up design into direct composite resin restorations in adolescents using a custom 3-dimensionally printed index

Esthetic rehabilitation of labial tooth defects caused by caries of the anterior teeth using a composite resin injection technique with veneer-shaped 3D printing indices.

An 18-year-old woman sought treatment for caries of the anterior teeth after completing orthodontic treatment. Direct composite resin restoration was chosen because the patient preferred a minimally invasive and cost-effective treatment whenever possible. Based on diagnostic wax-up, veneer-shaped indices for composite resin injection were designed to replicate and restore tooth defects rapidly and accurately. The overall esthetic result was excellent after a 1-year of follow-up. Direct freehand composite resin restorations are clinically challenging. The recently proposed 3D printing index for the composite resin injection technique is helpful for direct restoration but is challenging to remove. The veneer-shaped indices avoid the formation of an undercut in the direction of removing the index, making them easy to remove after finishing the restorations. Using veneer-shaped indices for composite resin injection enables rapid esthetic rehabilitation of labial tooth defects caused by caries. This approach reduces chairside time and operational difficulty while allowing for easy index removal after completing the restorations.

Performance of direct and indirect onlay restorations for structurally compromised teeth

Research is lacking on the restoration of structurally compromised posterior teeth using direct composite resin or indirect restorations. The purpose of this in vitro study was to measure the fracture resistance and microleakage of different onlay restorations fabricated by using conventional and digital computer-aided design and computer-aided manufacturing (CAD-CAM) to restore structurally compromised teeth. Mandibular molars (n=54) were prepared for onlay restorations. Teeth were allocated to 3 groups (n=18) according to the type of restoration materials, nanohybrid composite resin (Grandio blocs), resin hybrid ceramic (SHOFU Block HC), and fiber-reinforced composite resin (everX Posterior). Onlays were bonded using a dual-polymerized adhesive resin cement. All specimens were thermocycled, followed by cyclic loading. Based on the type of investigation conducted, fracture resistance, and microleakage test, each group was then divided into 2 equal subgroups (n=9). The collected data were statistically analyzed with the chi-square of the Fischer exact test (α=.05). Fracture resistance testing revealed a statistically significant difference between groups (P<.001). The fiber-reinforced composite resin demonstrated the highest fracture resistance, with statistically significantly less microleakage compared with the other groups (P=.013). Direct fiber-reinforced composite resin could be considered a suitable alternative to CAD-CAM composite resin for the restoration of structurally compromised teeth.

Direct or indirect composite for restoring permanent first molars affected by Molar Incisor Hypomineralisation (MIH): a randomized clinical controlled trial

AimThis study was undertaken to compare direct composite resin restorations (DCRR) and indirect composite resin restorations (ICRR) for treating permanent first molars affected by MIH in terms of clinical performance.Materials and methodsThis was a controlled, randomized, clinical split-mouth study. The studied sample consisted of 40 asymptomatic first permanent hypomineralised mandibular molars in 20 children aged between 7–11 years, these cases were divided randomly into two groups: Group 1 (experimental): 20 first permanent mandibular molars were restored with ICRR, and Group 2 (control): 20 first permanent mandibular molars that were restored with DCRR. The cavity was prepared using a diamond bur on a high-speed handpiece, and the prepared cavity was wiped with cotton moistened with sodium hypochlorite. The composite was applied directly with a total-etch bonding system. In the ICRR group, an impression for the prepared cavity was taken using a silicon-based material, and the restoration was adhesive with self-adhesive resin cement. The child’s satisfaction with each of the two application techniques was assessed through the scale FACES. Restorations were evaluated during follow-up periods (3, 6, and 12 months) according to Modified USHPH criteria.ResultsThe clinical success rate was 90% in the ICRR group versus 85% in the DCRR group after 12 months of follow-up without statistically significant differences (P = 0.218). Children were significantly more satisfied (P = 0.0351) with ICRR than DCRR.ConclusionsBoth DCRR and ICRR can be considered effective restorations with acceptable clinical performance in the restoration of hypomineralised first permanent molars with an advantage of ICRR in terms of child acceptance of the restoration application technique.

Is surface roughness of direct resin composite restorations material and polisher-dependent? A systematic review.

Direct resin composite bonding offers a highly esthetic, minimally invasive option for the treatment of anterior teeth however the challenge to improve their longevity remains. Direct resin composite restorations are limited by the risk of staining which may be influenced by the final surface roughness (Ra) of composite achieved. The purpose of this review is to investigate, using a systematic approach, whether the final surface roughness of anterior composite restorations is affected by the interaction between resin composite and polishing systems. The review was conducted by 3 independent reviewers and included articles published up to January 21, 2021. Three electronic databases were searched: Medline, Embase, and Web of Science. Studies assessing a quantitative effect of polishing methods on the Ra of direct composite resin materials published after the year 2000 and restricted to the English language were included. The database search for the effect of polishing systems on composite materials retrieved 125 eligible studies. Twelve duplicate records were removed. The resulting records were screened using title and abstract leading to 38 reports which were sought for retrieval. Application of eligibility criteria led to 11 studies included in the review. Hand searching of these studies yielded no additional papers. There is insufficient evidence to determine whether combination of composite and polisher influences final Ra. More research is required to determine if there is an optimum combination of polisher and composite. Polishing should be completed following planned finishing procedures. The approximation to the final surface and which finishing burs to use, if any, should be considered when planning a restoration. Durafill VS predictably achieves an acceptable Ra by different polishers.