Direct Interconversion Research Articles

Electrochemical Reactivity of Hydrogen Storage Materials: Exploring Borohydride and Hydrazinium Salt Mixtures

Electrochemical characterization of hydrogen storage materials was conducted in a non-aqueous environment to investigate the direct electrochemical release and consumption of hydrogen and the potential for regeneration. We first address the challenge of minimal solubility of the synthetic precursors, sodium borohydride (NaBH4) and hydrazinium bromide (N2H5Br), in both organic and inorganic solvents. We next determine and calibrate a reference electrode formulation compatible with our non-aqueous media and analytes that demonstrates a stable reference potential. We employ cyclic voltammetry (CV) to characterize the precursors and mixtures thereof. Each CV peak is assigned to a corresponding electrochemical reaction. Using the rate-dependent CV method and Randles–Ševčík equation, we calculate the diffusion coefficient of each chemical (NaBH4 and N2H5Br). Analysis of the CVs, coupled with 11B NMR analysis, reveals a room temperature chemical transformation of NaBH4 and N2H5Br mixtures into hydrazine borane (N2H4BH3). These results are particularly significant, considering the limited information available on the electrochemical characterization of metal borohydride and hydrazinium salt in non-aqueous media. This work establishes a foundation for adapting a non-aqueous electrochemical system to further study the borohydride family of chemistries and to design and develop electrochemical devices for direct electrical and chemical energy interconversion with hydrogen storage materials.

Light-Induced Electron Transfer in a [NiFe] Hydrogenase Opens a Photochemical Shortcut for Catalytic Dihydrogen Cleavage.

[NiFe] hydrogenases catalyze the reversible cleavage of molecular hydrogen into protons and electrons. Here, we have studied the impact of temperature and illumination on an oxygen-tolerant and thermostable [NiFe] hydrogenase by IR and EPR spectroscopy. Equilibrium mixtures of two catalytic [NiFe] states, Nia-C and Nia-SR'', were found to drastically change with temperature, indicating a thermal exchange of electrons between the [NiFe] active site and iron-sulfur clusters of the enzyme. In addition, IR and EPR experiments performed under illumination revealed an unusual photochemical response of the enzyme. Nia-SR'', a fully reduced hydride intermediate of the catalytic cycle, was found to be reversibly photoconverted into another catalytic state, Nia-L. In contrast to the well-known photolysis of the more oxidized hydride intermediate Nia-C, photoconversion of Nia-SR'' into Nia-L is an active-site redox reaction that involves light-driven electron transfer towards the enzyme's iron-sulfur clusters. Omitting the ground-state intermediate Nia-C, this direct interconversion of these two states represents a potential photochemical shortcut of the catalytic cycle that integrates multiple redox sites of the enzyme. In total, our findings reveal the non-local redistribution of electrons via thermal and photochemical reaction channels and the potential of accelerating or controlling [NiFe] hydrogenases by light.

Insight from Electrochemical Analysis in the Radical Cation State of a Monopyrrolotetrathiafulvalene-Based [2]Rotaxane.

Mechanically interlocked molecules are a class of compounds used for controlling directional movement when barriers can be raised and lowered using external stimuli. Applied voltages can turn on redox states to alter electrostatic barriers but their use for directing motion requires knowledge of their impact on the kinetics. Herein, we make the first measurements on the movement of cyclobis(paraquat-p-phenylene) (CBPQT4+) across the radical-cation state of monopyrrolotetrathiafulvalene (MPTTF) in a [2]rotaxane using variable scan-rate electrochemistry. The [2]rotaxane is designed in a way that directs CBPQT4+ to a high-energy co-conformation upon oxidation of MPTTF to either the radical cation (MPTTF⋅+) or the dication (MPTTF2+). 1HNMR spectroscopic investigations carried out in acetonitrile at 298 K showed direct interconversion to the thermodynamically more stable ground-state co-conformation with CBPQT4+ moving across the oxidized MPTTF2+ electrostatic barrier. The electrochemical studies revealed that interconversion takes place by movement of CBPQT4+ across both the MPTTF•+ (19.3 kcal mol-1) and MPTTF2+ (18.7 kcal mol-1) barriers. The outcome of our studies shows that MPTTF has three accessible redox states that can be used to kinetically control the movement of the ring component in mechanically interlocked molecules.

Complementary environmental analysis and functional characterization of lower glycolysis-gluconeogenesis in the diatom plastid.

Organic carbon fixed in chloroplasts through the Calvin-Benson-Bassham Cycle can be diverted toward different metabolic fates, including cytoplasmic and mitochondrial respiration, gluconeogenesis, and synthesis of diverse plastid metabolites via the pyruvate hub. In plants, pyruvate is principally produced via cytoplasmic glycolysis, although a plastid-targeted lower glycolytic pathway is known to exist in non-photosynthetic tissue. Here, we characterized a lower plastid glycolysis-gluconeogenesis pathway enabling the direct interconversion of glyceraldehyde-3-phosphate and phospho-enol-pyruvate in diatoms, ecologically important marine algae distantly related to plants. We show that two reversible enzymes required to complete diatom plastid glycolysis-gluconeogenesis, Enolase and bis-phosphoglycerate mutase (PGAM), originated through duplications of mitochondria-targeted respiratory isoforms. Through CRISPR-Cas9 mutagenesis, integrative 'omic analyses, and measured kinetics of expressed enzymes in the diatom Phaeodactylum tricornutum, we present evidence that this pathway diverts plastid glyceraldehyde-3-phosphate into the pyruvate hub, and may also function in the gluconeogenic direction. Considering experimental data, we show that this pathway has different roles dependent in particular on day length and environmental temperature, and show that the cpEnolase and cpPGAM genes are expressed at elevated levels in high-latitude oceans where diatoms are abundant. Our data provide evolutionary, meta-genomic, and functional insights into a poorly understood yet evolutionarily recurrent plastid metabolic pathway.

Re‐Doped p‐Type Thermoelectric SnSe Polycrystals with Enhanced Power Factor and High ZT > 2

AbstractThermoelectric technology enables the direct interconversion between heat and electricity. SnSe has received increasing interest as a new promising thermoelectric compound due to its exceptionally high performance reported in crystals. SnSe possesses intrinsic low thermal conductivity as a congenital advantage for thermoelectric, but high thermoelectric performance can be hardly achieved due to the difficulty to realize efficient doping to raise its low carrier concentration to an optimal level. In this work, it is found that a series of rare earth elements are effective dopants for SnSe, which can greatly improve the electrical transport properties of p‐type polycrystalline SnSe. In particular, the remarkable enhancement in electrical conductivity and power factor is achieved by Na/Er co‐doping at 873 K. The lattice thermal conductivity is reduced due to the presence of abundant defects (dislocations, stacking faults, and twin boundaries). Consequently, a peak thermoelectric figure of merit ZT (2.1) as well as a high average ZT (0.77) are achieved in polycrystalline SnSe.

Aqueous OH-/H+ dual-ion gradient assisted electricity effective electro-organic synthesis of 2,5-furandicarboxylic acid paired with hydrogen fuel generation.

The OH-/H+ dual-ion gradient has a hidden electromotive force of 0.82V under standard conditions; however, its non-redox nature completely prevents its direct interconversion as electrical driving force. We show by using organic molecules whose heterogeneous electron transfer is pH dependent, OH-/H+ dual-ion energy can be directly harvested as electrical driving force for performing simultaneous electro-organic synthesis and hydrogen fuel production in an electricity effective manner. To demonstrate this dual-ion gradient assisted electro-organic synthesis, 5-hydroxymethylfurfural (HMF) is chosen as the model molecule because of the immense techno commercial applications of its oxidized products. This dual-ion assisted device only required∼1V to provide a current density of 50mA/cm2 and for achieving the same rate; the traditional state-of-the-art electrolytic cell required a doubling of the applied potential. The dual-ion gradient assisted device can convert biomass-derived HMF to economically important FDCA with∼90% yield and∼87% Faradaic efficiency with simultaneous H2 fuel production at a potential as low as 1V.

Direct Deaminative Functionalization.

Selective functional group interconversions in complex molecular settings underpin many of the challenges facing modern organic synthesis. Currently, a privileged subset of functional groups dominates this landscape, while others, despite their abundance, are sorely underdeveloped. Amines epitomize this dichotomy; they are abundant but otherwise intransigent toward direct interconversion. Here, we report an approach that enables the direct conversion of amines to bromides, chlorides, iodides, phosphates, thioethers, and alcohols, the heart of which is a deaminative carbon-centered radical formation process using an anomeric amide reagent. Experimental and computational mechanistic studies demonstrate that successful deaminative functionalization relies not only on outcompeting the H-atom transfer to the incipient radical but also on the generation of polarity-matched, productive chain-carrying radicals that continue to react efficiently. The overall implications of this technology for interconverting amine libraries were evaluated via high-throughput parallel synthesis and applied in the development of one-pot diversification protocols.

Cover Picture: Decarboxylative Sulfinylation Enables a Direct, Metal‐Free Access to Sulfoxides from Carboxylic Acids (Angew. Chem. Int. Ed. 43/2022)

Decarboxylative sulfinylation is reported by Oleg V. Larionov and co-workers in their Research Article (e202210525), as illustrated in the cover picture. The reaction is enabled by radicalophilic reactivity of the sulfinyl sulfones shown in the top left that is distinct from the known dissociation and nucleophilic substitution pathways. Given the importance of carboxylic acids and sulfoxides for medicinal chemistry, agroscience, and organic synthesis, decarboxylative sulfination addresses the unmet need for a direct interconversion between the two functional groups and provides access to new sulfoxide chemical space. Decarboxylative sulfinylation is reported by Oleg V. Larionov and co-workers in their Research Article (e202210525), as illustrated in the cover picture. The reaction is enabled by radicalophilic reactivity of the sulfinyl sulfones shown in the top left that is distinct from the known dissociation and nucleophilic substitution pathways. Given the importance of carboxylic acids and sulfoxides for medicinal chemistry, agroscience, and organic synthesis, decarboxylative sulfination addresses the unmet need for a direct interconversion between the two functional groups and provides access to new sulfoxide chemical space. Coordination Chemistry Bioanalytics Microporous Materials

Anderson transition in stoichiometric Fe2VAl: high thermoelectric performance from impurity bands

Discovered more than 200 years ago in 1821, thermoelectricity is nowadays of global interest as it enables direct interconversion of thermal and electrical energy via the Seebeck/Peltier effect. In their seminal work, Mahan and Sofo mathematically derived the conditions for ’the best thermoelectric’—a delta-distribution-shaped electronic transport function, where charge carriers contribute to transport only in an infinitely narrow energy interval. So far, however, only approximations to this concept were expected to exist in nature. Here, we propose the Anderson transition in a narrow impurity band as a physical realisation of this seemingly unrealisable scenario. An innovative approach of continuous disorder tuning allows us to drive the Anderson transition within a single sample: variable amounts of antisite defects are introduced in a controlled fashion by thermal quenching from high temperatures. Consequently, we obtain a significant enhancement and dramatic change of the thermoelectric properties from p-type to n-type in stoichiometric Fe2VAl, which we assign to a narrow region of delocalised electrons in the energy spectrum near the Fermi energy. Based on our electronic transport and magnetisation experiments, supported by Monte-Carlo and density functional theory calculations, we present a novel strategy to enhance the performance of thermoelectric materials.

Dynamic interaction of BRCA2 with telomeric G-quadruplexes underlies telomere replication homeostasis

BRCA2-deficient cells precipitate telomere shortening upon collapse of stalled replication forks. Here, we report that the dynamic interaction between BRCA2 and telomeric G-quadruplex (G4), the non-canonical four-stranded secondary structure, underlies telomere replication homeostasis. We find that the OB-folds of BRCA2 binds to telomeric G4, which can be an obstacle during replication. We further demonstrate that BRCA2 associates with G-triplex (G3)-derived intermediates, which are likely to form during direct interconversion between parallel and non-parallel G4. Intriguingly, BRCA2 binding to G3 intermediates promoted RAD51 recruitment to the telomere G4. Furthermore, MRE11 resected G4-telomere, which was inhibited by BRCA2. Pathogenic mutations at the OB-folds abrogated the binding with telomere G4, indicating that the way BRCA2 associates with telomere is innate to its tumor suppressor activity. Collectively, we propose that BRCA2 binding to telomeric G4 remodels it and allows RAD51-mediated restart of the G4-driven replication fork stalling, simultaneously preventing MRE11-mediated breakdown of telomere.

In-situ synthesis of graphdiyne on Mn3O4 nanoparticles for efficient Zn ions diffusion and storage

Recently, aqueous zinc-ion batteries (ZIBs) have attracted widespread attention owing to their high energy density, low cost, and high security. However, the traditional manganese oxide electrode materials are facing the issues of rapid capacity decay and poor cyclic stability caused by structure collapse. Herein, we report an in-situ chemical synthesis method that enables uniform Mn3O4 nanoparticles to be covered by graphdiyne (GDY) (Mn3O4-GDY). Synergistic advantages have been found in this as-prepared Mn3O4-GDY composite material as a result of the unique conjugated porous chemical structure of GDY and strong interaction with Mn3O4 by acetylenic bond. In the meantime, the buffer space provided by structural pores of GDY effectively sustains the volume change of Mn3O4 in the storage of Zn ions. In particular, due to the interaction with GDY, a direct interconversion of the manganese ions from Mn2+ to Mn4+ is achieved instead of the normal conversion from Mn3+ to Mn4+. By electrochemical characterization, it can be found Mn3O4-GDY can obtain a reversible capacity up to 490.3 mAh g−1 at the current density of 50 mA g−1, double times of the theoretical capacity of MnO2. Even at a current density of 600 mA g−1, the reversible capacity is maintained around 200.4 mAh g−1 after 240 cycles. The improved electrochemical performance of the cell with Mn3O4-GDY suggests that this simple synthesis method offers a new avenue for the development of efficient manganese oxide electrode materials.

Total Synthesis of Stemarene and Betaerene Diterpenoids: Divergent Ring-Formation Strategy and Late-Stage C–H Functionalization

A unified protecting group-free approach to two stemarene and two betaerene diterpenoids through a bioinspired two-phase strategy has been developed, and three of them were obtained for the first t...

Seeing atomic-scale structural origins and foreseeing new pathways to improved thermoelectric materials

Thermoelectricity enables the direct inter-conversion between electrical energy and thermal energy, promising for scavenging electric power from sources of waste heat and protecting solid-state refridgerating electronic devices from overheating.

Enantioselective Synthesis of Isocarbostyril Alkaloids and Analogs Using Catalytic Dearomative Functionalization of Benzene.

Enantioselective total syntheses of the anticancer isocarbostyril alkaloids (+)-7-deoxypancratistatin, (+)-pancratistatin, (+)-lycoricidine, and (+)-narciclasine are described. Our strategy for accessing this unique class of natural products is based on the development of a Ni-catalyzed dearomative trans-1,2-carboamination of benzene. The effectiveness of this dearomatization approach is notable, as only two additional olefin functionalizations are needed to construct the fully decorated aminocyclitol cores of these alkaloids. Installation of the lactam ring has been achieved through several pathways and a direct interconversion between natural products was established via a late-stage C-7 cupration. Using this synthetic blueprint, we were able to produce natural products on a gram scale and provide tailored analogs with improved activity, solubility, and metabolic stability.

Ferroelectric polymers exhibiting behaviour reminiscent of a morphotropic phase boundary.

Piezoelectricity-the direct interconversion between mechanical and electrical energies-is usually remarkably enhanced at the morphotropic phase boundary of ferroelectric materials1-4, which marks a transition region in the phase diagram of piezoelectric materials and bridges two competing phases with distinct symmetries1,5. Such enhancement has enabled the recent development of various lead and lead-free piezoelectric perovskites with outstanding piezoelectric properties for use in actuators, transducers, sensors and energy-harvesting applications5-8. However, the morphotropic phase boundary has never been observed in organic materials, and the absence of effective approaches to improving the intrinsic piezoelectric responses of polymers9,10 considerably hampers their application to flexible, wearable and biocompatible devices. Here we report stereochemically induced behaviour in ferroelectric poly(vinylidene fluoride-co-trifluoroethylene) (P(VDF-TrFE)) copolymers, which issimilar to that observed at morphotropic phase boundaries in perovskites. We reveal that compositionally tailored tacticity (the stereochemical arrangement of chiral centres related to the TrFE monomers11,12) can lead to intramolecular order-to-disorder evolution in the crystalline phase and thus to an intermediate transition region that is reminiscent of the morphotropic phase boundary, where competing ferroelectric and relaxor properties appear simultaneously. Our first-principles calculations confirm the crucial role of chain tacticity in driving the formation of this transition region via structural competition between the trans-planar and 3/1-helical phases. We show that the P(VDF-TrFE) copolymer with the morphotropic composition exhibits a longitudinal piezoelectric coefficient of -63.5 picocoulombs per newton, outperforming state-of-the-art piezoelectric polymers10. Given the flexibility in the molecular design and synthesis of organic ferroelectric materials, this work opens up the way for the development of scalable, high-performance piezoelectric polymers.

Graphene oxide (GO) catalyzed transamidation of aliphatic amides: An efficient metal-free procedure

Transamidation involves direct interconversion of an amide with amine, and represents an alternative to the common method of amide formation from the reaction of carboxylic acid with an amine. While the carboxamides have huge potential in biological systems and polymer industries, their formation from carboxylic acids requires activation by a suitable catalyst. A metal-free transamidation of aliphatic amide with aromatic amine catalyzed by graphene oxide (GO) has been developed and established as a general, synthetically useful and selective procedure. Graphene oxide bearing several carboxylic acids on the edges and having large surface area acts as an efficient and recyclable catalyst for transamidation.

Nickel-Catalyzed Decarbonylative Silylation, Borylation, and Amination of Arylamides via a Deamidative Reaction Pathway

A nickel-catalyzed decarbonylative silylation, borylation, and amination of amides has been developed. This new methodology allows the direct interconversion of amides to arylsilanes, arylboronates, and arylamines and enables a facile route for carbon–heteroatom bond formations in a straightforward and mild fashion.

Nickel-Catalyzed C-CN Bond Formation via Decarbonylative Cyanation of Esters, Amides, and Intramolecular Recombination Fragment Coupling of Acyl Cyanides.

An efficient nickel-catalyzed decarbonylative cyanation reaction which allows the direct functional-group interconversion of readily available esters into the corresponding nitriles was developed. This reaction successfully offers access to structurally diverse nitriles with high efficiency and excellent functional-group tolerance and provides a good alternative to classical synthetic pathways from diazonium salts or organic halide compounds.

Amide to Alkyne Interconversion via a Nickel/Copper-Catalyzed Deamidative Cross-Coupling of Aryl and Alkenyl Amides.

A nickel-catalyzed deamidative cross-coupling reaction of amides with terminal alkynes as coupling partners was disclosed. This newly developed methodology allows the direct interconversion of amides to alkynes and enables a facile route for C(sp2)-C(sp) bond formation in a straightforward and mild fashion.

Solvent- and Pressure-Induced Phase Changes in Two 3D Copper Glutarate-Based Metal-Organic Frameworks via Glutarate (+gauche ⇄ -gauche) Conformational Isomerism.

Two isoreticular three-dimensional copper(II) glutarate-based pillared-layered metal-organic frameworks (MOFs) with flexible pillars, [Cu2(glu)2(bpa)] and [Cu2(glu)2(bpp)] (bpa = 1,2-bis(4-pyridyl)ethane; bpp = 1,3-bis(4-pyridyl)propane), undergo spontaneous phase changes upon solvent loss at room temperature. Using single-crystal X-ray diffraction analysis (SCXRD), we show that the phase changes result in new narrow-channel forms that experience a large reduction in solvent-accessible volume. Moreover, the [Cu2(glu)2(bpa)] MOF displays a stepped sorption isotherm for the uptake of CO2 at room temperature. This is indicative of reversion of the framework to the wide-channel form under CO2 pressure. Supercritical CO2 was used to isolate the gas-included structures, and by means of SCXRD we were able to determine the positions of the CO2 molecules in the channels of the frameworks. Finally, we report the use of molecular modeling simulations to elucidate the phase-change mechanism, including the energetic changes involved. Structural limitations in both MOFs allow for only direct gauche-gauche enantiomeric interconversion of the glutarate moieties.