Direct DNA Delivery Research Articles

Fusiform nanoparticle boosts efficient genetic transformation in Sclerotinia sclerotiorum

BackgroundSclerotinia sclerotiorum is a highly destructive phytopathogenic fungus that poses a significant threat to a wide array of crops. The current constraints in genetic manipulation techniques impede a thorough comprehension of its pathogenic mechanisms and the development of effective control strategies.ResultsHerein, we present a highly efficient genetic transformation system for S. sclerotiorum, leveraging the use of fusiform nanoparticles, which are synthesized with FeCl3 and 2,6-diaminopyrimidine (DAP). These nanoparticles, with an average longitude length of 59.00 nm and a positively charged surface, facilitate the direct delivery of exogenous DNA into the mycelial cells of S. sclerotiorum, as well as successful integration with stable expression. Notably, this system circumvents fungal protoplast preparation and tedious recovery processes, streamlining the transformation process considerably. Furthermore, we successfully employed this system to generate S. sclerotiorum strains with silenced oxaloacetate acetylhydrolase-encoding gene Ss-oah1.ConclusionsOur findings demonstrate the feasibility of using nanoparticle-mediated delivery as a rapid and reliable tool for genetic modification in S. sclerotiorum. Given its simplicity and high efficiency, it has the potential to significantly propel genetic research in filamentous fungi, offering new avenues for elucidating the intricacies of pathogenicity and developing innovative disease management strategies.Graphical

704/DNA vaccines leverage cytoplasmic DNA stimulation to promote anti-HIV neutralizing antibody production in mice and strong immune response against alpha-fetoprotein in non-human primates

Genetic immunization is an attractive approach for prophylactic and therapeutic vaccination using synthetic vectors to deliver antigen-encoding nucleic acids. Recently, DNA delivered by a physical means or RNA by liposomes consisting of four different lipids demonstrated good protection in human phase III clinical trials and received Drugs Controller General of India and US FDA approval to protect against COVID-19, respectively. However, the development of a system allowing for efficient and simple delivery of nucleic acids while improving immune response priming has the potential to unleash the full therapeutic potential of genetic immunization. DNA-based gene therapies and vaccines have the potential for rapid development, as exemplified by the recent approval of Collategene, a gene therapy to treat human critical limb ischemia, and ZyCoV, a DNA vaccine delivered by spring-powered jet injector to protect against SARS-CoV2 infection. Recently, we reported amphiphilic block copolymer 704 as a promising synthetic vector for DNA vaccination in various models of human diseases. This vector allows dose sparing of antigen-encoding plasmid DNA. Here, we report the capacity of 704-mediated HIV and anti-hepatocellular carcinoma DNA vaccines to induce the production of specific antibodies against gp120 HIV envelope proteins in mice and against alpha-fetoprotein antigen in non-human primates, respectively. An investigation of the underlying mechanisms showed that 704-mediated vaccination did trigger a strong immune response by (1) allowing a direct DNA delivery into the cytosol, (2) promoting an intracytoplasmic DNA sensing leading to both interferon and NF-κB cascade stimulation, and (3) inducing antigen expression by muscle cells and presentation by antigen-presenting cells, leading to the induction of a robust adaptive response. Overall, our findings suggest that the 704-mediated DNA vaccination platform is an attractive method to develop both prophylactic and therapeutic vaccines.

Direct cytosolic delivery of DNA by creating fast closable holes in the cell membrane

Delivering exogenous compounds into cells in vitro or in vivo is a critical yet very challenging step in gene- and cell-based therapies, biomanufacturing, and basic research. Although several nanotechnologies could highly facilitate exogenous compounds into the target cell, they are typically internalized by cells into membrane-bounded endosomes, and most of them are trapped in these endosomes and degraded by endosomes, failing to access the cytosolic cell machinery. Here, we have prepared a copolymer that could target and create fast closable holes in the cell membrane, via which the exogenous genes in nanoparticles can be directly delivered into the cell cytosol, highly bypassing the severe endosome trapping of normal delivery approaches and achieving high gene transfection. Moreover, in cells, the copolymer undergoes fast deboronation to release the absorbed lipid for fast repair of the holes. This cell membrane hole-creating copolymer would provide a very promising means for delivering functional nanoparticles, DNA, RNA, and proteins directly into the cell cytosol, avoiding cargo entrapment in endosomes and maintaining cargo functionality after delivery.

Direct Cellular Delivery of Exogenous Genetic Material and Protein via Colloidal Nano-Assemblies with Biopolymer.

Direct cytosolic delivery of large biomolecules that bypass the endocytic pathways is a promising strategy for therapeutic applications. Recent works have shown that small-molecule, nanoparticle, and polymer-based carriers can be designed for direct cytosolic delivery. It has been shown that the specific surface chemistry of the carrier, nanoscale assembly between the carrier and cargo molecule, good colloidal stability, and low surface charge of the nano-assembly are critical for non-endocytic uptake processes. Here we report a guanidinium-terminated polyaspartic acid micelle for direct cytosolic delivery of protein and DNA. The polymer delivers the protein/DNA directly to the cytosol by forming a nano-assembly, and it is observed that <200 nm size of colloidal assembly with near-zero surface charge is critical for efficient cytosolic delivery. This work shows the importance of size and colloidal property of the nano-assembly for carrier-based cytosolic delivery of large biomolecules.

Protoplast Isolation, Transfection, and Gene Editing for Soybean (Glycine max ).

Protoplast is a versatile system for conducting cell-based assays, analyzing diverse signaling pathways, studying functions of cellular machineries, and functional genomics screening. Protoplast engineering has become an important tool for basic plant molecular biology research and developing genome-edited crops. This system allows the direct delivery of DNA, RNA, or proteins into plant cells and provides a high-throughput system to validate gene-editing reagents. It also facilitates the delivery of homology-directed repair templates (donor molecules) into plant cells, enabling precise DNA edits in the genome. There is a great deal of interest in the plant community to develop these precise edits, as they may expand the potential for developing value-added traits which may be difficult to achieve by other gene-editing applications and/or traditional breeding alone. This chapter provides improved working protocols for isolating and transforming protoplast from immature soybean seeds with 44% of transfection efficiency validated by the green fluorescent protein reporter. We also describe a method for gene editing in soybean protoplasts using single guide RNA molecules.

Perspectives on new opportunities for nano-enabled strategies for gene delivery to plants using nanoporous materials.

Engineered nanocarriers have great potential to deliver different genetic cargos to plant cells and increase the efficiency of plant genetic engineering. Genetic engineering has improved the quality and quantity of crops by introducing desired DNA sequences into the plant genome. Traditional transformation strategies face constraints such as low transformation efficiency, damage to plant tissues, and genotype dependency. Smart nanovehicle-based delivery is a newly emerged method for direct DNA delivery to plant genomes. The basis of this new approach of plant genetic transformation, nanomaterial-mediated gene delivery, is the appropriate protection of transferred DNA from the nucleases present in the cell cytoplasm through the nanocarriers. The conjugation of desired nucleic acids with engineered nanocarriers can solve the problem of genetic manipulation in some valuable recalcitrant plant genotypes. Combining nano-enabled genetic transformation with the new and powerful technique of targeted genome editing, CRISPR (clustered regularly interspaced short palindromic repeats), can create new protocols for efficient improvement of desired plants. Silica-based nanoporous materials, especially mesoporous silica nanoparticles (MSNs), are currently regarded as exciting nanoscale platforms for genetic engineering as they possess several useful properties including ordered and porous structure, biocompatibility, biodegradability, and surface chemistry. These specific features have made MSNs promising candidates for the design of smart, controlled, and targeted delivery systems in agricultural sciences. In the present review, we discuss the usability, challenges, and opportunities for possible application of nano-enabled biomolecule transformation as part of innovative approaches for target delivery of genes of interest into plants.

Progress in Optimization of Agrobacterium-Mediated Transformation in Sorghum (Sorghum bicolor).

This review archives the achievements made in the last two decades and presents a brief outline of some significant factors influencing the Agrobacterium-mediated transformation of Sorghum bicolor. Recently, progress in successful transformation has been made for this particular monocot crop through direct DNA delivery method and indirect method via Agrobacterium. However, lower transformation rate still proved to be a bottleneck in genetic modification of sorghum. An efficient Agrobacterium transformation system could be attained by optimizing the preliminary assays, comprising of explant source, growth media, antibiotics, Agrobacterium strains and agro-infection response of callus. The selection of competent strains for genetic transformation is also one of the key factors of consideration. Successful transformation is highly dependent on genome configuration of selected cultivar, where non-tannin genotype proved the best suited. Immature embryos from the field source have higher inherent adaptation chances than that of the greenhouse source. A higher concentration of Agrobacterium may damage the explant source. Utilization of anti-necrotic treatments and optimized tissue culture timeframe are the adequate strategies to lower down the effect of phenolic compounds. Appropriate selection of culture media vessels at different stages of tissue culture may also assist in a constructive manner. In conclusion, some aspects such as culture environment with medium composition, explant sources, and genotypes play an indispensable role in successful Agrobacterium-mediated sorghum transformation system.

A suicidal strain of Listeria monocytogenes is effective as a DNA vaccine delivery system for oral administration.

In this study we determined the in vivo activity of model ovalbumin vaccines delivered by direct intramuscular delivery of plasmid DNA or oral delivery using a recombinant suicidal Listeria monocytogenes strain (rsΔ2). In a previous report we described how rsΔ2 is capable of delivering luciferase, as protein or DNA, in vitro, into non-dividing intestinal epithelial cells (Kuo et al., 2009). This is achieved by engineering a dual expression shuttle vector, pDuLX-Luc, that replicates in E. coli and rsΔ2 and drives gene expression from the Listeria promoter (Phly) as well as the eukaryotic cytomegalovirus promoter (CMV), thereby delivering both protein and plasmid DNA to the cell cytoplasm. For the current in vivo study rsΔ2 containing pDuLX-OVA was used to deliver both ovalbumin protein and the mammalian expression plasmid by the oral route. Controls were used to investigate the activity of this system versus positive and negative controls, as well as quantifying activity against direct intramuscular injection of expression plasmids. Oral administration of rsΔ2(pDuLX-OVA) produced significant titres of antibody and was effective at inducing targeted T-cell lysis (approximately 30% lysis relative to an experimental positive control, intravenous OVA-coated splenocytes+lipopolysaccharide). Intramuscular injection of plasmids pDuLX-OVA or p3L-OVA (which lacks the prokaryotic promoter) also produced significant CTL-mediated cell lysis. The delivery of the negative control rsΔ2 (pDuLX-Luc) confirmed that the observed activity was induced specifically by the ovalbumin vaccination. The data suggest that the oral activity of rsΔ2(pDuLX-OVA) is explained by delivery of OVA protein, expressed in rsΔ2 from the prokaryotic promoter present in pDuLX-OVA, but transfection of mammalian cells in vivo may also play a role. Antibody titres were also produced by oral delivery (in rsΔ2) of the p3L-OVA plasmid in which does not include a prokaryotic promoter.

Targeted gene exchange in plant cells mediated by a zinc finger nuclease double cut

Genome modification by homology-directed repair (HDR) is an attractive tool for the controlled genetic manipulation of plants. Here, we report the HDR-mediated gene exchange of expression cassettes in tobacco BY-2 cells using a designed zinc finger nuclease (ZFN). The target contained a 7-kb fragment flanked by two ZFN cutting sites. That fragment was replaced with a 4-kb donor cassette, which integrates gene markers for selection (kanamycin resistance) and for scoring targeting (red fluorescent protein, RFP). Candidates resulting from cassette exchange were identified by molecular analysis of calli generated by transformation via direct DNA delivery. The precision of HDR-mediated donor integration was evaluated by Southern blot analysis, sequencing of the integration locus and analysis of RFP fluorescence by flow cytometry. Screening of 1326 kanamycin-resistant calli yielded 18 HDR events, 16 of which had a perfect cassette exchange at the insert junction and 13 of which produced functional RFP. Our results demonstrate that ZFN-based HDR can be used for high frequency, precise, targeted exchange of fragments of sizes that are commercially relevant in plants.

Direct Nuclear Delivery of DNA by Photothermal Nanoblade.

We demonstrate direct nuclear delivery of DNA into live mammalian cells using the photothermal nanoblade. Pulsed laser-triggered cavitation bubbles on a titanium-coated micropipette tip punctured both cellular plasma and nuclear membranes, which was followed by pressure-controlled delivery of DNA into the nucleus. High-level and efficient plasmid expression in different cell types with maintained cell viability was achieved.

DMAEM-based cationic polymers as novel carriers for DNA delivery into cells.

Different transformation systems and vectors have been improved to increase the effectiveness of transformation and achieve stable expression of target genes. Because classical direct and indirect transformation processes commonly suffer from instability of a gene in the environment, gene deletion, transgene silencing, and poor gene transfer efficiency. Nowadays, gene transformation technologies are based on the use of new carriers (nanoparticles, carbon nanotubes, whiskers, and polymers) characterized by better efficiency and reproducibility for the direct DNA delivery into cells. In this review, we have focused on the novel DMAEM-based direct DNA delivery system and its possible applications for cell transformation.

Transfer of a β-glucuronidase marker gene to triticale (xTriticosecale Wittmack) via particle bombardment (biolistic) method

Abstract This study was carried out to investigte the biotechnology laboratory of Department of Field Crops, Ankara University with the aim of investigating the optimum parameters of gene transfer to mature embryo and leaf segment explants of Triticale (x Triticosecale Wittmack) via particle bombardment (Biolistic) method. Mature embryo and leaf segment explants obtained from Triticale (x Triticosecale Wittmack) were bombardment with accelerated gold or tungsten particles coated with the plasmid pBI221.23 containing the b -glucuronidase (GUS: u idA ) marker gene. Different bombardment distances from the stopping plate (6, 9, 12, cm) and different rupture disk pressures (900, 1100, 1550 psi ) were used as physical parameters. Blue cells expressing the b -glucuronidase gene were detected by using a histochemical assay. The variation in the number of blue spots in bombarded explants was used to determine the gene transfer efficiency. The mature embryos of triticale were found to be more amenable for the direct delivery of foreign DNA by the particle bombardment technique than the leaf segments. Also the gold particles were more suitable than tungsten particles in the gene transfer efficiency. The highest gene transfer results were obtained in mature embryos when 6 cm bombardment distance and 1100 psi rupture disk pressure were used.

Nonviral Gene Delivery

INTRODUCTIONModern cell biology increasingly relies on molecular tools to facilitate the study of cellular processes. With the advent of recombinant DNA technology, reverse transcription–polymerase chain reaction (RT-PCR) to amplify almost any gene, and fluorescent proteins that can be fused to any desired target protein, the number and scope of functional studies designed to determine the roles of proteins within cells have exploded. Creating the appropriate fusion protein plasmid is a key step, but the DNA must also be delivered to the cell for expression and function studies. There are several common approaches for delivering DNA, including liposome- and polymer-mediated transfection, electroporation, and direct DNA delivery by microinjection. This article provides an overview of several of these nonviral gene delivery methods, with an emphasis on direct injection of plasmids into cells.

Molecular farming, using the cereal endosperm as bioreactor

Seed is an ideal protein production platform because it is the storage organ of the plant and offers appropriate storage compartments for the deposition of foreign proteins. To achieve high foreign protein expression level in the endosperm tissue, the transformation cassette carried the tissue-specific promoter of the wheat high-molecularweight glutenin subunit protein 1Bx17, fused to the first intron of rice actin promoter. Transformation protocols were established and optimized in the laboratory for cereals such as rice, barley and wheat using direct DNA delivery and the Agrobacterium tumefaciens mediated transformation system. Both immature (barley) and mature (rice) embryos, and immature inflorescences (wheat) were used as sources of explants. Subunit edible vaccines were produced to introduce the LTB, CTB and fused LTB-PEDV genes into the rice genome. The PEDV gene was also integrated into the barley genome. A project has recently been started to produce a rabbit-derived enzyme in transgenic wheat endosperm to be used by the pharmaceutical industry.

Site-specific gene integration technologies for crop improvement

Targeted integration of foreign genes into plant genomes is a much sought-after technology for engineering precise integration structures. Homologous recombination-mediated targeted integration into native genomic sites remained somewhat elusive until made possible by zinc finger nuclease-mediated double-stranded breaks. In the meantime, an alternative approach based on the use of site-specific recombination systems has been developed which enables integration into previously engineered genomic sites (site-specific integration). Follow-up studies have validated the efficacy of the site-specific integration technology in generating transgenic events with a predictable range and stability of expression through successive generations, which are critical features of reliable and practically useful transgenic lines. Any DNA delivery methods can be used for site-specific integration; however, best efficiency is mostly obtained with direct DNA delivery methods such as particle bombardment. Although site-specific integration approach provides unique advantages for producing transgenic plants, it is still not a commonly used method. The present article discusses barriers and solutions for making it readily available to both academic research and applicative use.

Somatic embryogenesis from the axillary meristems of peanut (Arachis hypogaea L.)

Developmental anomalies in the plumule meristem of peanut (Arachis hypogaea L.) somatic embryos resulted in poor shoot differentiation and reduced plant recovery. Existing meristems with caulogenic potential have never been tested for embryogenesis in peanut. The present experiment was designed to test the mature zygotic embryo axis derived plumule with three meristems for somatic embryogenesis. Embryogenic masses and embryos developed from the caulogenic meristems in the axils. Exposure of 2 weeks in primary medium with 90.5 µM 2,4-D suppressed the shoot tip differentiation temporarily which then regained the ability to form the shoot on withdrawal of 2,4-D. Exposure of 4 weeks in primary medium with 90.5 µM 2,4-D suppressed the shoot tip differentiation irreversibly. No shoot formation was noted from the tips in any of the cultures which were in secondary medium with 13.6 µM 2,4-D. Development of somatic embryos directly from axillary meristems was confirmed histologically. Conversion frequency of these embryos was 11%. Thus, in this report, we describe a method to obtain somatic embryos from the determined organogenic buds of the axillary meristem, by culturing the nodal explant vertically on embryo induction medium. It also displays the possibility of obtaining both embryogenic and organogenic potential in two parts of the same explant simultaneously. The possibility of extending this approach for genetic transformation in in vivo system through direct DNA delivery or Agrobacterium injection in meristems can also be explored. Using Agrobacterium rhizogenes, we have demonstrated the possibility of gene transfer in the axillary meristems of seed-derived plumule explant.

Delivery of noncarrier naked DNA vaccine into the skin by supersonic flow induces a polarized T helper type 1 immune response to cancer

DNA vaccine is a new and powerful approach to generate immunological responses against infectious disease and cancer. The T helper type (Th)1 immune response is usually required for generating effective anti-tumor responses. A microparticulate bombardment system can induce an immune response using very low amounts of DNA. Using nozzle aerodynamics, a low pressure gene gun has been developed to decrease the noise associated with high pressure gene guns. Particles are propelled by supersonic flow through this novel nozzle. To test whether this gun could inoculate a DNA vaccine that stimulates an anti-tumor Th1 immune response, we examined the effect of direct delivery of naked DNA (i.e. without any carrier) on the anti-tumor immune response of mice. The luciferase reporter plasmid DNA was delivered using a low-pressure biolistic device and expressed in C3H/HeN, BALB/c, and C57BL/6 mice. Plasmid DNA expression was mainly in the epidermis. Noncarrier naked neu DNA vaccine and gold particle-coated neu DNA vaccine (at 1 microg per mouse) had similar anti-tumor effects in C3H mice. However, cytokine profile examination showed the Th1-bias of the response induced by naked DNA vaccine and the Th2-bias of the response induced by coated DNA vaccine. A shift in the immune response to favour enhanced tumor rejection can be achieved by skin delivery of naked DNA vaccine.

Direct Delivery and Submicrometer Patterning of DNA by a Nanofountain Probe

Nanopatterning of biological materials has significant potential in life sciences and medicine because highly miniaturized structures provide routes to high-density combinatorial libraries and ways of manipulating biological structures (proteins, viruses, and cells) at the single particle level. Central to the development of this technology is the nanofabrication of arrays of DNA and proteins. Such arrays have influenced the areas of genomics and proteomics because of their ability to simultaneously detect a large number of molecular species or ‘multiplex’. The miniaturization of bioassays has been eagerly pursued in an effort to achieve enhanced performance such as shorter response times, smaller sample volumes, and higher sensitivities. Dip-pen nanolithography (DPN) was developed to write nanoscale patterns directly on substrates. Among the many applications of this technology is the ability to pattern modified oligonucleotides on gold and silicon oxide surfaces. Here, feature sizes can range from a few micrometers to less than 50 nm. In a typical DNA-patterning experiment with DPN, the surfaces of silicon nitride atomic force microscopy (AFM) cantilevers are chemically modified for increased tip hydrophilicity. This step is used to improve the coating efficiency of the DNA molecules. A more attractive way of delivering inks in DPN mode is through the use of microfluidics that can deliver different inks to specific tips within a cantilever array. This approach, when it has been successfully developed, will provide greater flexibility and increased utility of DPN for the generation of combinatorial bioarrays. Other recent approaches to biomolecular patterning include the use of microfluidic components such as reservoirs, microchannels, and small apertures or slots to control the delivery of chemical solutions. Such tools do not require tip coating because samples are directly delivered onto a surface in a solution. However, the reported resolution of microfluidic tools is about 1 lm at best because of limitations from the geometries of the apertures or slots that control the molecular writing mechanisms in these devices. Herein, we present the patterning of DNA molecules on the submicrometer length scale using a volcano-like tip. This eliminates the need for tip-surface modification by implementing direct delivery of a solution containing DNA molecules to the tip. As a microfluidic AFM probe, the nanofountain probe (NFP) was reported to allow high-resolution writing and have advantages for delivery of molecular inks in solution. A feature size as small as 40 nm was demonstrated with thiol molecules. The NFP was microfabricated to integrate an on-chip reservoir, microchannels, and a volcanolike dispensing tip. Following the development of the first generation NFP, a single-probe system, we made augmentations to produce a linear array of 12 NFP cantilevers with two on-chip reservoirs on each side of the chip, Figure 1. The cantilever lengths on each side were 630 and 520 lm, respectively. Each reservoir fed six adjacent cantilevers to achieve simultaneous patterning with two molecular species. The NFP chip was designed to fit commercially available AFM instruments and utilized the instrument scanner, optical detection, and feedback control to engage surfaces. While one cantilever was selected for the feedback control of the chip, the other cantilevers made passive contact with the surface by adjustment of the tilting angle between the array and the substrate. The multiple-tip, double-ink patterning with this linear-array NFP chip was recently demonstrated. More recently, a third generation of the NFP was fabricated. Modifications for this NFP included the possibility of fabrication on silicon-on-insulator (SOI) wafers, improved channel sealing, deeper channels to allow the delivery of larger particles, and more robust fabrication processes that led to enhanced yield and better control of C O M M U N IC A TI O N

Molecular genetic improvement of cereals: transgenic wheat (Triticum aestivum L.)

Only modest progress has been made in the molecular genetic improvement of wheat following the production of the first transgenic plants in 1992, made possible by the development of efficient, long-term regenerable embryogenic cultures derived from immature embryos and use of the biolistics method for the direct delivery of DNA into regenerable cells. Transgenic lines expressing genes that confer resistance to environmentally friendly non-selective herbicides, and pests and pathogens have been produced, in addition to lines with improved bread-making and nutritional qualities; some of these are ready for commercial production. Reduction of losses caused by weeds, pests and pathogens in such plants not only indirectly increases available arable land and fresh water supplies, but also conserves energy and natural resources. Nevertheless, the work carried out thus far can be considered only the beginning, as many difficult tasks lie ahead and much remains to be done. The challenge now is to produce higher-yielding varieties that are more nutritious, and are resistant or tolerant to a wide variety of biotic as well as abiotic stresses (especially drought, salinity, heavy metal toxicity) that currently cause substantial losses in productivity. How well we will meet this challenge for wheat, and indeed for other cereal and non-cereal crops, will depend largely on establishing collaborative partnerships between breeders, molecular biologists, biotechnologists and industry, and on how effectively they make use of the knowledge and insights gained from basic studies in plant biology and genetics, the sequencing of plant/cereal genomes, the discovery of synteny in cereals, and the availability of DNA-based markers and increasingly detailed chromosomal maps.

DNA delivery to the mitochondria sites using mitochondrial leader peptide conjugated polyethylenimine

Some genetic diseases are associated with the defects of the mitochondrial genome. Direct DNA delivery to the mitochondrial matrix has been suggested as an approach for mitochondrial gene therapy for these diseases. We hypothesized that a mitochondrial leader peptide (LP) conjugated polyethylenimine (PEI) could deliver DNA to the mitochondrial sites. PEI-LP was synthesized by the conjugation of LP to PEI using disulfide bond. The complex formation of PEI-LP with DNA was confirmed by a gel retardation assay. In this study, DNA was completely retarded at a 0.4/1 PEI-LP/DNA weight ratio. In vitro delivery tests into isolated mitochondria or living cells were performed with rhodamin-labeled DNA and PEI-LP. In vitro cell-free delivery assay with isolated mitochondria showed that PEI-LP/DNA complexes were localized at mitochondria sites. Furthermore, the PEL-LP/DNA complexes were localized at the mitochondrial sites in living cells. However, a control carrier, PEI, did not show this effect. In addition, MTT assay showed that PEI-LP showed lower cytotoxicity than PEI. These results suggest that PEI-LP can deliver DNA to the mitochondrial sites and may be useful for the development of mitochondrial gene therapy.