Direct-detection Optical OFDM Research Articles

Performance enhancement with geometrically shaped 4/8D-SP-50QAM for DDO-OFDM system

We design the 4-dimensional set-partitioning 50-ary quadrature amplitude modulation (4D-SP-50QAM) and 8D-SP-50QAM with 7 bit/symbol in direct detection optical orthogonal frequency division multiplexing (DDO-OFDM) systems. Quadrant multiplexing (QM) and orthant symmetry (OS) are respectively used to reduce the number of constellation points and the complexity of constellation mapping, while improving system bandwidth utilization. The proposed 8D-SP-50QAM scheme outperforms 4D-SP-50QAM, 4D-OS-64QAM and 4D 128-ary polarization-ring-switching (4D-128PRS) in terms of generalized mutual information (GMI) and bit error rate (BER) performance at various fiber length. In addition, the GMI gain increases gradually with the increase of fiber length, proving that this scheme can effectively improve system capacity and nonlinear tolerance.

Performance analysis of spectrally shaped DDO-OFDM based on nonlinear differential coding and real-valued precoding

This paper presents a cost-effective spectrally shaped quadrature amplitude modulation (SS-QAM) signal in bandwidth limited direct detection optical orthogonal frequency division multiplexing (DDO-OFDM) systems. The concatenation of the nonlinear differential coding (NLDC) and real-valued precoding sequentially implements spectral-shaping and multi-carrier modulation. Real-value discrete cosine transform (DCT) and discrete Hartley transform (DHT) are used to realize the uniform distribution of the fluctuation signal-to-noise ratio (SNR) and reduce the peak-to-average power ratio (PAPR). To broaden the flexibility of constellation mapping and improve the fine granularity of signals, six modulation formats are analyzed and evaluated in DDO-OFDM systems. Results show that SS-QAM is superior to uniformly distributed QAM in terms of reducing bit error rate (BER) and increasing normalized generalized mutual information (NGMI). Compared to the uniform 25/36/49/64/81/100 QAM OFDM signal, when the transmission distance is 20 km, SS-25/36/49 QAM signal can achieve error free transmission and SS-64/81/100 QAM can achieve 0.9971/1.0037/1.0255 Q-factor improvement and 0.0009/0.0014/0.0015 NGMI gain. When the transmission distance is 50 km, SS-25/36/49/64/81/100 QAM can achieve 0.4182/0.5169/0.9311/0.9988/1.0216/1.1487 Q-factor improvement and 0.0004/0.0008/0.0031/0.0043/0.0066/0.0083 NGMI gain. When the transmission distance is 80 km, SS-25/36/49/64/81/100 QAM can achieve 0.4754/0.7486/1.181/1.2012/1.2302/1.3904 Q-factor improvement and 0.0015/0.0046/0.0108/0.0152/0.0172/0.0205 NGMI gain. In addition, the Q-factor and NGMI gain increases as the fiber length increases, which verifies that the presented scheme is robust to the nonlinear effect.

Optimized intensity-modulated type PTS-based PAPR reduction scheme for intensity-modulated direct-detection optical OFDM systems.

High peak-to-average power ratio (PAPR) of the signal is a major drawback in optical orthogonal frequency division multiplexing (OFDM) system. In this paper, an intensity-modulated type Partial Transmit Sequences (PTS) based scheme is proposed and applied to the intensity-modulated OFDM (IMDD-OFDM) system. The proposed intensity-modulated type PTS (IM-PTS) scheme ensures that the time-domain signal output by the algorithm is real value. What's more, the complexity of the IM-PTS scheme has been reduced without much performance penalty. A simulation is performed to compare the PAPR of different signal. In the simulation, the PAPR of OFDM signal is reduced from 14.5 dB to 9.4 dB at 10-4 probability. We also compare the simulation results with another algorithm based on the PTS principle. A transmission experiment is conducted in a seven-core fiber IMDD-OFDM system at a rate of 100.8Gbit/s. The Error Vector Magnitude (EVM) of received signal is reduced from 9 to 8 at -9.4dBm received optical power. Furthermore, the experiment result shows that the reduction of complexity has little performance impact. The optimized intensity-modulated type PTS (O-IM-PTS) scheme effectively increases the tolerance of the nonlinear effect of the optical fiber and reduces the requirement for linear operating range of optical device in the transmission system. During the upgrade process of the access network, there is no need to replace the optical device in the communication system. What's more, the complexity of PTS algorithm has been reduced, which lower data processing performance requirements of the devices such as ONU and OLT. As a result, the cost of network upgrades is reduced a lot.

Symbol-interleaved precoding technique for DDO-OFDM systems with the KK receiver.

Receiver sensitivity of direct-detection optical orthogonal frequency-division multiplexing (DDO-OFDM) systems can be significantly improved by using the Kramers-Kronig (KK) receiver. However, the KK algorithm is sensitive to the high signal-to-average power ratio (PAPR) of the OFDM signal, which may violate the minimum phase condition (MPC) and lead to severe signal distortions during the optical field reconstruction. Channel-independent discrete Fourier transform (DFT) precoding technique can efficiently reduce the PAPR and realize subcarrier signal-to-noise ratio (SNR) equalization, but the PAPR of the precoded signal will increase due to chromatic dispersion. Besides, the relevant researches exhibit that it is hard to accurately reconstruct the complex field from the sampled signals based on KK relation at the low carrier-to-signal power ratio (CSPR) even if the MPC is satisfied. To combat the signal distortions induced by the KK algorithm and improve the bit error rate (BER) performance, we propose and verify DFT/Walsh-Hadamard transform (WHT)-based precoding with a simple symbol-interleaving technique for DDO-OFDM transmission systems. In addition to PAPR reduction, the proposed technique can equalize both subcarrier and inter-symbol SNRs efficiently. The simulated results show that the BER performance can be improved by up to one order of magnitude at a CSPR of 6 dB after up to 1000km single-mode fiber transmission, compared to the conventional DFT precoding technique. It is expected that the proposed technique can be employed to improve the receiver sensitivity of medium-reach DDO-OFDM transmission systems with the KK receiver.

Experimental Demonstration of Constant-Envelope OFDM to Reduce Intermodulation Impairments and Increase Robustness Against Fiber Nonlinearities

Direct detection optical orthogonal frequency division multiplexing (DDO-OFDM) systems have been proposed as a well-suited solution for cost-sensitive applications, but also for metro/regional optical links. In this article, we experimentally demonstrate tolerance enhancements of constant-envelope OFDM (CE-OFDM) signals towards Mach–Zehnder modulator (MZM) intermodulation impairments and fiber nonlinear Kerr effects. The additional tolerance is achieved by the reduced peak-to-average power ratio (PAPR) of CE-OFDM signals, unlike conventional OFDM signals that inherently possess high PAPR values and therefore, are prone to distortions induced by the above-mentioned impairments. The experiments show that the transmission of CE-OFDM signals with PAPR <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">$=3$</tex-math></inline-formula> dB over 1000 km of dispersion-uncompensated standard single-mode fiber (SSMF) is successfully accomplished. The proper choice of the MZM bias point, as well as the electrical phase modulation index, provides link length enlargements at the same bit error rate. An enlargement around 320 km of SSMF was achieved with an optical launch power of 10 dBm and with a guard-band of <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">$\approx 16\%$</tex-math></inline-formula> of the signal bandwidth when compared to conventional DDO-OFDM systems.

Simple blind estimation of sampling frequency offset for real-time asynchronous DDO-OFDM system

Sampling frequency offset (SFO) will result in phase rotation, inter-channel interference, and inter-symbol interference, which can seriously degrade the transmission performance of the asynchronous direct-detection optical OFDM (DDO-OFDM). In this paper, we study a simple and overhead-free SFO blind estimation technique in a DDO-OFDM system. The key parameters in this technique are optimized by theoretical analysis, numerical simulation, and experiments. A simplified method of the SFO blind estimation is also proposed to further reduce the hardware implementation complexity. The accuracy and stability of the SFO estimation are experimentally investigated in the real-time asynchronous DDO-OFDM transmission system. The results indicate that the SFO estimation accuracy can be within ±1.5 ppm and shows high stability even at an SFO of up to 200 ppm after 20-km standard single-mode fiber transmission.

High-Speed DD Transmission Using a Silicon Receiver Co-Integrated With a 28-nm CMOS Gain-Tunable Fully-Differential TIA

We report >100-Gb/s direct-detection (DD) transmission using an integrated silicon optical receiver, which comprised a fully-differential 28-nm complementary metal-oxide-semiconductor (CMOS) transimpedance amplifier (TIA) wire-bonded to a Silicon-Germanium (SiGe) balanced photodiode (PD). The fully-differential TIA architecture enabled significant bit-error-rate (BER) and signal-to-noise ratio improvements over a single-output TIA design when introducing it to the DD transmission. We experimentally validated its effectiveness in both back-to-back (B2B) and 2-km long standard single-mode fibre (SSMF) links using 50/100-Gb/s signals, including Nyquist on-off keying (OOK), Nyquist 4-ary pulse amplitude modulation (PAM4), uniformly-loaded DD optical orthogonal frequency division multiplexing (DDO-OFDM) and adaptively-loaded DDO-OFDM. Furthermore, we demonstrate that the integrated optical receiver was capable of balancing the trade-off between its electrical bandwidth and transimpedance gain by simply adjusting a voltage supply to the TIA. Without the need for optical amplification and while keeping the BERs below the 7% forward error correction limit, up to 173.22-Gb/s and 139.86-Gb/s adaptively-loaded DDO-OFDM transmission was achieved for B2B and 2-km transmission, respectively. The demonstrated results highlight the potential of the integrated silicon optical receiver, fabricated using the standard CMOS process for high-speed and short-reach optical interconnects.

A Simple Nonlinear Companding Transfrom for Nonlinear Compensation of Direct-Detection Optical OFDM Systems

In direct-detection OFDM systems, the nonlinear effects caused by optical modulation and fiber transmission can degrade the system performance severely. In this study, we propose a new nonlinear companding transform to improve the performance of direct detection optical OFDM transmission systems. The demonstration is realized by Monte-Carlo simulation of the intensity modulation and direct-detection DCO-OFDM optical transmission system at 40 Gbps over a 80 km of standard single mode fiber link. The influence of the companding parameters on the performance of system in different nonlinear transmission conditions has been investigated via simulation.

Blind Adaptive Low-Complexity Time-Domain Equalizer for 100-Gb/s Direct-Detection Optical OFDM Systems Over Long-Reach SSMF

In this article, we report a low-complexity blind adaptive time-domain equalizer (TEQ) to reduce the cyclic prefix (CP) length for 100-Gb/s direct-detection optical orthogonal frequency-division multiplexing (OFDM) system combined with wavelength-division multiplexing system over 400-km standard single-mode fiber length. We show that a significant complexity reduction can be achieved by designing a modified cost function of multicarrier equalization based on orthogonality restoration (MERO) algorithm on one hand, and on deploying the symmetrical TEQ property on the other hand. Our article shows that the reduction of the system adaptation complexity can be realized up to 50% when designing and optimizing the stated system parameters. Our low-complexity MERO simulation model exhibits better performance, for a shorter CP length equal to $0.39$ % of the OFDM symbol duration, than the existing conventional algorithms in term of bit error rate versus optical signal-to-noise ratio with a much lower complexity.

Optical Back-Propagation for Nonlinear Compensation in OFDM-Based Long Range-Passive Optical Networks

In direct-detection optical OFDM system, the nonlinear impairment is the key factor that limits the system performance. The back-propagation techniques in digital and optical domains have been proposed to compensate the nonlinear effects, however they can be unsuitable for long-range passive optical networks (LR-PONs) due to their implementation at receiver. In this study, we propose an optical back propagation (OBP) approach for compensation of the nonlinear and dispersion distortions in direct-detection optical OFDM system. The proposed OBP using split-step Fourier method is implemented at transmitter that is suitable for high-rate OFDM-based LR-PONs applications. In this OBP, the fiber Bragg grating (FBG) is used as a step for dispersion compensation and the high-nonlinear fiber (HNLF) with a short length is used as a step for nonlinear compensation. The performance improvement based on our proposed approach has been demonstrated via Monte-Carlo simulations of the 100 Gbit/s direct-detection optical OFDM system with 80 km of standard single mode fiber link. The influence of optical conjugation process and launching conditions has been investigated. The obtained results show that the proposed OBP can improve remarkably the performance of system with the launched power range from -2 dBm to 6 dBm.

Hardware-efficient implementation and experimental demonstration of Hermitian-symmetric IFFT for optical DMT transmitter.

Optical discrete multi-tone (DMT) is one type of direct-detection optical orthogonal frequency-division multiplexing (DDO-OFDM), and it is more suitable for cost-sensitive access networks and optical interconnections due to its simple structure. In DMT transmitter, inverse fast Fourier transform (IFFT) is an essential function for achieving OFDM modulation, and its input data are constrained to have Hermitian symmetry (HS). To support high-speed DMT signal generation, a fully-parallel implementation of IFFT is preferable. However, the hardware implementation of the conventional complex-valued IFFT (CC-IFFT) requires large area and has high power consumption. Based on the nature of HS, we design and implement a fully-parallel pipelined 128-point radix-2 decimation-in-time Hermitian-symmetric IFFT (HS-IFFT) by using a single field programmable gate array (FPGA) chip. On-chip resource utilization is analyzed for both the proposed HS-IFFT and CC-IFFT. It exhibits that the HS-IFFT can save up to 35% multipliers, 49% registers and 43% look-up tables (LUTs) compared to the CC-IFFT. Also, by using the HS-IFFT and CC-IFFT, two FPGA-based real-time baseband DMT transmitters are implemented and power consumption is estimated. More than 32% of on-chip power is saved by using the HS-IFFT. Moreover, the two DMT transmitters are also experimentally demonstrated in a short-reach directly-modulated laser (DML)-based optical DMT system. The experimental results show that the HS-IFFT-DMT has the same bit error rate (BER) and error vector magnitude (EVM) performances as the CC-IFFT-DMT in both electrical/optical back-to-back cases (EB2B/OB2B) and post 20-km single-mode fiber (SMF) transmission.

Online digital offset mismatch compensation for high-speed time-interleaved ADC in real-time optical OFDM receiver.

The time-interleaved analog-to-digital converter (TI-ADC) is a good option to realize high-speed data conversion for both single-carrier and multi-carrier optical communication systems. Offset mismatch is one of its drawbacks, which causes distortion in the sampled data and degrades the bit error rate (BER) performance of communication systems. In this article, a low-complexity online digital offset mismatch compensation (OMC) scheme based on time-domain averaging is proposed and implemented with a commercial off-the-shelf field programmable gate array (FPGA) chip for high-speed optical OFDM communications. The proposed OMC scheme is experimentally demonstrated in real-time direct-detection optical OFDM receiver with a 5 GS/s TI-ADC. The experimental results show that the BER performance can be improved by more than an order of magnitude, by using the proposed OMC scheme, for both 16- and 64-QAM modulation formats. The receiver sensitivity can be improved by more than 5-dB in terms of the received optical power at the BER of 1e-3. What's more, the real-time measured BER performance is similar to that of by using offline DSP approaches and has good stability during the measurement period. Numerical simulations are performed under additive white Gaussian noise (AWGN) channel to fully verify the performance of the OMC scheme. It exhibits that the error floor in BER performance can be eliminated by using the OMC scheme and a negligible signal-to-noise ratio (SNR) penalty can be achieved compared with that of offset mismatch-free case.

Efficient Blind Adaptive CSE to Reduce Cyclic Prefix Length in Direct Detection Optical OFDM Systems

Abstract Direct detection optical orthogonal frequency division multiplexing (DDO-OFDM) systems for a long-reach of standard single mode fiber (SSMF) require a large length of cyclic prefix (CP) to avoid the inter-symbol interference (ISI) effect caused by group velocity dispersion (GVD). Unfortunately, this method is inefficient due to the energy wasted in CP samples. In order to reduce the CP length and to mitigate the residual ISI, a novel blind adaptive channel shortening equalizer (CSE) is proposed in this paper. Based on the orthogonality between subcarriers in the fast Fourier transform (FFT) property, the proposed algorithm attempts to minimize the sum-squared correlation (SSCM) between each sample located in a well-defined window to update the CSE coefficients. Thus, the combined channel-CSE response is shortened. Therefore, it can cancel the residual ISI effect due to the GVD and the short CP length. The performance of the system is evaluated on basis of bit error rate (BER) versus optical signal to noise ratio (OSNR) for different CP lengths. The simulation results validate the new algorithm SSCM and show that it can reduce the CP length with a much better system improvement than existing algorithms.

Bit-interleaved polar coded modulation scheme for high-order QAM encoded DDO-OFDM systems

Abstract In the paper, a simple generation scheme of the twin-SSB-OFDM signal based on one OFDM transmitter is proposed in the direct-detection optical orthogonal frequency-division multiplexing (DDO-OFDM) system. Compared with traditional generation scheme that requires two OFDM transmitters, it has lower implementation complexity and lower cost. In addition, to enhance the spectral efficiency (SE) for DDO-OFDM system, an efficient bit-interleaved polar coded modulation (BIPCM) scheme adopting 256 quadrature-amplitude modulation (256-QAM) is proposed. Moreover, a quadratic polynomial permutation (QPP) interleaver is adopted for polar coded modulation (PCM) to further improve the overall system performance. The simulation results exhibit that the proposed scheme can achieve more than 4 dB and 5 dB Q-factor improvement compared to the conventional schemes with PCM and without BIPCM, respectively. At the same time, aided by the efficient 256-QAM BIPCM scheme, the receiver sensitivity is improved and the laser linewidth requirement is less strict compared to the conventional schemes.

Inter-Symbol Differential Detection-Enabled Sampling Frequency Offset Compensation for DDO-OFDM

Sampling frequency offset (SFO) between digital-to-analog converters and analog-to-digital converters will seriously degrade the receiver performance of the asynchronous direct-detection optical OFDM (DDO-OFDM), due to the SFO-induced inter-symbol interference, inter-channel interference, and phase rotation. In this letter, a simple and overhead-free SFO compensation scheme enabled by inter-symbol differential detection (ISDD) is proposed and experimentally demonstrated in a short-reach and low-cost directly modulated laser-based DDO-OFDM system with an optimal fast Fourier transform size. The experimental results exhibit that the SFO up to ±200 ppm can be compensated with acceptable error vector magnitude (EVM) penalties after 20-km standard single-mode fiber transmission. Moreover, the EVM performance can be further enhanced by using a decision-aided residual phase compensation method after ISDD when SFO is large.

Theoretical and Experimental Investigation of Direct Detection Optical OFDM Systems with Clipping and Normalization

A data clipping and normalization technique is employed to improve the performance of the overall direct detection optical orthogonal frequency division multiplexing (DCO-OFDM) system. A detailed analysis of clipping distortion introduced by digital clipping and normalization is provided. The normalization operation amplifies the clipped data signal to the maximum input amplitude of a digital-to-analog converter (DAC). Based on the analysis, a BER formula of the proposed scheme is derived over the AWGN channel and single fiber channel. Performance of an optical clipped OFDM with normalization is assessed through numerical simulations and Monte Claro simulation over the AWGN channel. Theoretical analysis and simulation results both show that the clipping and normalization scheme can greatly improve the BER of an optical OFDM. In particular, BER performance of the proposed transmission scheme was measured in a practical OFDM transmission platform. The measured experimental results show that the clipped and amplified OFDM signal exhibits superior performance in comparison with the conventional OFDM signal. The received sensitivity at a BER of 10−3 for a 4 Gsamples/s (2.6667 Gbits/s) clipped and normalized OFDM signal with clipping ratio of 4 after 100 km standard single-mode fiber (SMF) transmission was improved by 4.3 dB when compared with the conventional OFDM system. The measured results also showed that the clipped OFDM signal exhibits superior performance in comparison with the conventional OFDM signal. Therefore, a clipping and normalization at the transmitter is most effective, and a substantial performance improvement can be obtained by a simple normalization after clipping.

Performance analysis of direct detection optical OFDM systems

Orthogonal frequency division multiplexing (OFDM) is a multicarrier modulation technique, in which the data information is carried over many lower rate subcarriers. This technique is started effectively using in both line communication and wireless communication systems. This modulation technique has been actively started in the field of light wave communication called optical OFDM (OOFDM) system. OOFDM is a multicarrier modulation technique; it is used to overcome the problem of inter-symbol interference due to the chromatic dispersion and polarization mode dispersion of the fiber channel. In this paper, we have done simulation on direct detection optical OFDM (DDOOFDM) system with data rate of 10Gbps and measuring performance analysis of DDOOFDM system with respect to the received optical power and various full width half maximum value of the continuous wave laser source. This analysis is simulated using RSOFT Design Group OptSim Version-5.2.

Hybrid PAPR reduction scheme with Huffman coding and DFT-spread technique for direct-detection optical OFDM systems

Abstract High peak-to-average power ratio (PAPR) of the transmit signal is a major drawback in optical orthogonal frequency division multiplexing (OOFDM) system. In this paper, we propose and experimentally demonstrate a novel hybrid scheme, combined the Huffman coding and Discrete Fourier Transmission-Spread (DFT-spread), in order to reduce high PAPR in a 16-QAM short-reach intensity-modulated and direct-detection OOFDM (IMDD-OOFDM) system. The experimental results demonstrated that the hybrid scheme can reduce the PAPR by about 1.5, 2, 3 and 6 dB, and achieve 1.5, 1, 2.5 and 3 dB receiver sensitivity improvement compared to clipping, DFT-spread and Huffman coding and original OFDM signals, respectively, at an error vector magnitude (EVM) of −10 dB after transmission over 20 km standard single-mode fiber (SSMF). Furthermore, the throughput gain can be of the order of 30% by using the hybrid scheme compared with the cases of without applying the Huffman coding.

Performance enhanced DDO-OFDM system with adaptively partitioned precoding and single sideband modulation.

As a promising solution for short-to-medium transmission systems, direct detection optical orthogonal frequency division multiplexing (DDO-OFDM) or discrete multi-tone (DMT) has been intensively investigated in last decade. Benefitting from the advantages of peak-to-average power (PAPR) reduction and signal-to-noise ratio (SNR) equalization, precoding techniques are widely applied to enhance the performance of DDO-OFDM systems. However, the conventional method of partitioning precoding sets limits the ability of precoding schemes to optimize the SNR variation and the allocation of modulation formats. Thus, the precoding transmission systems are hard to reach the capacity that traditional bit-power loading (BPL) techniques, like the Levin-Campello (LC) algorithm, can achieve. In this paper, we investigate the principle of SNR variation for precoded DDO-OFDM systems and theoretically demonstrate that the SNR equalization effect of precoding techniques is actually determined by the noise equalization process. Based on this fact, we propose an adaptively partitioned precoding (APP) algorithm to unlock the ability to control the SNR of each subcarrier. As demonstrated by the simulation and experimental results, the proposed APP algorithm achieves the transmission capacity as high as the LC algorithm and has nearly 1 dB PAPR reduction. Besides, the look-up table (LUT) operation ensures low complexity of the proposed APP algorithm compared with LC algorithm. To avoid severe chromatic dispersion (CD) induced spectral fading, single sideband (SSB) modulation is also implemented. We find that SSB modulation can reach the capacity of double sideband (DSB) modulation in optical back-to-back (OB2B) configuration by optimizing the modulation index. Therefore, the APP based SSB-DDO-OFDM scheme can sufficiently enhance the performance of cost-sensitive short-to-medium reach optical fiber communication systems.

Receiver sensitivity improvement in spectrally-efficient guard-band twin-SSB-OFDM using an optical IQ modulator

To further improve receiver sensitivity of spectrally-efficient guard-band direct-detection optical orthogonal frequency-division multiplexing (OFDM) with twin single-side-band (SSB) modulation technique, an optical IQ modulator (IQM) is employed to optimize optical carrier-to-signal power ratio (CSPR). The CSPRs for the guard-band twin-SSB-OFDM signal generated by using dual-drive Mach–Zehnder modulator (DD-MZM) and optical IQM are theoretically analyzed and supported by simulations. The optimal CSPR for the two types of guard-band twin-SSB-OFDM are identified. The simulations exhibit that the error vector magnitude (EVM) performance of the IQM-enabled guard-band twin-SSB-OFDM is improved by more than 4-dB compared to that of the twin-SSB-OFDM enabled by DD-MZM after 80-km single-mode fiber (SMF) transmission. In addition, more than 3-dB and 10 dB receiver sensitivity improvements in terms of received optical power (ROP) and optical signal-to-noise ratio (OSNR) are also achieved, respectively.